Philips GC4219, GC4244 User Manual

Azur

GC4244, GC4243, GC4238, GC4233, GC4223,

GC4219, GC4218

2

ENGLISH 4

GC4244, GC4243, GC4238, GC4233, GC4223, GC4219, GC4218

3

Important

Read these instructions for use carefully before using the appliance and
save them for future reference.

- Never leave the iron unattended when it is connected to the mains.

- This appliance is not intended for use by children.

- Infirm persons should not be allowed to use the appliance without
supervision. Keep an eye on children to make sure that they do not
play with the appliance.

- The soleplate of the iron can become extremely hot and may cause
burns if touched.

- Never use the appliance if it is damaged in any way.

- When you have finished ironing, when you clean the appliance, when
you fill or empty the water tank and also when you leave the iron
even for a short while: set the steam control to position O, put the
iron on its heel and remove the plug from the wall socket.

- If the mains cord of this appliance is damaged, it may only be
replaced by a service centre authorised by Philips in order to avoid
hazardous situations.

Before first use

1 Check if the voltage indicated on the appliance corresponds to

the local mains voltage before you connect the appliance.

C

2 Remove the protective heat cover from the soleplate (types

GC4244 and GC4243 only). Remove any sticker or protective
foil from the soleplate.

3 Let the iron heat up to maximum temperature and pass the

iron over a piece of damp cloth for several minutes to remove
any residues from the soleplate.

B

The iron may give off some smoke when you use it for the first time.This
will cease after a short while.

Preparing for use

Filling the water tank

Never immerse the iron in water.

1 Remove the mains plug from the wall socket.

C

2 Set the steam control to position O (= no steam).

3 Open the cap of the filling opening.

4 Tilt the iron backwards.

ENGLISH4