Philips FWM603, FWM603X User Manual

MP3 Mini Hi-Fi System

�

FWM603X/78

FWM603/55

CONTENTS

Technical specification ..................................................................1-2

Service measurement setup..........................................................1-3

Service aids .................................................................................1-4

Instructions on CD playability ................................................2-1..2-2

Block diagram ................................................................................3-1

Wiring diagram ..............................................................................4-1

Disassembly diagram............ ................................................5-1..5-2

Main board

Circuit diagram ..................................................................6-1..6-2

Layout diagram ..................................................................6-3..6-4

CD board

Circuit diagram .........................................................................7-1

Layout diagram ..................................................................7-2..7-3

MCU board

Circuit diagram .........................................................................8-1

Layout diagram ..................................................................8-2..8-3

Display board

Circuit diagram .........................................................................9-1

Layout diagram ..................................................................9-2..9-3

AMP Board

Circuit diagram. ......................................................................

Layout diagram ..............................................................

Tuner Board

Circuit diagram. ......................................................................

Layout diagram .......................................................................

Exploded view diagram ...............................................................12-1

Mechanical parts list ...........................................................12-2..12-3

Electrical parts list...............................................................13-1..13-3

10-1

10-2..10-3

11-1 11-2

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips.

Published by LX 0914 Service Audio Subject to modification

Version 1.0

3141 785 33940

Speakers

Speaker Impedance 6ohm Woofer 2 x 5.25” Tweeter 2 x 1.75” Dimensions

(W x H x D)

230 x 345 x 279mm

Weight 3.58kg each

Subwoofer

Speaker impedance 6ohm Speaker driver 8” Output power 160W Dimensions

(W x H x D)

270 x 345 x 396mm

Weight 6.28kg

General information

AC power 110 - 127/220 -

240V, 50/60Hz

Operation power consumption

100W

Standby power consumption

<2W

USB direct Version 2.0/1.1 Dimensions

Main Unit (W x H x D) 269 x 311 x 366mm Weight

(without speakers)

7.31kg

Amplifieer

Total output power 600W RMS Frequency response 60 - 16kHz Signal-to- noise ratio >67dB A (IEC) Aux input 1500mV/2000mV

Disc

Laser type Semiconductor Disc diameter 12cm/8cm Support disc CD-DA, CD-R, CD-RW,

MP3-CD, WMA-CD Audio DAC 24Bits / 44.1kHz Total harmonic

distortion

<1.5%

Frequency response

60Hz -16kHz (44.1kHz)

S/N ratio >75dBA

Tuner

Tuning range FM: 87.5 - 108MHz;

AM: 531 - 1602kHz (9KHz); 530 - 1700KHz (10KHz)

Tuning grid 50KHz (FM);

9KHz/10KHz (AM)

Number of presets

40 (FM + AM)

FM 75ohm wire AM loop antenna

TECHNICAL SPECIFICATION

1 - 2

MEASUREMENT SETUP

Tuner FM

1-3

Bandpass

LF Voltmeter

e.g. PM2534

RF Generator

e.g. PM5326

DUT

250Hz-15kHz

e.g. 7122 707 48001

Ri=50:

S/N and distortion meter

e.g. Sound Technology ST1700B

Use a bandpass filter to eliminate hum (50Hz, 100Hz) and disturbance from the pilottone (19kHz, 38kHz).

Tuner AM (MW,LW)

RF Generator

e.g. PM5326

Ri=50:

DUT

Frame aerial

e.g. 7122 707 89001

Bandpass

250Hz-15kHz

e.g. 7122 707 48001

LF Voltmeter

e.g. PM2534

S/N and distortion meter

e.g. Sound Technology ST1700B

To avoid atmospheric interference all AM-measurements have to be carried out in a Faraday´s cage. Use a bandpass filter (or at least a high pass filter with 250Hz) to eliminate hum (50Hz, 100Hz).

Use Audio Signal Disc (replaces test disc 3)

DUT

SBC429 4822 397 30184

S/N and distortion meter

e.g. Sound Technology ST1700B

LEVEL METER

e.g. Sennheiser UPM550

Recorder

Use Universal Test Cassette CrO2 SBC419 4822 397 30069

or Universal Test Cassette

LF Generator

e.g. PM5110

Fe SBC420 4822 397 30071

DUT

S/N and distortion met

e.g. Sound Technology ST170

LEVEL METER

e.g. Sennheiser UPM550

with FF-filter

SERVICE AIDS

1-4

All ICs and many other semi-conductors are susceptible to electrostatic discharges (ESD). Careless handling during repair can reduce life drastically. When repairing, make sure that you are connected with the same potential as the mass of the set via a wrist wrap with resistance. Keep components and tools also at this potential.

WARNING

Safety regulations require that the set be restored to its original condition and that parts which are identical with those specified, be used

Safety components are marked by the symbol

ESD

CLASS 1

LASER PRODUCT

Lead free

INSTRUCTIONS ON CD PLAYABILITY

Customer complaint

"CD related problem"

Set remains closed!

check playability

2 - 1

playability

ok ?

Play a CD

for at least 10 minutes

check playability

playability

ok ?

"fast" lens cleaning

check playability

playability

ok ?

For flap loaders (= access to CD drive possible) cleaning method

4 is recommended

add Info for customer

"SET OK"

return set

1 - 4 For description - see following pages

Exchange CDM

INSTRUCTIONS ON CD PLAYABILITY

2 - 2

PLAYABILITY CHECK

For sets which are compatible with CD-RW discs

use CD-RW Printed Audio Disc....................7104 099 96611

TR 3 (Fingerprint) TR 8 (600µ Black dot) maximum at 01:00

• playback of these two tracks without audible disturbance playing time for: Fingerprint

Black dot from 00:50 to 01:10

• jump forward/backward (search) within a reasonable time

For all other sets

use CD-DA SBC 444A..................................4822 397 30245

TR 14 (600µ Black dot) maximum at 01:15 TR 19 (Fingerprint) TR 10 (1000µ wedge)

• playback of all these tracks without audible disturbance playing time for: 1000µ wedge 10seconds

Fingerprint 10seconds Black dot from 01:05 to 01:25

• jump forward/backward (search) within a reasonable time

10seconds

LIQUID LENS CLEANING

Before touching the lens it is advised to clean the surface of the lens by blowing clean air over it. This to avoid that little particles make scratches on the lens.

Because the material of the lens is synthetic and coated with a special anti-reflectivity layer, cleaning must be done with a non-aggressive cleaning fluid. It is advised to use “Cleaning Solvent

The actuator is a very precise mechanical component and may not be damaged in order to guarantee its full function. Clean the lens gently (don’t press too hard) with a soft and clean cotton bud moistened with the special lens cleaner.

The direction of cleaning must be in the way as indicated in the picture below.

CUSTOMER INFORMATION

It is proposed to add an addendum sheet to the set which informs the customer that the set has been checked carefully - but no fault was found. The problem was obviously caused by a scratched, dirty or copy-protected CD. In case problems remain, the customer is requested to contact the workshop directly. The lens cleaning (method 3) should be mentioned in the addendum sheet.

The final wording in national language as well as the printing is under responsibility of the Regional Service Organizations.

SET BLOCK DIAGRAM

3-1

3CDC CD Loader

PICK-UP MECHA

SANYO : DA-11VF

4 CH

MOTOR DRIVER

(BA5826)

RECORD TIME

(74LVC2G04)

SDRAM

16Mbit

NOR FLASH

SI636165

USB/SD MMC

ROHM

RF AMP+SSP+DSP

(BU9543)

MUX

74VC157

ADC

WMA8781

MCS LOGIC BX8805

MP3/WMA En/De + MCU +USB/CARD

Port Expander 74HC4094

SOUND CONTROL

SW+VOL+EQ

(TDA7468 )

PLL Tuner

Si4730/4731

TIME/CLOCK(H

T1381)

Spectrum analyzers

LED controller

for Light Box

(May use)

AUX

Karaoke(CD3699)

VFD DRIVER

T8862

DISPLAY

VFD

SUBWOFFER

amp

TDA8920

High power

AMP

TDA8920

Mid power amp

TDA8920

SET WIRING DIAGRAM

4-1

5-1 5-1

DISASSEMBLY DIAGRAM

Disman tling of the CDC Modu le and Front Panel

1) Loo sen 1 7 screw s to remo ve th e Cover T op of the s et.

2) Sli de ou t the CDC T ray as sh own i n the dia gram be low w ith

the he lp of a f lat hea d screw d riv er.

4) Loo sen 2 s crews A a nd 2 scre ws B to r emove t he CDC Modu le as i ndica ted.

5) Rem ove 2 s crews a t the bot tom t o separ ate the Fron t Pan el Asse mbly fr om th e plate b ottom .

Front View CDC

Sliding Out The CDC Tray

3) Rem ove t he Cove r Tray CD C as in dicat ed.

Remove CDC Module

Remove Cover Tray CDC

Disman tling of Rear Porti on

1)Re mov e 3 screw s C as indi cat ed to loo sen the Tun er Modu le.

2)Re mov e 9 screw s D&G as in dic ated to l oosen t he Ma in Boar d.

3)Re mov e 8 screw s E&H as in dic ated to l oosen t he AM P Board .

4)Re mov e 3 screw s F as indi cat ed to loo sen the B ott om Cabi net .

5-2 5-2

Disman tling of the PCB Boar d

1) Rem ove 1 4 screw s I as indi cat ed to loo sen the D isp lay Boa rd.

2) Rem ove 1 1 screw s J as indi cat ed to loo sen the K ey Bo ard.

3) Rem ove 2 s crews K a s indic ate d to loos en the US B jac k Board .

CIRCUIT DIAGRAM - MAIN BOARD PART1

6-1

+ 23 hidden pages