Philips FWD796 User Manual
Game console
(example only)
D
E
M
O
•
S
T
O
P
FWD796
Y
Rear of TV
(example only)
Speaker
(right)
Y
Speaker
(left
)
SPEAKER 8
AC MAINNS
DIN
INPUT
SPEAKERS
11 --0127V 220 240V
SL6C3SR
6
Center speaker
Left speaker
Right speaker
Surround
Surround
Use this simple and quick way to
watch your favourite DVD movie
and enjoy your Home Cinema
experience!
Helpful Hints
You only need to make one video connection to your TV in
order to view the DVD playback.
If your TV has S-Video or Component
(Pr Pb Y) video jacks, use one of these
video connections instead for higher
picture quality.
If your TV has only a single Antenna In jack,
you will need an accessory RF modulator. The RF
modulator converts the video from the DVD system
so it can play through the TV’s Antenna connector.
Refer to your owner’s manual for proper
connection.
When listening to TV programs, press AUX/GAME
button on the remote to set the DVD system to AUX mode
in order for the sound to be heard.
AV IN
2
2
1
1
6
Make sure your DVD system and TV are connected and turned on!
4
ALL
Plug & Play
1 Turn on the system.
“AUTO INSTALL - PRESS PLAY” will be displayed.
2 Press PLAY 2; on the system to start installation.
Playing a disc
3 Press DISC1/2/3 on the remote control.
You can also select the DISC (DISC1
020
3) on the front panel.
4 Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).
5 Press OPEN
the corresponding OPEN
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face
down.
0
CLOSE 0 on the front of the DVD system and load discs, then press
0
CLOSE 0 again to close the disc tray.
6 Playback will start automatically.
If a disc menu appears, use
then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow
the instructions given in the disc menu.
1/¡/5/4 buttons on the remote to make the necessary selection,
7 To stop playback, press STOP 9.
Playing Game
8 Press AUX/GAME to select GAMEPORT mode.
9 Turn on the TV and select the correct Video In mode.
10 Press MIX-IT to mix the game sound to your desired music source.
11 Start playing your favorite game.
Region Codes
DVDs must be labeled for ALL regions or Region 4 ,
in order to play on this DVD system.
You should find the below accessories in the packaging box.
Audio cables
(white, red)
Composite video cable
(yellow)
component video cables
(red, blue, green)
AA size
batteries
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
MW loop
antenna
DIN out cable
FM wire antenna
AC power cable
Loading...