Philips FWD790-21, FWD790-21M User Manual

FWD790

DVD Mini-HiFi System

México

No abrir, riesgo de choque eléctrico

Verifique que el voltaje de alimentación

sea el requerido para su aparato

ATENCIÓN

Para evitar el riesgo de choque eléctrico, no quite la tapa.

En caso de requerir servicio, dirijase al personal calificado.

PRECAUCIÓN - ADVERTENCIA

AVISO IMPORTANTE

Philips Mexicana, S.A. de C.V.no se hace

responsable por daños o desperfectos causados por:

– Maltrato, descuido o mal uso, presencia de

insectos o roedores (cucarachas, ratones etc.).

– Cuando el aparato no haya sido operarado

de acuerdo con el instructivo del uso, fuera de los valores nominales y tolerancias de las tensiones (voltaje), frecuencia (ciclaje) de alimentación eléctrica y las características que deben reunir las instalaciones auxiliares.

– Por fenómenos naturales tales como:

temblores, inundaciones, incendios, descargas eléctricas, rayos etc. o delitos causados por terceros (choques asaltos, riñas

, etc.).

Es necesario que lea cuidadosamente su instructivo de manejo.

Descripción: Minisistema de Audio Modelo : FWD790/ 21, FWD790/ 21M Alimentación: 110–127 / 220–240V; ~50–60 Hz Consumo: 85 W Importador: Philips Mexicana, S.A. de C.V. Domicilio: Av. La Palma No.6

Col. San Fernando La Herradura Huixquilucan

Localidad y Tel: Edo. de México C.P. 52784

Tel.52 69 90 00

Exportador: Philips Electronics HK, Ltd. País de Origen: China Nº de Serie: ______________________________

LEA CUIDADOSAMENTE ESTE INSTRUCTIVO

ANTES DE USAR SU APARATO.

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

4 5

8 9

∞

≤

™

)

(

PLUG & PLAY-for tuner installation

Index

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro-logic” and the double-D symbol are trade-

marks of Dolby Laboratories.

English ------------------------------------------------ 6

English

Français -------------------------------------------- 50

Français

Español --------------------------------------------- 94

Español

---------------------------------------------- 138

MANUFACTURED UNDER LICENSE FROM DIGITAL

THEATER SYSTEMS, INC. US PAT. NO 5,451,94;

5,956,674; 5,974,380; 5,978,762; 6,226,616;6,487,535

AND OTHER U.S. AND WORLDWIDE PATENTS ISSUED

AND PENDING. “DTS” AND “DTS DIGITAL SURROUND”

ARE REGISTERED TRADEMARKS OF DIGITAL THEATER

This product incorporates copyright protection technology

that is protected by method claims of certain U.S. patents

and other intellectual property rights owned by Macrovision

Corporation and other rights owners. Use of this copyright

protection technology must be authorized by Macrovision

Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorized by

Macrovision Corporation. Reserve engineering or disassem-

bly is prohibited.

Contents

English

General Information/ Maintenance

Features .................................................................. 8

Discs for playback ................................................ 8

Region codes

Supplied accessories ............................................ 8

Environmental information ................................ 9

Care and safety information .............................. 9

Connections

Step 1: Placing speakers .................................... 10

Step 2: Connecting speakers ............................ 10

Step 3: Connecting TV set ......................... 11~12

Using Video In jack (CVBS) Using Component Video In jack (Pr Pb Y) Using S-Video In jack Using an accessory RF modulator

Step 4: Connecting FM/MW antennas ........... 13

Step 5: Connecting the power cord ............... 13

Step 6: Connecting a VCR or cable/satellite

box ......................................................................... 14

Step 7: Connecting digital audio equipment . 14

Step 8: Connecting to game console ............. 14

Functional Overview

Controls on the system ............................. 15~16

Remote control ........................................... 16~17

Basic Functions

Plug and Play (for tuner installation) .............. 18

Demonstration mode ........................................ 18

Preparations

Step 1: Inserting batteries into the remote

control .................................................................. 19

Step 2: Setting the clock ............................ 19~20

Step 3: Setting the TV set ................................. 20

Step 4: Setting speakers .................................... 21

Step 5: Setting language preference ................ 21

Game Operations

Preparation before use ..................................... 22

Starting Operation ............................................. 22

Disc Operations

Playing discs ......................................................... 23

Using the disc menu .......................................... 23

Basic playback controls ..................................... 24

Skipping to another title (track)/chapter Fast search Continuing playback from the last stop point

Selecting various mode functions ............ 24~25

Repeat play mode Shuffle play mode Repeating a section within a chapter/track

Programing favorite tracks ............................... 25

Changing discs during playback ....................... 26

Special DVD/VCD features....................... 26~28

Changing subtitle language Changing sound track language Searching for a particular passage Displaying the disc information during playback Moving to another title (track) / chapter Playing from a selected point Playing in slow motion mode Zooming in Viewing from another angle Advancing by frames Setting Speaker Checking the contents of DVD

Special VCD/SVCD features ............................ 28

Playback control (PBC)

MP3/ WMA/DivX/ Picture Disc Operations

Playing MP3/ WMA/ Picture disc (Kodak, JPEG)

................................................................................ 29

Playing DivX disc ................................................ 30

DVD Menu Operations

Using the menu bar ........................................... 31

Using the setup menu ................................ 32~36

Setting the TV shape Setting the screen saver Setting the digital output Setting the PCM output Night mode - turning on/off Test Tone DivX(R) VOD Changing the password Restricting playback by setting parental level

Contents

Tuner Operations

Tuning to radio stations .................................... 37

Presetting radio stations ............................ 37~38

Automatic preset programming Manual preset programming

Selecting a preset radio station ....................... 38

Deleting a preset radio station

Changing tuning grid .......................................... 38

Ta pe Operation/Recording

Ta pe playback ...................................................... 39

General information on recording ................. 39

Preparation for recording ................................ 40

Disc synchro recording..................................... 40

Clock/Timer Operations

Viewing clock ...................................................... 41

Setting the timer .......................................... 41~42

Viewing timer ...................................................... 42

Setting the sleep timer ...................................... 42

Sound and Volume Controls

Sound control ..................................................... 43

Selecting surround sound wOOx Selecting sound effect

Volume control ................................................... 43

Changing the volume level Switching off the volume temporarily Listening through headphones

Specifications ........................................... 46

English

Tr oubleshooting ............................. 47~48

Glossary ......................................................... 49

Other Functions

Switching on/off .................................................. 44

Switching the system on Switching the system to standby mode Switching to eco power standby mode Power saving automatic standby

Dimming the display .......................................... 44

Vocal ...................................................................... 44

Key control .......................................................... 45

Echo ....................................................................... 45

Karaoke ................................................................ 45

Listening to external sources .......................... 45

General Information/Maintenance

ALL

English

Features

Your DVD Mini Hi-Fi System with 2-channel full digital amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology.

Other features include:

Built-in DTS and Dolby Digital decoder, supporting virtual surround and stereo.

Additional Component Connections

Lets you connect other audio and audio/visual components to the system so you can use the system’s surround sound speakers.

Night mode

Lets you compress the dynamic range, reducing the difference in loudness between different sounds in Dolby Digital mode.

Parental control (rating level)

Lets you set a rating level so that your children cannot watch a DVD that has a rating higher than you set.

Sleep timer

Enables the system to switch to standby mode automatically at a preset time.

Discs for playback

Your DVD Mini Hi-Fi System will play:

– Digital Video Discs (DVDs) – Video CDs (VCDs) – Super Video CDs (SVCDs) – Digital Video Discs + Rewritable (DVD+RW) – Compact Discs (CDs) – Picture (Kodak, JPEG) files on CDR(W) – DivX(R) disc on CD-R(W): – DivX 3.11, 4.x and 5.x – WMA – Supported MP3-CD format.

• ISO 9660 / UDF format

• Max. title/album name –12 characters

Max. title number plus album is 255.

• Max. nested directory is 8 levels.

• The max. album number is 32.

• The max. MP3 track number is 999.

• Supported sampling frequencies for MP3 disc:

32 kHz, 44.1 kHz, 48 kHz.

• Supported Bit-rates of MP3 disc are: 32, 64, 96, 128, 192, 256 (kbps).

– Following formats can’t be supported

• The files like *.VMA, *.AAC, *.DLF, *.M3U, *.PLS, *.WAV

• Non-English Album/Title name

• The discs recorded under Joliet format

• MP3 Pro and MP3 with ID3 tag

Region codes

DVDs must be labeled for ALL regions or for Region 3 in order to play on this system. You

cannot play discs that are labeled for other regions.

Notes: –For mixed mode discs, only one mode will be selected for playback according to the recording format. – If you are having trouble playing a certain disc, remove the disc and try a different one. Improperly formatted discs will not play on this system.

Supplied accessories

– Composite video cable (yellow)

– Component video cables

(red/blue/green)

– Audio cables (white, red)

– FM wire antenna

– MW loop antenna

– Remote Control and

two AA batteries

–AC power cable

– This instruction booklet and a Quick Use Guide

General Information/Maintenance

10 cm

(4 inches)

10 cm

(4 inches)

10 cm

(4 inches)

DVD Mini Hi-Fi System

CBABC

Environmental information

Any unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).

Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Care and safety information

Avoid high temperatures, moisture, water and dust

● Do not expose the system, batteries or discs to

humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep disc trays closed to avoid dust buildup on the lens.

● No objects filled with liquids, such as vases, shall

be placed on the apparatus.

● No naked flame sources, such as lighted candles,

should be placed on the apparatus.

Avoid condensation problem

● The lens may cloud over when the player is

suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the player in the warm environment until the moisture evaporates.

Do not block the vents

● Do not operate the system in an enclosed

cabinet and allow about 10 cm (4 inches) of free space all around the player for adequate ventilation.

● The ventilation should not be impeded by

covering the ventilation openings with items, such as newspapers table-cloths, curtains, etc.

Cleaning the cabinet

● Use soft cloth slightly moistened

with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Cleaning discs

● To clean a CD, wipe it in a straight line from the

center towards the edge using soft and lint-free cloth. A cleaning agent may damage the disc.

● Write only on the printed side of a CDR(W)

and only with a soft felt-tipped pen.

● Handle the disc by its edge. Do not touch the

surface.

Cleaning the disc lens

● After prolonged use, dirt or dust may accumulate

at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.

Finding a suitable location

● Place the player on a flat, hard, stable surface.

Cleaning the head and the tape paths

● To ensure good recording and playback quality,

clean the head A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation.

● Use a cotton swab slightly moistened with

cleaning fluid or alcohol.

● You also can clean the head by playing a cleaning

tape once.

English

Demagnetising the head

● Use a demagnetising tape available at your dealer.

Connections

Speaker

(right)

Speaker

(left)

English

Step 1: Placing speakers

Place the front left and right speakers at equal distances from the TV set and at an angle of approximately 45 degrees from the listening position.

Notes: –To avoid magnetic interference, do not position the front speakers too close to your TV set. – Allow adequate ventilation around the DVD Mini Hi-Fi System.

Step 2: Connecting speakers

Connect the speaker wires to the SPEAKERS (FRONT) terminals, right speaker to “R” and left speaker to “L”, coloured (marked) wire to “+” and black (unmarked) wire to “–”. Fully insert the stripped portion of the speaker wire into the terminal as shown.

Front Left (L)

Speakers

Front Right (R)

Notes: –For optimal sound performance, use the supplied speakers. – Do not connect more than one speaker to any one pair of +/- speaker terminals. – Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

––––

Black

White

Red

IMPORTANT! The type plate is located on the rear of the system.

To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it.

Step 3: Connecting TV set

Connections

English

IMPORTANT! –You only need to make one video connection from the following options, according to the capabilities of your TV system. – S-Video or Component Video connection provides higher picture quality. These options must be available on your TV set. – Connect the system directly to the TV set.

Using Video In jack (CVBS)

● Use the composite video cable (yellow) to

connect the system’s VIDEO jack to the video input jack (or labeled as A/V In, Video In, Composite or Baseband) on the TV set.

● To listen to TV channels through this system, use

the audio cables (white/red) to connect AUX IN (L/R) jacks to the corresponding AUDIO

OUT jacks on the TV set.

Using component Video In jack (Pr Pb Y)

● Use the component video cables (red/blue/

green) to connect the system’s Pr Pb Y jacks to the corresponding Component video input jacks (or labeled as Pr/Cr Pb/Cb Y or YUV) on the TV set.

● To listen to TV channels through this system, use

the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT

jacks on the TV set.

Connections

English

Using S-Video In jack

● Use the S-Video cable (not supplied) to connect

the system’s S-VIDEO OUT jack to the SVideo input jack (or labeled as Y/C or S-VHS) on the TV set.

● To listen to TV channels through this system, use

the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT

jacks on the TV set.

IMPORTANT! – If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

Using an accessory RF modulator

● Use the composite cable (yellow) to connect the

system’s VIDEO jack to the video input jack on the RF modulator.

● Use the RF coaxial cable (not supplied) to

connect the RF modulator to your TV’s RF jack.

Connections

antenna

fix the claw

into the slot

VOLTAGE

SELECTOR

110V ~127V

220V~240V

~ AC MAINS

AUDIO

OUT

Pr/Cr

Pb/Cb

S-VIDEO

VIDEO IN

COMPONENT VIDEO IN

Step 4: Connecting FM/MW

antennas

● Connect the supplied MW loop antenna to the

MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall.

● Connect the supplied FM antenna to the FM

jack. Extend the FM antenna and fix its end to the wall.

For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA terminal.

Step 5: Connecting the power

cord

After everything is connected properly, plug in the AC power cord to the power outlet.

Never make or change any connection with the power switched on.

On the DVD Mini Hi-Fi System

“AUTO INSTALL-PRESS PLAY” may appear on the display panel. Press 2; on the front panel to search and store all available radio stations or press 9 to exit (See page 37, Tuner OperationsPresetting radio stations).

If your system is equipped with a Voltage Selector, set the VOLTAGE SELECTOR to the local power line voltage.

English

Notes: – Adjust the position of the antennas for optimal reception. –Position the antennas as far as possible from your TV set, VCR or other radiation sources to prevent unwanted interference.

Connections

COMPONENT

VIDEO IN

AUDIO

OUT

VIDEO IN

S-VIDEO

Pr/Cr

Pb/Cb

English

Step 6: Connecting a VCR or

cable/satellite box

Viewing and listening to playback

1 Connect the VCR or Cable/Satellite Box to the

TV system as shown.

2 Connect the system’s AUX IN jacks to the

AUDIO OUT jacks on the VCR or Cable/ Satellite box.

Before starting operation, press AUX/GAME on the remote control to select “AUX” in order to activate the input source.

Step 7: Connecting digital audio

equipment

Recording (digital)

Connect the system’s DIGITAL OUT jack to the DIGITAL IN jack on a digital recording device (DTS-Digital Theater System compatible, with a Dolby Digital decoder, for example).

Before operation, set the DIGITAL OUTPUT according to the audio connection. (See Using the Setup Menu – Setting the digital output).

Step 8: Connecting to game

console

Using the VCR for recording DVDs

Some DVDs are copy-protected. You cannot record or dub protected discs using a VCR.

3 Connect the system’s VIDEO jack to the VIDEO

IN jack on the VCR.

4 Connect the system’s LINE OUT (R/L) jacks

to the AUDIO IN jacks on the VCR. This will allow you to make analog stereo (two channel, right and left) recording.

To view DVD playback while recording

You must connect the system to your TV system using the S-VIDEO (as shown above) or the Component (Pr Pb Y) video connection.

IMPORTANT! – Gameport inputs are for the game console only.

● Use the game console’s video cable (not

supplied) to connect its video output to the GAMEPORT- VIDEO terminal.

● Use the game console’s audio cable (not

supplied) to connect its audio output to the GAMEPORT- AUDIO L./ AUDIO R. terminals.

● Use the video cable (yellow) to connect the

VIDEO OUT terminal to the video input on the TV for viewing.

Notes:

- On the TV, the Video Input jack is usually yellow

and might be labeled A/V In, CVBS, composite or Baseband.

- To avoid magnetic interference, do not position the

front speakers too close to your TV.

Functional Overview

Controls on the system

1 ECO POWER/ STANDBY ON

– to switch the system on, to Eco Power or

Standby mode.

2 DISPLAY SCREEN

– to view the current status of the system.

3 SOURCE

– to select the following:

DISC (DISC 1•2•3)

– to select disc tray 1, 2 or 3

TUNER (BAND)

– to select waveband: FM or MW.

TAPE (TAPE 1-2)

– to select tape deck 1 or 2.

AUX•GAME

– to select a connected external source: TV/CDR,

AUX (auxiliary) or Gamepor t mode.

4 PREV / PRESET / NEXT O P

(TITLE – / +)

for DISC .................... to select previous/next title,

chapter or track during playback.

for TUNER ............... to select a preset radio

station.

for CLOCK .............. to set the hour.

5 SEARCH•TUNING 1 / ¡

(ALBUM – / +)

for DISC .................... to search backward/forward.

to select previous/next album in MP3/WMA stop

mode (with MENU ON).

for TAPE ..................... to rewind or fast forward.

for TUNER ............... to tune to a lower or higher

radio frequency.

for CLOCK .............. to set the minute.

6 MIC VOL./ MIC IN

– to adjust the mixing level for karaoke or

microphone recording.

– to connect microphone jack.

7 38 (PLAY/PAUSE)

for DISC .................... to star t or interrupt playback.

for TAPE ..................... to start playback.

for PLUG&PLAY ... (on the system only) to initiate

plug & play mode.

8 DEMO•STOP 7

for DISC .................... to stop playback or to clear a

programme.

for DEMO ................(in Standby or ECO power

mode) to activate/deactivate demonstration.

for PLUG&PLAY ... (on the system only) to exit

plug&play mode.

9 wOOx

– Selects different type of enhanced wOOx sound

settings (wOOx 1, wOOx 2, wOOx 3 or wOOx OFF ).

0 DISPLAY

– to display disc information during disc playback.

! CLOCK

– to view or to set clock.

@ TIMER

– to view or to set timer.

# TAPE DECK 1/ 2 $ 0 OPEN

– to open the tape deck door.

% AUTO REPLAY

–to select continuous playback in either AUTO

PLAY or ONCE mode only.

^ RECORD

– to start recording on tape deck 2.

& VIDEO

– use a video cable to connect to your game

console’s video output

AUDIO L./ AUDIO R.

– use an audio cable to connect to your game

console’s left/right audio output.

* SOUND

- to select various sound effect.

SURROUND

- to select various surround sound effect.

AUDIO

- to select the preferred language for audio

- to select AUDIO channel in karaoke mode.

MIX IT

- to mix the game sound with your favorite music from one of the music sources (DISC, TUNER, TAPE1/2 or AUX)

GAME

- to select different type of equaliser setting for Gameport (SPEED, PUNCH or BLAST).

GAME SOUND

- to adjust the game’s output volume level.

English

+ 34 hidden pages