Philips FWD132-98 User Manual

FWD132/98

Use this simple and quick way to
watch your favourite DVD movie

and enjoy your Home Cinema

experience!

OUT

IN

ALLALL

3

WMA

Make sure your DVD system and TV are connected and turned on!

Playing a disc
1 Ajust the source switch on front of the system to select the disc mode.
2 Turn on the TV and select the correct Video In mode.

You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).

3 Press OPEN/CLOSE ? on the front of the DVD system (or remote control) and

load a disc, then press the corresponding OPEN/CLOSE ? to close the disc tray.

Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up.

4 Playback will start automatically.

If a disc menu appears, use
selection, then press OK to confirm. Or, use the numeric keypad on the remote to select features.
Follow the instructions given in the disc menu.

5 / 4 / A / B buttons on the remote to make the necessary

5 To stop playback, press STOP 9.

Region Codes

DVDs must be labeled for ALL regions or Region 3,
in order to play on this DVD system.

You should find the below accessories in the packaging box.

Audio cables (white, red)Composite video cable

(yellow)

Batteries (2 x AA)

Remote control

Detailed playback features and additional functions are described in the

accompanying owner’s manual