If this instruction manual does
not give an answer or if ‘Tips’ do
not solve your TV problem, you
can call your Local Philips
Customer or Service Centre. See
the supplied World-wide
guarantee booklet.
Please, have the Model and
Product number which you can
find at the back of your
television set or on the
packaging, ready, before calling
the Philips helpline.
Model: FTR 9965/69S
Product No: AG ....................................
Philips is paying a lot of attention to
producing environmentally-friendly in
green focal areas.Your new TV contains
materials which can be recycled and
reused. At the end of its life specialised
companies can dismantle the
discarded TV to concentrate the
reusable materials and to minimise
the amount of materials to be
disposed of.
Please ensure you dispose of your old
TV according to local regulations.
Connect peripheral equipment
Connecting and selecting equipment .................................16-17
Audio and Video equipment keys ............................................. 19
Record with your recorder with Easy Link ........................... 19
EasyLink features are based on the “one touch operation” approach.This
means that a sequence of actions are executed at the same time in both the
television and the video cassette recorder, provided both are fitted with the
EasyLink function and connected with the eurocable supplied with your video
recorder.
1
Page 2
Preparation
2AA
MENU
OK
VOLUME
CH/PR
& Place the receiver box wherever you want, but
make sure that air can circulate freely through
the ventilation slots. Do not install the receiver
box in a confined space such as a book case or a
similar unit.
min.
1 m
To prevent any unsafe situations, no naked flame
sources, such as lighted candles, should be
placed on or in the vicinity. Avoid heat, direct
sunlight and exposure to rain or water.
The equipment shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on it.
é Connect the supplied aerial cable 1 and the
VGA cable with trailing audio cinch connectors
2 as shown in the inside frontcover of this
handbook. Make sure all screws of the cable 2
are tightened well.
TV receiver box with speakerless monitor
In case you connect your TV receiver box with a
speakerless monitor, and without having
connected an audio receiver, all references made
in this instruction book to sound reproduction,
volume control, and audio connections, are not
applicable (except for a headphone connection).
The keys on the remote control referring to
sound have no function either.
“ To connect your computer, see the separate
supplied instruction manual with your monitor.
To connect other peripherals, see p. 16.
If you dispose of a Cinema Link combination
(Cinema Link Audio receiver and/or Cinema
Link video recorder and/or DVD player), see
the separate supplied instruction manual.
In order to obtain the best result, please use
only the supplied antenna cables between the
receiver box and videorecorder, and between
videorecorder and antenna connector.
Note: CinemaLink via the scart to cinch adapter is
NOT possible.
‘ Insert the mains cord supplied 3 into the
MAINS at the back of the monitor and the
mains cord 4 at the back of the receiver. Put
both in the wall sockets.
( Remote control:Insert the 2 batteries
supplied (Type R6-1,5V).
The batteries supplied do
not contain the heavy
metals mercury and
cadmium. Please check on
how to dispose of exhausted
batteries according to local
regulations.
§ Switch the TV on :Press the power switch A
at the right side of the monitor and the one on
the front of your receiver box.An indicator on
the front of the TV lights up and the screen
comes on. If the TV is in standby mode, press the
-P+ keys or the red B key on the remote
control.
Keys in front of the TV receiver box
Should your remote be lost or broken you can still
change some of the basic settings with the keys in front
of the TV receiver box.
Press:
• the VOLUME- or + key to adjust the volume;
• the
sources.
The
without the remote control.
Use:
• the V - and + keys and the
keys to select menu items in the directions as shown;
• the
Note:
When activated via the
receiver box, only
Navigate to
2
2
TV
Setup
Install
Exit
Picture Sound Features
-CH/PR+ keys to select the TV channels or
MENU key can be used to summon the main menu
CH/PR- and CH/PR+
MENU key to confirm your selection.
MENU key in front of the TV
Exit lets you dismiss the menu.
Exit and press the MENU key.
Page 3
B
b
¬
+
-
V
+
-
P
v
b
i
0
h
q
Select
VCR DVD SAT AMP CD
MENU
OK
123
456
789
0
Ò®‡π
†
Active Control
S
®
®
®
®
æ
Use of the remote control RC4301
Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it.
When a key enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.
The list will be removed automatically after 4 seconds or press
Remark: in VGA mode only some keys are valid. See VGA menu, p. 18.
VCR DVD SAT AMP CD
See ‘Audio- and Video equipment
keys’, p. 19.
v Select your computer or
other peripherals
See p. 17.
®Ò‡π†
Audio and Video equipment keys,
see p. 19.
® Instant record
See Record with your recorder
with EasyLink, p. 19.
U Time display
The time is displayed on the screen.
Q Surround mode
Press this key repeatedly to select
on/off.
Ì
See separate Cinema Link booklet
supplied.
æ No function
S Freeze/Replay/Photo finish
Cinema Go
See p. 8.
OK to remove immediately.
B Standby
Press to switch the TV on or off.
When switched off, a red indicator on
the TV lights up.
x Pixel Plus demo on/off
In the right part Pixel Plus and Digital
Natural Motion are switched on.
b Teletext On/Off see p. 14
Press the b key to show teletext on
the right half of the screen.
OK Press this key
• to activate your choice, when in the
menus.
• to display the programme list.
MENU Main menu on/off see p. 5
V To adjust the volume.
¬ Interrupt the sound or restore it.
P Programme selection
To browse through the TV channels
and sources stored in the favourite
list.
0/9 Digit keys
To select a TV channel.
For a two digit programme number,
enter the second digit before the dash
disappears.To switch immediately to a
selected one digit TV channel, keep
the digit key pressed a bit longer.
Note : In case you connect your TV receiver box with a speakerless monitor and without having connected an audio
receiver, the keys on the remote control referring to sound have no function.
3
3
Page 4
B
b
¬
+
-
V
+
-
P
v
b
i
0
h
q
Select
VCR DVD SAT AMP CD
MENU
OK
123
456
789
0
Ò®‡π
†
Active Control
S
®
®
®
®
æ
i On Screen information
Press to display information about the selected TV channel and
programme.
0 Smart surf
With this key you can easily switch between 2 up to 9 different TV
channels or sources. See General, Smart surf, p. 8.
Press the
OK key or wait for the time out to dismiss the Smart surf
display.
b Dual screen / PIP / Multipip
See p. 8 and p. 13.
h Active control see p. 11.
q Picture format
Press this key repeatedly or press the cursor up/down to select another
picture format:Auto format, Super zoom, 4:3, Movie Expand 14:9, Movie
Expand 16:9, Subtitle zoom or Wide screen.
Auto formatSuper zoom4:3Movie Expand 14:9
Movie Expand 16:9Subtitle zoomWide screen
Auto format makes the picture fill the screen as much as possible.
In case of subtitles in the bottom black bar,Auto format makes the
subtitles visible. If subtitles are only partly visible, press cursor up.
In case of a broadcaster logo in the corner of the top black bar, the logo
disappears from the screen.
Super zoom removes the black bars on the sides of 4:3 programs with
minimal distortion.
When in Movie Expand 14:9, 16:9, Super zoom or Subtitle zoom picture
format, you can make subtitles visible with the cursor up/down.
Note: in VGA mode press the q key to switch between a 4:3 or a Wide screen
picture format.
4
Page 5
To use the menus
B
b
¬
+
-
V
+
-
P
v
Select
VCR DVD SAT AMP CD
MENU
OK
Ò®‡π
†
S
®
®
®
®
æ
cursor to select
adjustments
OK key to
activate
return or switch
main menu on/off
& Press the MENU key on the remote control to summon the
main menu.At any moment you can exit the menu by
pressing the
MENU key again.
Note: If you have connected equipment with Cinema Link, more
menu items are present.
Picture Sound Features
TV
Setup
Install
é Use the cursor in the up/down direction to select the
TV,
Setup or Install menu.
Use the cursor left/right to select
Picture, Sound or
Features.
Note: Sometimes not all the menu items are visible on the screen
(indicated by a cluster of blue balls). Use the cursor down or right
to reveal all items.
“ Use the cursor in the left/right direction to select the menu
item.
‘ Use the cursor up/down again to select the control you
want to select or to adjust.
Note: Items temporary not available or not relevant are displayed in a
light grey colour and cannot be selected.
Installation
The installation menu contains the following items:
Language Automatic Manual Give name Reshuffle Favourite
install install programmes
Install
EasyLink
If your video recorder has an EasyLink function, during installation, the language and available channels are
automatically transmitted to the video recorder.
Select the menu language
Install
Language
English
Deutsch
...
& Press the MENU key on the remote control.
é Use the cursor down to select
“ Use the cursor right to select
Install.
Language.
Follow the instructions on screen.
‘ Use the cursor up/down to select your preferred language
and press the
( Proceed with the
OK key to confirm your selection.
Install menu.
5
Page 6
Store TV channels
After language are set correctly, you can now search for and store the TV channels in two different ways:
using Automatic Installation or Manual Installation (tuning-in channel by channel).
Select your choice with the cursor right.
Automatic installation
Automatic install
Install
InstallStart
Manual installation
Manual install
Install
Selection mode
System
Programme
Search
Fine tune
Store
& Select Automatic install in the Install menu.
Note: All channels must be unlocked in order to autoprogram. If
requested, enter your code to unlock all channels. (See TV,
Features menu, Childlock, p. 12.)
é Press the cursor down.
The autoprogramming option label
Start appears.
“ Press the cursor right.
‘ The message
Searching appears and the progress of
autoprogramming is displayed.
When the Automatic installation is complete, the puck navigates
to
Install again. The channel list is automatically filled with all
the channels numbers of the TV channels transmitted.
Note: Channels numbers and names will always be written in Latin
characters, even when a language has been selected which uses
other characters.
Searching for and storing TV channels is done channel by
channel.You must go through every step of the Manual
Installation menu.
& Select
Manual install in the Install menu.
é Press the cursor down.
Follow the instructions on screen.
Note: Search or direct selection of a TV channel.
If you know the frequency, the C- or S-channel number, enter the
3 or 2 digits of the frequency or the channel number directly with
the digit keys 0 to 9 (e.g. 048). Press the cursor down to proceed.
Repeat to search for another TV channel.
6
Page 7
Give name
Install
It is possible to assign a name to a TV channel.
A name with up to 5 letters or numbers can be
given to the programme numbers 0 to 99.
Note : It is not possible to rename the VGA source.
& Select
press the cursor down.
é Select the programme number.
Note: keep the cursor up/down pressed to scroll
through the programme list quickly.
Give name
VCR1
BBC1
BBC2
CNN
TVE
.....
Give Name in the Install menu and
® Space® Delete
pπ
ABCDEFG123
HIJKLMN456
OPQRSTU789
VWXYZ0
® Shift® Special
Reshuffle the programme list
You can change the order of the stored TV channels.
“ Press the cursor right.
A keyboard appears on the screen. Only
European characters are displayed.
Press the cursor right to enter the keyboard.
Press the cursor up/down, left/right to select
the first character and press
OK. Repeat for
every character you want to enter.
Select
Space to enter a space; Delete to erase
the highlighted character in the name entered;
Shift to display upper- or lowercase characters
on the keyboard;
characters on the keyboard. Press
Special to display special
OK to
confirm.
Note: Dependent on the language selected in the
Language menu, the key
Special is available or
not.
‘ Press the cursor left repeatedly when you have
finished the name giving.
Select another programme number and repeat
(
steps
“ to ‘.
& Select
Reshuffle in the Installation menu.
é Follow the instructions on screen.
Select Favourite TV channels
A VGA source always belongs to the list of Favourite programmes.
& Select
é Select your programme number with the cursor up/down.
“ Select
‘ Repeat é and “ for every TV channel or external you want to make a favourite or a non-favourite
Favourite programmes in the Install menu.
Ye s or No with the cursor right.
TV channel or external.
7
Page 8
TV Setup
Setup
General Source
The Setup menu contains items that control the settings
of the TV’s functions, features, services and peripherals
you may have connected.
The
General menu allows you to change settings that
will typically be accessed only occasionally.
The
Source menu allows you to select a source.
General
General
Setup
Menu background
Smart surf
Dual screen format
Freeze format
Factory settings
OSD
Programme title
Teletext level 2.5
Set/Change code
This menu allows you to change various settings that are
presumably adjusted less frequently than most other
settings.
Menu background
Select
Ye s or No to turn the menu background on
or off.
Smart surf
& Select
Smart surf.
é With the cursor right, select
•
2 programmes if you want the 0 key to
toggle between the current and the
previously selected channel,
•
9 programmes if you want the 0 key to
summon a list of up to 9 channels which can
be selected.
To add/remove a channel or source:
Tune to the channel or source you wish to add
or remove. Press the 0 key and press the
cursor right to add or remove.
Note: If there are already 9 channels/sources in the
list, the one at the bottom of the list will be
removed.
Dual screen format (not available for HD sources)
This menu allows you to select the preferred
format which can then be displayed toggling the
b key on and off.
See Dual screen/PIP/ Multipip, p. 13.
Select
Dual screen, PIP, Large PIP, Medium PIP
or Small PIP, PIP 3, PIP 8 or PIP 12 with the
cursor up/down.
When Dual screen mode is activated with the
remote control b key, and when:
•
Dual screen is selected, the TV splits the screen
into two equally sized screens.
• Large PIP, Medium PIP or Small PIP is selected,
the TV shows a full screen of video with a small,
medium or large window of video on top of it;
•
PIP3, PIP8 or PIP12 is selected, the TV will display
3, 8 or 12 PIP screens.
Note : Continuing to hold the b key down will also cycle
the TV through the Dual screen and the various PIP sizes.
Freeze format
This function is not possible with a VGA source.
Freeze format allows you to select among three
options:
Freeze, Replay or Photo finish, to be
activated when you press the S key on the remote
control. See p. 3.
Note: Continuing to hold the S key down will also cycle
the TV through the various formats. Changing the format
this way does not store the selected format.
Factory settings
This resets the picture and sound settings to their
predefined factory values, but maintains the channel
installation settings.
OSD (On Screen Display)
& Select
é Select
OSD.
Normal to activate extended channel and
programme information.
Minimum will display
reduced channel information.
Note: When subtitles is switched on, see Features,
p.12, continuous display of the programme number is
not possible
Programme title
Select
Programme title Yes or No.
When selected
Ye s , after the selection of a TV
programme or after pressing the i key on the
remote control, a TV channel which broadcasts
teletext may transmit the name of the TV channel or
the programme title.
When selected
No, the programme title will only
appear after pressing the i key, and not after the
selection of a TV channel.
8
Page 9
Teletext level 2.5
Some broadcasters offer the opportunity to see
more colours, other background colours and nicer
pictures in the teletext pages.
& Select
é Press the cursor right to select
Teletext level 2.5.
to take advantage of this feature.
2.5 On
Teletext level
“ Press the cursor right again to select Teletext
level 2.5 Off
if you like the more neutral
teletext layout.
The selection made is valid for all channels
which broadcast teletext level 2.5.
Note: It may take a few seconds before teletext
broadcast switches over to Teletext level 2.5.
Set/Change code
The Child lock feature (see TV, Features, p. 12)
allows you to lock channels to prevent others from
watching certain programmes.To watch locked
channels, a 4-digit code must be entered.The
Set/Change code menu item allows you to create
or change a Personal Identification Number (PIN).
& Select
Set/Change code.
é If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to
Change code.Follow the
instructions on screen.
Source
Setup
Source
EXT1
EXT2
EXT3
EXT4
EXT5
FRONT
Centre input
Important:You have forgotten your code !
& Select
Change code in the General menu and
press
OK.
é Press the cursor right and enter the overriding
code 8-8-8-8.
“ Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
& Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g. DVD,
this source will automatically be selected when
your remote control is in DVD mode, see p. 19,
and when you press the v key on the remote
control.
Centre input
(not available in combination with a speakerless
monitor)
When you have connected a surround receiver to
the TV, the loudspeakers of the TV can act as
centre speaker, making a separate centre speaker
unnecessary.
See
Multi channel Surround receiver,p.17.
Select
Centre input On or CinemaLink (in case
you have connected a CinemaLink surround
receiver).
9
Page 10
TV menu
Press the MENU key on the remote control to summon the main menu.
Picture menu
Picture Sound Features
TV
Smart picture
Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic contrast
DNR
Colour enhancement
(Hue)
Picture format
Press the cursor right to select
Select the menu items in the Picture menu with the cursor
up/down.Adjust the settings with the cursor left/right or enter
the list of submenu items with the cursor right. Select a
submenu item with the cursor up/down.
Note:To remove the menu background before adjusting the picture
settings, see Select TV setup, General, p. 8.
Picture.
Smart picture
Select Smart picture to display a list of predefined
picture settings, each corresponding with specific
factory settings.
Personal refers to the personal preference settings
of picture in the picture menu.
Note: Disabled when a VGA source is being displayed.
Contrast
This will adjust the intensity of bright parts of the
picture but keep the dark parts unchanged.
Brightness
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
Colour
This will adjust the saturation level of the colours
to suit your personal preference.
Sharpness
This will adjust the sharpness of fine details in the
picture.
Tint
This will adjust the general colour balance of the
picture between cool and warm.
Digital options
Pixel Plus is the most ideal setting.You may consider
to select Movie Plus in case a halo effect should
disturb you. Dependant on your own preference,
select Progressive scan.
Dynamic contrast
Sets the level at which the TV automatically
enhances the details in dark, middle and light areas
of the picture.
DNR
This sets the level at which noise is measured and
reduced in the picture.
Colour enhancement
This makes the colours more vivid and improves
the resolution of details in bright colours.
Hue
This compensates for the colour variations in
NTSC encoded transmissions.
Picture format
This will adjust the size of the picture dependant on
the broadcast format and your preferred setting.
10
Page 11
Active Control
The TV continuously measures and corrects all
incoming signals in order to provide the best
picture possible.
& Press the h key on the remote control.
é The Active Control menu appears.
“ Press the cursor up/down to select the Active
Control values
Off, Minimum, Medium
(recommended) or Maximum.
The picture settings are being optimised
continuously and automatically which is
displayed by bars.The menu items can not be
selected.
Note: When having connected a monitor without a
light sensor, the values are On and Off.
‘ Press the cursor right to select
Smart Picture.
Sound menu
TV
Sound
Smart sound
Volume
Tr eble
Bass
Balance
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Digital/Analogue)
Press the cursor right to select Sound.
Select the menu items in the Sound menu with the cursor up/down and
adjust the settings with the cursor left/right.
Remember, control settings are at normal mid-range levels when the
bar scale is centered.
Note:
- In case of a Cinema Link configuration and the Cinema Link is activated,
the menu function Surround mode is steered by the audio receiver instead
of by the receiver box. See the separate Cinema Link booklet supplied.
- Dual X is only available with dual sound transmission.
-Mono/Stereo is only selectable in case of analogue stereo transmission.
-Digital/Analogue is only selectable in case of Digital transmission.
- In case you connect your TV receiver box with a speakerless monitor and
without having connected an audio receiver, all references made to sound
reproduction, volume control and audio connections are not applicable.
( Press the cursor up/down to select one of
the predefined picture settings.
§ Press the cursor right to select
è Press the cursor up/down to select
Active Display.
Show bars
one of the Dual screen demos or Off.
When you select Dynamic contrast, Pixel Plus,
Digital Noise Reduction or Digital Natural
Motion, the TV screen is divided into two parts:
in the left part the selected picture quality
setting is switched off; in the right part it is
switched on.
! Press the h key again to switch off the
Active Control menu.
Smart sound
Select
Smart sound to display a list of predefined
sound settings, each corresponding with specific
factory settings of Treble and Bass.
Personal refers to the personal preference settings
of sound in the sound menu.
Note: Disabled when a VGA source is being displayed.
Volume
This will adjust the sound output level.
Tr eb le
This will adjust the level of high frequency content in
the sound.
Bass
This will adjust the level of low frequency content in
the sound.
Balance
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
Headphone volume
This controls the level of sound through the
headphones.
Surround mode
This selects the modes for more spatial or surround
sound reproduction.
(Dual I-II)
This will select, per channel, Language I or Language II,
when dual sound transmission is available.
(Mono/Stereo)
This selects, per TV channel, mono or stereo sound
when analogue stereo broadcasts are available.
(Digital/Analogue)
This selects, per TV channel, Digital or Analogue
sound when digital sound broadcasts are available.
1111
Page 12
Features menu
TV
Programme list
Subtitle
Sleeptimer
Child lock
On timer
Zoom
Features
Off
On
On during mute
Press the cursor right to select Features.
Select the menu items with the cursor up/down and adjust
the settings with the cursor left/right.
Programme list
Press the
OK key to switch over to the selected TV
channel or external.
Select subtitles
The subtitle page must be stored for each TV
channel:
Switch on teletext and select the proper subtitle
page from the index. Switch off teletext.
Subtitle On will automatically display them on the
selected TV channels if subtitles are in the
transmission.A symbol will indicate that the mode is
on.
Select
On during mute when you want to have the
subtitles automatically displayed only when the
sound has been muted with the ¬ key on the
remote control.
Sleeptimer
With the sleeptimer you can set a time period after
which the TV automatically switches to standby.
The counter runs from 0 min. up to 180 min.
You can always switch off your TV earlier or change
the set time.
Note: When a VGA source is selected, the TV will not go
to standby when the sleeptimer expires.
Child lock
The child lock feature allows you to lock TV
channels and externals to prevent children from
watching certain programmes.
A VGA source can not be locked.
& Select
Child lock
Child lock.
Lock
Custom lock
Unlock
Lock after
Programme lock
é Press the cursor right to enter the Child lock
menu.You’re summoned to enter your code.
Note:You have to re-enter your code each time you
enter the child lock menu.
Important:You have forgotten your code !
See p. 9.
“ Select one of the menu items of the child lock
menu:
Lock if you want to lock all channels and
•
externals.
Custom lock and press the cursor right.
•
Select:
Lock after if you want to lock all programmes
from a certain time onwards.
Press the cursor right and enter the time with
the cursor up/down and right. Press the
OK key
to validate.
Programme lock if you want to lock a certain
TV channel or external;
• Select
Unlock to disable all locks you have set.
On timer
With the On timer function you can make your TV
automatically switch to a specific programme
number from standby or switch over to a different
programme number at a specific time.
Note:Your TV receiver box and your monitor should not
be powered off with the B power key.
& Select
é Select
On timer with the cursor down.
VCR1
BBC2
Off
On timer
On with the cursor right.
On
CNN
TVE
π.....
Sunday
Monday
.......
Daily
15:45
“ Press the cursor right again to enter the
programme list.
‘ Select the TV channel or external you want your
TV to switch to on a selected time and day (not
possible with a VGA source).
( Press the cursor right again to select a day of
the week or to select Daily.
§ Press the cursor right once again to enter the
time with the digit keys or with the cursor
up/down and press the
è Press the
MENU key to turn off the menu.
OK key to activate.
Note:To check your timer settings, press the i key.
Zoom
& Select
é Press the
Zoom with the cursor down and press
OK key.
the
OK key to select one of the zoom
magnifications (x1, x4, x9, x16).
“ Additionally you can shift the selected zoom
window over the screen with the cursor keys
up/down, left/right.
‘ Press the
MENU key to switch off the zoom
function.
1212
Page 13
Dual screen / PIP / Multipip
B
VCR DVD SAT AMP CD
Select
v
Ò®‡π
æ
®
®
®
OK
®
b
S
+
V
-
i
b
MENU
¬
123
456
789
0
0
Active Control
q
h
Display options
Dual screen
AUX
†
b
+
P
-
Press the b key to switch on Dual screen or one of the PIP modes
according to the format selection mode in the Dual screen format list in
the General menu. See Setup, General, p. 8.
Press the b key again. The screen that has a yellow border will become
the full main screen picture.
Notes:
- Continuing to hold the b key down will cycle the TV through the various
formats (Dual screen, Large PIP, Medium PIP, Small PIP, PIP 3, PIP 8 or PIP 12)
launching a new format after each second the key is held down. After standby
of the TV, the preference as set in the Setup, General menu is used.
- It is not possible to display a VGA or HD source in a Dual screen/PIP screen.
-When Dual screen mode is selected, two picture formats are supported: Full
screen or 4:3 letterbox picture format (vertical squeeze).
- Audio from the right screen or the PIP plays to the headphones.
PIP
AUX
PIP 3PIP 8
PIP1PIP1PIP5
PIP2PIP6
PIP2
PIP3PIP7
PIP3
PIP4PIP8
PIP 12
PIP1 PIP2 PIP3
PIP5 PIP6 PIP7
PIP9 PIP10 PIP11 PIP12
PIP4
PIP8
- Press the cursor right to highlight the right screen.
- Press the cursor down to highlight the single (large, medium or small) PIP screen.
- Press the cursor right to enter the Multipip screen and then use the cursor keys to navigate through
the PIP screens and to highlight a PIP screen.
Changing TV channels or external sources
in left, right, PIP or Multipip screen
Press the
-P+ key or the 0 key or the digit keys
in order to change the TV channels or external
sources in the highlighted screen.
Scan PIP 3, PIP 8 or PIP 12
Press the cursor down to the lowest PIP to
display a following series of PIP screens.
Define the position of the single PIP screen
&Select a Dual screen mode with a single PIP
screen.
o
œ
Position
Note: When the PIP menu is timed out, press the
OK key to make it reappear.
“Press the cursor down again to select
Position.
‘Press the OK key or the cursor right to
activate.
(Use the cursor keys to define the position of
the PIP screen.
§
Press the OK key. The PIP menu reappears.
èPress the cursor up twice to highlight the main
screen again and press the OK key to switch
off the menu.
On-Screen information
The highlighted On-Screen information,which
appears when changing channels, always refers to
the active screen.
éPress the cursor down to highlight the PIP
screen. A PIP menu appears with which you
can define the position of the PIP screen.
1313
Page 14
Teletext
(only English teletext supported)
Most TV channels broadcast information via teletext.This TV has a 1200 pages memory that will store
most broadcasted pages and subpages to reduce waiting time. After each programme change, the memory
is refreshed.
Switch Teletext on and off
•Press b to switch the teletext on.
102«03 04 05 06 07 08 09 10 11 12»
BBC CEEFAX102 Mon 05 Feb 16.35.22
BBC CEEFAX
LIONS RECORD ANOTHER WIN430
Index100News300
BBC Info110Headlines305
Children120Weather400
Cookery150Sports415
Education200Radio500
Lottery230Travel550
Finance240Subtitling888
Music280TV Listings600
RedGreenYellowBlue
Select a Teletext page
- Enter the desired page number with the digit
keys, the cursor keys up/down, left/right or
with the
-P+ keys, or
- Select the options at the bottom of the screen
with the colour keys. (Only available when
broadcasted by the channel.).
Quickly run through the teletext
pages
Press the -P+ key to run through the previous or
the following pages.
Select the previously selected
teletext page
(Only possible in case there is no list of favourite
teletext pages available. See p.17.)
Press the 0 key.
Select the index teletext page
Press the grey colour key † to display the main
index (usually p.100).
Select subpages
When a selected teletext page consists of different
subpages, one of the subpages appears on the
screen.
Press the cursor right to highlight the subpage
number.
Press the cursor up/down to select the next or
previous subpage or enter the subpage number
with the digit keys.
Enlarge
Press q repeatedly to display the upper teletext
part, the lower teletext part and then to return to
the normal teletext page size.When the teletext
page is enlarged, you can scroll the text, line by line
using the cursor up/down.
Active screen selection
When in dual screen picture/teletext, enter the
desired page number with the the
press the
MENU key, then select the left screen
-P+ key, then
(with the blue ball at the top).
You can now select a compressed or full screen
view of picture/teletext with the q key.
Hypertext
With hypertext you can quickly jump to a
pagenumber or search for a specific word shown
on the current teletext page.
& Press the
a number on the page.
Note: When in dual screen mode, press the cursor
down to highlight the first word or page number.
é Use the cursor up/down, left/right to select any
other word or number you want to search for.
“ Press the
A message appears at the bottom of the screen
to indicate the searching, or that the word or
page is not found.
‘ Use the cursor up to exit hypertext.
OK key to highlight the first word or
OK key to confirm. The search starts.
141414
Page 15
Teletext menu
(only available in full screen teletext mode)
& Press the
é Press the cursor up/down to select the menu
items.
“ Press the cursor right to activate.
Reveal
Reveals/conceals hidden information on a page,
such as solutions to riddles and puzzles.
Press the cursor right to activate.
Favourite
This list contains up to eight favourite teletext
pages. Only the pages of the current channel can
be selected.
& Press the cursor right to enter the list.
é Press the cursor right again to add the current
page or to select one of the favourite pages to
the list.
“ Press the
‘ Use the 0 key to browse through the list of
favourite pages.
Search
Selecting a word
On the keyboard on screen you can type in a
random word you want to search for in the
teletext pages.Whether upper- or lowercase is
used has no influence.
puck
RedGreenYellowBlue
MENU key to activate the menu.
MENU key to watch the page.
10203 04 05 06 07 08 09 10 11 12
WORD
BBC1
NAME
FOOTBALL
CancelAccept
SpaceDelete
ABCDEFG 1 2 3
HIJKLMN 4 5 6
OP QRSTU 7 8 9
V W X Y Z 0
ShiftSpecial
TELETEXT
Searching a word
& Type in the word on screen or select a word
from the history list on the right and press
é Select
Accept and press OK again.
The message
Searching appears.
OK.
“ To cancel the searching or to search for a new
word, select
Keyboard and press OK.
‘ When a word is not found, a message appears.
When the word is found, it is highlighted in the
teletext page.To continue the search, press the
OK key.
Cycle subpages (if available)
Makes the subpages cycle automatically.
Press the cursor right to activate and to de-activate
again.
Timed page
To display a specific page from a selected TV channel
at a certain time.
& Press the cursor right and select
Ye s or No.
é Enter the time and pagenumber with the cursor
keys or the digit keys.
Note:
- Teletext does not have to remain switched on, but
you should watch the TV channel you have selected
the specific page from.
- It is not possible to display a timed page when in
VGA mode.
“ Press the cursor left to return to the TV menu
again.
Language
If the displayed characters on screen do not
correspond with the characters used by the teletext
broadcaster, you can change the language group
here.
Select
Group 1 or Group 2 with the cursor right.
Press the
MENU key to leave the Teletext menu.
& Press the cursor right to enter the keyboard.
é Press the cursor left/right, up/down to select
the characters, words or functions.
“ Press the
OK key to confirm each character
selected.
‘Select
Cancel to cancel the word; Space to
enter a space;
character selected;
Delete to delete the last
Shift to switch between
lowercase or capital characters;
Special to
display special characters on the keyboard and
press the
OK key.
( Press the cursor left repeatedly to return to
the Teletext menu again.
151515
Page 16
VCR 1DECODER
CABLE
1
4
EXTERNAL
2
2
3
EXTERNAL
21
VCR 1
CABLE
≈
1
5
2
4
3
21
DVD
OUT
EXTERNAL 5
L
RV
U
Y
Connect Peripheral Equipment
Tw o special adaptors (scart to cinch) are provided with your TV.
Connect the adaptor marked
Connect the adaptor (with the
Note: -
EXTERNAL 2 only has S-VIDEO input (no output).
- In case of a (unstable) black bar at the right side of the picture, use the cursor left/right to shift horizontally.
- The low quality of some digital picture material may be the cause of digital image distortion.According to
the connected digital equipment, select
the digital transmission is still poor, select the
setting manually.)
(VCR-
Recorder
DVD +RW)
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals out of the
display. Keep a minimum distance of 0,5 m to the screen.
RECORDER
EXTERNAL 1 to the scart EXTERNAL 3 or 4.
IN/OUT switch) marked EXTERNAL 2 to the scart EXTERNAL 1, 2 or 5.
DVD, Game, SAT or Digital STB in the Setup/Source menu. (In case
SOFT Smart Picture setting without changing the picture
Connect the aerial cables 1, 2 and, to obtain the optimum
picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only possible
connection is via the aerial cable.You will therefore need to tune
in your recorder’s test signal and assign it programme number 0
or store the test signal under a programme number between 90
and 99, see Manual installation, p. 6.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special
euroconnector of your recorder. See also the recorder handbook.
You can also connect your decoder directly to
EXT1 or 2 with a
eurocable.
Other equipment (satellite receiver, decoder, DVD, games, etc.) with euroconnector
& Connect the aerial cables 1, 2 and 3 as shown (only if your
peripheral has TV aerial in-/output).
DVD player
161616
RECORDER
Connect your equipment with a eurocable 4 or 5 to one of
the euroconnectors
quality.
é Look for the test signal of your peripheral in the same way as you
do for a recorder.
“ Make a selection in the Setup, Source menu, p. 9.
With Component Video Output Connectors
(EXTERNAL 5)
&Connect the three separate component video cables to the DVD
player’s Y, U (Pb) and V (Pr) jacks and to the Y, Pb and Pr jacks
on the receiver.
éConnect the audio cable to the DVD player’s audio L and R jacks
and to the L and R audio EXTERNAL 5 jacks on the receiver.
EXT1, 2, 3 or 4 to obtain a better picture
Page 17
AUDIO OUT
L
R
1
2
CENTRE
Side connections
S
•VHS
VIDEO IN
AUDIO
L
R
12
3
Camera or Camcorder
& Connect your camera or camcorder as shown.
é Connect to
stereo equipment also connect
S-VHS quality with an S-VHS camcorder is obtained by connecting
the S-VHS cables with the S-video input 3 and audio inputs 1.
Do not connect cable 2 and 3 at the same time.This may cause
picture distortion !
Headphone
& Insert the plug into the headphone socket L as shown.
é Press ¬ on the remote control to switch off the internal
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm.The
headphone socket has a 3.5 mm jack.
In the Sound menu select
headphone volume.
Multi channel Surround receiver
& Connect the audio cable to the multi channel Surround receiver and
to
AUDIO OUT L and R at the back of your TV receiver box 1.
é If you want the loudspeakers of your monitor to act as centre
speaker, also connect an audiocable to the multi channel Surround
receiver and to the
of your TV receiver box 2.
“ Select
The loudspeakers of the monitor will now only produce centre
sound, the loudspeakers connected to the audio receiver will
produce Surround Sound.The volume has to be controlled via the
multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is
blocked via the Child lock menu (see p. 12).
VIDEO 2 and AUDIO L 1 for mono equipment. For
AUDIO R 1.
Headphone volume to adjust the
SURROUND SOUND CENTRE IN at the back
Centre Input On in the Source menu. See p. 9.
Cinema Link surround receiver
See the separate supplied Cinema Link instruction manual.
Note: CinemaLink via the scart to cinch adaptor is NOT possible.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Connect your computer
See the separate supplied instruction manual with your monitor.
To select connected equipment
Press the v key on the remote control repeatedly to select EXT1, EXT2, EXT3, EXT4, EXT5, FRONT
or VGA according to where you connected your equipment at the back or the front side of your receiver.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
17
17
Page 18
VGA menu
Only available when a VGA source has been connected and activated. See also the separate supplied
instruction manual with your monitor.
In case you connect your VGA source with a speakerless monitor and without having connected an
audio receiver, all references made to sound reproduction are not applicable.
& Select VGA with the w key and press the OK key to confirm.
é Press the MENU key to switch on the VGA menu.
VGA
“ Select one of the menus with the cursor left/right.
Note: Only when you have chosen the US English language, the menu items will be displayed with
additional icons.
‘ Select one of the menu items with the cursor up/down.
See the separate booklet supplied with the monitor.
1
Pict. a
Brightness
Contrast
Colour temp.
Sharpness
( Press the cursor left/right to alter the selected adjustment.
§ Press the MENU key again to switch off the VGA menu.
Picture 1 Picture 2Sound Setup
Pict. a
2
(Format)
(Zoom)
Zoom factor
(Shift)
(Clock frequency)
(Phase)
(Auto align)
Sound
(Volume)
(Bass)
(Treble)
(Sound mode)
Setup º
Language
(Power savings)
(AV3)
(VGA2)
Recorder or DVD with EasyLink
(not possible via the scart to cinch adaptor)
The recorder (VCR or DVD+RW) or DVD can be operated with the remote control via the Recorder or
DVD menu on screen.
Recorder
Òp‡π † ® Ï
Rwd Play Stop PlayFfw Rec Eject
DVD
Òp ‡ π † Ï
Prev. Play Stop PlayNext Eject
& Press the MENU key on the remote control.
é Select the Recorder or DVD menu with the cursor up/down.
“ Press the cursor left/right, up/down to select one of the recorder or DVD functions.
The key ® for recording can be operated in the TV mode.
If your EasyLink recorder has the system standby function, when you press the B key for 3 seconds, both TV
and the recorder are switched to standby.
181818
Page 19
Audio- and video equipment keys
B
b
¬
+
-
V
+
-
P
v
b
i
0
h
q
Select
VCR DVD SAT AMP CD
MENU
OK
123
456
789
0
Ò®‡π
†
Active Control
S
®
®
®
®
æ
Most of the audio and video equipment from the Philips range of products
can be operated with the remote control of your TV.
Press the
display. Another device can be selected by pressing Select repeatedly within
2 seconds.The led will blink slowly to indicate the device.
Press one of the keys on the remote control to operate the peripheral
equipment.
To r eturn to TV mode press
When no action is taken within 60 seconds, the remote goes back to TV
mode.
Note: When the
RC5/RC6 system select command is transmitted.
Select key to operate any of the equipment indicated in the
Select key is pressed and hold for more than 2 seconds, the
Select while the led is blinking.
Bto switch to standby
Sfor pause (
®for record
Òfor rewind (
search down (
‡for stop
πfor play
†for fast forward (
search up (
æto select your choice of
subtitle language (
RDS news/TA (
to shuffle play (
bto select a
RDS display (
info on screen (
idisplay information
Selecting submodes for DVD+RW, SAT, CDR
& The remote control should be in TV mode.
é Press the
OK key together with
VCR, DVD, CD)
VCR, CD);
DVD , AMP)
VCR, CD);
DVD/AMP)
DVD );
AMP);
CD)
DVD title;
AMP);
CD)
• digit 1:
• digit 2:
selected
• digit 3:
• digit 4:
• digit 5:
• digit 6:
MENU to switch the menu on or
off
- P +for chapter, channel, track
selection
0 to 9 digit entry
0tape index (
select a DVD chapter,
select a frequency (
UVCR timer
Qsurround on/off (
cursor up/down
to select the next or the
previous disc (
cursor left/right
to select the previous or
following track (
search up/down (
DVD mode is selected
DVD+RW mode is
SAT (RC5) mode is selected
SAT (RC6) mode is selected
CD mode is selected
CD-R mode is selected.
VCR),
AMP)
AMP, CD)
CD)
CD)
AMP)
Record with your recorder with
In TV mode, it is possible to start a direct recording of the programme
which is being displayed on the TV screen.
Continue to press the ® record key on the remote control for more than
2 seconds.
Note:
Switching programme numbers on your TV does not disturb recording !
When recording a programme from a peripheral connected to
FRONT, you can not select another TV programme on the screen.
Attention:
Recording from EXTERNAL 5 will only have black and white pictures.
EasyLink
EXT1, 3, 4, 5 or
191919
Page 20
Tips
Tips
Care of the screenClean the TV with a slightly damp soft cloth. Do not use abrasive solvent as it can
damage the TV screen.
Poor Picture•Have you selected the correct TV system in the manual installation menu?
• Is your monitor or house aerial located too close to loudspeakers, non-earthed
audio equipment or neon lights, etc.?
• Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of the
aerial.
• Is the picture or teletext unrecognisable? Check if you have entered the correct
frequency. See Installation, p. 6.
•Are brightness, sharpness and contrast out of adjustment? Select Factory
settings in the Setup, General menu, p. 8.
No Picture•Are the supplied cables connected properly ? (The aerial cable to the receiver
box, the other aerial to your recorder, the VGA cables to the display, the power
cables.)
• Has the child lock been switched off ?
• Is your PC switched on ?
• Do you see a black screen and the indicator in front of the monitor lights up
green, this means that the display mode is not supported. Switch your
VGA-source to a correct mode.
• In case of weak or bad signal, consult your dealer.
Digital distortionThe low quality of some digital picture material may be the cause of digital image
distortion. In this case select the Soft setting using the Picture menu, Smart Picture,
without changing the picture settings manually.
No sound• No sound on any channel? Check the volume isn’t at minimum.
• Is the sound interrupted with the mute key ¬?
No Surround• Check if the headphone is not plugged in.
sound•Perhaps the channel is not broadcasting good quality surround sound.
• No sound from the rear speakers or the centre speakers? Select an appropriate
surround mode, according to the broadcasted sound signal or adjust the
volume. See Surround Modes, p. 11.
No solution foundSwitch your TV off and then on again once. Never attempt to repair a defective
for your picture orTV yourself. Check with your dealer or call a TV technician.
sound problem ?
MenuHave you selected the wrong menu? Press the MENU key again to exit from the
menu.
Remote control• Check if the remote control is in the correct mode.
• If your TV no longer responds to the remote control, the batteries may be dead.
•You can still use the MENU key and the -/+ keys at the top of your TV.
StandbyYour TV consumes energy in the standby mode. Energy consumption contributes
to air and water pollution.
No stable or not Check if you have selected the correct VGA mode in your PC. See the separate
synchronised VGAinstruction manual with the monitor.
picture
TV receiver boxIn case you connect your TV receiver box with a speakerless monitor, and
with speakerless without having connected an audio receiver, all references made in this
monitor instruction book to sound reproduction, volume control, and audio connections,
are not applicable (except for a headphone connection).
The keys on the remote control referring to sound have no function either.
Miscellaneous. Ambient temperature: + 5~ + 40°C
. Mains: 50/60 Hz Auto Voltage ranging from 95 V to 264 V
.Power consumption: around 35 W
. Standby consumption: 2 W
.Weight (excl. packaging): 4 kg
. Dimensions (wxhxd): Receiver: 43.5 x 10.5 x 33 cm
20
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.