Philips CMQ405 - annexe 1 User Manual

Register your product and get support at

www.philips.com/welcome

CMQ405

EN User manual 3

ES Manual del usuario 13

PT-BR Manual do Usuário 25

RU Руководство пользователя 37

ZH-CN Ⴌ߀൱Ҭ 49

3

English

EN

Contents

1 Important 4

Safety 4
Notice 4

2 Your car power amplifier 5

Introduction 5
What’s in the box 5
Overview of the main unit 5

3 Installation 6

Mount the amplifier in car 6
Connect speakers 7
Connect car audio 7
Connect power 7

4 Use your power amplifier 9

Select HPF/LPF mode 9
Adjust input level 9
Adjust bass boost 9
About the protector indicator 9
Replace fuse 10

5 Product information 10

6 Troubleshooting 11

4

Notice

Environmental information

All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.

Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.

2010 © Koninklijke Philips Electronics N.V.
All rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.

1 Important

Safety

Read and understand all instructions •
before you use the apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.

This unit is designed for negative ground •
(earth) 12 V DC operation only.

Use only the supplied mounting hardware •
for a safe and secure installation.

Do not connect any active speakers (with •
built-in amplifier) to the speaker terminals
of the unit. Doing so may damage the
active speakers.

To ensure safe driving, adjust the volume •
to a safe and comfor table level.

To avoid short circuit, do not expose the •
apparatus, remote control or remote
control batteries to rain or water.

Never expose the apparatus to direct •
sunlight, naked flames or heat.

Clean the apparatus with soft, damp •
cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the apparatus.

EN

5

Overview of the main unit

a FRONT INPUT L/R

Connect car audio with RCA cable.•

b FRONT INPUT LEVEL

Adjust input level (0.3V to 6V).•

c FRONT CHANNEL

When switch to 2CH, front channel •
input.

When switch to 4CH, each input •
from front and rear channel.

d FRONT HPF

Adjust frequency of HPF to 80Hz or •
OFF (FLAT) mode.

e REAR BASS BOOST

Boost frequency for around 50Hz, •
12dB.

f REAR LPF

Adjust frequency of LPF to 180Hz or •
OFF(FLAT) mode.

g REAR INPUT LEVEL

Adjust input level (0.3V to 6V).•

h REAR INPUT L/R

Connect car audio with RCA cable.•

2 Your car power

amplifier

Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.

Introduction

With the amplifier, you can enjoy high quality
sound performance with powerful bass and
beats.

What’s in the box

Check and identify the contents of your package:

a Amplifier
b Screw (25mm) x 4
c Fuse x 2

English

EN