Register your product and get support at
www.philips.com/welcome
CMQ205
EN User manual 3
ES Manual del usuario 13
PT-BR Manual do Usuário 25
RU Руководство пользователя 37
ZH-CN Ⴌ߀൱Ҭ 49
Contents
1 Important 4
Safety 4
Notice 4
2 Your car power amplifier 5
Introduction 5
What’s in the box 5
Overview of the main unit 5
3 Installation 6
Mount the amplifier in car 6
Connect speakers 7
Connect car audio 7
Connect power 7
4 Use your power amplifier 9
Select filter mode 9
Select LPF frequency 9
Adjust input level 9
Adjust bass boost 9
About the protector indicator 9
Replace fuse 10
5 Product information 10
English
6 Troubleshooting 11
EN
3
1 Important
Safety
Read and understand all instructions •
before you use the apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
This unit is designed for negative ground •
(earth) 12 V DC operation only.
Use only the supplied mounting hardware •
for a safe and secure installation.
Do not connect any active speakers (with •
built-in amplifier) to the speaker terminals
of the unit. Doing so may damage the
active speakers.
To ensure safe driving, adjust the volume •
to a safe and comfortable level.
To avoid short circuit, do not expose the •
apparatus, remote control or remote
control batteries to rain or water.
Never expose the apparatus to direct •
sunlight, naked flames or heat.
Clean the apparatus with soft, damp •
cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the apparatus.
Notice
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
4
EN
2 Your car power
Overview of the main unit
amplifier
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With the amplifier, you can enjoy high quality
sound performance with powerful bass and
beats.
What’s in the box
Check and identify the contents of your
package:
a INPUT L/R
Connect car audio with RCA cable.•
b OUTPUT L/R
To connect additional amplifier with •
RCA cable for additional speakers.
c INPUT LEVEL
Adjust input level (0.3V to 6V).•
d FILTER MODE
Set frequency filter at LPF (low-pass-•
filter), HPF (high-pass-filter), or OFF
(flat) mode.
English
(
)
30A
a Amplifier
b Screw (25mm) x 4
c Fuse x 1
e LPF FREQUENCY
Set LPF (low-pass-filter) frequency •
from 80Hz to 120Hz.
f BASS BOOST
Boost frequency for around 50Hz, •
12dB .
g POWER/PROTECTED
Light in green when the amplifier is •
switched on.
Light in red when the amplifier is •
abnormal and protected.
h SPEAKER OUTPUT
Connect to speakers or subwoofers.•
EN
5