Introduction6
What’s in the box 6
Overview of the main unit 7
Overview of the remote control 8
3 Get started 10
Install the car audio 10
Install remote control battery 16
Turn on 16
Select display language 16
Set clock 17
4 Play 17
Load discs 17
Insert USB device 18
Insert SD/MMC card 19
Skip/search19
Intro play 19
Repeat play 19
Random play 20
Select subtitle language 20
Select audio language 20
Select audio mode 20
Select video output format 20
Zoom21
6 Adjust settings 24
English
Adjust sound 24
Adjust system settings 26
Adjust general DVD settings 26
Adjust video DVD settings 27
Select language 28
Adjust display settings 28
View DivX registration code 28
7 Others 29
Listen to other devices 29
Detach the front panel 29
Reset29
Remove the unit 30
Replace fuse 30
Turn on/off the screen backlight 30
8 Product information 31
9 Troubleshooting 32
10 Glossary 33
5 Listen to radio 21
Tune to a radio station 21
Store radio stations in memory 21
Tune to a preset station 22
Select stereo/mono broadcasting 22
Select tuner sensitivity 22
Play with RDS 23
EN
3
1 Important
Safety
Read and understand all instructions •
before you use the apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
Use of controls or adjustments or •
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation.
This unit is designed for negative ground •
(earth) 12 V DC operation only.
To reduce the risk of traffi c accident, do •
no watch video during driving.
To ensure safe driving, adjust the volume •
to a safe and comfortable level.
Improper fuses can cause damage or •
fi re. When you need to change the fuse,
consult a professional.
Use only the supplied mounting hardware •
for a safe and secure installation.
To avoid short circuit, do not expose the •
apparatus, remote control or remote
control batteries to rain or water.
Never insert objects into the ventilation •
slots or other openings on the apparatus.
Never place any objects other than discs •
into the disc tray/slot.
Visible and invisible laser radiation when •
open. Avoid exposure to beam.
Risk of damage to the screen! Never •
touch, push, rub or strike the screen with
any object.
Never use solvents such as benzene, •
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Clean the apparatus with soft, damp •
cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the apparatus.
Notice
The making of unauthorized copies of
copy-protected material, including computer
programs, fi les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
“DivX, DivX” Certifi ed, and associated logos
are trademarks of DivX, Inc. and are used
under license.
Offi cal DivX® Certifi ed product. Plays all
versions of DivX® video (including DivX® 6)
with standard playback of DivX® media fi les.
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Other trademarks and trade names are those
of their respective owners.
Congratulations on your purchase, and
welcome to Philips! To fully benefi t from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With the in-car audio system, you and your
passengers can enjoy:
DVD, VCD or DivX video•
Music CDs•
FM or AM (MW) radio•
MP3/WMA audio from discs, USB devices •
and SD/MMC cards
Audio from external devices•
Check and identify the contents of your
package:
a Front panel carry case (includes front
panel)
b Car audio system
c Trim plate
d Remote control
e Rubber cushion
f Standard connector
g Removal keys x 2 pcs
h Screws M5x6 mm x 5 pcs
i User manual
j Installation guide
k MP3-link cable
6
EN
Overview of the main unit
a
t
s
b
c
d
e
r
q
p
o
f
n
m
l
k
g
English
jhi
a MENU
Access the system menu.•
b
/
Tune for radio station.•
Skip/search for track.•
u
x
c OK /MUTE
Turn the unit on or off.•
Turn mute on or off.•
Adjust volume.•
Confi rm selection.•
d
/
Select tuner band. •
Select folder.•
v
w
EN
7
e
Return to previous menu.•
Stop searching.•
Disable screen saver.•
f Screen
g
Unlock the front panel.•
h USB socket
i External equipment audio-in socket
j R/L ,6
Select preset station no. 6.•
Select audio channel.•
k 5, P/N
Select preset station no. 5•
Select video output format.•
l SHUF, 4
Turn random play on or off.•
Select preset station no. 4•
t SOURCE
Select audio source.•
u Disc slot
v
Eject disc.•
w SD/MMC card slot
x RESET
Restore default settings.•
Overview of the remote
control
m 3, REP
Select repeat play mode.•
Select preset station no. 3•
n INTRO, 2
Turn scan play on or off.•
Select preset station no. 2•
o 1,
Star t play.•
Pause or resume play.•
Select preset station no. 1•
p TA/A F
Enable TA/AF function.•
q SEARCH
Select tuner band.•
Store radio station automatically.•
Select repeat play mode.•
Select preset station no. 3•
h SCH
Store radio station automatically.•
i DISP
Display play information. •
j ZOOM
Enlarge or reduce picture or active •
image size.
k ANGLE
Select a difference angle/version of •
the current DVD scene.
q SHUF, 4
Turn random play on or off.•
Select preset station no. 4.•
r 1
Select preset station no. 1•
s INTRO, 2
Turn intro play on or off.•
Select preset station no. 2•
t AUDIO
Access audio setting menu.•
u Navigation buttons
•
/
Tune for radio station.
Skip/search for track.
•
/
Select tuner band.
Select folder.
•SEL/
Confi rm selection.
Star t play.
Pause or resume play.
v MENU
Access system menu.•
w
PWR
Turn the unit on or off.•
x
Mute or unmute audio.•
English
l R/L
Select audio channel.•
m P/N
Select video output format.•
n SUBTITLE
Select DVD or DivX subtitle •
language.
o DISC MENU
Return to DVD main menu.•
p 5/6/7/8/9/0+
Select track or preset radio station.•
EN
9
3 Get started
Caution
Use the controls only as stated in this user •
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Note on the power supply lead (yellow)
When you connect other devices to this •
apparatus, ensure that the rating of the
car circuit is higher than the total fuse
value of all the connected devices.
Notes on speaker connection
Never connect speaker wires to the •
metal body or chassis of the car.
Never connect speaker wires with stripes •
to one another.
Overview of parts
These are the supplied parts needed to
connect and install this unit.
a
b
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
This unit is designed for negative ground •
(earth) 12 V DC operation only.
•
Always install this unit in the car dashboard.
Other locations can be dangerous as the rear
of the unit heats up during use.
To avoid shor t-circuit: before you connect,
•
ensure that the ignition is off.
Ensure that you connect the yellow and red
•
power supply leads after all other leads are
connected.
•
Ensure that all loose leads are insulated with
electrical tape.
•
Ensure that the leads do not get caught under
screws orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to
•
a common ground (earth) point.
Use only the supplied mounting hardware for a
•
safe and secure installation.
Improper fuses can cause damage or fi re.
•
When you need to change the fuse, consult a
professional.
c
f
de
a Carry case with front panel stored
inside
b Trim plate
c Standard connector
d Rubber cushion
e Removal keys x 2 pcs
f Screw x 5 pcs
10
EN
Connect wires: ISO connectors
Caution
Ensure that all loose leads are insulated with •
electrical tape.
1 Pull out the ISO connectors from the
car dashboard and connect them to
the bigger end of the supplied standard
connector.
3 Do the other connections, if applicable.
English
CAMERA IN
Connect wires: without ISO
connectors
Caution
2 Connect the other end of supplied
standard connector to the unit.
Ensure that all loose leads are insulated with •
electrical tape.
1 Cut off the bigger end of the supplied
standard connector.
EN
11
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.