Always there to help you
Question?
Contact
Philips
Register your product and get support at
www.philips.com/support
CE235BT
User manual
1
Contents
1 Safety 2
2 Your car audio system 3
Introduction 3
What's in the box 3
Overview of the system 4
3 Install the car audio system 6
Connect wires 7
Mount into the dashboard 8
Attach the front panel 9
4 Get started 10
For the rst time use 10
Set the time format 10
Set the clock 10
Select a source 10
Select a listening zone 10
Mute the button beep 11
5 Listen to radio 11
Switch to radio mode 11
Select a tuner region 11
Select a tuner sensitivity 11
Search for a radio station 12
Store radio stations in memory 12
Play with RDS 12
9 Charge your USB device 18
10 Adjust sound 19
11 Adjust system settings 19
12 Additional information 20
Reset the system 20
Replace the fuse 20
13 Product information 21
Product Information 21
14 Troubleshooting 22
General 22
About the Bluetooth device 22
15 Notice 23
Compliance 23
Care of the environment 23
Trademark notice 23
Copyright 23
6 Play from a storage device 14
Control play 15
Switch tracks 15
7 Use Bluetooth devices 16
Connect a device 16
Play audio from a Bluetooth device 17
Make a call 17
8 Listen to an external player 18
1EN
1 Safety
Read and understand all instructions before you
use this device. If damage is caused by failure to
follow instructions, the warranty does not apply.
• Modication of the product could result
in hazardous radiation of EMC or other
unsafe operation.
• The device is designed for negative ground
(earth) 12 V DC operation only.
• To ensure safe driving, adjust the volume to
a safe and comfortable level.
• Improper fuses can cause damage or
re. When you need to change the fuse,
consult a professional.
• Use only the supplied mounting hardware
for a safe and secure installation.
• To avoid short circuits, do not expose the
device to rain or water.
• The device shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on
the device (e.g. liquid lled objects, lighted
candles).
• Never insert objects into the ventilation
slots or other openings on the device.
• Clean the device with soft, damp cloth.
Never use substances such as alcohol,
chemicals or household cleaners on the
device.
2 EN
2 Your car audio
What's in the box
system
Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this system, you can:
• enjoy audio from USB storage devices,
micro SD card, and other external players,
and Bluetooth device.
• listen to radio stations.
You can enrich sound output with these sound
effects:
• Dynamic bass boost (DBB)
• Digital sound control (DSC)
Playable media:
• USB storage device
• Compatibility: USB 2.0, USB 1.1
• Class support: MSC (Mass Storage
Class)
• Maximum capacity: 32 GB
• micro SD card
• Maximum capacity: 32 GB
• .mp3 les
• File system: FAT16, FAT32
• Maximum number of folders: 99
• Maximum number of tracks/les: 999
• Maximum level of directory: 8
• Sampling frequencies: 32 kHz, 44.1 kHz,
48 kHz
• Bitrates: 8-320 kbps and variable
bitrates
• ID3 tag V2.0 or later
• Unsupported les:
AAC, WAV, and PCM les
Check and identify the contents of the package:
ab c
d
e
a Main unit (with a sleeve)
b Carrying case (with front panel included)
c Trim plate
d Disassembly tool X 2
e User manual
3EN
Overview of the system
ab cde
v
ts rqpo nm lkji hfgu
xw
a
• Unlock the front panel.
b
• Press to return to the previous menu.
• Press and hold to access the system
menu.
c
• For .mp3 tracks, press to select the
previous folder.
• In radio mode, press to select a tuner
band.
• Press and hold to activate the selection
of listening zones.
4 EN
d LCD screen
e AUDIO IN
• Connect to the audio output socket
(usually the headphone socket) of an
external device.
f
• Connect to a USB storage device.
g
• Press to enable or disable the MAX
Sound feature.
h DBB
• Press to enable or disable the DBB
(dynamic bass boost) sound effect.
i
• Press to start, pause, or resume the
play of tracks.
• In radio mode, press to select the
preset radio station of No. 6.
• In radio mode, press and hold to store
the current radio station at channel
No. 6.
j
• In radio mode, press to select the
preset radio station of No. 5.
• In radio mode, press and hold to store
the current radio station at channel
No. 5.
k
• In radio mode, press to select the
preset radio station of No. 4.
• In radio mode, press and hold to store
the current radio station at channel
No. 4.
• For .mp3 tracks, press repeatedly
to select a play mode: play all tracks
randomly ([SHU ALL]), play tracks in
the current folder randomly ([SHU
FLD]), or play all tracks in the storage
device in sequence ([SHU OFF]).
l
• In radio mode, press to select the
preset radio station of No. 3.
• In radio mode, press and hold to store
the current radio station at channel
No. 3.
• For .mp3 tracks, press repeatedly
to select a repeat mode: repeat the
current track ([REP ONE]), repeat
all tracks in the current folder ([RPT
FLD]), or repeat all tracks in the
storage device ([RPT ALL]).
m
• In radio mode, press to select the
preset radio station of No. 2.
• In radio mode, press and hold to store
the current radio station at channel
No. 2.
• For .mp3 tracks, press to access the
folder list.
n
• In radio mode, press to select the
preset radio station of No. 1.
• In radio mode, press and hold to store
the current radio station at channel
No. 1.
• For .mp3 tracks, press to access the
track list.
o
/DSP
• Press repeatedly to display available
information about the current track.
• Press repeatedly to display available
RDS information.
• Press and hold to display the set clock.
p AS/SOURCE
• Press repeatedly to select a source.
• In radio mode, press and hold to
activate the automatic search of radio
stations.
q
• For .mp3 tracks, press to select the
next folder.
• In radio mode, press to select a tuner
band.
r
• Press to turn on the system.
• Press and hold to turn off the system.
• Press to mute the speakers or release
them from mute status.
• Press to conrm an option.
• Rotate to switch between menu
options.
• Rotate to adjust the volume level.
s
• Press repeatedly to select a preset
sound equalizer.
• Press and hold to activate the setup of
bass, treble, balance, and fader.
5EN
t /
• Tune to a radio station.
• Press to skip to the previous/next
track.
• Press and hold to rewind a track or
search fast forward.
u
• Press to hang up an ongoing call.
• Press and hold to reject an incoming
call.
v
• Press to answer an incoming call.
• When it is not in a call, press
the last called number, and then press
to start calling.
• In a call, press and hold to transfer the
voice between the phone and the car
speakers.
w
• Insert a micro SD card.
x RESET
• Press to reset the system to factory
default settings.
to redial
3 Install the car
audio system
Caution
Use the controls only as stated in this user manual.
•
Always follow the instructions in this chapter in
sequence.
These instructions are for a typical installation.
However, if your car has different requirements,
make the adjustment accordingly. If you have
any question regarding installation kits, consult
your local retailer.
Note
This system is designed for negative ground (earth) 12V
•
DC operation only.
• Always install this system in the car dashboard. Other
locations can be dangerous as the rear of the system
heats up during use.
• To avoid shor t-circuit: before you connect, make sure
that the ignition is off.
• Make sure that you connect the yellow and red power
supply leads after all other leads are connected.
• Make sure that all loose leads are insulated with
electrical tape.
• Make sure that the leads do not get caught under
screws iron parts that will move (e.g. seat rail).
• Make sure that all ground (ear th) leads are run to a
common ground (earth) point.
• Use only the supplied mounting hardware for a safe
and secure installation.
• Improper fuses can cause damage or re. When you
need to change the fuse, consult a professional.
• When you connect other devices to this system, make
sure that the rating of the car circuit is higher than the
total fuse value of all the connected devices.
• Never connect speaker wires to the metal body or
chassis of the car.
• Never connect speaker wires with stripes to one
another.
6 EN
Loading...