Pfister GT34-4PS0 User Manual [en, es, fr]

34 Series

Serie 34
Série 34

Single Control Kitchen Faucet

Grifo monomando para la cocina

Mitigeur de Cuisine

Lifetime Limited Mechanical & Pfinish Warranty

Price Pfister

Covers Pfinish and Pfunction for as Long as You

Own Your Home

(Commercial Applications Limit the Duration of the

Warranties as Provided Below)

Price Pfister provides the following Warranties for its products. Proof
of Purchase may be required in order to obtain any of the benefits set
forth below.

Limited Warranties: Price Pfister warrants that for as long as the original
purchaser owns the home in which the Price Pfister product (the “Product”)
is originally installed, the Product will be free of all defects in material
and workmanship that would impair the intended and proper use of the
Product. If the Product is installed in a commercial application, the above
mechanical warranty shall be limited for a period of ten (10) years from the
date of purchase of the Product.

Price Pfister warrants against deterioration of the Product’s finish for as long
as the original purchaser owns the home in which the Product is originally
installed. If the Product is installed in a commercial application, the above
finish warranty for Products that do not contain the Pforever finish shall be
limited to a period of five (5) years from the date of purchase.

Exclusive Remedy: In the event of any defect in the Product that breaches
the foregoing warranties, Price Pfister, at its option, will repair or replace
the defective part of the Product. Repair or replacement of the Product is
the exclusive remedy.

For any remedy under this warranty, Price Pfister is to be notified describing
the problem. In order to notify Price Pfister and receive assistance or service
under this warranty, the original purchaser may: (1) call 1-800-Pfaucet
(1-800-732-8238) for a consumer service representative who can assist
you, or (2) write consumer service department c/o Price Pfister Inc., 19701
DaVinci, Lake Forest, CA 92610, and include a description of the problem,
model number, your name, address, phone number and approximate date
of purchase, or (3) email Price Pfister’s customer service department by
going to www.PricePfister.com, or (4) notify the location or distributor
from which the Product was purchased. In any case, you may be required
to return the Product to Price Pfister for inspection and proof of purchase
may be required.

Limitations and Exclusions:
PRICE PFISTER WILL NOT BE LIABLE FOR ANY OTHER DAMAGES
OR LOSSES, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL
AND/OR CONSEQUENTIAL DAMAGES, REGARDLESS OF THE
LEGAL THEORY ASSERTED, INCLUDING ANY CLAIM OR BREACH
OF WARRANTY HEREUNDER OR ANY OTHER CAUSE, AND
WHETHER ARISING IN CONTRACT OR IN TORT (including negligence
and strict liability).

Price Pfister has the right to discontinue or modify any product at any
time. Some states do not allow limitations or exclusions of incidental or
consequential damages, so the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.

The above warranties do not cover damage resulting from improper
maintenance, repair, cleaning or installation, misuse, abuse, alterations,
accidents or acts of God.

04-24-09 EO7399B

Copyright © 2009, Price Pfister, Inc.

Garantía Mecánica y sobre el Acabado Limitada de por Vida

Price Pfister

Cubre las funciones y el acabado por el tiempo en que usted sea

propietario de su casa

(Las Aplicaciones Comerciales Limitan la Duración

de las Garantías)

Price Pfister suministra las siguientes Garantías para sus productos. Es
posible que se requiera la presentación de una Prueba de compra para obtener
cualquiera de los beneficios indicados a continuación.

Garantías Limitadas: Price Pfister garantiza que por el tiempo en que el
comprador original sea propietario de la casa en el que se hubiese instalado
inicialmente el producto Price Pfister (el “Producto”), este Producto estará
libre de todo defecto en material y mano de obra que pueda afectar el
uso proyectado y correcto del Producto. Si el Producto se instala en una
aplicación comercial, la garantía mecánica que antecede estará limitada a un
período de diez (10) años a partir de la fecha de compra del Producto.

Price Pfister garantiza el acabado del Producto contra deterioro por el
tiempo en que el comprador original sea propietario de la casa en la que
hubiese instalado inicialmente el Producto. Si el Producto se instala en
una aplicación comercial, la garantía sobre el acabado que precede para
Productos que no contengan el acabado “Pforever” estará limitada a un
periodo de cinco (5) años a partir de la fecha de compra.

Recurso exclusivo: En el caso de que haya un defecto en el Producto
que viole las garantías que preceden, Price Pfister, a su opción, reparará o
reemplazará la pieza defectuosa del Producto. La reparación o el reemplazo
del Producto es el recurso exclusivo.

Para todo recurso con respecto a esta garantía, Price Pfister deberá ser
notificado, con una descripción del problema. Para notificar a Price Pfister y
recibir ayuda o servicio bajo esta garantía, el comprador original puede: (1)
llamar al 1-800-Pfaucet (1-800-732-8238) para hablar con un representante
de servicio al cliente que lo pueda ayudar, o (2) escribir al departamento de
servicio al consumidor, c/o Price Pfister Inc., 19701 DaVinci, Lake Forest,
CA 92610 U.S.A., e incluir una descripción del problema, el número del
modelo, su nombre, dirección, número de teléfono y fecha aproximada de
compra, o (3) enviar un e-mail al departamento de servicio al consumidor
de Price Pfister entrando en la página web www.PricePfister.com, o (4)
avisarle al lugar o al distribuidor en donde se compró el Producto. En
cualesquiera de los casos, podría pedírsele devolver el Producto a Price
Pfister para su inspección y es posible que se requiera la presentación de
una prueba de compra.

Limitaciones y Exclusiones:
PRICE PFISTER NO SE HARÁ RESPONSABLE DE NINGÚN OTRO DAÑO
O PERJUICIO, INCLUYENDO, PERO SIN ESTAR LIMITADO A DAÑOS
INCIDENTALES Y/O CONSECUENTES, SIN IMPORTAR LA TEORÍA LEGAL
A LA QUE SE ALEGUE, INCLUYENDO TODO RECLAMO O VIOLACIÓN DE
LA GARANTÍA PRESENTE O CUALQUIER OTRA CAUSA, Y YA SEAN COMO
RESULTADO DE LA LEY CONTRACTUAL O LA DE ANTECEDENTES
(incluyendo negligencia y responsabilidad estricta).

Price Pfister tiene el derecho de discontinuar o modificar cualquier producto
en cualquier momento. Ciertos estados no permiten limitaciones o
exclusiones de daños incidentales o consecuentes, de manera que es posible
que las limitaciones o exclusiones que preceden no correspondan en su caso.
Esta garantía le otorga derechos legales específicos y es posible que usted
también tenga otros derechos que difieren entre un estado y otro.

Las garantías que preceden no cubren daños y perjuicios ocasionados
como resultado de mantenimiento, reparaciones, limpieza o instalación
inadecuados, mal uso, abuso, alteraciones, accidentes o causas de fuerza
mayor.

Veuillez noter qu’une preuve d’achat peut être requise en cas de recours
au titre de la garantie.

Garantie limitée : Tant et aussi longtemps que l’acheteur sera propriétaire
du domicile dans lequel le produit Price Pfister a été installé, nous lui
garantissons que ce dernier sera exempt de tout défaut de matériau ou
vice de fabrication pouvant en entraver l’utilisation correcte tel que prévu.
Dans le cas des produits d’utilisation commerciale, la garantie exprimée
ci-dessus est restreinte à une période de dix (10) ans.

Par ailleurs, tant et aussi longtemps que l’acheteur sera propriétaire
du domicile dans lequel le produit Price Pfister a été installé, nous lui
garantissons un article dont la finition ne pourra se détériorer. Dans le cas
des produits d’utilisation commerciale qui ne comportent pas la finition
“Pforever”, la garantie est restreinte à une période de cinq (5) ans.

Recours exclusif : En cas de défaut du produit relevant de la garantie,
le fabricant pourra, à sa discrétion, réparer ou remplacer la partie
défectueuse. Cette mesure constitue un recours exclusif.

Pour tout recours au titre de la garantie, les clients doivent communiquer
avec le fabricant pour lui faire part du problème. L’acheteur d’origine
peut : (1) composer le 1 800 732-8238 pour parler à un représentant qui
l’assistera; (2) écrire au service à la clientèle : Price Pfister Inc., 19701
DaVinci, Lake Forest, CA 92610 U.S.A., et fournir une explication du
problème, en précisant le numéro de modèle, son nom, son adresse et
son numéro de téléphone, ainsi que la date d’achat approximative; (3)
communiquer par courrier électronique avec le service à la clientèle en
utilisant le site www.PricePfister.com, ou (4) aviser le détaillant qui a
vendu le produit. On peut être obligé de retourner le produit au fabricant,
et une preuve d’achat peut être exigée.

Limitations et exclusions :
PRICE PFISTER NE SERA PAS RESPONSABLE DES AUTRES
DOMMAGES OU PERTES, Y COMPRIS LES DOMMAGES
INDIRECTS, INDÉPENDAMMENT DE TOUTE THÉORIE
Y COMPRIS TOUTE RÉCLAMATION SELON LAQUELLE IL
Y AURAIT EU RUPTURE DE GARANTIE, QUE CE SOIT PAR
RAPPORT À UN CONTRAT OU PAR VOIE DE NÉGLIGENCE (cela
comprend la négligence et la responsabilité stricte).

Price Pfister se réserve le droit de discontinuer ou de modifier un produit
en tout temps. Certaines provinces ne permettent pas l’exclusion ou la
limitation des dommages indirects, de sorte que la limitation exprimée
peut ne pas s’appliquer. La présente garantie octroie aux clients certains
droits d’ordre juridique, et ceux-ci pourraient en avoir d’autres, selon la
province où ils habitent.

La garantie ne s’applique pas aux dommages résultant d’un entretien,
d’un nettoyage ou d’une installation fautivement effectués, ou encore
d’usages fautifs, d'abus, de modifications, d'accidents ou de catastrophes
naturelles.

Price Pfister

Une garantie limitée à vie

pour ce qui est de l’aspect mécanique et de la finition,

tant et aussi longtemps que vous serez propriétaire

de votre domicile.

(Garantie limitée en cas d’utilisation commerciale

– voir ci-dessous)

JURIDIQUE,

31502-0200

A COMPANY

ENGLISH

Thank you for purchasing this Price Pfister product. All Price Pfister products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price Pfister
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.

ENGLISH

2

5

FAUCET INSTALLATION

These instructions cover four different

installations

Models

34-1P

For 3 Hole Installation

No Side Spray

Go To Step 6

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.

Models

34-3P

3

For 3 Hole Installation

With Side Spray

3 TOOLS RECOMMENDED

• Plumber's putty • Slotted screwdriver • Pliers

• Adjustable wrench • Flashlight • Cloth

Your installation may require new supp ly lines and / or shut-of f valves or other additional
tools.

4

4D

4C

4A

4B

Go To Step 8

Models

34-4P

For 4 Hole Installation

With Side Spray

Go To Step 11

Models

34-1P/34-4P

Single Post Option

Installation

Go To Step 14

4 HANDLE ATTACHMENT

Place Lever Handle (4A) onto Valve Stem (4B) and secure with Fastener (4C) as shown.
Insert Decorative Button (4D) onto Lever Handle (4A).

2

6

ENGLISH

8

8D

ENGLISH

6A

6B

6C

6 FAUCET INSTALLATION

Following manufacturer’s recommendations on use, apply plumber’s putty into putty
groove in Deck Plate (6A). Insert the faucet Supply Tubes (6B) through the center hole
of the sink. Insert faucet Shanks (6C) through the end holes of the sink.

7

8A

8E

8D

8A

8C

8B

8 FAUCET INSTALLATION

Following manufacturer’s recommendations on use, apply plumber’s putty into putty
groove in Deck Plate (8A). Insert Hose Guide (8D) into the Side Hole (8E) in the Deck
Plate (8A). Align the hose guide Tabs to those in the Deck Plate Hole. Insert the faucet
Supply Tubes (8B) through the center hole of the sink. Insert faucet Shank (8C) and
Hose Guide (8D) through the end holes of the sink.

7B

7C

7F

7A

7D

7E

7 SECURING FAUCET TO DECK

From underneath sink, hand tighten Wing Nuts (7A) to Mounting Posts (7C). Remove
any excess putty from around the outside edge of Deck Plate (7B).
placing the Metal Washer (7D) and the Long Nut (
(7F). Make sure that the bumps on the Metal Washer (7D) are facing up. Tighten until the
faucet is firmly connected to the sink. Do not over tighten!

STOP

7

/16 Hex.) (7E) onto the Mounting Post

Go To Step 17

7C

7A

Secure the faucet by

9

9C

9A

9H

9B

9F

9G

9 SECURING FAUCET TO DECK

From underneath sink, secure the Hose Guide (9A) by screwing the Plastic Locknut
(9B). Secure Deck Plate (9C) by screwing Wing Nut (9D) to Mounting Post (9E). Hand
tighten. Remove any excess putty from around the outside edge of Deck Plate (9C).
Secure faucet by placing the Metal Washer (9F) and the Long Nut (7/16 Hex.) (9G) onto
Mounting Post (9H). Make sure that the bumps on the Metal Washer (9F) are facing up.
Tighten until the faucet is firmly connected to the sink. Do not over tighten!

3

9E

7D

10

ENGLISH

12

12E

12B

ENGLISH

10D

10B

10 SIDE SPRAY INSTALLATION

Insert Side Spray Hose (10A) through Hose Guide (10C). From underneath sink, push
Quick Co nnect Housing (10B), locate d on the end of the Spray Hose (10A), fir mly upwar d
onto the receiving Tube (10D), until unable to push any further. Pull down on the quick
connect housing (10B). If the housing and the Inner Collet (10E) separate slightly, but
does not pull off the receiving Tube (10D), quick connect is secure.

STOP

10C

10E

10D

10B

10B

10A

Go To Step 17

12H

12A

12F

12G

12 SECURING FAUCET TO DECK

From underneath sink, hand tighten Wing Nuts (12A) to Mounting Posts (12B), secure
Hose Guide (12C) by screwing Plastic Locknuts (12D). Hand tighten. Remove any
excess putty from around the outside edge of Deck Plate (12E).
placing the Metal Washer (
(

12

H). Make sure that the bumps on the Metal Washer (12F) are facing up. Tighten until

the faucet is firmly connected to the sink. Do not over tighten!

12

F) and the Long Nut (7/16 Hex.) (12G) onto the Mounting Post

12B

12A

12C

12D

Secure the faucet by

13

11

11A

11E

11D

11E

11B

11C

11 FAUCET INSTALLATION

Following manufacturer’s recommendations on use, apply plumber’s putty into putty
groove in Deck Plate (11A). Insert Hose Guide (11B) into Hose Guide Flange (11C) and
onto the sink hole. Insert the faucet Supply Tubes (11D) through the center hole of the
sink. Insert faucet Shanks (11E ) through the end holes of the sink.

13E

13D

13B

13B

13 SIDE SPRAY INSTALLATION

Insert Side Spray Hose (13A) through Hose Guide (13C). From underneath sink, push
Quick Connect Housing (13B), locate d on the end of the Spray Hose (13A), firm ly upward
onto the receiving Tube (13D), until unable to push any further. Pull down on the quick
connect housing (13B). If the housing and the Inner Collet (13E) separate slightly, but
do not pull off the receiving Tube (13D), quick connect is secure.

STOP

13D

13B

13A

Go To Step 17

4

13C

ENGLISH

14 16

ENGLISH

14F

14B

14C

14A

14G

14A

14 FAUCET PREPARATION

From underneath faucet, remove Nut (14A) from Mounting Post (14B). Remove Putty
Plate (14C) and Deck Plate (14D) from Faucet Body (14F ). Assemble Mounting Ring
(14E) and Putty Ring (14G) to Faucet Body (14F). Secure by placing and threading Nut
(14A) onto Mounting Post (14B).

14B

14D

14F

14E

16A

16D

16B

16C

16 SECURING FAUCET TO DECK

Remove any excess putty from around the outside edge of Mounting Ring (16A). From
underneath sink, secure the faucet by placing the Metal Washer (16B) and the Long

7

Nut (

/16 Hex.) (16C) onto the Mounting Post (16D). Make sure that the bumps on the

Metal Washer (16B) are facing up. Tighten until the faucet is firmly connected to the
sink. Do not over tighten!

17

17A

17A

15

15B

15A

17D

17B

17C

HOT

17 WATER SUPPLY LINES

Gently separate hot and cold Supply Tubes (17A), approximately three inches apart.
Connect water Supply Lines (17C) to Faucet Inlets (17B) . H ot w ate r s upp ly lin e g oe s to ho t
inlet fitt ing indicated by red ta g (17D). (Supply l ines not included ). Follow manufacturer’s
instructions when installing supply lines. Do not twist Supply Tubes (17A)!

17B

17C

COLD

18

15 FAUCET INSTALLATION

Following manufacturer’s recommendations on use, apply plumber’s putty into putty
groove in Putty Ring (15A). Insert the faucet Supply Tubes (15B) through the center
hole of the sink.

18 UNIT START UP

Turn on hot and cold water supplies, and check for leaks above and below the sink

Note: After installation is complete, flush faucet (see step 22).

5

.

ENGLISH

MAINTENANCE & CAREFAUCET FUNCTIONS

19

ENGLISH

19A

HOT

COLD

ON

19A

19 VALVE FUNCTION

By lifting the Lever Handle (19A) up, the valve will be activated allowing water to flow.
The water flow will increase by continuing to lift up the Lever Handle (19A). By rotating
the Lever Handle counter-clockwise, the water temperature will decrease to cold flow
only. By rotating the Lever Handle clockwise, the water temperature will increased to
hot flow only.

22

22B

22E

22D

22A

22C

22 FLUSHING & AERATOR CLEANING

After installation is complete, remove Aerator Housing (22A). Turn Valve (22B) on
and allow both hot and cold water to run for at least one minute each. While water is
running, check for leaks. To clean the aerator, disassemble Aerator Housing (22A) by
separating the Aerator Shell (22C), Basket (22D), and Washer (22E). Once parts have
been cleaned, reassemble by reversing steps.

20

20A

20 SPOUT FUNCTION

The Spout (20A) can be rotated around the Faucet Body in any direction.

21

21B

21A

23

23B

23A

23C

23D

21 SIDE SPRAY OPERATION

The Side Spray (21A) can be pulled for ward to spray water in any direction. To activate
the Side Spray, press the Toggle Button (21B) located on the back of the Side Spray
(21A).

23 HANDLE REMOVAL

Turn off water before proceeding!

(23A), unscrew Fastener (23B), and remove Handle Hub (23C) from Valve Stem (23D).

With valve in closed position, detach Decorative Button

6