Select one of the following means of access to view your
handbook on-line...
Find your handbook on the PEUGEOT website, under
"MyPEUGEOT".
This personal space offers advice and other useful information for
the care and maintenance of your vehicle.
Referring to the handbook on-line also gives you access to the
latest information available, easily identified by the bookmark,
associated with this symbol:
Scan this code for direct access to your handbook.
If the "MyPEUGEOT" function is not available on the PEUGEOT
public website for your country, you can find your handbook at the
following address:
http://public.servicebox.peugeot.com/ddb/
Select:
the language,
the vehicle, its body style,
the print edition of your handbook appropriate for the date of registration of
your vehicle.
This handbook describes all of the equipment available in the whole
range.
Your vehicle will be fitted with some of this equipment described in this
document, depending on its trim level, version and the specification for
the country in which it is sold.
Welcome
Thank you for choosing a 3008.
The descriptions and illustrations are given without any obligation.
Automobiles PEUGEOT reserves the right to modify the technical
specifications, equipment and accessories without having to update
this edition of the handbook.
This document is an integral part of your vehicle. It should be passed
on to the new user in the event of sale or transfer.
Key
safety warningadditional informationcontributes to the protection of
This handbook has been designed to help you make the most of
using your vehicle in all circumstances.
the environment
Contents
Overview
Eco-driving
.
.
Monitoring
Instrument panels 14
Indicator and warning lamps 16
Indicators 26
Distance recorders 30
Screen A without audio equipment 31
Screen A with audio equipment 33
Screen C
(PEUGEOT Connect Sound (RD5)) 35
16/9 retractable colour screen
(PEUGEOT Connect Navigation (RT6)) 38
Trip computer 41
Access
Remote control key 45
Alarm 50
Electric windows 52
Doors 54
Boot 57
Lower tailgate 58
Comfort
Heating and Ventilation 59
Manual air conditioning 61
Rear screen demist -
defrost 63
Dual-zone digital air conditioning 64
Front seats 67
Rear seats 72
Mi rr or s 74
Steering wheel adjustment 76
Visibility
Lighting controls 77
Daytime running lamps 81
Automatic illumination of headlamps 82
Interior ttings 94
Front armrest 96
Rear multimedia 98
Panoramic sunroof 101
Boot ttings 103
Child safety
Child seats 109
Deactivating the passenger's front airbag 111
ISOFIX mountings 118
Child lock 122
Contents
Safety
Direction indicators 123
Hazard warning lamps 123
Horn 123
ESC system 124
Grip control 127
Front seat belts 129
Airbags 132
Driving
Driving recommendations 136
Starting-switching off the engine 137
Electric parking brake 140
Hill start assist 144
Head-up display 147
Distance alert 149
Speed limiter 152
Cruise control 155
Manual gearbox 158
Electronic gearbox 159
Automatic gearbox 164
Gear efciency indicator 168
Stop & Start 169
Tyre under-ination detection 172
Parking sensors 174
Reversing camera 176
Parking space sensors 177
Checks
Fuel tank 180
Misfuel prevention (Diesel) 183
Running out of fuel (Diesel) 184
Opening the bonnet 185
Underbonnet - petrol engines 186
Underbonnet - Diesel engines 187
Checking levels 188
Checks 191
®
additive and SCR system
AdBlue
(BlueHDi Diesel) 193
Practical info rmat ion
Tool kit 201
Temporary puncture
repair kit 203
Changing a wheel 209
Snow chains 214
Changing a bulb 215
Changing a fuse 221
12 V battery 228
Energy economy mode 231
Changing a wiper blade 232
Towing the vehicle 232
Towbar with quickly detachable
towball 234
Towing a trailer 236
Fitting roof bars 238
Very cold climate screen 239
Accessories 240
Technical data
Petrol engines 242
Petrol weights 243
Diesel engines 245
Diesel weights 247
Under the bonnet, petrol 186
Under the bonnet, Diesel 187
Petrol engines 242
Diesel engines 245-246
Petrol weights 243
Diesel weights 247-248
Diesel LCV weights 249
Dimensions 250
11
Eco-driving
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
12
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting.
During acceleration change up early.
With an automatic or electronic gearbox, give preference to automatic
mode and avoid pressing the accelerator pedal heavily or suddenly.
The gear shift indicator invites you engage the most suitable gear: as
soon as the indication is displayed in the instrument panel, follow it
straight away.
For vehicles fitted with an electronic or automatic gearbox, this
indicator appears only in manual mode.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather
than the brake pedal, and press the accelerator progressively. These
practices contribute towards a reduction in fuel consumption and CO
emissions and also helps reduce the background traffic noise.
If your vehicle has cruise control, make use of the system at speeds
above 25 mph (40 km/h) when the traffic is flowing well.
2
Control the use of your electrical
equipment
Before moving off, if the passenger compartment is too warm, ventilate it
by opening the windows and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windows and leave the air vents
open.
Remember to make use of equipment that can help keep the
temperature in the passenger compartment down ( s unroof and window
blinds...).
Switch off the air conditioning, unless it has automatic regulation, as
soon as the desired temperature is attained.
Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.
Switch off the headlamps and front foglamps when the level of light
does not require their use.
Avoid running the engine before moving off, particularly in winter; your
vehicle will warm up much faster while driving.
As a passenger, if you avoid connecting your multimedia devices
(film, music, video game...), you will contribute towards limiting the
consumption of electrical energy, and so of fuel.
Disconnect your portable devices before leaving the vehicle.
.Eco-driving
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the heaviest items in the
bottom of the boot, as close as possible to the rear seats.
Limit the loads carried in the vehicle and reduce wind resistance (roof
bars, roof rack, bicycle carrier, trailer...). Use a roof box in preference.
Remove roof bars and roof racks after use.
At the end of winter, remove snow tyres and refit your summer tyres.
Observe the recommendat ions on
maintenance
Check the tyre pressures regularly, when cold, referring to the label in
the door aperture, driver's side.
Carry out this check in particular:
- before a long journey,
- at each change of season,
- after a long period out of use.
Don't forget the spare wheel and the tyres on any trailer or caravan.
Have your vehicle serviced regularly (engine oil, oil filter, air filter,
passenger compartment filter...) and observe the schedule of
operations recommended in the manufacturer's service schedule.
With a BlueHDi Diesel engine, if the SCR system is faulty your vehicle
becomes polluting; go to a PEUGEOT dealer or a qualified workshop
without delay to have the emissions of nitrous oxides brought back to
the legal level.
When refuelling, do not continue after the third cut-off of the nozzle to
avoid any overflow.
At the wheel of your new vehicle, it is only after the first 1 800 miles
(3 000 kilometres) that you will see the fuel consumption settle down to
a consistent average.
13
Monitoring
Instrument panels
Panel grouping together the vehicle operation indication dials and warning lamps.
Dials
1. Rev counter.
Indicates the engine speed (x 1 000 rpm).
2.Coolant temperature.Indicates the temperature of the engine
coolant (° Celsius).
3.Fuelgauge.Indicates the quantity of fuel remaining in
the tank.
4.Speedometer.Indicates the current speed of the moving
vehicle (mph or km/h).
5. Screen.
6. Control switch.
Temporary display of the service indicator
and driving range with the AdBlue
additive.
Display and reset the selected function (trip
distance recorder or service indicator).
7.Instrument panel lighting dimmer.Adjusts the brightness of the lighting of
the instruments and controls, if the vehicle
lighting is on.
For more information, refer to the
section corresponding to the button or
function and its associated display.
®
14
Monitoring
Screen(s)
1
A.Speed limiter
or
Cruise control.(mph or km/h)
B.Trip distance recorder.(miles or km)
C.Service indicator.(miles or km) or,
Engine oil level indicator (depending on
version).
or
distance recorder.(miles or km)
D.Gear shift indicator.Electronic or automatic gearbox.
E. Warning messages and function
status messages, trip computer,
GPS navigation information.
15
Monitoring
Indicator and warning lamps
Visual indicators informing the driver that a system is in operation (operation or deactivation indicator lamps) or of the occurrence of a fault (warning
lamp).
When the ignition is switched on
Certain warning lamps come on for a
few seconds when the vehicle's ignition is
switched on.
When the engine is started, these same
warning lamps should go off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation.
flashing with buzzer.The lighting stalk is pushed down.
Associated warnings
The illumination of certain warning lamps may
be accompanied by an audible signal and a
message in the multifunction screen.
The warning lamps may come on
continuously (fixed) or flash.
Certain warning lamps may come on
in one of two different modes. Only by
relating the type of illumination to the
operating status of the vehicle can it
be ascertained whether the situation is
normal or whether a fault has occurred.
16
Right-hand
direction indicator
Sidelampsfixed.The lighting stalk is in the
Dipped beam
headlamps
Main beam
headlamps
flashing with buzzer.The lighting stalk is pushed up.
"Sidelamps" position.
fixed.The lighting stalk is in the "Dipped
fixed.The lighting stalk is pulled towards
beam headlamps" position.
you.
Pull the stalk to return to dipped beam headlamps.
Front foglampsfixed.The front foglamps are switched on
Rear foglampsfixed.The rear foglamps are on.Turn the ring on the stalk rearward to switch off the
Diesel engine
pre-heating
Electric parking
brake
Deactivation of
the automatic
functions of the
electric parking
brake
fixed.The ignition switch is at the
fixed.The electric parking brake is applied.
fixed.The "automatic application"
using the ring on the lighting control
stalk.
2nd position (ignition on).
(on switching off the engine) and
"automatic release" functions are
deactivated or faulty.
Turn the ring on the lighting control stalk rearward
twice to switch off the front foglamps.
rear foglamps.
Wait until the warning lamp has switched off before starting.
The duration for which the warning lamp is on is
determined by the climatic conditions.
Release the electric parking brake to switch off the
warning lamp: with your foot on the brake pedal, pull
the electric parking brake control lever.
Observe the safety recommendations.
For more information on the electric parking brake,
refer to the corresponding section.
Activate the function (depending on the country of
sale) via the vehicle configuration menu or contact a
PEUGEOT dealer or a qualified workshop if automatic
application / release is not possible.
For more information on the electric parking brake,
refer to the corresponding section.
fixed.The brake pedal is not pressed.You must press the brake pedal firmly to:.
- start the engine with an electronic gearbox (lever
in position N),
- manually release the parking brake.
18
flashing.
Parking space
sensors
Stop & Startfixed.
fixed.The parking space sensors function
flashing.The system is measuring the space.Once the measurement has been done, the warning
flashes for a few
seconds, then goes
off.
With an electronic gearbox, if you
hold the vehicle on an incline using
the accelerator for too long, the
clutch overheats.
is active.
When the vehicle stops (red lights,
traffic jams, ...) the Stop & Start
system has put the engine into STOP
mode.
STOP mode is temporarily
unavailable.
or
START mode is invoked
automatically.
Use the brake pedal and/or the electric parking brake.
Press the corresponding button to deactivate it.
lamp comes on fixed again.
The warning lamp goes off and the engine restarts
automatically in START mode, as soon as you want to
move off.
For more information on Stop & Start, refer to the
corresponding section.
Monitoring
Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
This is may be accompanied by an audible signal and a message in the multifunction screen.
is set to the OFF position.
The passenger's front airbag is
deactivated.
You can install a rearward facing
child seat, unless there is a fault with
the operation of the airbags (Airbag
warning lamp on).
Set the control to the ON position to activate the
passenger's front airbag.
In this case, do not fit a child seat in the rearward
facing position.
Warning lamps
When the engine is running or the vehicle is being driven, the illumination of one of the following warning lamps indicates a fault which requires action
on the part of the driver.
Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the multifunction screen.
If you encounter any problems, do not hesitate to contact a PEUGEOT dealer or a qualified workshop.
associated with
another warning lamp,
accompanied by an
audible signal and a
message in the screen.
Illumination of this warning lamp is
associated with a serious fault with
the braking system, power steering,
engine lubrication system or cooling
system.
Stop as soon as it is safe to do so as there is a risk
that the engine will cut out while driving.
Park, switch off the ignition and contact a PEUGEOT
dealer or a qualified workshop.
fixed, associated
with the flashing and
then fixed display of
the service indicator
spanner.
One or more minor faults for which
there is no specific warning lamp
have been detected.
One or more major faults for which
there is no specific warning lamp
have been detected.
The servicing interval has been
exceeded.
Identify the cause of the fault using the message
displayed in the screen.
You can deal with some problems yourself, such as a
door open or the start of saturation of the particle filter
(as soon as the traffic conditions allow, regenerate
the filter by driving at a speed of at least 40 mph
(60 km/h), until the warning lamp goes off).
For any other problems, such as a fault with the tyre
under inflation detection system, contact a PEUGEOT
dealer or a qualified workshop.
Identify the cause of the fault using the message
displayed in the screen; you must then contact a
PEUGEOT dealer or a qualified workshop.
Only on BlueHDi Diesel versions.
Your vehicle must be serviced as soon as possible.
fixed, associated with the
electric parking brake
malfunction warning
lamp, if the parking brake
is released.
the STOP and ABS
warning lamps.
applied automatically.
The application/release is faulty.
The braking system fluid level has
dropped significantly.
The braking system has a fault.You must stop as soon as it is safe to do so.
The electronic brake force distribution
(EBFD) system has a fault.
You must stop as soon as it is safe to do so.
Park on flat level ground, engage a gear (or place the
lever in position P for an automatic gearbox), switch
off the ignition and contact a PEUGEOT dealer or a
qualified workshop.
Contact a PEUGEOT dealer or a qualified workshop
without delay.
For more information on the electric parking brake,
refer to the corresponding section.
You must stop as soon as it is safe to do so.
Top up with brake fluid recommended by PEUGEOT.
If the problem persists, have the system checked by a
PEUGEOT dealer or a qualified workshop.
Park, switch off the ignition and contact a PEUGEOT
dealer or a qualified workshop.
You must stop as soon as it is safe to do so.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
1
Anti-lock
Braking System
(ABS)
fixed.The anti-lock braking system has a
fault.
The vehicle retains conventional braking.
Drive carefully at reduced speed and contact a
PEUGEOT dealer or a qualified workshop without
delay.
fixed.The DSC/ASR system has a fault.Have it checked by a PEUGEOT dealer or a qualified
flashing.The engine management system has
fixed.The emission control system has a
in the red zone.
fixed with the needle
in the red zone.
fixed.There is a fault with the engine
operating.
a fault.
fault.
When it first comes on there remains
approximately 6 litres of fuel in the
tank.
At this point, you begin to use the fuel
reserve.
The temperature of the cooling
system is too high.
lubrication system.
The system optimises traction and improves the
directional stability of the vehicle in the event of loss of
grip or trajectory.
workshop.
Risk of destruction of the catalytic converter.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
The warning lamp should go off when the engine is started.
If it does not go off, contact a PEUGEOT dealer or qualified
workshop without delay.
Refuel as soon as possible to avoid running out of fuel.
This warning lamp will come on every time the ignition
is switched on, until a sufficient addition of fuel is made.
Fuel tank capacity: approximately 60 litres.
Never continue to drive until you run out of fuel, as
this could damage the emission control and injection
systems.
Stop as soon as it is safe to do so.
Wait until the engine has cooled down before topping
up the level, if necessary.
If the problem persists, contact a PEUGEOT dealer or
a qualified workshop.
You must stop as soon it is safe to do so.
Park, switch off the ignition and contact a PEUGEOT
dealer or a qualified workshop.
fixed, on switching on the
ignition, associated with
the SERVICE and engine
diagnostic warning lamps,
accompanied by an audible
signal and a message.
flashing, on switching on
the ignition, associated with
the SERVICE and engine
diagnostic warning lamps,
accompanied by an audible
signal and a message
indicating the remaining
driving range.
flashing, on switching on
the ignition, associated with
the SERVICE and engine
diagnostic warning lamps,
accompanied by an audible
signal and a message.
A fault with the SCR
emissions control system has
been detected.
After confirmation of the fault
with the emissions control
system, you can drive for up
to 650 miles (1 100 km) before
the engine starting inhibition
system is triggered.
You have exceeded the
authorised driving limit
following confirmation of
a fault with the emissions
control system: the engine
starting inhibition system
prevents starting of the
engine.
This alert disappears once the exhaust emissions
return to normal levels.
Contact a PEUGEOT dealer or a qualified workshop
without delay, to avoid a breakdown.
To be able to start the engine, you must call on a
PEUGEOT dealer or a qualified workshop.
Under-inflationfixed.The pressure in one or more wheels
+flashing then fixed,
flashing.The directional headlamps system
accompanied by the
Service warning lamp.
Coolant temperature gauge
has a fault.
is too low.
The tyre pressure monitoring system
has a fault or no sensor is detected
on one of the wheels.
With the engine running, when the needle is:
- in zone A, the temperature is correct,
- in zone B, the temperature is too high;
the max temperature warning lamp 1 and
the central STOP warning lamp come on,
accompanied by an audible signal and a
message in the screen.
You must stop as soon as it is safe to do so.
Wait a few minutes before switching off the
engine.
Contact a PEUGEOT dealer or a qualified
workshop.
Have it checked by a PEUGEOT dealer or a qualified
workshop.
Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
Under-inflation detection is not assured.
Have the system checked by a PEUGEOT dealer or a
qualified workshop.
After driving for a few minutes, the temperature
and pressure in the cooling system increase.
To top up the level:
F wait for the engine to cool,
F unscrew the cap by two turns to allow the
pressure to drop,
F when the pressure has dropped, remove
the cap,
F top up the level to the "MAX" mark.
26
Monitoring
Service indicator
System which informs the driver when the
next service is due, in accordance with the
manufacturer's servicing schedule.
The point at which the service is due is
calculated from the last indicator zero reset,
according to the mileage covered since the last
service.
For BlueHDi Diesel versions, depending on the
country of sale, the level of deterioration of the
engine oil may also be taken into account.
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service
information appears in the screen.
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the
spanner symbolising the service operations comes
on. The distance recorder display line indicates the
distance remaining before the next service is due.
Example: 1 700 miles (2 800 km) remain before
the next service is due.
For 5 seconds after the ignition is switched on, the
screen indicates:
5 seconds after the ignition is switched on,
the spanner goes off; the distance recorder
resumes its normal operation. The screen then
indicates the total and trip distances.
1
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560 miles (900 km) remain before
the next service is due.
For 5 seconds after the ignition is switched on,
the screen indicates:
5 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on to
indicate that a service must be carried out
soon.
27
Monitoring
Service overdue
For 5 seconds after the ignition is switched on,
the spanner flashes to indicate that the service
must be carried out as soon as possible.
Example: the service is overdue by 186 miles
(300 km).
For 5 seconds after the ignition is switched on,
the screen indicates:
For BlueHDi versions, the spanner may
also come on early, according to the
level of deterioration of the engine oil,
which depends on the driving conditions
in which the vehicle is used.
If you have carried out the service on your
vehicle yourself:
F switch off the ignition,
F press and hold the trip distance recorder
zero reset button,
F switch on the ignition; the distance recorder
display begins a countdown,
F when the display indicates "=0", release
the button; the spanner disappears.
28
5 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on.
With BlueHDi Diesel versions, the
Service warning lamp also comes on
when the ignition is switched on.
Resetting the service indicator
After each service, the service indicator must
be reset to zero.
If you have to disconnect the battery
following this operation, lock the vehicle
and wait at least five minutes for the
reset to be registered.
Retrieving the service
information
You can access the service information at any
time.
F Press the trip distance recorder zero reset
button.
The service information is displayed for a
few seconds, then disappears.
Loading...
+ 314 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.