Petzl ABSORBICA-I User Manual

V2 21/3/2020

ABSORBICA-I

ABSORBICA-I is a single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or
cable) or on an elevated platform, without passing intermediate anchors. It has several installation options on the harness
and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without
connectors). The 150 cm version has an elasticized arm, to avoid hindering progression. Depending on the connectors
used, ABSORBICA-I is certified to American, European and Russian standards.

ABSORBICA-I single lanyards
are designed particularly for
protection on a horizontal
lifeline or on an elevated
platform, without passing
intermediate anchors.

In the event of a fall, the tearing
of the energy absorber webbing
limits the impact force on the
user. The lanyards are
designed for users who weigh
between 50 and 130 kg. The
progressive tearing of the
webbing reduces the
deceleration on lightweight
users.

The energy absorber is very
compact, to avoid hindering the
user’s movements, or
interfering with handling. A
durable fabric pouch helps
protect the energy absorber
from abrasion and potential
contaminants.

Universe

Professional

Type

Verticality

Category

Lanyards and energy absorbers

Subcategory

Fall arrest lanyards

/ 1 3

V2 - 21/3/2020

Short Description

Single lanyard with integrated energy absorber

Selling Points

• Designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate
anchors

• Absorbs energy in the event of a fall:

- tearing of the energy absorber webbing limits the impact force on the user

- works with users who weigh between 50 and 130 kg

- progressive tearing reduces the deceleration on lightweight users

• Minimal bulk:

- compact energy absorber facilitates handling

- FLEX version with 150 cm of elasticized webbing to avoid hindering progression

• Durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while
allowing for regular inspection of the absorber

• Two options for installation on the harness, depending on use:

- frequent connection/disconnection: with a carabiner held in correct position by the STRING positioning accessory (included
with the lanyard)

- semi-permanent connection: with a RING OPEN gated ring, whose circular shape ensures optimal positioning

• Two connector options for the end of the lanyard: a locking carabiner, or MGO OPEN connector with large gate opening

• Available in two lengths: 80 and 150 cm

Specification

• Material(s): polyester, nylon

• Certification(s): CE EN 355 when used with EN 362 connectors, ANSI Z359.13 12 feet when used with ANSI Z359.12
connectors, EAC

/ 2 3