Pentax Optio P70 Quick Start Guide

OptioP70_QSG.fm Page -1 Wednesday, January 21, 2009 9:46 AM

Thank you for purchasing
this PENTAX Digital Camera.

When you use this camera for the first
time, it is recommended you read this
Quick Guide first in order to gain
a feel for the basic operation of the
camera. Refer to the separately
supplied "Operating Manual" by CD
for further explanation of functions
and advanced operations of
the camera.

OptioP70_QSG.fm Page 0 Wednesday, January 21, 2009 9:46 AM

To users of this camera

• Do not use or store this device in the vicinity of equipment that generates
strong electromagnetic radiation or magnetic fields.
Strong static charges or the magnetic fields produced by equipment such
as radio transmitters could interfere with the monitor, damage data stored
on the memory card, or affect the product's internal circuitry and cause
camera misoperation.

• The liquid crystal panel used in the display is manufactured using extremely
high precision technology. Although the level of functioning pixels is 99.99%
or better, you should be aware that 0.01% or fewer of the pixels may not
illuminate or may illuminate when they should not. However, this has no effect
on the recorded image.

• There is a possibility that the illustrations and the display screen in this
manual are different from the actual product.

• In this manual, both an SD Memory Card and an SDHC Memory Card are
referred to as SD Memory Cards hereafter.

• In this manual, the generic term “computer(s)” refers to either a Windows PC
or a Macintosh hereafter.

OptioP70_QSG.fm Page 1 Wednesday, January 21, 2009 9:46 AM

USING YOUR CAMERA SAFELY

We have paid close attention to the safety of this product. When using
this product, we request your special attention regarding items marked
with the following symbols.

Warning This symbol indicates that violating this item could cause

Caution This symbol indicates that violating this item could cause

About the Camera

Warning

• Do not attempt to take the camera apart or remodel the camera.
High voltages are present within the camera, and there is therefore
a danger of electric shocks if the camera is taken apart.

• If the inside of the camera should become exposed as a result of,
for example, the camera being dropped, please do not under any
circumstances touch such exposed portions, as there is a danger
of receiving an electric shock.

• To avoid the risk of it being swallowed by mistake, keep the SD Memory Card
out of the reach of small children. Seek medical attention immediately if
a card is accidentally swallowed.

• Wrapping the strap of the camera around your neck is also dangerous.
Please take care that small children do not hang the strap around their necks.

• Use an AC adapter that is of the power and voltage specified for exclusive
use with this product. The use of an AC adapter other than that specified
exclusively for use with this product may cause fire or electric shocks.

• If the camera emits smoke or a strange smell, or in the event of any other
irregularity, stop using the camera immediately, remove the battery and
contact your nearest PENTAX Service Center. Continued use of the camera
may result in fire or electric shock.

serious personal injuries.

minor or medium personal injuries, or material losses.

Caution

•

Do not charge any batteries other than rechargeable lithium-ion battery D-LI88.
The battery could explode or catch fire.

• Do not place your finger on the flash when it is discharging as there is a risk
of burns.

1

OptioP70_QSG.fm Page 2 Wednesday, January 21, 2009 9:46 AM

• Do not discharge the flash while it is touching your clothing as there is a risk
of discoloring.

• If any leakage from the battery should come in contact with your eyes, it
may cause a loss of sight. Flush your eyes with clean water and get medical
attention immediately. Do not rub them.

• If any leakage from the battery should come in contact with skin or clothes,
it may cause irritation to the skin. Wash the affected areas thoroughly
with water.

• Precautions for D-LI88 Battery Usage:

- BATTERY MAY EXPLODE OR FIRE IF MISTREATED.

- DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE.

- DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION.

- DO NOT HEAT ABOVE 140°F /60°C, OR SHORT CIRCUIT.

- DO NOT CRUSH OR MODIFY.

• Remove the battery from the camera immediately if it becomes hot
or begins to smoke. Be careful not to burn yourself during removal.

• Some portions of the camera heat up during use, so please take care, as
there is a risk of low temperature burns if such portions are held for long
periods of time.

• Should the LCD be damaged, be careful of glass fragments. Also, be careful
not to allow the liquid crystal to get on your skin or in your eyes or in
your mouth.

• Depending on your inherent factors or physical condition, the use of
the camera may cause itching, rashes or blisters. In case of any abnormality,
stop using the camera and get medical attention immediately.

About the Battery Charger and the AC Adapter

Warning

• Do not use the product at a voltage other than the specified voltage.
Use with a power source or voltage other than that designated can cause
a fire or electrical shock. The specified voltage is 100-240V AC.

• Do not disassemble or modify the product. This can cause a fire or electrical
shock.

•

If the generation of smoke or strange odor from the product or other abnormality
occurs, immediately discontinue using and consult a PENTAX Service Center.
Continuing to use the product can cause a fire or electrical shock.

2

OptioP70_QSG.fm Page 3 Wednesday, January 21, 2009 9:46 AM

• If water should happen to get inside the product, consult a PENTAX Service
Center. Continuing to use the product can cause a fire or electrical shock.

• If a thunder storm should be present during use of the battery charger or
AC adapter, unplug the power cord and discontinue use. Continuing to use
the product can cause damage to the equipment, fire or electrical shock.

• Wipe off the plug of the power cord if it should become covered with dust.
This can cause a fire.

Caution

• Do not place heavy objects on the AC plug cord, allow heavy objects to drop
onto it or allow the AC plug cord to become damaged due to excessive
bending. If the AC plug cord becomes damaged, consult a PENTAX
Service Center.

• Do not short or touch the output terminals of the product while it is still
plugged in.

• Do not plug in the AC plug cord with wet hands. This can cause an electrical
shock.

• Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.

• Do not use the battery charger to charge batteries other than rechargeable
lithium-ion battery D-LI88. This can cause overheating, explosion or
malfunctions.

• To reduce the risk of hazards, use only CSA/UL Certified power supply cord
set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end
with a molded-on male attachment plug cap (with a specified NEMA
configuration), and the other is provided with a molded-on female connector
body (with a specified IEC nonindustrial type configuration) or the equivalent.

3

OptioP70_QSG.fm Page 4 Wednesday, January 21, 2009 9:46 AM

Care to be Taken During Handling

• When traveling, take the Worldwide Service Network listing that is included
in the package. This will be useful if you experience problems abroad.

• When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at
a wedding or during traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a computer,
etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.

• The lens on this camera is not interchangeable. The lens is not removable.

• Do not clean the product with organic solvents such as thinner, alcohol or
benzene.

• Places of high temperature and humidity should be avoided. Particular care
should be taken regarding vehicles, which can become very hot inside.

• This camera is not waterproof. Do not use this camera where it might come
in contact with rain, water, or any other liquid.

• Storing the camera where pesticides and chemicals are handled should be
avoided. Remove the camera from its case and store in a well-ventilated
place to prevent the camera from becoming moldy during storage.

• Ensure that the camera is not subjected to substantial vibrations, shocks or
pressure as this may cause damage or malfunction. Place the camera on
a cushion for protection when the camera is subjected to the vibrations of
a motorbike, car, ship, etc. If the camera is subjected to substantial
vibrations, shocks or pressure, take your camera to your nearest PENTAX
Service Center and have it checked.

• The temperature range in which the camera can be used is 0°C to 40°C
(32°F to 104°F).

• The liquid crystal display will become black at a high temperature but will
return to normal when normal temperatures are returned to.

• The response speed of the liquid crystal display becomes slow at low
temperatures. This is due to the properties of the liquid crystal and is not
a fault.

• Periodic checks are recommended every 1 to 2 years in order to maintain
high performance.

• If the camera is subjected to rapid temperature changes, condensation may
form on the inside and outside of the camera. Therefore put the camera
in a bag or plastic bag, and take the camera out when the difference in
temperature has subsided.

4

OptioP70_QSG.fm Page 5 Wednesday, January 21, 2009 9:46 AM

• Please note that formatting an SD Memory Card or the built-in memory will
delete all data; however it may still be possible to recover that data using
off-the-shelf data recovery software. Please manage your camera memory
at your own risk.

• Please do not press forcefully on the display. This could cause breakage or
malfunction.

• Be careful not to sit down with the camera in your back pocket as this may
damage the exterior of the camera or the display.

• When using a tripod with the camera, be careful not to overtighten the screw
in the tripod socket on the camera.

•

The AC plug cord supplied with the camera is for exclusive use with the battery
charger D-BC88. Do not use it with any other equipment.

• Storing the battery fully charged may decrease the battery performance.
Avoid storing it especially in high temperatures.

• If the battery is left inserted and the camera is not used for a long time,
the battery will over-discharge and shorten the battery’s service life.

• Charging the battery a day before use or on the day of use is recommended.

5

OptioP70_QSG.fm Page 6 Wednesday, January 21, 2009 9:46 AM

Checking the Contents of the Package

Check that your camera comes complete with the items
listed below.

P Camera (Optio P70) P Strap (O-ST51)

P Software (CD-ROM) S-SW87 P USB cable (I-USB7)

P AV cable (I-AVC7) P Rechargeable lithium-ion battery

P Battery charger (D-BC88) P AC plug cord

P Operating Manual O Quick Guide (this guide)

6

(D-LI88)