Pentax M50 User Manual

Digital Camera

Operating Manual

To ensure the best performance from your camera, please read the Operating Manual before using the camera.

Thank you for purchasing this PENTAX Digital Camera. Please read this manual before using the camera in order to get the most

out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera capabilities.

Regarding copyrights

Images taken using the PENTAX Digital Camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.

To users of this camera

• There is a possibility that recorded data may be erased or that the camera may not function correctly when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields.

• The liquid crystal panel used in the display is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.

• There is a possibility that the illustrations and the display screen of the display in this manual are different form the actual product.

• In this manual, both an SD Memory Card and an SDHC Memory Card are referred to as SD Memory Cards hereafter.

Regarding trademarks

• PENTAX and Optio are trademarks of PENTAX Corporation.

• SDHC logo ( ) is trademark.

• This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image Matching III compliant. Copyright 2001 Seiko Epson Corporation. All Rights Reserved. PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT Image Matching logo is a trademark of Seiko Epson Corporation.

• All other brands or product names are trademarks or registered trademarks of their respective companies.

Regarding PictBridge

PictBridge allows the user to connect the printer and digital camera directly, using the unified standard for the direct printout of images. You can print images directly from the camera through a few simple operations.

Regarding Product Registration

In order to serve you better, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or the PENTAX website. Thank you for your cooperation. Refer to the PC Connection Manual (bottom right of the front side) for more information.

USING YOUR CAMERA SAFELY

We have paid close attention to the safety of this product. When using this product, we request your special attention regarding items marked with the following symbols.

Warning

Caution

This symbol indicates that violating this item could cause serious personal injuries.

This symbol indicates that violating this item could cause minor or medium personal injuries, or material losses.

About the Camera

Warning

• Do not attempt to take the camera apart or remodel the camera. High voltages are present within the camera, and there is therefore a danger of electric shocks if the camera is taken apart.

• If the inside of the camera should become exposed as a result of, for example, the camera being dropped, please do not under any circumstances touch such exposed portions, as there is a danger of receiving an electric shock.

• To avoid the risk of it being swallowed by mistake, keep the SD Memory Card out of the reach of small children. Seek medical attention immediately if a card is accidentally swallowed.

• Wrapping the strap of the camera around your neck is also dangerous. Please take care that small children do not hang the strap around their necks.

• Use an AC adapter that is of the power and voltage specified for exclusive use with this product. The use of an AC adapter other than that specified exclusively for use with this product may cause fire or electric shocks.

• If the camera emits smoke or a strange smell, or in the event of any other irregularity, stop using the camera immediately, remove the battery and contact your nearest PENTAX Service Center. Continued use of the camera may result in fire or electric shock.

Caution

• Do not charge any batteries other than rechargeable lithium-ion battery D-LI78. The battery could explode or catch fire.

• Do not place your finger on the flash when it is discharging as there is a risk of burns.

• Do not discharge the flash while it is touching your clothing as there is a risk of discoloring.

• If any leakage from the battery should come in contact with your eyes, it may cause a loss of sight. Flush your eyes with clean water and get medical attention immediately. Do not rub them.

• If any leakage from the battery should come in contact with skin or clothes, it may cause irritation to the skin. Wash the affected areas thoroughly with water.

• Precautions for D-LI78 Battery Usage:

- USE SPECIFIED CHARGER ONLY.

- DO NOT INCINERATE.

- DO NOT DISASSEMBLE.

- DO NOT SHORT CIRCUIT.

- DO NOT EXPOSE TO HIGH TEMP. (140°F / 60°C)

• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.

• Some portions of the camera heat up during use, so please take care, as there is a risk of low temperature burns if such portions are held for long periods of time.

• Should the LCD be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or in your mouth.

• Depending on your inherent factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.

About the Battery Charger and the AC Adapter

Warning

• Do not use the product at a voltage other than the specified voltage. Use with a power source or voltage other than that designed can cause a fire or electrical shock. The specified voltage is 100-240V AC.

• Do not disassemble or modify the product. This can cause a fire or electrical shock.

• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult a PENTAX Service Center. Continuing to use the product can cause a fire or electrical shock.

• If water should happen to get inside the product, consult a PENTAX Service Center. Continuing to use the product can cause a fire or electrical shock.

• If thunder storm should be present during use of the battery charger or AC adapter, unplug the power cord and discontinue use. Continuing to use the product can cause damage to the equipment, fire or electrical shock.

• Wipe off the plug of the power cord if it should become covered with dust. This can cause a fire.

Caution

• Do not place heavy objects on the AC plug cord, allow heavy objects to drop onto it or allow the AC plug cord to become damaged due to excessive bending. If the AC plug cord becomes damaged, consult a PENTAX Service Center.

• Do not short or touch the output terminals of the product while it is still plugged in.

• Do not plug in the AC plug cord with wet hands. This can cause an electrical shock.

• Do not subject the product to strong impacts or allow it to drop onto a hard surface. This can cause a malfunction.

• Do not use the battery charger to charge batteries other than rechargeable lithium-ion battery D-LI78. This can cause overheating or malfunctions.

• To reduce the risk of hazards, use only CSA/UL Certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.

Care to be Taken During Handling

• When traveling, take the Worldwide Service Network listing that is included in the package. This will be useful if you experience problems abroad.

• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or during traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (SD Memory Card), etc.

• The lens on this camera is not interchangeable. The lens is not removable.

• Do not clean the product with organic solvents such as thinner, alcohol or benzene.

• Places of high temperature and humidity should be avoided. Particular care should be taken regarding vehicles, which can become very hot inside.

• This camera is not waterproof. Do not use this camera where it might come in contact with rain, water, or any other liquid.

• Storing the camera where pesticides and chemicals are handled should be avoided. Remove the camera from its case and store in a well-ventilated place to prevent the camera from becoming moldy during storage.

• Ensure that the camera is not subjected to substantial vibrations, shocks or pressure as this may cause damage or malfunction. Place the camera on a cushion for protection when the camera is subjected to the vibrations of a motorbike, car, ship, etc. If the camera is subjected to substantial vibrations, shocks or pressure, take your camera to your nearest PENTAX Service Center and have it checked.

• The temperature range in which the camera can be used is 0°C to 40°C (32°F to 104°F).

• The liquid crystal display will become black at a high temperature but will return to normal when normal temperatures are returned to.

• The response speed of the liquid crystal display becomes slow at low temperatures. This is due to the properties of the liquid crystal and is not a fault.

• Periodic checks are recommended every 1 to 2 years in order to maintain high performance.

• If the camera is subjected to rapid temperature changes, condensation may form on the inside and outside of the camera. Therefore put the camera in a bag or plastic bag, and take the camera out when the difference in temperature has subsided.

• Refer to “Precautions When Using an SD Memory Card” (p.30) regarding the SD Memory Card.

• Please note that formatting an SD Memory Card or built-in memory will delete all data; however it may still be possible to recover that data using off-the-shelf data recovery software. Please manage your camera memory at your own risk.

• Please do not press forcefully on the display. This could cause breakage or malfunction.

• Be careful not to sit down with the camera in your back pocket as this may damage the exterior of the camera or the display.

• When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket on the camera.

• The AC plug cord supplied with the camera is for exclusive use with the battery charger D-BC78. Do not use it with any other equipment.

• Storing the battery fully charged may decrease the battery performance. Avoid storing it especially in high temperatures. If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s service life.

• Charging the battery a day before use or on the day of use is recommended.

USING YOUR CAMERA SAFELY....................................................1

Care to be Taken During Handling ...................................................4

Contents ...........................................................................................6

Composition of the Operating Manual ............................................11

Camera Features.................................................................................12

Checking the Contents of the Package ..........................................15

Names of Parts...............................................................................16

Names of Operating Parts..............................................................17

Monitor Indications .........................................................................18

Getting Started 21

Attaching the Strap.............................................................................21

Powering the Camera .........................................................................22

Charging the Battery.......................................................................22

Installing the Battery.......................................................................23

Using the AC Adapter.....................................................................26

Installing the SD Memory Card..........................................................28

Recorded Pixels and Quality Level of Still Pictures........................31

Recorded Pixels, Quality Level and Frame Rate of Movies ...........32

Turning the Camera On and Off ........................................................34

Playback Mode...............................................................................35

Initial Settings .....................................................................................36

Setting the Display Language.........................................................36

Setting the Date and Time ..............................................................38

Quick Start 40

Taking Still Pictures............................................................................40

Playing Back Still Pictures.................................................................42

Playing Back Images ......................................................................42

Playing Back the Previous or Next Image ......................................42

Rotating the Displayed Image ........................................................43

Common Operations 44

Understanding the Button Functions ...............................................44

A Mode .........................................................................................44

Q Mode ........................................................................................46

Setting the Camera Functions...........................................................48

Setting with the Menus ...................................................................48

Menu List ........................................................................................51

Setting the Shooting Mode .............................................................53

Setting the Face Recognition function ............................................56

Calling Up a Specific Menu ............................................................57

Using the Playback Function..........................................................59

Taking Pictures 61

Taking Pictures ...................................................................................61

Taking Pictures Automatically (Auto Picture Mode) .......................61

Setting The Functions (Program Mode) .........................................62

Taking Pictures in the Basic Mode (Green Mode) ..........................63

Taking Pictures of Dark Scenes

(Night Scene/Digital SR (Blur Reduction) Mode)............................ 65

Framing Your Pictures (Frame Composite)....................................66

Taking Pictures of People (Natural Skin Tone/Portrait Mode)........68

Taking Pictures of Your Pet (Pet Mode) ......................................... 70

Taking Pictures of Children (Kids Mode) ........................................ 72

Taking Panoramic Pictures (Digital Panorama Mode).................... 74

Using the Self-timer........................................................................76

Taking a Series of Pictures (Continuous Shooting Mode)..............77

Using the Zoom ..............................................................................78

Using the Digital Wide Function (Digital Wide Mode) ..................... 81

Setting the Exposure (EV Compensation) ...................................... 84

Displaying Shooting Information in Capture Mode .........................85

Setting the Shooting Functions.........................................................87

Selecting the Focus Mode ..............................................................87

Selecting the Flash Mode...............................................................89

Selecting the Recorded Pixels........................................................91

Selecting the Quality Level.............................................................93

Adjusting the White Balance...........................................................94

Setting the AE Metering..................................................................96

Setting the Sensitivity .....................................................................98

Setting the Autofocus Conditions .................................................100

Setting the Instant Review Time (Instant Review)........................ 101

Setting the Image Sharpness (Sharpness)...................................102

Setting the Color Saturation (Saturation)......................................103

Setting the Image Contrast (Contrast)..........................................104

Setting the Date Imprint Function .................................................105

Saving the Settings (Memory) .........................................................106

Recording Movies.............................................................................108

Recording a Movie........................................................................108

Selecting the Recorded Pixels for Movies .................................... 110

Selecting the Quality Level of Movies...........................................111

Selecting the Frame Rate.............................................................112

Recording Movies in Black and White or Sepia Tones

(Color Mode).................................................................................113

Setting the Movie SR (Movie Shake Reduction) Function............ 114

Playing Back and Deleting Images 115

Playing Back Images ........................................................................115

Switching Between A Mode and Q Mode.................................115

Playing Back Still Pictures............................................................115

Nine-Image Display, Folder Display and Calendar Display.......... 116

Zoom Playback.............................................................................118

Zoom Up On the Subject’s Face Automatically

(Face close-up playback) .............................................................119

Displaying Shooting Information in Playback Mode .....................121

Correcting Camera Shake with Digital SR....................................122

Slideshow .....................................................................................123

Playing Back Movies ........................................................................125

Playing Back a Movie ...................................................................125

Connecting the Camera to AV Equipment...................................... 126

Deleting Images ................................................................................128

Deleting a Single Image/Sound File .............................................128

Deleting Selected Images and Sound Files

(from Nine-Image Display)............................................................130

Deleting All Images and Sound Files............................................132

Recovering Deleted Images .........................................................133

Protecting Images and Sound Files from Deletion (Protect) ........134

Editing and Printing Images 136

Editing Images ..................................................................................136

Changing the Image Size and Quality (Resize)............................136

Cropping Images ..........................................................................138

Copying Images and Sound Files.................................................139

Using the Digital Filters.................................................................141

Red-eye Compensation................................................................144

Adding a Frame (Frame Composite)............................................145

Editing Movies ..............................................................................147

Setting the Printing Service (DPOF)................................................149

Printing Single Images..................................................................149

Printing All Images........................................................................151

Printing Using PictBridge ................................................................152

Connecting the Camera to the Printer..........................................152

Printing Single Images..................................................................153

Printing All Images........................................................................155

Printing Using the DPOF Settings ................................................156

Disconnecting the Cable from the Printer.....................................156

Recording and Playing Back Sound 157

Recording Sound (Voice Recording Mode)....................................157

Playing Back Sound .........................................................................159

Adding a Voice Memo to Images.....................................................160

Recording a Voice Memo .............................................................160

Playing Back a Voice Memo.........................................................161

Settings 162

Camera Settings................................................................................162

Formatting an SD Memory Card or the Built-in Memory ..............162

Changing the Sound Settings .......................................................163

Changing the Date and Time........................................................165

Setting the World Time.................................................................167

Changing the Display Language ..................................................169

Changing the Image Folder Name ...............................................170

Changing the USB Connection Mode...........................................171

Changing the Video Output Format..............................................172

Adjusting the Brightness of the Display ........................................ 173

Using the Power Saving Function ................................................174

Setting Auto Power Off.................................................................175

Setting the Quick Zoom Function.................................................176

Setting the Guide Display.............................................................177

Resetting to Default Settings (Reset) ...........................................178

Changing the Start-up Screen ......................................................179

Appendix 180

List of World Time Cities..................................................................180

Default Settings.................................................................................181

Functions Available for Each Shooting Mode................................186

Optional Accessories .......................................................................188

Messages...........................................................................................189

Troubleshooting................................................................................192

Main Specifications ..........................................................................194

WARRANTY POLICY.........................................................................198

Index...................................................................................................204

In this manual, the method for operating the four-way controller is shown in illustrations, such as in the one below.

The meanings of the symbols used in this Operating Manual are explained below.

A mode

Q mode

indicates the reference page number for an explanation of the related operation.

indicates information that is useful to know.

indicates precautions to be taken when operating the camera.

This is the mode for capturing still pictures and recording movies and sound files. In this manual, the mode for taking still pictures is referred to as the “Still Picture Capture Mode”, the mode for recording movies is referred to as the “C mode” and the mode for recording sound files is referred to as the “O mode”.

This is the mode for viewing still pictures and playing back movies and sound files.

Composition of the Operating Manual

This Operating Manual contains the following chapters.

1 Getting Started –––––––––––––––––––––––––––––––––––––––––

This chapter explains what you need to do after purchasing the camera before you start taking pictures. Be sure to read it and follow the instructions.

2 Quick Start ––––––––––––––––––––––––––––––––––––––––––––

This chapter explains the simplest way to take pictures and play back images. Use it if you want to start taking pictures or playing back images straightaway.

3 Common Operations ––––––––––––––––––––––––––––––––––––

This chapter explains common operations such as the functions of the buttons and how to use the menus. For more details, refer to the respective chapters below.

4 Taking Pictures ––––––––––––––––––––––––––––––––––––––––

This chapter explains the various ways of capturing images and how to set the relevant functions.

5 Playing Back and Deleting Images–––––––––––––––––––––––––

This chapter explains how to view still pictures and movies on the camera or on a TV and how to delete images from the camera.

6 Editing and Printing Images ––––––––––––––––––––––––––––––

This chapter explains the various ways of printing still pictures and how to edit images with the camera. For information on transferring images to a PC and installing the provided software, see the supplied “PC Connection Manual”. For details on editing and printing images on a PC, see the Help section of the software.

7 Recording and Playing Back Sound –––––––––––––––––––––––

This chapter explains how to record sound files or add sound (a voice memo) to an image, and how to play back sound files.

8 Settings –––––––––––––––––––––––––––––––––––––––––––––––

This chapter explains how to set the camera-related functions.

9 Appendix––––––––––––––––––––––––––––––––––––––––––––––

This section deals with troubleshooting and lists the optional accessories.

Camera Features

In addition to basic picture-taking, the Optio modes to suit different situations. This section describes how to make the most of the key features of your camera. Together with the explanations of camera operations, it will enable you to enjoy your camera to the full.

M50

has a variety of shooting

Advanced Movie Recording and Picture Taking Functions

The Optio M50 has a shake reduction function to reduce camera shake during movie recording. (p.114)

For recording the action of sporting events as a movie

while capturing the winning shot in a picture.

Add Fun Frames to Your Pictures!

With the Optio M50, you can add a fun frame when taking a picture of a child or a pet, for example. (p.66) You can also add frames to pictures you have taken. Adjust the position of the subject in the picture or reduce or enlarge the picture size to match the frame shape and size. Now you no longer have to worry about the subject not being aligned in the frame. (p.145)

For decorating your pictures

with a frame.

Easy-to-Navigate Capture and Playback Functions!

The user-friendly design of the Optio M50 enables easy operation with only a few buttons. Simply by choosing the appropriate icon, you can select the shooting mode (p.53) and choose the optimal settings for the situation, or the playback mode (p.115, p.136) and enjoy the various playback and editing functions. A guide on the display lets you check the functions available in each mode and how to use them. (p.53, p.59)

A shooting mode guide is displayed in the Capture Mode

Palette and a playback mode guide in the Playback Mode Palette for a few seconds after each mode is selected. (p.53, p.59)

Use the Green Mode to take pictures easily using

standard settings. (p.63)

Display Images and Sound Files in Calendar Format!

With the Optio M50, you can display recorded images and sound files by date in calendar format. (p.117) This lets you quickly find the image or sound file you want to play back.

Enjoy Playback and Editing Functions Without a Computer!

The Optio M50 lets you play back and edit images without having to connect the camera to your computer and transfer the images first. The camera is all you need to take and edit still pictures and movies. (p.136) And no more worries about accidentally deleting images, because now, with the Optio M50, you can recover them again. (p.133)

Resize (p.136) , Cropping (p.138) , and Red-eye

Compensation (p.144) can be used, while the image is displayed in Playback mode.

You can divide a movie into two or select a frame from a

movie to save it as a still picture. (p.147)

Checking the Contents of the Package

Camera

Optio M50

USB cable

I-USB7 (*)

Battery charger

D-BC78 (*)

Operating Manual

(this manual)

Items marked with an asterisk (*) are also available as optional accessories. The battery charger and AC plug cord are only sold as a set (Battery Charger Kit K-BC78). For other optional accessories, refer to “Optional Accessories” (p.188).

Strap

O-ST51 (*)

AV cable

I-AVC7 (*)

AC plug cord (*) PC Connection Manual

Quick Guide

Software (CD-ROM)

S-SW77

Rechargeable lithium-ion

battery D-LI78(*)

Names of Parts

Front

Back

Self timer lamp Flash

Lens

Microphone

Tripod socket

Speaker

Battery/Card cover

Display Power switch Shutter release button

PC/AV terminal Terminal cover

Names of Operating Parts

Power switch Shutter release button

I button

Zoom/w/x/f/y button

Q button

Four-way controller

4/W button

Green/i button

3 button

Refer to “Understanding the Button Functions” (p.44 - p.47) for an explanation of the function of each button.

Monitor Indications

1 4 :2 5

+ 1 .0

3 8

0 2 /0 2 / 2 0 0 8

F 3 .5

1 / 25 0

Normal Display in Still Picture Capture Mode

The display shows information such as the shooting conditions.

1 2

3 4

7 8

16 17

1/250

1/250 F3.5

F3.5

+1.0

02/02/2008

14:25

14:25+1.0

14 15

Shooting mode (p.53)

Face Priority icon (p.56)

Flash mode (p.89)

Drive mode (p.76, p.77)

Camera shake warning (p.85)

Focus mode (p.87)

Digital zoom icon (p.78)

Intelligent zoom icon (p.78) Memory status (p.34)

+ : Built-in memory

(without card)

a : SD Memory Card r : Card is write-protected

* 16 and 17 appear only when the shutter release button is pressed

halfway.

* Some indications may not appear depending on the shooting mode.

Remaining image storage

capacity Battery level indicator (p.25)

Focus frame (p.40)

EV compensation (p.84)

Date and time (p.38)

World time setting (p.167)

Date Imprint icon (p.105)

Shutter speed

Aperture

Histogram + Info Display in Still Picture Capture Mode

F 3 .5

1 / 25 0

3 8

200

+ 1 .0

6 7

3 4

1/250

1/250 F3.5

F3.5

+1.0

200

8 9

Bright portion (blinks red)

Dark portion (blinks yellow)

Shutter speed

Aperture

Recorded pixels (p.91)

Quality (p.93)

White balance (p.94)

AE Metering (p.96)

Sensitivity (p.98)

Histogram (p.86)

* 3 and 4 appear only when the shutter release button is pressed

halfway.

* Some indications may not appear depending on the shooting mode.

About the Bright and Dark Portions

When there is an area in the frame that is so bright it appears white, the indicated area blinks red as a warning. Similarly, when there is an area that is so dark it appears black, the indicated area blinks yellow as a warning.

Full Display in Still Picture Playback Mode

F 3 .5

1 / 25 0

1 0 0

0 0 38

1 4 :2 5

200

0 2 /0 2 / 2 0 0 8

(All of the display items are displayed here for explanatory purposes.)

The display shows information such as the shooting conditions. A1 to A12 appear when [Normal Display] or [Histogram + Info] is selected. B1 to B10 only appear when [Histogram + Info] is selected. (p.121)

A2 A3

A4 A5

A6 A7 A8

B10

A9 A10

1 B1 B2

B3 B4 B5 B6 B7

1/250

F3.5

Playback mode (p.59)

w : Still Picture Playback

Mode (p.59)

P : Digital SR (p.122) Folder number (p.170)

File number

Protect icon (p.134)

Voice memo icon (p.161)

Battery level indicator (p.25)

Volume icon (p.161)

Memory status (p.34)

: Built-in memory (without card)

a : SD Memory Card r : Card is write-protected

200

A11A12

0038

100

100-0038

02/02/2008

14:25

Captured date and time (p.38)

Four-way controller guide

A10

Key lock icon (p.64)

A11

Face Priority icon (p.56)

A12

Bright portion (blinks red)

Recorded pixels (p.91)

Quality (p.93)

White balance (p.94)

AE Metering (p.96)

Sensitivity (p.98)

Dark portion (blinks yellow) (p.19)

Shutter speed

Aperture

Histogram (p.86)

B10

In Normal Display, A6 and A9 disappear if no operation is performed for two seconds.

Guide Indications

A guide to available button operations appears on the display during operation. The buttons are indicated as shown below.

Four-way controller (2) 2 Zoom button Four-way controller (3) 3 Four-way controller (4) 4 Shutter release button Four-way controller (5) 5 3 button

4/W button

Green/i button X, i I button I,

(p.19)

SHUTTER

Getting Started

Attaching the Strap

Attach the strap (O-ST51) supplied with the camera.

1 Pass the narrow end of the strap through the strap lug. 2 Pass the other end of the strap through the loop and

pull tight.

Getting Started

Powering the Camera

Getting Started

Battery

Charging indicator While charging: Lights Charging finished: Turns off

Battery charger

AC plug cord

To power outlet

Charging the Battery

Use the battery charger to charge the battery before using it in the camera for the first time or after a long period of non-use, or when the [Battery depleted] message appears. Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125 V, 7A, minimum 6ft (1.8m)”

1 Connect the AC plug cord to the battery charger D-BC78. 2 Plug the AC plug cord into the power outlet. 3 Place the battery in the charger so that the PENTAX

logo is facing up.

The charging indicator lights while the battery is charging and turns off when charging is finished.

4 Remove the battery from the battery charger when

charging is finished.

•

The time required to fully charge the battery is about 150 minutes (max.). The appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F to 104°F). (The charging time may vary depending on the ambient temperature and charging conditions.)

•

The battery has reached the end of its service life when it starts to run down soon after being charged. Replace with a new battery.

•

Do not use the battery charger to charge batteries other than the rechargeable lithium-ion battery D-LI78, as the charger may overheat or be damaged.

•

If the battery is inserted correctly but the charging indicator fails to light, the battery may be faulty. Replace with a new battery.

Battery/Card

Battery/card cover lock lever

Battery

cover

Installing the Battery

Use the battery that is provided with the camera. Charge the battery before using it in the camera for the first time.

Open the battery/card cover.

Move the battery/card cover lock lever to the OPEN position 1 and open the battery/card cover 2.

Using the side of the battery to press the battery/card cover lock lever in the direction of with the PENTAX logo pointing toward the lens.

Push the battery in until it is locked in place.

Make sure that the battery is inserted with the PENTAX logo pointing toward the lens. If the battery is incorrectly oriented, malfunction may result.

, insert the battery

Getting Started

Close the battery/card cover.

Close the battery/card cover and move the battery/card cover lock lever to the LOCK position.

Removing the Battery

Open the battery/card cover.

Press the battery/card cover lock lever in the direction of

Getting Started

to release the battery.

The battery will be ejected. Pull the battery out of the camera.

• This camera uses a rechargeable lithium-ion battery D-LI78. Use of any other type of battery may damage the camera and cause malfunction.

• Insert the battery correctly. If the battery is incorrectly oriented, malfunction may result.

• Do not remove the battery while the camera is turned on.

• When storing the battery for more than 6 months, charge the battery for 30 minutes using the battery charger and store the battery separately. Be sure to recharge the battery every 6 to 12 months. Storing the battery below room temperature is ideal. Avoid storing it in high temperatures.

• The date and time may be returned to the default setting if the camera is left without the battery for a long time.

• Be careful as the camera or the battery may become hot when the camera is used continuously for a long period of time.

• Image Storage Capacity, Movie Recording Time, Sound Recording Time, and Playback Time

(at 23°C with the display on and the battery fully charged)

Image Storage

(flash used for 50%

Approx. 210

Capacity

of shots)

pictures

Movie Recording

Approx. 70 min. Approx. 300 min. Approx. 240 min.

Time

Sound Recording

Time

Playback Time

*1: Recording capacity shows approximate number of shots recorded during

CIPA-compliant testing (with display on, flash used for 50% of the shots, and 23 degrees centigrade). Actual performance may vary according to operating conditions.

*2: According to the result of in-house testing.

• In general, battery performance may temporarily deteriorate as the temperature decreases.

• Be sure to take a spare battery with you when traveling abroad or to a cold region, or if you intend to take a lot of pictures.

• Battery Level Indicator

You can check the battery level by the indicator on the display.

Screen Display Battery Status

(green) Adequate power remains.

(green) Battery is running low.

(yellow) Battery is running very low.

(red) Battery is exhausted.

[Battery depleted] The camera will turn off after this message appears.

Getting Started

AC plug cord

AC adapter

DC coupler

DC terminal

Using the AC Adapter

Use of the AC adapter kit K-AC78 (optional) is recommended if you intend to use the camera for a long time or connect it to a PC.

1 Make sure that the camera is turned off and open the

battery/card cover.

2 Remove the Battery.

Refer to p.24 on how to open/close the battery/card cover and remove the battery.

3 Insert the DC coupler.

Using the side of the DC coupler to press the battery/card cover lock lever, insert the DC coupler. Confirm the DC coupler is locked in place.

4 Extract the DC coupler cord.

Pull out the tab at the joint of the camera and the battery/card cover so that the DC coupler cord extracts from there.

5 Close the battery/card cover. 6 Connect the DC terminal of the AC adapter to the DC

terminal of the DC coupler.

7 Connect the AC plug cord to the AC adapter. 8 Plug the AC plug cord into the power outlet.

• Make sure that the camera is turned off before connecting or disconnecting the AC adapter.

• Make sure that the AC plug cord and the power cord connecting the AC adapter to the camera are inserted securely. The data may be lost if either becomes disconnected while data is being recorded on the SD Memory Card or the built-in memory.

• Use the AC adapter with due care to avoid fire or electric shock. Be sure to read “USING YOUR CAMERA SAFELY” (p.1) and “About the Battery Charger and the AC Adapter” (p.2) before using the AC adapter.

• Be sure to read the operation manual accompanying the AC adapter kit K-AC78 before using the adapter.

• The battery cannot be charged inside the camera even when the AC adapter is connected.

• When connecting the AC adapter, you cannot set the camera upright on the table because the cord from the DC coupler is extracted from the bottom side of the camera. Additionally, do not place the camera with the lens facing down because the lens extends when the camera turns on. When connecting the AC adapter and confirm the display for playing back pictures or setting the camera, hold the camera in your hand or use a tripod.

Getting Started

Installing the SD Memory Card

Getting Started

Battery/Card cover

SD Memory Card socket

SD Memory Card

This camera uses an SD Memory Card. Captured images and sound files are saved on the SD Memory Card if a card is inserted in the camera. They are saved in the built-in memory if a card is not inserted. (p.34)

• Be sure to use this camera to format (initialize) an SD Memory Card that is unused or has been used on other cameras or digital devices. Refer to “Formatting an SD Memory Card or the Built-in Memory” (p.162) for instructions on formatting.

• Make sure that the camera is turned off before inserting or removing the SD Memory Card.

• The still picture storage capacity varies depending on the capacity of the SD Memory Card and the selected number of recorded pixels and quality level. (p.31)

• The self-timer lamp blinks while the SD Memory Card is being accessed (data is being recorded or read).

Backing Up Data

The camera may not be able to access data in the built-in memory in the case of a malfunction. Use a computer or other device to back up important data in another location.

1 Open the battery/card cover.

Move the battery/card cover lock lever to the OPEN position 1 and open the battery/card cover 2.

2 Insert the SD Memory Card into the SD Memory Card

socket so that the label is facing toward the front of the camera (the side with the lens).

Push the card in all the way. Images and sound may not be recorded correctly if the card is not inserted all the way.

3 Close the battery/card cover.

Close the battery/card cover and move the battery/card cover lock lever to the LOCK position.

Removing the SD Memory Card

1 Open the battery/card cover. 2 Push the card into the SD Memory Card socket to eject

it.

Pull the card out.

Getting Started

Precautions When Using an SD Memory Card

• The SD Memory Card is equipped with a write-protect switch. Setting the switch to LOCK protects the existing data by

prohibiting recording of new data, deletion

Getting Started

of existing data or formatting of the card. r appears on the display when the card is write-protected.

• Care should be taken when removing the SD Memory Card immediately after using the camera, as the card may be hot.

• Do not remove the SD Memory Card or turn the camera off while data is being saved to the card, images or sound files are being played back, or the camera is connected to a computer with the USB cable, as this may cause the data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperature.

•

Do not remove the SD Memory Card during formatting as this may damage the card and render it unusable.

• The data on the SD Memory Card may be deleted in the following circumstances. PENTAX does not accept any liability for data that is deleted (1) when the SD Memory Card is mishandled by the user. (2) when the SD Memory Card is exposed to static electricity or electrical

interference. (3) when the card has not been used for a long time. (4) when the card is ejected or the battery is removed while the data on the

card is being recorded or accessed.

• If it is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.

• Avoid using or storing the card where it may be exposed to static electricity or electrical interference.

• Avoid using or storing the card in direct sunlight or where it may be exposed to rapid changes in temperature or to condensation.

• When using an SD Memory Card with a slow recording speed, recording may stop while you are taking movies even when there is adequate space in the memory, or shooting and playback may take a long time.

• For information on compatible SD Memory Cards, visit the PENTAX website.

• Be sure to format an SD Memory Card that is unused or has been used on another camera. Refer to “Formatting an SD Memory Card or the Built-in Memory”. (p.162) Please note that formatting the SD Memory Card will not necessarily delete the

• data so that it cannot be recovered using off-the-shelf data recovery software. There are off-the-shelf secure data deletion software programs available that will completely delete the data. If you are going to discard, give away or sell your SD Memory Card, you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information. In any case, the data on your SD Memory Card should be managed at your own risk.

Write-protect

switch

Recorded Pixels and Quality Level of Still Pictures

Choose the number of pixels (size) and quality level (data compression rate) of still pictures according to how you intend to use the pictures you have taken. Higher quality levels and numbers of pixels produce clearer images, but the resulting increase in data volume reduces the total number of pictures that can be taken (stored in the camera’s built-in memory or on the SD Memory Card). The quality of the captured photo or printed picture also depends on the quality level, exposure compensation, resolution of the printer and a variety of other factors, so you do not need to select more than the required number of pixels. As a rough guide, i (1600×1200) is adequate for making postcard-size prints. Refer to the table below for the appropriate settings according to use.

Appropriate Number of Recorded Pixels According to Use

Recorded Pixels Use

E 3264×2448

f 2592×1944 g 2304×1728 h 2048×1536 i 1600×1200 l 1024× 768 m 640× 480

The default setting is E (3264×2448).

Appropriate Quality Level According to Use

The default setting is D (Better).

Best Lowest compression rate. Suitable for photo prints.

Better

Good

For printing high quality photos or A4-size pictures, or editing images on a PC.

For making postcard-size prints.

Clearer

For posting on a website or attaching to e-mail.

Standard compression rate. Suitable for viewing the image on a computer screen.

Highest compression rate. Suitable for posting on a website or attaching to e-mail.

Getting Started

Choose the appropriate number of recorded pixels and quality level for still pictures on the [A Rec.Mode] menu.

Selecting the Recorded Pixels 1p.91

Selecting the Quality Level 1p.93

Getting Started

Recorded Pixels, Quality Level and Image Storage Capacity

(Approximate numbers of pictures)

(Best)

Built-in

Memory

E 3264×2448

f 2592×1944 g 2304×1728 h 2048×1536 i 1600×1200 l 1024× 768 m 640× 480

• The above figures may vary depending on the subject, shooting conditions, shooting mode and SD Memory Card, etc.

13 pictures 121 pictures 25 pictures 232 pictures 38 pictures 351 pictures

20 pictures 188 pictures 38 pictures 355 pictures 54 pictures 503 pictures

25 pictures 236 pictures 49 pictures 457 pictures 69 pictures 643 pictures

31 pictures 293 pictures 61 pictures 570 pictures 88 pictures 816 pictures

51 pictures 472 pictures 83 pictures 774 pictures 121 pictures 1119 pictures

96 pictures 888 pictures 155 pictures 1439 pictures 192 pictures 1777 pictures

192 pictures 1777 pictures 297 pictures 2747 pictures 363 pictures 3358 pictures

512 MB

D (Better) E (Good)

Built-in

Memory

512 MB

Built-in

Memory

Recorded Pixels, Quality Level and Frame Rate of Movies

Choose the recorded pixels, quality level and frame rate (number of frames per second) according to how you intend to use the movies you have taken. The higher the number of recorded pixels and quality level, the clearer the details, but the bigger the file size. The more frames per second, the better the quality of the movie, but the bigger the file size. Choose the appropriate number of recorded pixels, quality level and frame rate in [Movie] on the [A Rec.Mode] menu.

Selecting the Recorded Pixels for Movies 1p.110

512 MB

Selecting the Quality Level of Movies 1p.111

Selecting the Frame Rate 1p.112

Appropriate Number of Recorded Pixels According to Use

(640×480)

(320×240)

The default setting is m (640×480).

Suitable for viewing on a TV or computer screen.

Suitable for posting on a website or attaching to e-mail.

Appropriate Quality Level According to Use

The default setting is C (Best).

Best Clearer images

Better

Good Grainier images

Appropriate Frame Rate According to Use

30fps

15fps

The default setting is 30fps (frames per second).

Produces high quality movies, but reduces the total recording time.

Increases the total recording time because the file size is smaller.

Recorded Pixels, Quality Level, Frame Rate and Recording Time

(Approximate recording time)

30fps 15fps

Built-in

Memory

C 48 sec.

640×480

320×240

•

The above figures are based on PENTAX standard shooting conditions and may vary

1 min. 5 sec.

1 min.

39 sec.

1 min.

17 sec.

1 min.

45 sec.

2 min.

28 sec.

512 MB

7 min.

31 sec.

10 min.

4 sec.

15 min. 15 sec.

11 min. 59 sec.

16 min. 14 sec.

22 min. 53 sec.

Built-in

Memory

1 min.

36 sec.

2 min.

10 sec.

3 min.

12 sec.

2 min.

28 sec.

3 min.

24 sec.

4 min.

57 sec.

512 MB

14 min. 48 sec.

20 min.

8 sec.

29 min. 37 sec.

22 min. 53 sec.

31 min. 28 sec.

45 min. 47 sec.

depending on the subject, shooting conditions and type of SD Memory Card used.

•

Recording can continue until the built-in memory/SD Memory Card is full, or the size of the recorded movie reaches 2 GB (when using an SDHC card). If recording stops at 2 GB, start recording again to continue to record the rest of the movie in blocks of 2 GB.

Built-in

Memory

41 min. 17 sec.

Sound

512 MB

6 hr.

14 min.

15 sec.

Getting Started

Turning the Camera On and Off

3 8

1 4 : 25

0 2 / 02/2008

Getting Started

Press the power switch.

The camera turns on and the display turns on. When you turn the camera on, the lens cover opens and the lens extends. If the Language Selection screen or Date Adjust screen appears when you turn the camera on, follow the procedure on p.36 to set the display language and/or current date and time.

2 Press the power switch again.

The display turns off, the lens closes, and the camera turns off.

Taking Pictures 1p.61

Checking the Memory Card

The memory card is checked automatically when the camera turns on. + appears on the display when there is no SD Memory Card inserted in the camera. In this case, images and sound files will be saved in the built-in memory. r appears instead of a when the write-protect switch on the SD Memory Card is in the locked position. Images and sound cannot be recorded when the write-protect switch is locked.

Power switch

Memory status

02/02/2008

14:25

Q button

Playback Mode

Use this mode when you want to play back an image or sound file straightaway without taking any more pictures.

1 Press the power switch while holding down the Q

button.

The display turns on with the lens retracted and the camera turns on in Playback Mode.

To switch from Playback Mode to A mode, press the Q button or press the shutter release button halfway.

Playing Back Still Pictures 1p.42

Getting Started

Initial Settings

Set the language, time, and date after purchasing the camera before you start taking pictures.

Getting Started

Four-way controller

4 button

3 button

The [Language/ ] screen appears when the camera is turned on for the first time. Perform the operations in “Setting the Display Language” below to set the language, and in “Setting the Date and Time” (p.38) to set the current date and time.

Language, Date, and Time can be changed later. Refer to the pages below for instructions.

• To change the language, follow the steps in “Changing the Display

Language” (1p.169).

• To change the date and time, follow the steps in “Changing the Date

and Time” (1p.165).

Setting the Display Language

1 Use the four-way controller

(2345) to choose the display language.

English

Dansk Svenska

Deutsch

Suomi Polski

Italiano

Magyar

Nederlands

Cancel

2 Press the 4 button.

OFF

The Initial Setting screen appears in the selected language. If the desired settings for [Hometown] and daylight saving time appear, press the 4 button again to display the [Date Adjust] screen. Go to “Setting the Date and Time” (p.38). Go to Step 3 in “Setting Hometown and DST” if the desired settings do not appear.

If you accidentally select another language and go to the next procedure, perform the following operation to set the language back.

When Another Language Has Been Inadvertently Selected

Initial Setting

English

Hometown New York

Cancel

Daylight saving time

DST

OFF

1 Press the four-way controller (5). 2 Use the four-way controller (2345) to select the

language and press the 4 button.

The Initial Setting screen appears in the selected language.

When the Screen After Step 2 Appears in Another Language

1 Press the 4 button. 2 Press the 3 button. 3 Press the four-way controller (5). 4 Use the four-way controller (32) to select [Language/

5 Press the four-way controller (5).

The [Language/ ] screen appears.

6 Use the four-way controller (2345) to select the

language.

7 Press the 4 button.

The [W Setting] menu appears in the selected language.

Getting Started

The language is now switched to your desired language. To reset Hometown and the Date and Time, refer to the pages below for instructions.

• To change Hometown, follow the steps in “Setting the World Time” (p.167).

• To change the Date and Time, follow the steps in “Changing the Date and Time” (p.165).

Setting Hometown and DST

OFF

3 Press the four-way controller (3).

Getting Started

The frame moves to [Hometown].

4 Press the four-way controller (5).

The Hometown screen appears.

5 Use the four-way controller (45)

to choose the city.

Initial Setting

Hometown New York

Cancel

6 Press the four-way controller (3).

The frame moves to [DST] (Daylight Saving Time).

7 Use the four-way controller (45) to select O (On) or

P (Off).

8 Press the 4 button.

The Initial Setting screen appears.

9 Press the 4 button.

The Date Adjust screen appears. Next, set the date and time.

Setting the Date and Time

Set the current date and time and the display style.

1 Press the four-way controller (5).

The frame moves to [mm/dd/yy].

2 Use the four-way controller (23)

to choose the date and time display style.

3 Press the four-way controller (5).

The frame moves to [24h].

4 Use the four-way controller (23)

to select [24h] (24-hour display) or [12h] (12-hour display).

5 Press the four-way controller (5).

The frame returns to [Date Style].

Date Adjust

Date Style

Date

Time

Cancel

Date Adjust

Date Style

Date

Time

Cancel

English

DST

OFF

24h

dd yy

01/01/2008

0:00

dd y y

24h

01/01/2008

0:00

6 Press the four-way controller (3).

The frame moves to [Date].

Date Adjust

Date Style

Date

Time

Cancel

24h

01/01/2008

0:00

Getting Started

7 Press the four-way controller (5).

The frame moves to the month.

8 Use the four-way controller (23)

to change the month.

Change the day and year in the same manner. Next, change the time.

Date Adjust

Date Style

Date

Time

Cancel

If you selected [12h] in Step 4, the setting switches between am and pm corresponding to the time.

9 Press the 4 button.

The setting is set and the camera returns to capture status.

Language, Date, Time, Hometown, and DST can be changed. Refer to the pages below for instructions.

• To change the language, follow the steps in “Changing the Display

Language” (1p.169).

• To change the date and time, follow the steps in “Changing the Date

and Time” (1p.165).

• To change the city or turn DST on and off, follow the steps in “Setting

the World Time” (1p.167).

When the Initial Setting or Date Adjust screen is displayed, you can cancel the setting operation and switch to Capture mode by pressing the 3 button. In this case, the Initial Setting screen will appear next time you turn the camera on.

If you press the 4 button in Step 9, the camera clock is reset to 00

seconds. To set the exact time, press the signal (on the TV, radio, etc.) reaches 00 seconds.

button when the time

24h

01/01/2008

0:00

The video output format (NTSC/PAL) is set to the format of the city selected in [Hometown] on the Initial Setting screen. Refer to “List of World Time Cities” (p.180) for the video output format of each city set as the Initial Setting, and “Changing the Video Output Format” (p.172) for changing the setting of the video output format.

Quick Start

1 4 : 25

3 8

0 2 / 02/2008

Taking Still Pictures

Shutter release button

Zoom/w/x button

Quick Start

The standard procedure for taking still pictures is described below. The flash fires automatically depending on the light conditions.

1 Press the power switch.

The camera turns on and is ready to take still pictures. In this manual, this is called Still Picture Capture mode.

2 Confirm the subject and shooting

information on the display.

The focus frame in the middle of the display indicates the zone of automatic focusing. You can change the captured area by pressing the Zoom/w/x button to the left or right.

x : enlarges the subject w : widens the area that is captured by the camera

Focus frame

3 Press the shutter release button halfway.

The focus frame on the display turns green if the subject is in focus.

4 Press the shutter release button fully.

The picture is taken. The image appears on the display for one second (Instant Review) and is saved to the SD Memory Card or built-in memory. (p.41)

02/02/2008

14:25

Press the Green button to switch to the 9 (Green) mode and let the camera set all the shooting functions automatically. Selecting the mode is the easiest way to ensure that pictures come out well. (p.63)

Using the Shutter Release Button

The shutter release button works in a two-step action as follows.

Press halfway

The focus and exposure are locked when the shutter release button is pressed halfway. The green focus frame lights on the display when the shutter release button is pressed halfway and the subject is in focus. If the subject is out of focus, the frame turns red.

Press fully

Press the shutter release button all the way down to take the picture.

[Poor focusing conditions] The camera may not be able to focus under the following conditions. In

these cases, lock the focus on an object the same distance away as the subject (by pressing and holding the shutter release button halfway), then aim the camera at your subject and press the shutter release button fully.

• Objects that lack contrast such as a blue sky or white wall

• Dark places or objects, or conditions that prevent light being reflected back

• Horizontal lines or intricate patterns

• Fast moving objects

• When there is an object in the foreground and an object in the background in the same picture

• Strongly reflected light or strong backlighting (bright background)

Instant Review

The image appears on the display for one second (Instant Review) immediately after it is captured. You can change the Instant Review time. (p.101) You can delete the image during Instant Review by pressing the

• When the camera detects that the subject blinked, the message “Closed eyes have been detected.” appears during Instant Review (This function is called “Blinking Detection”). While the message appears, press the Green button and choose [Delete] from the menu to delete the taken image.

• Even when Instant Review is set shorter than [3sec], the message appears for 3 seconds.

• When the Face Recognition function does not work, “Blinking Detection” also does not function. Even if the subject’s faces are recognized, “Blinking Detection” does not function when the recognized faces are too small.

i button.

Quick Start

Playing Back Still Pictures

1 4 : 25

1 0 0

0 0 3 8

0 2 / 02/2008

Quick Start

Playing Back Images

Press the Q button after taking a

picture.

The image appears on the display. In this manual, this is called Q mode (Playback mode). Displaying one image in full in Q mode (Q mode default setting) is called single-image display. Press the Q button again in Q mode or press the shutter release button halfway to switch to A mode.

Quick Start

Shutter release button

Q button

Four-way controller

File number

100

100-0038

0038

02/02/2008

14:25

Playing Back the Previous or Next Image

1 Press the Q button after taking a picture.

The image appears on the display.

2 Press the four-way controller (45).

The previous or next image appears.

Rotating the Displayed Image

Can ce l

1 0 0

0 0 1 7

O K

All Images/Sounds

1 Press the Q button after taking a picture.

The image appears on the display.

2 Press the four-way controller (3).

The Playback Mode Palette appears.

Use the four-way controller (

) to select s (Image Rotation) and

press the

button.

234

The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.

4 Use the four-way controller

(2345) to choose the rotation direction and press the 4 button.

The rotated image appears.

• Movies cannot be rotated.

• Protected images can be rotated, but they cannot be saved in a rotated state.

Deleting the Displayed Image

Press the i button while the image is displayed to display the Delete screen. Use the four-way controller (2) to select [Delete] and press the 4 button. (p.128)

Q button

Four-way controller 4 button

i button

Cancel

Cancel OK

Delete

Cancel

All Images/Sounds

100

100-0017

0017

Quick Start

Common Operations

Understanding the Button Functions

1 2

3 4

Common Operations

A Mode

1 Power switch

Turns the camera on and off. (p.34)

2 Shutter release button

Focuses the camera on the subject when pressed halfway in Still Picture Capture mode. (Except in 3, s and \ modes) (p.40) Takes the still picture when pressed down fully. (p.40) Starts and stops movie recording in C mode. (p.108) Starts and stops sound file recording in O mode. (p.157)

3 I button

Switches the Face Recognition function (p.56). The Face Recognition function is switched as follows each time the Smile Capture On

4 Zoom/w/xbutton

Changes the captured area. (p.78)

5 Q button

Switches to the Q mode. (p.115)

button is pressed:

Face Priority Off ´ Face Priority On

6 Four-way controller

(2) : Changes the drive mode. (p.76, p.77) (3) : Displays the Capture Mode Palette. (p.53) (4) : Changes the flash mode. (p.89) (5) : Changes the focus mode. (p.87) (23):Adjusts \ in \ mode. (p.88)

7 4/W button

Changes the information on the display. (p.85)

8 Green button

Switches to the 9 (Green) mode. (p.63) Calls up the assigned menu. (p.57)

9 3 button

Displays the [A Rec.Mode] menu. (p.48)

Common Operations

1 2

3 4

Common Operations

Q Mode

1 Power switch

Turns the camera on and off. (p.34)

2 Shutter release button

Switches to A mode. (p.115)

3 I button

Zooms up on the subject’s faces in the face-recognized image in order of the recognition during shooting. (Face close-up playback)

4 Zoom/f/y button

Press f during single-image display to change to nine-Image display. Returns to the previous display when Enlarges the image when Returns to the previous display when Press

during nine-image display to change to folder or calendar display. (p.117) Press y during folder display to change to nine-image display of the selected folder. (p.117) Press y during calendar display to change to nine-image display for the selected date. (p.117) Adjusts the volume during playback of movies or sound files. (p.125, p.159)

is pressed. (p.116)

is pressed during single-image display.

is pressed. (p.118)

5 Q button

Switches to A mode. (p.115)

6 Four-way controller

(2) : Plays back and pauses a movie or sound file. (p.125, p.159) (3) : Displays the Playback Mode Palette. (p.60)

(

) : Displays the previous or next image and sound file during

(

2345

Stops a movie or sound file during playback. (p.125, p.159)

single-image display. (p.42) Frame forwards, frame reverses, reverses a movie and makes a movie play forwards during playback. (p.125) Fast forwards, reverses, and moves to the next index in sound file playback. (p.159)

) : Moves the display area during zoom display. (p.118)

Selects an image in nine-image display, a folder in folder display, and a date in calendar display. (p.116, p.117) Moves the image when using the Frame Composite function. (p.145)

7 4/W button

Changes the information on the display. (p.121) Returns zoom display or nine-image display to single-image display. (p.116, p.118) Changes to nine-image display of the selected folder during folder display. (p.117) Changes to single-image display of the selected date during calendar display. (p.117)

8 Green/i button

Switches from single-image display to the Delete screen. (p.128) Switches from nine-image display to the Select & Delete screen. (p.130) Switches from folder display to the calendar display screen. (p.117) Switches from calendar display to the folder display screen. (p.117)

9 3 button

Displays the [W Setting] menu during single-image display. (p.48) Returns to single-image display during Playback Mode Palette display. (p.59) Returns zoom display or nine-image display to single-image display. (p.116) Changes to nine-image display of the selected folder during folder display. (p.117) Changes to nine-image display of the selected date during calendar display. (p.117)

Common Operations

Setting the Camera Functions

02 /0 2/ 200 8

14 :2 5

02 /0 2/ 200 8

14 :2 5

10 0

00 38

02 /0 2/ 200 8

14 :2 5

02 /0 2/ 200 8

14 :2 5

10 0

00 38

To change the camera settings, press the Rec.Mode] menu or [

Setting] menu. Menus for playing back and editing

button to display the [A

images and sound files are displayed from the Playback Mode Palette.

Setting with the Menus

Press the 3 button in A mode to display the [A Rec.Mode] menu. Press the 3 button in Q mode to display the [W Setting] menu.

Common Operations

Press halfway

During recording During playback

383838

SHUTTER

Rec.Mode

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Exit

Rec.Mode

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Exit

02/02/2008

14:25

1/3

AWB

Auto

1/3

AWB

Auto

Setting

Format Sound Date Adjust World Time

Folder Name

Exit

Setting

Format Sound Date Adjust World Time

Folder Name

Exit

100

100-0038

0038

02/02/2008

14:25

1/3

02/02/2008

Date

1/3

02/02/2008

Date

The setting is complete and the camera returns to mode

383838

02/02/2008

14:25

100

100-0038

0038

02/02/2008

14:25

The setting is complete and the camera returns to

mode

A guide to available button operations appears on the display during menu operation.

Ex.) To set the [Quality Level] on the [A Rec.Mode] menu

1 Press the 3 button in A

mode.

The [A Rec.Mode] menu appears.

2 Press the four-way controller (3).

The frame moves to [Recorded Pixels].

3 Press the four-way controller (3).

The frame moves to [Quality Level].

Rec.Mode

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Exit

Rec.Mode

Recorded Pixels

Quality Level White Balance Focusing Area AE Metering Sensitivity

Exit

1/3

AWB

Auto

1/3

AWB

Auto

Common Operations

4 Press the four-way controller (5).

A pull-down menu appears with the items that can be selected. The pull-down menu displays only those items that can be selected with the current camera settings.

Storage Capacity

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Cancel

5 Use the four-way controller (23)

to change the setting.

The quality level changes each time the four-way controller (23) is pressed.

Refer to the following page for instructions on saving settings and canceling changes.

Auto

To Save the Setting and Start Taking Pictures

6 Press the shutter release button halfway.

The setting is saved and the camera returns to capture status. When the shutter release button is pressed fully, the picture is taken.

When the [W Setting] menu is displayed from Q mode, you can switch to A mode by pressing the Q button.

To Save the Setting and Begin Playback of Images

6 Press the Q button.

Common Operations

When the [A Rec.Mode] menu is displayed from A mode, the setting is saved and the camera returns to playback status.

To Save the Setting and Continue with Menu Operations

6 Press the 4 button or the four-way controller (4).

The setting is saved and the screen returns to Step 3.

To Cancel the Changes and Continue with Menu Operations

6 Press the 3 button.

The changes are canceled and the screen returns to Step 3.

The 3 button function differs depending on the screen. Refer to the guide indications.

Exit : Exits the menu and returns to the original screen.

Cancel : Cancels the current selection, exits the menu and

: Returns to the previous screen with the current

setting.

returns to the previous screen.

Menu List

This displays the items that can be set with the menus and provides descriptions of each item. See the list of default settings in the Appendix “Default Settings” (p.181) to decide whether you want the settings saved when the camera is turned off and whether you want the settings returned to the defaults when the camera is reset.

[A Rec.Mode] Menu

This menu shows the functions related to taking still pictures and recording movies.

Item Description Page

Recorded Pixels

Quality Level For choosing the quality level of still pictures p.93

White Balance

Focusing Area For changing the area of the autofocus p.100

AE Metering

Sensitivity For setting the sensitivity p.98 EV Compensation For adjusting the overall brightness of the picture p.84

Recorded Pixels Quality Level For choosing the quality level of movies p.111

Frame Rate

Movie

Color Mode For choosing a color mode for movies p.113

Movie SR

Digital Wide For choosing whether to use the Digital Wide function. p.83 Digital Zoom For choosing whether to use the digital zoom function p.80 Instant Review For setting the Instant Review time p.101

Memory

Green Button

Sharpness For choosing sharp or soft outlines p.102 Saturation For setting the color saturation p.103 Contrast For setting the image contrast level p.104

Date Imprint

For choosing the number of recorded pixels of still pictures

For adjusting the color balance according to the lighting conditions

For setting the area of the screen that is metered to determine the exposure

For choosing the number of recorded pixels of movies p.110

For setting the frame rate (number of frames per second)

For choosing whether to use the movie shake reduction function

For choosing whether to save the set values of the shooting function or return to the defaults when the camera is turned off

For assigning a function to the Green button in Capture mode

For choosing whether to imprint the date when taking still pictures

p.91

p.94

p.96

p.112

p.114

p.106

p.58

p.105

Common Operations

• Use the 9 (Green) mode to enjoy easy picture-taking using standard settings, regardless of the settings in the [A Rec.Mode] menu. (p.63)

• Assigning frequently used functions to the Green button enables you to go straight to the menu item. (p.57)

[W Setting] Menu

Item Description Page

Format For formatting the SD Memory Card or built-in memory p.162

Sound

Common Operations

Date Adjust For adjusting the date, time, and date style p.165

World Time For setting the world time p.167

Language/

Folder Name

USB Connection For setting the USB cable connection (to PC or printer) p.171

Video Out For setting the output format to the AV equipment p.172

Brightness Level For changing the brightness of the display p.173

Power Saving

Auto Power Off

Quick Zoom

Guide Display

Reset

For adjusting the operation volume and playback volume, and setting the start-up sound, shutter sound, key operation sound and self-timer sound

For setting the language in which menus and messages appear

For choosing how names are assigned to folders for storing images and sound files

For setting the time until the camera enters powersaving mode

For setting the time until the camera turns off automatically

For choosing whether to use the Quick Zoom function (p.118) when playing back images

For displaying a guide for the function selectable in the Capture Mode Palette and the Playback Mode Palette

For returning settings other than the date and time, language, world time and video out to their defaults

p.163

p.169

p.170

p.174

p.175

p.176

p.177

p.178

Four-way controller

Can ce l

Lan ds cap e

3 8

1 4 : 25

0 2 / 02/2008

4 button

Setting the Shooting Mode

The Optio M50 has a variety of shooting modes that let you take pictures or record movies and sound in different situations simply by choosing the right mode for the particular situation from the Capture Mode Palette.

1 Press the four-way controller (3) in A mode.

The Capture Mode Palette appears.

2 Use the four-way controller

(2345) to choose a shooting mode.

A shooting mode guide appears about 2 seconds after the shooting mode is chosen. You can turn off the shooting mode guide by operating the menu. Refer to “Setting the Guide Display” (p.177) for details of how to operate the menu.

3 Press the 4 button.

The shooting mode is selected and the camera returns to capture status.

Landscape

Cancel

OKOKOK

02/02/2008

14:25

Common Operations

• In shooting modes other than R, A, C, O, 4 and F, saturation, contrast, sharpness, white balance, etc. are automatically set to the optimal settings for the selected mode. Some functions may not be available or may not function fully

• depending on the selected shooting mode. For details, refer to “Functions Available for Each Shooting Mode” (p.186).

•

You can turn off the shooting mode guide on the Capture Mode Palette. (p.177)

There are 17 available shooting modes.

Common Operations

Item Description Page

Auto Picture Automatically select the best capture mode. p.61

Program

Night Scene

Movie For capturing movies. Sound is also recorded. p.108

Voice Recording

Landscape

Flower

Natural Skin Tone

Portrait

Surf & Snow

Sport

Digital SR (Blur Reduction)

Pet

Kids

The basic mode for capturing images. Various functions can also be set with this mode.

Used for night scenes. Use a tripod, etc. to reduce shaking and use a flash for portraits.

For recording sound only. Be careful not to cover the microphone with your hands.

For capturing landscape views. The camera focuses on a wide range.

For capturing brightly colored flowers. Reproduces the outline of the flower softly.

Adjusts color and brightness to reproduce skin more beautifully than Portrait.

For capturing portraits. The skin tone will be brighter to make the person look healthy.

For capturing images with dazzling backgrounds, such as beaches or snowy mountains.

For subjects in fast motion. Keeps the camera in focus until the shutter is released.

Higher sensitivity reduces blur from both subject and camera movement.

For capturing images of pets in motion. A setting suitable for the pet’s coat can be set.

For capturing moving kids. Reproduces healthy and bright skin tone.

p.62

p.65

p.157

p.68

p.65

p.70

p.72

Item Description Page

Food

Digital Panorama

Digital Wide

For capturing images of food. Saturation will be rather high to make it look appetizing.

Stitches images taken with the camera to create a panoramic photograph.

Composites two images resulting in wider field of view.

S (Digital Wide) mode cannot be chosen from the Capture Mode Palette. Refer to p.81 on how to choose this mode.

p.74

p.81

Common Operations

I button

02 /0 2/ 200 8

14 :2 5

02 /0 2/ 200 8

14 :2 5

02 /0 2/ 200 8

14 :2 5

Setting the Face Recognition function

Common Operations

With the Optio M50, the Face Recognition function is available with all shooting modes except O mode. In the Face Recognition function, you can choose the Face Priority function that recognizes the subject’s face, focuses (Face Recognition AF) and performs exposure compensation (Face Recognition AE), and the Smile Capture function* that recognizes the subject’s face, focuses (Face Recognition AF), performs exposure compensation (Face Recognition AE) and captures an image automatically.

* If the face detected by the camera is too small, an image may not be captured

automatically because the Smile Capture function will not work.

Switching the Face Recognition Function

By default, the Face Recognition function is set to Face Priority On. The Face

Recognition function is switched as follows each time the

button is pressed:

Smile Capture On ´ Face Priority Off ´ Face Priority On

Face Priority On Smile Capture On Face Priority Off

383838

02/02/2008

14:25

02/02/2008

14:25

An icon indicating either Face Priority On or Smile Capture On appears on the display. (The icon does not appear when the Face Recognition function is not activated.)

02/02/2008

14:25

• The Face Recognition function cannot be set to off in b (Auto Picture), z (Natural Skin Tone), e (Portrait) or H (Kids) mode. You can select either Face Priority On or Smile Capture On.

• Face Priority On is automatically selected in b (Auto Picture), z (Natural Skin Tone), e (Portrait), H (Kids) or C (Movie) mode. When switching to another mode from one of these modes, the Face Recognition setting returns to the previous setting.

• Refer to p.68 and p.72 on how to shoot with the Face Recognition function.

Calling Up a Specific Menu

Assign menu items to the Green Button and recall these quickly by simply pressing the Green Button. This is useful for going straight to the setting screens of frequently used functions such as EV Compensation, Sensitivity and White Balance.

• The following functions can be assigned to the Green button: Green Mode, Recorded Pixels, Quality Level, White Balance, Focusing Area, AE Metering, Sensitivity, EV Compensation, Sharpness, Saturation and Contrast.

• The Green Button setting can be returned to its default setting by selecting [Reset] on the [W Setting] menu.

•

The functions assigned to the Green button can be used in the usual

manner on the original menu ([

•

You cannot save different settings for the same function on the Green button and on the original menu.

Rec.Mode]).

Common Operations

Assigning a Function to the Green Button

EV Co mpe ns ation

0 . 0

1 Select [Green Button] on the [A Rec.Mode] menu. 2 Press the four-way controller (5).

A pull-down menu appears.

3 Use the four-way controller (23)

to choose a function and press the 4 button.

4 Press the 3 button.

Common Operations

The camera returns to capture status with the current setting.

Using the Green Button

1 Press the Green button in A

mode.

The function assigned to [Green Button] on the [A Rec.Mode] menu is called up.

Green Button

9Green Mode

Recorded Pixels Quality Level White Balance Focusing Area AE Metering

Cancel

EV Compensation

2 Use the four-way controller (45)

to change the settings and press the 4 button.

The camera returns to capture status.

If a function other than the 9 (Green) mode has been assigned to the Green button, the camera returns to the original screen if no operation is performed for 5 seconds after the Green button is pressed.

0.0

Using the Playback Function

02 /0 2/ 200 8

14 :2 5

10 0

00 38

14 :2 5

02 /0 2/ 200 8

Canc el

Digi tal SR

Resi ze

Canc el

Can cel

Qua lity L evel

Press the four-way controller (3) in Q mode to display the Playback Mode Palette. You can display the playback function you want to use simply by using the four-way controller (2345) to choose an icon and pressing the 4 button.

100

100-0038

0038

02/02/2008

14:25

Digital SR

Resize

Common Operations

Cancel

OKOKOK

Cancel

OKOKOK

SHUTTER OK

Press halfway

383838

Closes the Playback Mode

Palette and goes to A mode.

02/02/2008

14:25

Recorded Pixels Quality Level

Quality Level

Cancel

OKOKOKCancel

Goes to the screen for

selected playback function.

• When the frame is placed over each icon of the Playback Mode Palette, a guide for each function appears after about 2 seconds.

• You can turn off the guide for each function on the Playback Mode Palette. (p.177)

Playback Mode Palette

Item Description Page

Digital SR

Slideshow

Resize

Cropping

Common Operations

Image/Sound

Copy

Image Rotation For rotating still pictures p.43

Digital Filter For processing still pictures as you desire p.141

[

Y Z

r ]

Save as Still image

Divide Movies

Movie Edit

Frame Composite For adding a decorative frame to a still picture p.145

Red-eye Compensation

Voice Memo For adding a voice memo to still pictures p.160

Protect

DPOF

Image Recovery For recovering deleted images p.133

Start-up Screen For setting the start-up screen p.179

For reducing the camera shake in recorded images

For playing back recorded images one after another

For changing the recorded pixels and quality of images

Creates an image from a selected portion of the image

For copying images and sound files from the built-in memory to the SD Memory Card and vice versa

For saving one frame from a movie as a still picture

For dividing a movie into two p.148

For correcting still pictures where the flash has caused the subject to appear with red eyes

For protecting images and sound files from accidental deletion

For setting the DPOF print order data for still pictures

p.122

p.123

p.136

p.138

p.139

p.147

p.144

p.134

p.149

Taking Pictures

Shutter release button

Four-way controller 4 button

Taking Pictures Automatically (Auto Picture Mode)

In b (Auto Picture) mode, when you press the shutter release button, the camera selects the most appropriate mode from six shooting modes: (Standard), A (Night Scene), q (Landscape), e (Portrait), \ (Sport) and < (Flower) modes.

1 Press the four-way controller (3) in A mode.

The Capture Mode Palette appears.

2 Use the four-way controller (2345) to select b

(Auto Picture).

3 Press the 4 button. 4 Press the shutter release button halfway.

The focus frame on the display turns green when the sublect is in focus, and the icon for selected shooting mode will appear on the top left of the display.

5 Press the shutter release button fully.

The picture is taken.

In b mode, the exposure compensation is not available. (1 p.84)

Taking Still Pictures 1p.40

Taking Pictures

Shutter release

3 8

1 4 : 25

0 2 / 02/2008

button

Four-way controller 4 button

Setting The Functions (Program Mode)

In R (Program) mode, the camera automatically sets the shutter speed and aperture for taking still pictures. However, you can select other

functions such as the flash mode and recorded pixels.

Taking Pictures

1 Press the four-way controller (3) in A mode.

The Capture Mode Palette appears.

2 Use the four-way controller (2345) to select R

(Program).

3 Press the 4 button. 4 Set the functions you want to use.

Refer to “Setting the Shooting Functions” (p.87 - p.105) for details of how to set the functions.

5 Press the shutter release button

halfway.

The focus frame on the display turns green if the subject is in focus.

6 Press the shutter release button fully.

The picture is taken.

02/02/2008

14:25

Taking Still Pictures 1p.40

Shutter release

3 8

button

Green button

Taking Pictures in the Basic Mode (Green Mode)

In the 9 (Green) mode, you can enjoy easy picture-taking using standard settings*, regardless of the settings in the [A Rec.Mode] menu.

1 Press the Green button in A

mode.

The camera switches to 9 mode.

Press the Green button again to return to the status before 9 mode was selected.

2 Press the shutter release button

halfway.

The focus frame on the display turns green if the subject is in focus.

3 Press the shutter release button fully.

The picture is taken.

Taking Pictures

• Assign 9 mode to the Green button for using 9 mode. (p.57)

Progr am

•In 9 mode, you cannot change the information on the display by pressing the 4/W button.

• You cannot use the [A Rec.Mode] menu or Capture Mode Palette in 9 mode. If you try to display the [A Rec.Mode] menu or Capture Mode Palette, - (key lock icon) appears.

• If you switched to Q mode from 9 mode, you cannot display the [W Setting] menu by pressing the 3 button. If you try to display the [W Setting] menu, - (key lock icon) appears.

• When the camera is turned off in 9 mode, it turns on in 9 mode next time the power switch is pressed.

Taking Pictures

* 9 mode settings are as shown below.

Flash Mode , (Auto) Drive Mode 9 (Standard) Focus Mode = (Standard) Information Display Normal Recorded Pixels Quality Level D (Better) White Balance F (Auto) Focusing Area J (Multiple) AE Metering L Multi-segment metering Sensitivity Auto EV Compensation ±0.0 Digital Wide P (Off) Digital Zoom O (On) Instant Review Sharpness G (Normal) Saturation G (Normal) Contrast G (Normal) Date Imprint P (Off)

1sec

Green mode must be canceled to use this function.

Program

Key lock icon

383838

Shutter release button

Four-way controller 4 button

Taking Pictures of Dark Scenes (Night Scene/Digital SR (Blur Reduction) Mode)

You can choose settings appropriate for taking pictures of dark scenes, such as nightscapes.

Use this mode when taking pictures of night views.

Use this mode to take pictures indoors or in low light conditions.

1 Press the four-way controller (3) in A mode.

The Capture Mode Palette appears.

2 Use the four-way controller (2345) to select A

(Night Scene) or 4 (Digital SR (Blur Reduction)).

3 Press the 4 button.

The shooting mode is selected and the camera returns to capture status.

4 Press the shutter release button halfway.

The focus frame on the display turns green if the subject is in focus.

5 Press the shutter release button fully.

The picture is taken.

• The shutter speed tends to be slower when taking pictures of a dark scenes.

• To prevent camera shake, use a tripod and/or the self-timer function. (p.76)

•In 4 mode, sensitivity is automatically set to Auto. (p.99)

•In 4 mode, the number of recorded pixels is fixed at f (2592 × 1944).

Taking Pictures

Shutter release

O K

button Zoom/f/y button

Four-way controller

4 button

3 button

Framing Your Pictures (Frame Composite)

In Y (Frame Composite) mode, you can take pictures using the frames stored in the camera.

Taking Pictures

1 Press the four-way controller (2) in A mode. 2 Use the four-way controller (45)

to select Y (Frame Composite) and press the 4 button.

A 9-frame display of the frame selection screen appears.

3 Use the four-way controller

(2345) to choose the frame you want to use.

4 Press y on the Zoom/f/y

button.

The selected frame appears in single-image display. You can choose another frame using either of the following operations.

• Use the four-way controller (45) to

choose a different frame. Press f on the Zoom/f/y button to return to the 9-frame display of

• the frame selection screen, and then perform Step 4 to choose a different frame.

5 Press the 4 button.

The frame appears on the screen.

6 Press the shutter release button halfway.

The focus frame on the display turns green if the subject is in focus.

7 Press the shutter release button fully.

The picture is taken.

•In Y mode, recorded pixels is fixed at h (2048 × 1536).

•In b (Auto Picture), C (Movie), O (Voice Recording), F

(Digital Panorama) or S (Digital Wide) mode, Y mode is not available.

Taking Pictures

Shutter release

Portrait

Natural Skin Tone

Can ce l

button

Four-way controller 4 button

Taking Pictures of People (Natural Skin Tone/ Portrait Mode)

(Natural Skin Tone) and e (Portrait) modes are suitable for taking

Taking Pictures

pictures of people. Face Recognition (p.56) operates for each shooting mode, making it easier to emphasize the subject’s face when taking pictures.

Use this mode when you want to enhance the natural skin tone of the people

in your pictures.

Use this mode when taking pictures of people.

1 Press the four-way controller (3) in A mode.

The Capture Mode Palette appears.

2 Use the four-way controller (2345) to select d

(Natural Skin Tone) and press the 4 button.

Choose c (Portrait) when c is displayed instead of d and press the 4 button.

3 Use the four-way controller (23)

to choose e or z.

Natural Skin Tone

Portrait

4 Press the 4 button.

The shooting mode is selected and the camera returns to capture status. When the subject’s face is recognized, a yellow focus frame appears on the display at the location of the face (when multiple faces are recognized, the main face is indicated in yellow). As the subject moves, the size and location of the focus frame change to match the location of the subject’s face.

Cancel

OKOKOK

5 Press the shutter release button halfway.

The focus frame on the display turns green if the subject is in focus.

6 Press the shutter release button fully.

The picture is taken.

• If the camera cannot recognize the subject’s face, the camera focuses using the Focusing Area currently selected.

• When Smile Capture is activated, the shutter will be released automatically when the camera recognizes the subject’s smile. However, if the face detected by the camera is too small, an image may not be captured automatically because the Smile Capture function will not work.

Taking Pictures

Shutter release

Can ce l

3 8

1 4 : 25

0 2 / 02/2008

button

Four-way controller 4 button

Taking Pictures of Your Pet (Pet Mode)

Use this mode to keep your moving pet in focus while you take the picture and capture the color of your pet’s coat. Choose the appropriate icon

depending on what color your pet is (closer to black or white or in between).

Taking Pictures

1 Press the four-way controller (3) in A mode.

The Capture Mode Palette appears.

2 Use the four-way controller (2345) to select E (Pet). 3 Press the 4 button.

The Pet mode selection screen appears.

4 Use the four-way controller (23)

to select E, F, F, H, G or G.

There are two types of icons: a cat and dog icon. (Choosing either the cat or dog icon does

not affect the resulting picture. Choose whichever you prefer.) Choose an icon (white, gray, or black) whose tone best matches your

pet’s coat or fur.

Cancel

5 Press the 4 button.

The Pet mode is selected and the camera returns to capture status.

6 Press the shutter release button

halfway.

The focus frame on the display turns green if the subject is in focus. The focus frame follows the pet while the shutter release button is pressed halfway.

OKOKOK

02/02/2008

14:25

7 Press the shutter release button fully.

The picture is taken.

Taking Pictures

Shutter release

1 4 : 2 5

3 8

0 2 / 0 2 /2 00 8

button

Four-way controller 4 button

Taking Pictures of Children (Kids Mode)

H (Kids) mode is suitable for taking pictures of moving children. It also reproduces healthy and bright skin tone. Face Recognition (p.56)

operates automatically for this mode, making it easier to emphasize the

Taking Pictures

subject’s face when taking pictures.

1 Press the four-way controller (3) in A mode.

The Capture Mode Palette appears.

2 Use the four-way controller (2345) to select H

(Kids).

3 Press the 4 button.

When the subject's face is recognized, a yellow focus frame appears on the display at the location of the face (when multiple faces are recognized, the main face is indicated in yellow). As the subject moves, the size and location of the focus frame change to match the location of the subject’s face.

4 Press the shutter release button halfway.

The focus frame on the display turns green if the subject is in focus.

5 Press the shutter release button fully.

The picture is taken.

02/02/2008

14:25

• Face Recognition AF and AE may not work if the subject is wearing sunglasses or has part of the face covered or if the subject is not looking toward the camera.

• If the camera cannot recognize the subject’s face, the camera focuses using the Focusing Area currently selected.

Taking Pictures

Shutter release

Set s hif t direc ti on

3 8

1 4

: 2 5

0 2 / 02/2008

button

Four-way controller 4 button

Taking Panoramic Pictures (Digital Panorama Mode)

The F (Digital Panorama) mode enables you to overlap the edges of the

frames so that they are easier to join together later into a panoramic

Taking Pictures

picture. Take three frames overlapping their edges by moving the camera horizontally. When the third frame is taken, the images taken with the camera are automatically stitched and the panoramic photograph is saved.

1 Press the four-way controller (3) in A mode.

The Capture Mode Palette appears.

2 Use the four-way controller (2345) to select F

(Digital Panorama).

3 Press the 4 button. 4 Use the four-way controller (45)

to choose the direction in which the images will be joined.

Set shift direction

5 Take the first frame.

Press the shutter release button fully to take the first frame. The right or left edge of the first frame appears in semi-transparent form on the left or right of the display. The position where the edge of the first frame appears depends on the direction chosen in the Step 4.

02/02/2008

:25

14:25

6 Move the camera horizontally to

Exi t

2nd f ram e

the right or left and take the

1 2

second frame.

Move the camera so that the semitransparent image and the actual view overlap and press the shutter release button. Repeat Steps 5 and 6 to take the

SHUTTER

2nd frame

Exit

third frame.

7 The panorama stitching starts when the third frame is

taken and the stitched image appears.

The stitched image does not appear when the Instant Review (p.41, p.101) is off.

• When the Face Recognition is activated (p.56), it works only when taking the first image.

• If you press the 4 button after shooting the first or second frame, you can save the captured image(s). (If you press the OK button after shooting the second frame, you can save the first and the second frames as a stitched image.)

Taking Pictures

Shutter release

D r i ve Mode

S e l f-timer

Can ce l

button

Four-way controller 4 button

Using the Self-timer

In Self-timer mode, the picture is taken ten seconds or two seconds after the shutter release button is pressed.

Stabilize the camera with a tripod when taking a picture with the self-timer.

Taking Pictures

Use this mode when you want to be included in a group picture. The picture is taken approximately ten seconds after the shutter release

button is pressed.

Use this mode to avoid camera shake. The picture is taken approximately two

seconds after the shutter release button is pressed.

1 Press the four-way controller (2) in A mode. 2 Use the four-way controller

(453) to select g or Z and press the 4 button.

Drive Mode

Self-timer

Cancel

The camera is ready to take the picture using the self-timer.

3 Press the shutter release button

halfway.

The focus frame on the display turns green if the subject is in focus.

4 Press the shutter release button fully.

The picture is taken ten seconds or two seconds later.

Focusing may be compromised if you move the camera while the self-timer lamp is blinking when taking still pictures.

OKOKOK

•

In C (Movie) mode, recording will start after ten seconds (or two seconds).

•

Press the shutter release button halfway while the self-timer is engaged to stop the countdown and press fully to restart the countdown.

• Z

cannot be selected while 9 (Green) mode is in default setting. Select

in another shooting mode and then switch the shooting mode to 9.

Shutter release

D r i ve Mode

C o n tinuous S ho o t i n g

O K

C a n cel

button

Four-way controller 4 button

Taking a Series of Pictures (Continuous Shooting Mode)

In this mode, pictures are taken continuously as long as the shutter release button is pressed.

Continuous Shooting

Each time a picture is taken, the image is saved in the memory before the next image is taken. The higher the image quality, the longer the interval between shots.

1 Press the four-way controller (2) in A mode. 2

Use the four-way controller (45) to select 1 (Continuous Shooting) and press the 4 button.

The camera is ready to take a series of pictures.

3 Press the shutter release button

halfway.

The focus frame on the display turns green if the subject is in focus.

Drive Mode

Continuous Shooting

Cancel

4 Press the shutter release button fully.

Pictures are taken continuously as long as you keep the shutter release button pressed.

• The flash does not discharge in Continuous Shooting.

• 1 (Continuous Shooting) can not be chosen in b (Auto Picture), A (Night), C (Movie), O (Voice Recording), F (Digital Panorama) or

S (Digital Wide) mode.

Taking Pictures

• You can continue shooting until the memory capacity of the SD Memory Card or built-in memory is full.

• The interval of Continuous Shooting varies according to the Recorded Pixels and Quality Level settings. The focus, exposure and white balance are locked with the first image.

•

• When the Face Recognition is activated (p.56), it works only when taking the first image.

Using the Zoom

3 8

25. 5 x

You can use the zoom to change the captured area.

1 Press the Zoom/w/x button in A

Taking Pictures

mode.

Zoom button (w) : Diminishes the subject

(Wide).

Zoom button (x) : enlarges the subject. When you press and hold the button, the camera automatically switches from optical zoom to intelligent zoom. Once the button is released and pressed again, the camera switches to Digital Zoom.

The zoom bar is displayed as follow.

Zoom in with high image quality.

Zoom/w/x button

Four-way controller

4 button

3 button

25.5 x

Zoom bar

Zoom in with some degree of image deterioration.

Zoom ratio

Optical zoom range

Intelligent Zoom range

Digital Zoom

range

*1 You can zoom in to a maximum of 5x optically. *2 The Intelligent Zoom range differs depending on the recorded

pixels. See the following table.

Recorded pixels and the maximum zoom ratio

Recorded

pixels

8M Not Available (5× optical zoom available) 5M Approx. 6.3× 4M Approx. 7.1× 3M Approx. 8.0× 2M Approx. 10.2×

1024 Approx. 15.9×

640

Approx. 25.5× (Same as 25.5×

• You are recommended to use a tripod to prevent camera shake when taking pictures at a high magnification rate.

• Pictures taken in the digital zoom range appear grainier than pictures taken in the optical zoom range.

• Intelligent Zoom is not available under the following conditions.

Intelligent Zoom Digital Zoom

Equivalent to approx.

Digital

Zoom)

- When Digital Zoom is set to Off.

- When the recorded pixels is set to E. (5x optical zoom

available)

-In C (Movie) mode

-In 4 (Digital SR) mode

- When the sensitivity is set to 3200 or 6400.

• The image enlarged using Intelligent Zoom may appear rough on the display. This does not affect the quality of recorded image.

•In C mode, only Digital Zoom is available.

25.5×

Taking Pictures

Setting the Digital Zoom

The digital zoom is set to O (On) in the default settings. To take pictures using only the optical zoom, set the digital zoom to P (Off).

1 Press the 3 button in A mode.

The [A Rec.Mode] menu appears.

2 Use the four-way controller (23) to select [Digital

Zoom].

3 Use the four-way controller (45)

to select O (On) or P (Off).

The selected setting is saved.

4 Press the 3 button.

Taking Pictures

The setting is complete and the camera returns to capture status.

Saving the Digital Zoom Function Setting 1p.106

Rec.Mode

EV Compensation Movie Digital Wide Digital Zoom Instant Review Memory

Exit

2/3

0.0

1sec

Zoom/w/x button

4 button Four-way controller

Green button 3 button

Using the Digital Wide Function (Digital Wide Mode)

S (Digital Wide) mode can stitch two pictures taken into a 35 mm film conversion equivalent to a maximum of approx. 28 mm.

Press the w side of the Zoom/w/

button when in A mode.

Press and hold the w side of the Zoom/ w/x button to set the zoom to the widest

position, release the button, and then press it again.

Press the four-way controller (2).

Press the 4 button.

The camera enters the S mode and an explanation is displayed in the center of the screen. After 5 seconds or when you press the Green button, the camera returns to capture status. Turn the camera 90º counterclockwise and align your first picture.

Enter the Digital Wide

mode?

Digital Wide

Cancel

Composites two images. Overlap the background and the guide on the left of the screen for the 2nd shot.

OKOKOK

Taking Pictures

Press the shutter release button.

The first captured image is saved, and the

Taking Pictures

shooting screen for the second image is displayed. Overlap the image on the preview guide on the left of the screen to compose your picture. If you want to stop capturing images in the S mode, go to step 6.

Press the shutter release button.

The combined first image and second image appear on the display for one second (Instant Review), and then saved to the built-in memory or SD Memory Card.

• For less distortion when taking the second picture, turn the camera to overlap the background and the preview guide on the left of the screen.

•

Some distortion may result from moving objects, repeating patterns, or if nothing exists when overlapping the first and second picture on the preview guide.

•

When the Face Recognition is activated (p.56), it works only when taking the first image.

•

The number of recorded pixels for images captured with S mode is fixed at

Guide

Press the button, or Zoom/

7 Press the four-way controller (2). 8 Press the 4 button.

S mode stops.

button, 4

w/x

button.

Exit the Digital Wide

mode?

Exit

Cancel

OKOKOK

Setting the Digital Wide Function

S mode is set to O (On) in the default settings. Use the A mode to set whether the camera enters S mode when the w side of the Zoom/w/ x button is pressed.

1 Press the 3 button in A mode.

[A Rec.Mode] appears.

2 Press the four-way controller (23) to select [Digital

Wide].

3 Use the four-way controller (45)

to select O (On) or P (Off).

The selected setting is saved.

4 Press the 3 button.

The setting is complete and the camera returns to capture status.

Rec.Mode

EV Compensation Movie Digital Wide Digital Zoom Instant Review Memory

Exit

2/3

0.0

1sec

Taking Pictures

Rec.Mode

Four-way controller

3 button

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Exit

Setting the Exposure (EV Compensation)

You can adjust the overall brightness of the picture. Use this function to take pictures that are intentionally overexposed or

underexposed.

Taking Pictures

Press the

The [A Rec.Mode] menu appears.

2 Use the four-way controller (23)

to select [EV Compensation].

Use the four-way controller (45) to

button in A mode.

Rec.Mode

EV Compensation Movie

Digital Wide Digital Zoom Instant Review Memory

Exit

select the EV value.

The selected EV value is saved. To brighten, select a positive (+) value. To darken, select a negative (–) value. You can choose the EV setting in the range of –2.0 EV to +2.0 EV in 1/3 EV steps.

4 Press the 3 button.

The setting is complete and the camera returns to capture status.

• If you use the EV compensation function frequently, you can save time by assigning it to the Green button. (p.58) When the histogram is displayed, bright portions and dark portions are

• indicated on the display, enabling you to check the exposure. (p.86)

• The EV compensation function cannot be used in b (Auto Picture) or 9 (Green) mode.

1/3

AWB

Auto

2/3

0.0

1sec

Saving the EV Compensation Value 1p.106

Displaying Shooting Information in

02 /0 2/ 200 8

14 :2 5

+1 .0

F3 .5

1/ 25 0

+1 .0

200

F3 .5

1/ 25 0

F3 .5

1/ 25 0

Capture Mode

The display changes in the following sequence each time you press the 4/W button: Normal Display, Histogram + Info, No Info. For details of each display mode, refer to “Monitor Indications” (p.18).

• Y appears if you press the shutter release button halfway when camera shake is likely to occur. To prevent camera shake, use a tripod and/or the self-timer function. (p.76)

•

In 9 (Green) mode, you cannot change the information on the display by pressing the

4/W

button.

Normal Display

02/02/2008

+1.0

02/02/2008

1/250

1/250 F3.5

F3.5

14:25

14:25+1.0

383838

1/250

1/250 F3.5

F3.5

No Info

Histogram + Info

1/250

+1.0

F3.5

+1.0

200

383838

Taking Pictures

Using the Histogram

A histogram shows the brightness distribution of an image. The horizontal axis represents brightness (dark at the left and bright at the right) and the vertical axis represents the number of pixels. The shape of the histogram before and after shooting tells

Number of pixels→

Dark portions Bright portions

←Brightness→(Dark) (Bright)

you whether the brightness and contrast are correct or not, and lets you decide if you need to use EV compensation and take the picture again.

Taking Pictures

Setting the Exposure (EV Compensation) 1p.84

Understanding Brightness

If the brightness is correct, the graph peaks in the middle. If the image is too dark, the peak is on the left side, and if it is too bright, the peak is on the right side.

Dark image Correct image Bright image

When the image is too dark, the part to the left is cut off (dark portions) and when the image is too bright, the part to the right is cut off (bright portions). Bright portions blink red on the display and dark portions blink yellow.

Displaying Shooting Information in Capture Mode 1p.85 Displaying Shooting Information in Playback Mode 1p.121

Understanding Contrast

The graph peaks gradually for images in which contrast is balanced. The graph peaks on both sides but sinks in the middle for images with a large difference in contrast and low amounts of mid-level brightness.

Setting the Shooting Functions

F o c us Mode

S t a ndard

O K

C a n cel

Four-way controller 4 button

Selecting the Focus Mode

Focus Mode

Use this mode when the distance to the subject is 40 cm

Standard

Macro

Pan Focus

Infinity

Manual Focus This mode lets you adjust the focus manually.

(16 in.) or more. The camera is focused on the subject in the autofocus area when the shutter release button is pressed halfway.

This mode is used when the distance to the subject is approx. 10 cm to 50 cm (4 in. to 24 in.). The camera is focused on the subject in the autofocus area when the shutter release button is pressed halfway.

This mode is used when you ask someone to take pictures for you, or when taking pictures of the scenery through the window of a car or train. The entire picture, from the front to the back, is focused.

This mode is used for taking distant objects. The flash is set to a (Flash Off).

1 Press the four-way controller (5)

in A mode.

The focus mode changes each time the button is pressed. You can also change the setting using the four-way controller (23).

2 Press the shutter release button

halfway.

The Focus Mode setting is saved and the camera returns to capture status.

Focus Mode

Standard

Cancel

Taking Pictures

•In 9 (Green) mode, you can only select =, q or 3.

F o c us Mode

M a n ual Foc us

O K

C a n cel

• When shooting with = selected, if the subject is closer than 40 cm, the camera automatically focuses from 10 cm.

• When shooting with q selected, if the subject is further than 50 cm away, the camera automatically focuses to infinity.

Saving the Focus Mode 1p.106

Manual Focus

The procedure for setting the focus manually (\) is described below.

1 Press the four-way controller (5)

in A mode.

Use the four-way controller (5) to select

Taking Pictures

The central portion of the image is magnified to fill the screen of the display when focusing.

Press the four-way controller (23).

The \ indicator appears on the display to indicate the approximate distance to the subject. Use the four-way controller (23)

and press the 4 button.

Cancel

Focus Mode

Manual Focus

to adjust the focus using the indicator as a

guide.

2 : for distant focus 3 : for closer focus

Press the 4 button.

\ indicator

The focus is fixed and the camera returns to capture status. In addition, the focus position is fixed five seconds after you remove your finger from the four-way controller (5). After the focus is fixed, you can press the four-way controller (5) again to display the \ bar and readjust the focus.

To switch from \ to another focus mode, press the four-way controller (5) while the \ bar is displayed.

Capture mode and drive mode cannot be changed while the \ bar is displayed.

Four-way controller 4 button

Selecting the Flash Mode

Flash Modes

Auto

Flash Off

Flash On The flash discharges regardless of the brightness.

Auto + Red-eye

Flash On + Red-eye

Soft Flash

• The flash does not discharge (a Flash Off) in C (Movie) or F (Digital Panorama) mode, or when the drive mode is set to 1, or the focus mode is set to s.

• A pre-flash discharges when using the red-eye reduction function.

•In 9 (Green) mode, you can only select , or a.

•In A (Night) mode, you cannot select , and c.

The flash discharges automatically depending on the light conditions.

The flash does not discharge, regardless of the brightness. Use this mode to take pictures where flash photography is prohibited.

This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subject’s eyes. The flash discharges automatically.

This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subject’s eyes. The flash discharges regardless of the light conditions.

This mode reduces the intensity of the flash so that the flash is not too bright even when fired at close range. The flash discharges regardless of the light conditions.

Taking Pictures

Using the flash when capturing images at a close distance may cause irregularities in the image due to the light distribution.

1 Press the four-way controller (4)

Aut o

Fla sh Mo de

Can ce l

in A mode.

Flash Mode

The flash mode changes each time the button is pressed. You can also change the setting using the four-way controller (23).

2 Press the 4 button.

The camera returns to capture status with the selected flash mode.

[About the red-eye phenomenon] Taking pictures using the flash may cause the subject’s eyes to appear red in the resulting picture. This phenomenon occurs when the light from the flash is reflected in the subject’s eyes. It can be

Taking Pictures

reduced by illuminating the area around the subject or moving closer to the subject and zooming out to a wider angle. Setting the flash mode to c (Auto + Red-eye) or d (Flash On + Red-eye) is also an effective way of reducing red eyes. If the subject’s eyes appear red despite such precautions, they can be corrected by the red-eye compensation function (p.144).

Saving the Flash Mode 1p.106

Flash Mode

Cancel

Auto

OKOKOK

1/3

AWB

Auto

Four-way controller

4 button 3 button

Rec.Mode

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Exit

Selecting the Recorded Pixels

You can choose from seven recorded pixels settings for still pictures. The larger your recorded pixels, the clearer the details will appear when you print your picture. As the quality of the printed picture also depends on the image quality, exposure control, resolution of the printer and other factors, you do not need to select more than the required number of recorded pixels. i (1600×1200) is adequate for making postcard-size prints. The more pixels there are, the larger the picture and the bigger the file size. The data volume also varies depending on the quality level setting (p.93).

Recorded Pixels

Recorded Pixels Use

E 3264×2448

f 2592×1944 g 2304×1728 h 2048×1536 i 1600×1200 l 1024× 768 m 640× 480

For printing high quality photos or A4-size pictures or larger, or editing images on a PC.

Clearer

For making postcard-size prints.

For posting on a website or attaching to e-mail.

Taking Pictures

1 Press the 3 button in A mode.

The [A Rec.Mode] menu appears.

2 Use the four-way controller (23) to select [Recorded

Pixels].

3 Press the four-way controller (5).

Can ce l

A pull-down menu appears.

4 Use the four-way controller (23)

to change the number of recorded pixels.

5 Press the 4 button.

The Recorded Pixels setting is saved.

6 Press the 3 button.

The camera returns to capture status with the current setting.

• When drive mode is set to Y (Frame Composite), the number of

Taking Pictures

recorded pixels is fixed at h.

• The number of recorded pixels for images captured in S (Digital Wide) or 4 (Digital SR) mode is fixed at f. (However, the number of recorded pixels will be h if you exit the Digital Wide mode without taking second picture.)

• If you take and save only the first frame in F (Digital Panorama) mode, the number of recorded pixels fixed at i.

• If you use the [Recorded Pixels] function frequently, you can save time by assigning it to the Green button. (p.58)

Recorded Pixels and Quality Level of Still Pictures 1p.31

Storage Capacity

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Cancel

8 5 4 3 2

1024

640

1/3

AWB

Auto

Four-way controller

4 button 3 button

Rec.Mode

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Exit

Selecting the Quality Level

You can select the quality (compression rate) of still pictures. The more stars, the lower the compression rate and the clearer the picture, but the file size becomes larger. The recorded pixels setting also affects the file size (p.91).

Quality Level

C Best Lowest compression rate. Suitable for photo prints.

D Better

E Good

Standard compression rate. Suitable for viewing the image on a computer screen.

Highest compression rate. Suitable for posting on a website or attaching to e-mail.

1 Press the 3 button in A mode.

The [A Rec.Mode] menu appears.

Use the four-way controller (23) to select [Quality Level].

3 Press the four-way controller (5).

A pull-down menu appears.

4 Use the four-way controller (23)

to change the quality level.

5 Press the 4 button.

The Quality Level setting is saved.

Storage Capacity

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Cancel

Auto

6 Press the 3 button.

The camera returns to capture status with the current setting.

If you use the [Quality Level] function frequently, you can save time by assigning it to the Green button. (p.58)

Recorded Pixels and Quality Level of Still Pictures 1p.31

Taking Pictures

Rec.Mode

C a n cel

A u t o

O K

Four-way controller

4 button 3 button

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Exit

Adjusting the White Balance

You can take pictures in natural colors by adjusting the white balance according to the light conditions at the time of shooting.

Taking Pictures

White Balance

Auto The camera adjusts the white balance automatically.

Daylight Use this mode when taking pictures outside in sunlight.

Shade Use this mode when taking pictures outside in the shade.

Tungsten Light

Fluores. Light

Manual Use this mode when adjusting the white balance manually.

Use this mode when taking pictures under electric or other tungsten light.

Use this mode when taking pictures under fluorescent light.

Set another white balance if you are not satisfied with the color balance of pictures taken with white balance set to AWB (Auto).

1 Press the 3 button in A mode.

The [A Rec.Mode] menu appears.

2 Use the four-way controller (23) to select [White

Balance].

3 Press the four-way controller (5).

The White Balance screen appears.

White Balance

Auto

4 Use the four-way controller (23)

to change the setting.

Cancel

1/3

AWB

Auto

OKCancel

5 Press the 4 button.

C a n cel

O K

The White Balance setting is saved.

6 Press the 3 button.

The camera returns to capture status with the current setting. Refer to “Manual Setting” below for instructions on adjusting the white balance manually.

If you use the [White Balance] function frequently, you can save time by assigning it to the Green button. (p.58)

Saving the White Balance 1p.106

Manual Setting

Have a blank sheet of white paper or similar material ready.

1 In the White balance screen, use the four-way controller

(23) to select K (Manual).

2 Point the camera at the blank

White Balance

sheet of paper or other material so that it fills the frame displayed in the center of the screen.

SHUTTER

3 Press the shutter release button

fully.

The white balance is automatically adjusted.

Cancel

Adjust

OKCancel

4 Press the 4 button.

The setting is saved and the screen returns to the [A Rec.Mode].

5 Press the 3 button.

The camera returns to capture status.

Taking Pictures

Rec.Mode

Can ce l

Four-way controller

4 button 3 button

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Exit

Setting the AE Metering

You can set the area of the screen where the brightness is metered to determine the exposure.

AE metering

Taking Pictures

Multi-segment metering

Centerweighted metering

Spot AE metering

The camera divides the image into 256 areas, meters the brightness and determines the exposure.

The camera takes a reading of the overall brightness of the picture with the center of the image having more influence on the exposure.

The camera determines the exposure by metering the brightness only at the center of the image.

1 Press the 3 button in A mode.

The [A Rec.Mode] menu appears.

Use the four-way controller (

3 Press the four-way controller (5).

A pull-down menu appears.

Use the four-way controller (23) to select the AE Metering setting.

Press the 4 button.

The AE Metering setting is saved.

Press the

The camera returns to capture status with the current setting.

button.

) to select [AE Metering].

Rec.Mode

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Cancel

1/3

AWB

Auto

1/3

AWB

• When the shutter release button is pressed halfway, the brightness is metered and the exposure is determined.

• When the subject is outside the focusing area and you want to use spot AE metering, aim the camera at the subject and press the shutter release button halfway to lock the exposure, then compose your picture again and press the shutter release button fully.

• If you use the [AE Metering] function frequently, you can save time by assigning it to the Green button. (p.58)

Saving the AE Metering 1p.106

Taking Pictures

Rec.Mode

Four-way controller

4 button 3 button

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Exit

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.

Sensitivity

Taking Pictures

1600 3200 6400

The sensitivity is automatically adjusted by the camera. (sensitivity 64 -

Auto

800)

100

• The lower the sensitivity, the less noise that affects the image. The

200 400 800

shutter speed will be slower in low light conditions.

• Higher sensitivity settings use faster shutter speeds in low light conditions to reduce camera shake, but the image may be affected by noise.

1 Press the 3 button in A mode.

The [A Rec.Mode] menu appears.

2 Use the four-way controller (23) to select [Sensitivity]. 3 Press the four-way controller (5).

A pull-down menu appears.

4 Use the four-way controller (23)

to change the sensitivity.

5 Press the 4 button.

The sensitivity setting is saved.

Rec.Mode

Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity

Cancel

6 Press the 3 button.

The camera returns to capture status with the current setting.

1/3

AWB

Auto

64 100

200 400

1/3

OKOKOK

Pentax M50 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

USING YOUR CAMERA SAFELY

Care to be Taken During Handling

Contents

Composition of the Operating Manual

Camera Features

Checking the Contents of the Package

Names of Parts

Names of Operating Parts

Monitor Indications

Getting Started

Attaching the Strap

Powering the Camera

Charging the Battery

Installing the Battery

Using the AC Adapter

Installing the SD Memory Card

Recorded Pixels and Quality Level of Still Pictures

Recorded Pixels, Quality Level and Frame Rate of Movies

Turning the Camera On and Off

Playback Mode

Initial Settings

Setting the Display Language

Setting the Date and Time

Quick Start

Taking Still Pictures

Playing Back Still Pictures

Playing Back Images

Playing Back the Previous or Next Image

Rotating the Displayed Image

Common Operations

Understanding the Button Functions

Setting the Camera Functions

Setting with the Menus

Menu List

Setting the Shooting Mode

Setting the Face Recognition function

Calling Up a Specific Menu

Using the Playback Function

Taking Pictures

Taking Pictures

Taking Pictures Automatically (Auto Picture Mode)

Setting The Functions (Program Mode)

Taking Pictures in the Basic Mode (Green Mode)

Taking Pictures of Dark Scenes (Night Scene/Digital SR (Blur Reduction) Mode)

Framing Your Pictures (Frame Composite)

Taking Pictures of People (Natural Skin Tone/ Portrait Mode)

Taking Pictures of Your Pet (Pet Mode)

Taking Pictures of Children (Kids Mode)

Taking Panoramic Pictures (Digital Panorama Mode)

Using the Self-timer

Taking a Series of Pictures (Continuous Shooting Mode)

Using the Zoom

Using the Digital Wide Function (Digital Wide Mode)

Setting the Exposure (EV Compensation)

Setting the Shooting Functions

Selecting the Focus Mode

Selecting the Flash Mode

Selecting the Recorded Pixels

Selecting the Quality Level

Adjusting the White Balance

Setting the AE Metering

Setting the Sensitivity