PEERLESS GBS-135F25AL02-04 User Manual [ru]

Transducer Specification Sheet

Model No:
Product Line:

GBS-135F25AL02-04
Tymphany

Product Description

This 5.25 inch 4 ohm tansducer member of the GBS family provides a very slim woofer capable
of large excursion. An anodized Al cone helps to extends the piston bands in the working range.A
highly optimized ferrite magnet and unique suspension layout combine to give a cost effective
solution in a previously unavailable package.

Mechanical Drawing

Rev:
Last Update:

1
2015-10-12 23:45:53

Specifications

DC Resistance
Minimum Impedance
Voice Coil Inductance
Resonant Frequency
Mechanical Q Factor
Electrical Q Factor
Total Q Factor
Ratio Fs/Qts
Half Space Sensitivity @2.83V
Half Space Sensitivity @1W/1M
Gap Height
Maximum Linear Excursion
Ferrofluid Type
Transducer Mass

Revc Ohms 3.28 5.0%
Zmin Ohms 3.88 7.5%
Le mH 0.21
Fs Hz 62.97 15%
Qms 4.12
Qes 0.66
Qts 0.57
F Fs/Qts 110.47
db@2.83V/1M dB 88.45 +/- 1.0db
db@1W/1M dB 85.3 +/- 1.0db
Gh mm 6
Xmax mm 3.3
FF
Kg 0.8

Frequency and Impedance Response

Energy Bandwidth Product
Moving Mass
Suspension Compliance
Effective Cone diameter
Effective Piston Area
Effective Volume
Motor Force Factor
Motor Efficiency Factor
Voice coil former Material
Voice coil inner diameter
Rated Noise Power
Test Spectrum Bandwidth
Transducer Size

EBP (1/Qes)*fs
Mms g 12.3
Cms um/N 519.1
D cm
Sd cm^2 85.7
Vas L 5.35
BL Tm 4.91
ß (T*M^2)/Ohms 7.4
VCfm ASV
VCd mm 25.5
P W 35
50Hz-20kHz
Inch 5.25 in

Address : Room 1307-8 Dominion Centre, 43-59 Queens Rd East, Wanchai, Hong Kong

Tymphany HK LTD

E-mail: [e-mail]