Paradigm Pacer2800, Pacer 1400 Owner's Manual

Page 1
OWNER’S MANUAL
Call for service 07 3272 7010
PDG0035
Page 2
Table of Contents
2
Features __________________________
Page
3
Exploded View _______________________
Part List ____________________________
Included Hardware__________________
Assembly Instruction_________________
Maintenance _______________________
Fold & Transport ____________________
Operations_________________________
4 -5
6
7
7
9
10 - 11
12
13
14 - 19
Bluetooth Connection __________________
Monitor Your Heart Rate _______________
Warm Up__________________________
Fitness Guide _______________________
Trouble Shooting _____________________
Warranty / Service __________________
20
21- 22
23
24
25 - 26
27 - 28
Call for service 07 3272 7010
Page 3
Features
3
3
The treadmill has been designed and constructed to provide trouble free usage and enjoyable exercise. You can greatly improve your understanding and benefits of exercising by carefully reading the instructions given in this manual .Please familiarize yourself with the maintenance advice provided for you.
SPECIFICATION
Horsepower Continuous / Peak: 3.5 / 7 hp Speed Range: 0.8 - 18 KPH
Incline Level: 0 - 12% / Power Built-in USB charger, Speakers, Chest Belt Receiver, Bluetooth
Console
Quick buttons
Pulse sensors
Running Belt
Console Mast
MAX.USER WEIGHT 150 KGS
2
Call for service 07 3272 7010
Page 4
Exploded V iew
4
2
Call for service 07 3272 7010
Page 5
Exploded V iew
5
2
Page 6
Part List
6
2
Call for service 07 3272 7010
Page 7
Important Safety Information
7
IMPORTANT: THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY Your treadmill was designed and built for optimum safety. However, certain precautions apply
whenever you use your treadmill. Be sure to read the manual before assembly and operation. Also, please note the following safety precautions:
DANGER: To reduce the risk of electric shock, always unplug the treadmill from the electrical outlet immediately after using and before cleaning.
1. Read OWNER’S MANUAL and all accompanying literature and follow it carefully before using your treadmill.
2. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced while using this equipment, STOP the workout and CONSULT A PHYSICIAN IMMEDIATELY.
3. Never leave the treadmill unattended when plugged in. Unplug from the outlet when not in use and before removing or replacing parts.
4. Never operate the treadmill if it has a damaged cord or plug, if it is not working properly, if it has been dropped, damaged, or exposed to water.
5. Do not pull the treadmill by the power supply cord or use cord as a handle. Keep cord away from heated surfaces and open flames.
6. Fitness equipment must always be installed and used on a flat surface. Do not use outdoors or near water.
7. Do not insert any objects into any openings.
8. Keep children and pets away from this equipment at all times while exercising.
9. Handicapped individuals should have medical approval and close supervision when using this treadmill.
10.Do not place hands or feet under the treadmill. Always keep hands and legs off the treadmill when others are using it.
11.Never turn on treadmill while standing on treadbelt. Always return the treadmill to slow speed to provide for safe dismount and low speed restart.
12.To disconnect, turn all controls to the off position, then remove plug from outlet.
13. Use the treadmill only for it is intended use as described in this manual.
14. Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward. This allows your heart rate to gradually increase and decrease and will help prevent straining muscles.
15. Never hold your breath while exercising. Breathing should remain at a normal rate in conjunction with the level of exercise being performed.
16. Start your program slowly and very gradually increase your speed and distance.
17. Always wear suitable clothing and footwear while exercising. Do not wear loose fitting clothing that could become entangled with the moving parts of your treadmill.
18. Do not walk or jog barefoot, in stockings or loose fitting shoes or slippers.
19. Care must be taken when lifting or moving the equipment, so as not to injure your back. Always use proper lifting techniques.
WARNING: Before beginning any exercise program consult your physician. This is especially important for individuals over the age of 35 or persons with pre-existing health problems. Read all instructions before using any fitness equipment. We assume no responsibility from personal injury or property damage sustained by or through the use of this product.
CAUTION!! Please be careful when opening this unit.
Call for service 07 3272 7010
Page 8
Electrical Informatio n
8
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Large switching currents of the drive motor will trip GFCI type outlets, as any appliance with a large motor. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.
NEVER remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a pool or spa, or in any other high humidity environment. The temperature specification is 4 to 48 degrees Celsius, and humidity limit is 95%, non-condensing (no water drops forming on surfaces).
Grounding Instructions
This product must be grounded. If the treadmill should malfunction or breakdown, grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of elec­tric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet. Have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 240-volt circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet, (below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
Adapter
Grounded Outlet
Tab of
Metal Screw
Grounding
Screw
Grounding Pin
Grounded Outlet Box
Call for service 07 3272 7010
4
Page 9
Included Hardware
9
Collapse box bottom and lay sides down before assembly and do not attempt to move the treadmill out of its box until the unit is fully assembled. Locate the hardware bag and parts that are listed in the chart below.
Call for service 07 3272 7010
Page 10
Assembly Instruction
10
Lift up the upright handlebar, and then fasten the screws (B) and washers (D)/ (E)
1
tightly at the bottom of the upright handlebar.
2
Attach the base side caps (I) with screws (C) at the bottom of the upright handlebars and tighten them well.
Call for service 07 3272 7010
Page 11
Assembly Instruction
11
3
Fasten the screws (B) and washers (E) at the inner side of the upright handlebars.
4 5
Attach the front handlebar caps (J) with screws (C) at the front of the horizontal handlebars and tighten them firmly with screwdriver (F).
Adjust the console to the desired viewing angle, and then use the Allen wrench (G) to tighten these 2 screws.
Call for service 07 3272 7010
Page 12
Maintenance
12
ADJUST THE BELT TENSION
If the running belt feels as though it is “slipping” or hesitating when you plant your foot during a run, the tension on the running belt may have to be increased. To increase the tension of the running belt, turn both left and right adjustment bolts clockwise evenly.
CENTERING RUNNING BELT
Start the treadmill without anyone on the running belt, press speed up bottom until speed reached 16kph.
If toward the left side of the deck
Using an Allen wrench, turn the left adjustment bolt 1/8 turn in a clockwise direction and the right adjustment bolt counter clockwise 1/8.
If toward the right side of the deck
Using an Allen wrench, turn the right adjustment bolt 1/8 turn in a clockwise direction and the left adjustment bolt counter clockwise 1/8.
TREADMILL LUBRICATION
Lubricating under the treadbelt will ensure superior performance and extend its life expectancy. After the first 25 hours of use (2-3 months) apply one half bottle of lubricant. Every 50 hours of use (5-8 months) apply one half bottle of lubricant.
HOW TO CHECK TREADBELT FOR PROPER LUBRICATION
Lift one side of the treadbelt and feel the top surface of the treadboard. If the surface is slick to the touch, then no further lubrication is required. If the surface is dry to the touch, apply one packet of lubricant or half of the bottle of lubricant.
HOW TO APPLY LUBRICANT
Lift one side of treadbelt. Pour one half of the lubricant bottle
under the center of the treadbelt on the top surface of the treadboard.
Walk on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE: DO NOT over lubricate treadboard. Any excess lubricant that comes out should be wiped off.
IMPORTANT: ONLY USE HALF THE BOTTLE OF LUBRICANT PER APPLICATION LUBRICATION SCHEDULE.
Call for service 07 3272 7010
Page 13
Folding & Transport
13
FOLDING
NOTE! Make sure the treadmill’s elevation is at its
lowest position before folding the deck to avoid damage to your machine.
To fold the machine, raise the deck until it locks into position.
Make sure you hear the click sound of the deck locking into position. This is to ensure the deck is locked in place and will not drop back down.
TO RELEASE THE RUNNING DECK
Lightly kick the switch indicated in the middle of the shock absorb rod to fold down the frame deck.
NOTICE! This machine has a built-in safety unfolding feature to help lower the deck slowly. Please make sure there are no children or other things under the deck when you lower it.
TO MOVE THE TREADMILL
Before moving the treadmill, be sure the power cord is unplugged from the wall and the treadmill. Fold up the running deck until it is locked and push the equipment on its transportation wheels. Hold the handlebars to move the treadmill.
To prevent malfunctioning of the treadmill, store it in a dry place with as little temperature variation as possible, protected against dust. Always unplug the treadmill from the electrical outlet when not in use.
2
Call for service 07 3272 7010
Page 14
Operations
14
BEFORE STARTING
Straddle the belt and stand on the plastic side rails. Attach the safety key clip to your clothing. Do not stand on the running belt while starting or stopping the treadmill. If you are a new user, stay at a slow speed and hold onto the handrails until you become comfortable.
BUTTON FUNCTIONS
POWER Turns the treadmill on and off
START/STOP Starts or stops the workout
ENTER Confirm selection
SELECT To choose a program. When power is off, press and hold to clear user’s setting.
SPEED ▼▲
Adjusts speed ( 0.2 kph increment) or scroll through the programs
INCLINE ▼▲ Adjust incline levels by 1% or scroll through the programs
SAFETY KEY Attach the safety key in its position to power on the computer. When safety key is pulled away, the treadmill stops
SPEED DIRECT Quickly select speed KEYS
INCLINE DIRECT Quickly select incline KEYS
Call for service 07 3272 7010
Call for service 07 3272 7010
Page 15
Operations
15
DISPLAY
DOT MATRIX Two 10x20 dot matrix reflects hearts on HRC programs (P17-19), and WEIGHT & AGE on Body fat program (P23). Reflects incline & speed on all other programs.
INCLINE Displays your current workout elevation from 0 to 12%.
TIME Shows workout time. Maximum time can be displayed is 99:59
PULSE Displays heart rate beat per minute. To get a pulse, place both hands on the pulse grips on the handrail. The console is equiped with Chest Strap receiver. you can use a Chest Strap (not incuded with the treadmill) for accurate pulse display.
SPEED Displays the current running speed from 0.8 Kmh- 18 KPH
CALORIES / Shows estimated calories burned during the workout. Press SELECT to show the ELEVATION GAIN elevation gain during the workout.
DISTANCE / Shows distance the treadmill belt has gone on the current workout. BODY FAT Displays Body Fat when using Body Fat program 23.
Enter Weight: After the power is on, WT appears on the dot matrix, and the preset user’s weight 60 kg will appear. Adjust the user’s weight by using , then press ENTER.
Quick Start:
Press POWER, then press START The treadmill will start at 0.8 kph. You can adjust the speed and incline.
Program: Press POWER
Press to scroll through programs Press ENTER to set timer or press START
PROGRAM DESCRIPTION
User can adjust the speed or incline for all programs during exercise
P2 - P5 Elevation: The incline is preset, the speed is controlled by the user. The incline changes every minute.
P6 - P9 Speed: The speed is preset, the incline is controlled by the user. The speed changes every minute.
P10 - P12 Speed & Incline Combination: The speed and incline are preset.
P13 Target Distance: This program counts down the distance goal that the user sets before
exercing. Press UP/DOWN to set a distance, press ENTER to confirm then press START
Call for service 07 3272 7010
Page 16
Operations
16
16
P14 Target Calories: This program counts down the calorie goal that the user sets before exercing. Press UP/DOWN to set the calorie, press ENTER to confirm then press START
P15 Target Time: This program counts down the time goal that the user sets before exerc­ing. Press UP/DOWN to set workout time, press ENTER to confirm then press START
P16 Target Elevation Gain: This program counts down the elevation goal. Use UP/DOWN to enter elevation goal, press ENTER, press START. The user controls the speed and incline.The elevation counts down in the Elevation Gain (EG) display. Press SELECT to display EG in the calorie window.
P17 HRC 1 - Weight Loss (Speed): You must wear a chest belt (not included) or grip the hand pulse sensor to use this program. Use UP/DOWN to input AGE, press ENTER, press START. After 3 minutes warm-up, the speed will adjust at a rate of 1 KPH every 40 seconds until the target heart rate zone is reached.
P18 HRC 2 - Cardio (Incline): You must wear a chest belt (not included) or grip the hand pulse sensor to use this program. Use UP/DOWN to input AGE, press ENTER, press START. After 3 minutes warm-up, the incline will adjust at a rate of 1% every 30 seconds until the target heart rate zone is reached.
P19 HRC 3 -Fatburn (Speed & Incline): You must wear a chest belt (not included) or grip the hand pulse sensor to use this program. Use UP/DOWN to input AGE, press ENTER, press START. After 3 minutes warm-up, the incline will adjust at a rate of 1% every 30 seconds until the target heart rate zone is reached.
P20, 22 User Programs: After selecting this program, adjust the speed and incline for each segment and press ENTER. Press START to begin. If speed or incline is changed during the workout, the new values will be saved. When the LCD power is off, press SELECT until it beeps twice to clear the value set by user.
P23 Body Fat Program: This program calculates the body fat percentage for your reference.
A. When the dot matrix shows “AGE”: Press UP/DOWN to adjust, press ENTER to confirm. B. When the dot matrix shows “SEX”: Press UP/DOWN to choose, 1 represents Female and 0 represents Male, press ENTER to confirm. (preset: 0) C. When the dot matrix shows “HT”: Press UP/DOWN to adjust the height, press ENTER to confirm. (preset: 160 cm, range: 100~240cm) D. When the dot matrix shows “WT”: Press UP/DOWN to adjust the weight, press ENTER to confirm. (preset: 60Kgs, range: 10~250Kg) E. After finishing the input, the dot matrix shows “Hrt R”, please hold the heart rate
sensor with two hands for a while, when the computer received the heart rate value, the dot matrix shows “END” and shows the BODYFAT value in % within 10 seconds in the distance display. If the computer received no signal of heart rate for 20 seconds, the LCD will show Er05 with beeps at the same time.
Call for service 07 3272 7010
Page 17
Operations
17
INCLINE
(%)(%)
(%)
P1 Manual
P2 Rolling Hills
P3 Mountain Pass
P4 Mountain Peak
P9 Jogging Interval
(KPH/MPH)
P10 Cardio Burn
(%)
(KPH/MPH)
P11 Hill Interval
(%)
(KPH/MPH)
P16 TARGET ELEVATION GAIN
P17 HRC-WEIGHT LOSS(SPEED)
P18 HRC2-CARDIO HEART(INCLINE)
P19 HRC3-INTERVAL FATBURN(SP+IN)
(%)
P5 Calorie Burn
(%)
P6 Walking
(KPH/MPH)
P7 Walking II
(KPH/MPH)
P12 Mountain Interval
P20 USER 1
(%)
(KPH/MPH)
P13 T ARGET DISTANCE
P21 USER 2
P14 T ARGET CALORIES
P22 USER 3
P8 Jogging
(KPH/MPH)
P15 T ARGET TIME
Call for service 07 3272 7010
P23 BODY FAT
Page 18
Operations
18
Muscle Exercise Figure
The human figure shown in the LCD console indicates those muscle groups where are being used during workout with treadmill. Users can choose different training approaches to achieve the best exercise goal.
A: Either speed reaches 12km/h or the elevation reaches 10%, the darken muscles shown on the right figure indicates those muscle groups are being used to exercise. B: Either speed reaches 10km/h or the elevation reaches 8%, the darken muscles shown on the right figure indicates those muscle groups are being used to exercise. C: Either speed reaches 8km/h or the elevation reaches 6%, the darken muscles shown on the right figure indicates those muscle groups are being used to exercise. D: Either speed reaches 6km/h or the elevation reaches 4%, the darken muscles shown on the right figure indicates those muscle groups are being used to exercise. E: Either speed reaches 4km/h or the elevation reaches 3%, the darken muscles shown on the right figure indicates those muscle groups are being used to exercise.
Call for service 07 3272 7010
Page 19
Operations
19
SPEAKER & USB PORT
To play music, user can connect a MP3 or any other devices with speaker wire to the
console speakers for music playing. The speaker wire is enclosed in the hardware. (We
do not provide the MP3).
Our console also provides USB port, which only capable for charging function, to
charge user’s electronic devices. During power on regardless of using program,
console automatically begins to provide electric power. When connecting user’s
electronic devices to the USB port on the console; it begins to charge.
Please be noted this USB port provides 5V 1A for electricity charging. It only
charges electronic devices and has no other feature.
Metric/Miles:
The user can switch the Metric values (Kilometer) to Imperial values (Mile) or the
Imperial values to Metric values. When power is off, press ENTER until it beeps to
switch the distance from Metric to Imperial or Imperial to Metric.
Odometer:
An odometer showing accumulated distance will appear in the time window for one
second when you press the safety key button or pull the cord of the safety key.
Time-Out:
If the treadmill is turned on, and the belt is not moving, the monitor will shut-off after five minutes.
Re-Start:
If the treadmill is stopped during use, when the START button is pressed again, the
treadmill will ramp-up the speed to where it was stopped. If the treadmill is
stopped for 5 minutes or more, POWER is lost and the treadmill will have to be re-started.
Call for service 07 3272 7010
Page 20
Bluetooth Connection
20
Bluetooth Function
****Please be noted**** (1). Apple devices are shown as monitor and do not have the ability nor the capability to control your treadmill. All the operation keys will be on the console of the treadmill. (2). One treadmill can only connect with one Apple device.
Steps:
1. Please download “PAFERS Tread Monitor” from Apple Store before using your
Apple device to connect with treadmill.
Noted: Pafers provides both iPhone and iPad Bluetooth apps, please make sure you download the correct version of device app for your Apple device.
2. Once you downloaded the application, for the first time paring, please go to setting and connect manually (SETTING
GENERAL) and turn on Bluetooth. Searching
for the preset Bluetooth Treadmill name, for instance: Paradigm – Pacer 2800”.
3. Once your Apple device is connected with the treadmill, now you can begin to start the program. Tap on “PAFERS Tread Monitor” to begin.
4. After you heard the “BEEP” sound and the treadmill console will be switch off the light to your Apple device. From your Apple device, the darken part becomes colorful (shown as below pictures), which means they (the Apple device and the treadmill) are connected.
5. After you chose your desired exercising program, your Apple device will ask you to press “START” key on the console to start the treadmill.
(you can press “START” right after you heard the “BEEP” sound)
6. Press the “STOP” key to pause the treadmill, if you want to continue your program please press “START” to remain. After remaining the program, the treadmill will countdown 3 seconds then starts the treadmill.
7. When press the “START”/”STOP” more than 3 seconds, your Apple device will exit the program.
Call for service 07 3272 7010
Page 21
Monitoring Your Heart Rate
21
To obtain the greatest cardiovascular benefits from your exercise workout, it is important to work within your target heart rate zone. The American Heart Association (AHA) defines this target as 60%-75% percent of your maximum heart rate.
Your maximum heart rate may be roughly calculated by subtracting your age from 220. Your maxi­mum heart rate and aerobic capacity naturally decreases as you age. This may vary from one person to another, but use this number to find your approximate effective target zone. For example, the maximum heart rate for an average 40 year-old is 180 bpm. The target heart rate zone is 60%­75% of 180 or 108-135 bpm. See Fitness Safety on page 17
Before beginning your workout, check your normal resting heart rate. Place your fingers lightly against your neck, or against your wrist over the main artery. After finding your pulse, count the number of beats in 10 seconds. Multiply the number of beats by six to determine your pulse rate per minute. We recommend taking your heart rate at these times; at rest, after warming up, during your workout and two minutes into your cool down, to accurately track your progress as it relates to better fitness.
During your first several months of exercising, the AHA recommends aiming for the lower part of the target heart rate zone-60%, then gradually progressing up to 75%. According to the AHA, exercising above 75% of your maximum heart rate may be too strenuous unless you are in top physical condi­tion. Exercising below 60% of your maximum will result in minimal cardiovascular conditioning.
Check your pulse recovery rate – If your pulse is over 100 bpm five minutes after you stop exercis­ing, or if it’s higher than normal the morning after exercising, your exertion may have been too strenuous for your current fitness level. Rest and reduce the intensity next time.
Fitness Safety The target heart rate chart indicates average rate zones for different ages. A variety of different factors (including medication, emotional state, temperature and other conditions) can affect the target heart rate zone that is best for you. Your physician or health care professional can help you determine the exercise intensity that is appropriate for your age and condition
(MHR) = Maximum Heart Rate (THR) = Target Heart Rate
220 - age = maximum heart rate (MHZ) MHZ x .60 = 60% of your maximum heart rate. MHZ x .75 = 75% of your maximum heart rate.
For example, if you are 30 years old, your calculations will be as follows: 220 - 30 = 190 190 x .60 = 114 (low end or 60% of MHZ) 190 x .75 = 142 (high end or 75% of MHZ) 30 year-old (THR) Target Heart Rate would be 114-142 See Heart Rate Table (on next page) for additional calculations.
Call for service 07 3272 7010
Page 22
Monitoring Your Heart Rate
22
Call for service 07 3272 7010
Page 23
Warm Up
23
Quadriceps Stretch
With one hand against a wall for balance, reach behind you and pull your right foot up. Bring your heel as close to your buttocks as possible. Hold for 15 counts and repeat with left foot up.
Inner Thigh Stretch
Sit with the soles of your feet together with your knees pointing outward. Pull your feet as close into your groin as possible. Gently push your knees towards the floor. Hold for 10 counts
Toe Touches
Slowly bend forward from your waist, letting you back and shoulders relax as you stretch toward your toes. Reach down as far as you can and hold for 15 counts.
Hamstring Stretches
Sit with your right leg extended. Rest the sole of your left foot against your right inner thigh. Stretch toward your toe as far as possible. Hold for 15 counts Relax and then repeat with left leg extended.
Call for service 07 3272 7010
Page 24
Fitness Guide
24
STARTING YOUR WORKOUT
ALWAYS CONSULT YOUR DOCTOR BEFORE UNDERTAKING A NEW EXERCISE REGIME. IF YOU EXPERIENCE NAUSEA, DIZZINESS OR OTHER ABNORMAL SYMPTOMS DURING EXERCISE, STOP AT ONCE AND CONSULT YOUR DOCTOR.
Begin each workout with a warm up session - a few minutes of stretching to help prevent strains, pulls and cramps:
1. Get onto the treadmill, using the handrails for support, and place your feet on the side rails. (Either side of the running mat)
2. Activate the treadmill. (Using the details found in the Operation Instructions)
3. The treadmill will start at the lowest speed, step onto the mat and walk at the same speed.
4. Continue the rest of your workout.
FINISHING YOUR WORKOUT
1. Turn the treadmill to the lowest speed and incline settings.
2. Using the handrails for support place your feet on the side rails. (Either side of the running mat)
3. Stop the treadmill.
4. Turn the treadmill o
5. Remove the safety key.
6. If necessary, wipe the treadmill down with a damp cloth.
7. End each workout with a cool down session - a few minutes of stretching to help prevent strains, pulls and cramps.
main power switch and remove the plug from the electrical outlet.
CORRECT RUNNING FORM
• Run in the centre of the running mat.
• Keep your head up and look straight ahead.
• Shoulders should be square and level, don’t round your shoulder or swing them f
• Keep your torso straight with the chest up so there’s plenty of room for the diaphragm to move for proper breathing actions.
• Do not lean forwards, backwards or slouch, as all of these posture deviations can place a lot of stress on the lower back, interfering with proper running mechanics and possibly causing lower back injury.
• Feet should be pointed straight ahead and land directly under the hips.
orwards or backwards.
HOW LONG SHOULD I EXERCISE FOR?
That really depends on your current level of fitness. If you’re just starting out on a new exercise program, you should start gradually and build up - do not try to do too much too quickly. 30 minutes, 3 times a week should be enough. Don’t push yourself too hard - you should never feel exhausted during or following exercise.
Call for service 07 3272 7010
Page 25
Trouble Shooting
25
The following table details the most common problems and how to fix them. If you still have a problem after going through the troubleshooting guide please call your Paradigm distributor for advice.
ERROR
PROBLEM POSSIBLE CAUSES CORRECTION
CODE
The console has not received a signal from the speed sensor for
E1
15 seconds.
1. The console coult not obtain the incline value within a certain time.
E3 2. The incline
motor is working outside it’s limit.
1. Wiring jack has a poor connection.
2. There is too great a
distance between the
speed sensor and the
magnet on the front
roller pulley.
3. Sensor is faulty and/or wiring has
been damaged.
1. Data jack has a poor connection
2. Incline motor has been damaged.
3. Data cable has been damaged.
4. Controller board is burnt.
1. Re-insert the wiring jack and ensure that a firm connection is made.
2. Adjust the speed sensor so that it sits 3mm (+/- 1mm) from the magnet.
3. Replace the sensor.
1. Re-insert the wiring jack and ensure that a firm connection is made
2. Reset the height of the incline nut and restart the machine
3. Replace the incline motor
4. Replace the controller board.
PROBLEM CORRECTION E CAUSESLBISSOP
1. Not plugged in
2. Safety key not a
Treadmill will not start
Belt is slipping
Treadmill is noisy
Inaccurate pulse rate
3. Circuit breaker is tripped
4. On/o switch is not on
5. Auto shut down
1. Belt is loose
2. Deck needs lubrica
1. Loose hardware
2. Motor straining
3. Clicking sound - roller knocking
1. Too much hard movement
2. Palms too wet
3. Gripping too
4. Wearing rings
1. Plug into suitable outlet
ached correctly
med out
on
ght
2. Insert safety key
3. Reset circuit breaker
4. Turn on the switch
5. Re-plug electrical cord
1. Tighten walking belt
2. Lubricate the belt
1. Tighten visible hardwares
2. Check belt tension
3. Adjust real roller
1. Stand on side rails to obtain accurate pulse
2. Dry palms
3. Grip using moderate pressure
4. Remove all rings
Call for service 07 3272 7010
Page 26
Trouble Shooting
26
Reset Safety Switch after an electrical overload
1. Unplug the power cord from the treadmill
2. Push in the safety switch
3. Plug in the power cord into the treadmill
Call for service 07 3272 7010
Page 27
Warranty / Service
27
WARRANTY INFORMATION
PDG0035
Congratulations on your purchase!
This Pacer 2800 treadmill is warranted to be free from defects in material and workmanship under normal use and service conditions, Lifetime Frame, 10 Years Motor, 12 Months on all other parts, from the date of purchase. Evidence of unfair usage or incorrect adjustment by the owner will void this promise.
The benefits conferred by this manufacturer's warranty are in addition to all rights and remedies conveyed by the Competition and Consumer Act 2010 (Commonwealth), and any other statutory rights to which you may already be entitled, and this warranty does not exclude, restrict or modify any such rights or remedies that are implied by law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Conditions of Warranty
All warranty coverage extends only to the original retail purchaser from the date of purchase. Please keep your receipt, tax invoice or other proof of purchase.
This warranty does not extend to any damage to a product caused by abuse, improper or abnormal usage, or repairs not provided by us or our Service Centre. Nor does this warranty extend to products used for commercial or rental purposes. This warranty does not cover ordinary wear, tear and weathering, failure to follow directions, improper installation, improper maintenance or acts of God (such as damage caused by storms, lightning, heavy winds and by snow or ice).
Making A Warranty Claim
Direct your enquiries to our service centre. You can contact them on our 07 3272 7010 number or email to service@boylesfitness.com.au. Send mail to 1652 Ipswich Road Rocklea QLD 4106 – if mailing please include your contact details.
A service representative will then assist you in the appropriate action to be taken. For efficient processing of your enquiry please have proof of purchase, the date of purchase and the retailer name you purchased the item from, and the brand on the product. Photos of the product, and scans of receipts, may be requested to assist with your claim.
Call for service 07 3272 7010
Page 28
Warranty / Service
28
The service centre representative will assess the claim. If:
1) there is a minor fault, they can offer either a replacement spare part, replacement
unit, repair or other suitable remedy;
2) there is a major fault, they can offer a replacement, repair or suggest you return
to the store you purchased it from for a full refund.
Please note – a request for compensation will need documentary evidence of the
loss or damage suffered. It will also need to be evidenced that such a loss was a reasonably foreseeable result of a failure by Boyles Fitness to comply with a consumer guarantee under the Australian Consumer Law.
3) The product was damaged through abnormal use, no refund or repair can be
offered.
The sending of replacements, spare parts or the cost of repair carried out by the Service
Centre will be organized and covered by Boyles Fitness. If collection of the item is
required this will be organized by the Service Centre and at our expense. Do not return any products without authorization as this will be at your expense.
Our sales and service centre has been set up to provide assembly assistance, replacement parts and accessories, and to efficiently handle all warranty related matters. Please note upon receiving your warranty claim our Service Centre will send, via post or email, a repair and refurbished goods or parts notice.
SERVICE CENTRE Contact details and hours of operation.
Service No: 07 3272 7010
8:00am – 4:00pm Monday to Friday (excluding Public Holidays)
This product is warranted by Boyles Fitness Equipment Pty Ltd 130 Carrolls Road, Menangle NSW 2568, Phone 07 3272 7010
Call for service 07 3272 7010
Loading...