ParaBody GS1 GYM SYSTEM User manual
GS1 GYM SYSTEM
CLASS H
PART # 7597201
REV . A
USER’S GUIDE
1
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
V ersion: GS1-103
Revision: 07/30/03
j
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
Gym Layout.....................4
Parts list..........................5
Assembly Instructions.....6-20
General Maintenance.......21
W arranty Statement..........22
Product Services..............23
Insert-Registration Card
IMPORTANT SAFETY INFORMATION
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
NOTE: In a continual effort to improve our products, specifications are subject to change
2002 Life Fitness, a division of Brunswick Corporation. All rights reserved.
©
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
IMPORTANT NOTES
Please note:
* Thank you for purchasing the ParaBody GS1 Gym System. Please read these
instructions thoroughly and keep them for future reference.
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
T ools Required for Assembly
* Rubber mallet or hammer
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* 5/32” Allen wrench
* Adjustable wrench
* T ape measure
Bolt Length Ruler
NOTE: BOL T LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT .
BOLT LENGTH
BOL T LENGTH RULER:
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
3
6
1’
2’
3’
4’
5’
1’ 2’ 3’
4’
5’
6’
7’
8’
9’
6’
7’
1 Square = 1’ X 1’
Minimum Required Usable Space
Length = 82 inches (208.5 cm) 6’ 10”
Width = 71 inches (180.5 cm) 5’11”
Height = 83 inches (211 cm) 6’ 11”
Dimensions Including LP5 Leg Press (optional)
Length = 82 inches (208.5 cm) 6’ 10”
Width = 108 inches (180.5 cm) 9’ 0”
4
PARTS LIST
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
24
25
26
27
28
29
30
31
32
PART #
ACU04-1163
ACU04-1158
ACU02-1060
ACU04-1160
ACU04-1384
ACU04-1344
ACU04-1100
ACU04-1098
ACU04-1159
ACU04-1162
ACU04-1157
ACU02-1071
ACU07-0135
ACU01-1782
ACU6194601
ACU01-1783
ACU04-1099
ACU01-2009
ACU10-0204ASY
ACU13-0091-2
ACU13-0091-1
ACU7292501
ACU06-0024
ACU12-0041
ACU05-0193
ACUDA1E03813416NB
ACUDA1E03821216NB
ACUDA1E03830016NB
ACUDA1E03833416NB
ACUDA1E03883416NB
ACUDA1C01210413NB
DESCRIPTION
FRAME
BASE
BASE PLA TE
BOOM PLA TE LEFT
BOOM PLA TE RIGHT
FRAME BRACE
FOOT PLA TE
PRESS ARM
PRIMARY PIVOT
SEA T ADJUST
LEG PEDEST AL
PULLEY PLA TE
SEA T/BACK P AD
3/4 X 17” TUBE
4 X 7” ROLLER P AD
72-3/8” GUIDE ROD
LA T BAR
3/4 X 17-1/2” TUBE
HEAD PLA TE ASSY
LA T CABLE
LOW CABLE
WEIGHT PLA TE
3-1/2” PULLEY
ANKLE STRAP
CHAIN
3/8 X 1-3/4” BOL T
3/8 X 2-1/2” BOL T
3/8 X 3” BOL T
3/8 X 3-3/4” BOL T
3/8 X 8-3/4” BOL T
1/2 X 104mm BOL T
QTY
1
1
2
1
1
1
1
1
1
1
1
2
2
1
6
2
1
2
1
1
1
15
12
1
1
2
1
9
15
2
1
KEY
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
PART #
ACUDA1E01283413NB
ACUDB2E03811000B
ACUDB2E01208000B
ACUDC1250100020B
ACUDC126013020B
ACU04-1171
ACU06-0363
ACU05-0322
ACU08-0074
ACU08-0073
ACU08-0011
ACU05-0320
ACU04-1165
ACU06-0047
ACUDA1E03840016NB
ACU05-0212
ACU7308601
ACU11-0068
ACU11-0060
ACU06-0194
ACU05-0017
ACU05-0036
ACU06-0357
ACU05-0311
ACUDI1080080U
ACUDB2E01212000B
ACU04-0622
DESCRIPTION
1/2 X 8-3/4” BOL T
3/8” LOCK NUT
1/2” LOW HT LOCK NUT
3/8” FLA T WASHER
1/2” FLA T WASHER
3-1/2 CABLE GUARD
3/4” PLASTIC W ASHER
3/4 X 4” SHAFT
3/8 X 3/4” FLANGE SP ACER
3/8 X 1-1/16” FLANGE SP ACER
3/8 X 1” LG SP ACER
3/8 X 1-1/2” LG SP ACER
WEIGHT ST ACK SP ACER
WEIGHT ST ACK CUSHION
3/8 X 4” BOL T
SHAFT COLLAR
WEIGHT ST ACK LABEL
T -HANDLE SPRING PIN
WEIGHT SELECTOR PIN
ST AR KNOB 3/8
ADJUST ABLE GLIDE
ST ARLOCK COLLAR
RH CAP
1/2” RH CAP HOLDER WSHER
SNAP LINK
1/2” LOCK NUT
LOW ROW BAR
QTY
1
26
1
22
2
2
4
1
2
8
4
4
2
2
2
2
1
1
1
1
1
6
2
2
3
1
1
NOTE: SOME OF THE P AR TS LISTED MAY BE PRE-INSTALLED
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
5
6
36
3/8 X 4
3/8 X 3-3/4
29
7
30
47
2
1
34
3/8 X 2-1/228
29
3/8 X 3
6
3
34
34
FIGURE 1
STEP 1:
• LOOSELY assemble two BASE PLATES (3) to the FRAME (1) and BASE (2) using four 3/8 X 3-3/4” BOLTS (30)
and four 3/8” LOCK NUTS (34). See FIGURE 1.
• LOOSELY assemble the FOOTPLATE (7) to the lower holes in the FRAME (1) using one 3/8 x 3” BOLT (29) and one
3/8 LOCKNUT (34)
• LOOSELY assemble the TOP of FRAME BRACE (6) to the FRAME (1) using two 3/8 x 4” BOLT (47), two 3/8 WASHERS
(36) and two 3/8 LOCKNUTS (34) Assemble BOTTOM of FRAME BRACE (6) to FRAME (2) using one 3/8 x 2-1/2” BOLT
(28), one 3/8 x 3 (29), three 3/8 WASHERS (36) and one 3/8 LOCKNUT (34)
6
FIGURE 2
• CHECK THA T THE HEADPLA TE AND WEIGHT PLATES ARE ASSEMBLED AS SHOWN IN FIGURES 2 & 3
FIGURE 3
7
Loading...