Panasonic WX-LT310, WX-LZ110, WX-LZ10, WX-LP100, WX-LT100 User Manual

Ideal for classrooms, lecture rooms, and conference rooms!

Infrared Wireless

Powered Speaker Kit

Infrared Wireless Powered Speaker

WX-LP100

Infrared Wireless Microphone

(Pendant Type) WX-LT310

Infrared Wireless Microphone

(Hand Held Type) WX-LT100

All-in-one portable speaker instantly creates

an environment where everyone can concentrate

The Panasonic WX-LP100 Infrared Wireless Powered Speaker incorporates 2ch infrared receiver, infrared sensor,

amplifier and speaker in its compact unit. With high quality sound and versatile multimedia capability,

the WX-LP100 changes teaching, learning and presenting environment all at once. It is an advanced educational

and business tool made possible by Panasonic’s world renowned audio technology.

Plug and Play

Plug in the WX-LP100 to power Infrared Wireless Powered Speaker Kit with versatile multimedia capability. 2 microphones and 2 multimedia inputs can be used at a time.

With an external input terminal, the microphone can transmit an audio signal from any multimedia source to the WX-LP100. (The microphone cannot be

used when connected to an external input.)

Benefits

School • Improves classroom management

Laptop

CD Player

MP3 Player

Laptop CD Player MP3 Player

• Increases students’ interest and zeal

• Helps students achieve better results

• Reduces stress on small voice students and on whom trying to hear them

Easy to carry

With compact, lightweight and rugged design, the WX-LP100 can be placed wherever you like.

Easy to use

The power ON/OFF and 4 volume controls including 2 microphones and 2 multimedia inputs can easily be made on the front panel. Plus, the pendant type microphone WX-LT310 is equipped with volume control buttons for own/other microphone and any multimedia source.

Business • High privacy by infrared wireless technology

to prevent interception

•

Increases concentration and reduces voice fatigue

• Providing both hands free is so convenient

• No need for costly mounting or installation

Key Features (WX-LP100)

• Integrated dual channel infrared wireless receiver

• 2 audio multimedia inputs

•

Remote control of wireless microphones and multimedia sources

• Wide horizontal dispersion for even coverage

•

Compact, lightweight and rugged design for flexible placement

• Interference/interception-free made possible by infrared wireless technology

• Front panel controls for easy access

• Adjustable output for recording

• Adjustable output for assistive listening devices

Specifications (WX-LP100)

Amplifier/Receiver Unit

Power Source 24 V DC (Using the attached AC adaptor unit) Power Consumption 450 mA Infrared Sensor Input 75 Ω F type connector (with Sensor WX-LS100) Output power for Sensor: 22 V DC, 100 mA Max. Receiving Channel Ch1: 2.3 MHz, Ch2: 2.8 MHz (Sub Carrier Frequencies) Receiving System TRF (Tuned Radio Frequency) Squelch Level 24 dBµV (including Sensor) Tone Squelch Frequency 32.768 kHz Line Input 1, 2

Line Output 0 dBV, unbalanced, ø3.5 mini jack

Volume Control* changeable microphone volume by the 2 dB step

Speaker Type 12 cm Full Range Bass Reflex Rated Output 6.3 W (4 Ω), Max: 10 W (4 Ω) SPL 93 dB SPL, 1 m, 1 W Distortion Less than 1 % Frequency Response 100 Hz ~ 15 kHz (Line input ~ Speaker output) Operating Temperature +5 °C ~ +35 °C Dimensions 187 (W) x 309 mm (H) x 209 mm (D) Weight approx. 3.7 kg Finish AV medium gray ABS resin (similar to Munsell N7) * Volume controllable Microphone: WX-LT310

Infrared Sensor (attached)

Power Source 22 V DC (supplied from Amplifier/Receiver unit) Power Consumption 20 mA Infrared Ray Wavelength 850 nm Sensor Output 75 Ω F type connector Receiving Channel Ch1: 2.3 MHz, Ch2: 2.8 MHz (Sub Carrier Frequencies) Dimensions Max. ø113.5 mm x 34.5 mm (H)

Weight approx. 0.2 kg Finish Black color / Infrared ray transmission acrylic resin

12 dBV, unbalanced, ø3.5 mini jack

(L and R mixing for stereo input)

(Monaural audio output for L and R)

16 dB) (Reset by power OFF/ON)

(+6 dB ~

(excluding a projection for F type connector)

Part Names and Functions (WX-LP100)

Front Panel

OPERATE MIC 1 Volume Control MIC 2 Volume Control LINE 1 Volume Control LINE 2 Volume Control

Rear Panel

Sensor Input Line Input 2 Line Input 1 Line Output Line Output Volume Control

Appearance (WX-LP100)

20965244

187

Unit: mm

Infrared Wireless Powered Speaker Kit Optional Accessory

Infrared Wireless Powered Speaker

WX-LP100

All-in one portable speaker incorporating 2ch receiver, sensor, amplifier and speaker.

Important

– Safety Precaution: carefully read the operating instructions and installation manual before using this product.

Infrared Wireless Microphone (Pendant Type)

WX-LT310

Hands-free pendant-style. Equipped with volume control buttons. Ideal for teachers’ or presenters’ use.

* Shipped with strap attached.

Infrared Wireless Microphone (Hand Held Type)

WX-LT100

Light weight, simple and basic design. Ideal for students’ or audiences’ use.

Battery Charger

WX-LZ110

Direct connection. Allows simultaneous charging of two microphones. Can also serve as power cord for the charger stand.

• All TV pictures are simulated.

• Weights and dimensions are approximate.

• Specifications are subject to change without notice.

• These products may be subject to export control regulations.

Charger Stand

WX-LZ10

Can charge batteries in approx. seven hours. Two microphones can be charged at the same time.

* Comes with two WX-LT100 adaptors. Photo shows adaptor attached on left side.

Microphones; option

DISTRIBUTED BY:

http://panasonic.net/pss/irw/

Printed in Japan (1N-790)