Panasonic WV-CS580/G, WV-CS584E Installation Manual
Installation Guide
Color CCTV Camera
Model No. WV-CS580/G
WV-CS584E
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
We declare under our sole responsibility that the product to which
this declaration relates is in conformity with the standards or other
normative documents following the provisions of Directives
2006/95/EC and 2004/108/EC.
Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das
sich diese Erklärung bezieht, mit den folgenden Normen oder
normativen Dokumenten übereinstimmt. Gemäß den
Bestimmungen der Richtlinie 2006/95/EC und 2004/108/EC.
Nous déclarons sous notre propre responsabilité que le produit
auquel se réfère la présente déclaration est conforme aux normes
spécifiées ou à tout autre document normatif conformément aux
dispositions des directives 2006/95/CE et 2004/108/CE.
Nosotros declaramos bajo nuestra única responsabilidad que el
producto a que hace referencia esta declaración está conforme
con las normas u otros documentos normativos siguiendo las
estipulaciones de las directivas 2006/95/CE y 2004/108/CE.
Noi dichiariamo sotto nostra esclusiva responsabilità che il
prodotto a cui si riferisce la presente dichiarazione risulta conforme
ai seguenti standard o altri documenti normativi conformi alle
disposizioni delle direttive 2006/95/CE e 2004/108/CE.
WARNING:
• This apparatus must be earthed.
• Apparatus shall be connected to a mains socket outlet with
a protective earthing connection.
• The mains plug or an appliance coupler shall remain readily
operable.
• To prevent fire or electric shock hazard, do not expose this
apparatus to rain or moisture.
• The apparatus should not be exposed to dripping or
splashing and that no objects filled with liquids, such as
vases, should be placed on the apparatus.
• All work related to the installation of this product should be
made by qualified service personnel or system installers.
• For PERMANENTLY CONNECTED APPARATUS provided
neither with an all-pole MAINS SWITCH nor an all-all pole
circuit breaker, the installation shall be carried out in accordance with all applicable installation rules.
• The connections should comply with local electrical code.
• To prevent injury, this apparatus must be securely attached
to the floor/wall/ceiling in accordance with the installation
instructions.
Wij verklaren als enige aansprakelijke, dat het product waarop
deze verklaring betrekking heeft, voldoet aan de volgende
normen of andere normatieve documenten, overeenkomstig de
bepalingen van Richtlijnen 2006/95/EC en 2004/108/EC.
Vi erklærer os eneansvarlige for, at dette produkt, som denne
deklaration omhandler, er i overensstemmelse med standarder
eller andre normative dokumenter i følge bestemmelserne i
direktivene 2006/95/EC og 2004/108/EC.
Vi deklarerar härmed vårt fulla ansvar för att den produkt till vilken
denna deklaration hänvisar är i överensstämmelse med de
standarder eller andra normativa dokument som framställs i
direktiv nr 2006/95/EC och 2004/108/EC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä
ilmoitus koskee, noudattaa seuraavia standardeja tai muita
ohjeellisia asiakirjoja, jotka noudattavat direktiivien 2006/95/EC ja
2004/108/EC säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som denne
erklæringen gjelder for, er i overensstemmelse med følgende
normer eller andre normgivende dokumenter som følger
bestemmelsene i direktivene 2006/95/EC og 2004/108/EC.
CAUTION:
An ALL-POLE MAINS SWITCH with a contact separation
•
of at least 3 mm in each pole shall be incorporated in
the electrical installation of the building.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Turn the power off at the mains to disconnect the main
power for all unit.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING
TEXT CAREFULLY.
WARNING: This apparatus must be earthed.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code.
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
The wire which is coloured green-and-yellow must be
connected to the terminal in the plug which is marked with
the letter E or by the earth symbol
green-and-yellow.
The wire which is coloured blue must be connected to the
terminal in the plug which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to
the terminal in the plug which is marked with the letter L or
coloured red.
or coloured green or
2
Contents
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Limitation of liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Disclaimer of warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About the user manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Trademarks and registered trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Precautions for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Major operating controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
DIP switch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Communication Parameters (DIP Switch 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Unit Number (DIP Switch 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
RS485 Communication Parameters (DIP Switch 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Camera Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Preparing the Camera and Decorative Cover for Side Cable Exit. . . . . . . . . . . . . . . . . . 17
Installing the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Uninstalling the Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Removing the Decorative Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Uninstalling the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Standard accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3
Important safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
S3125A
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
4
Limitation of liability
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES
ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION
AND/OR THE CORRESPONDING PRODUCT (S).
Disclaimer of warranty
IN NO EVENT SHALL Panasonic System Networks Co., Ltd.BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT
FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT
LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL,
CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE
USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;
(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR
CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM
COMBINED BY THE DEVICES OF THIRD PARTY;
(6) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC
SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-CAMERA'S PICTURE,
INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE;
(7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE.
Preface
This color CCTV camera is a video surveillance device that incorporates a ¼-type CCD, a 36x zoom lens, preset and
pan and tilt capabilities in a dome configuration.
5
Features
Super Dynamic 6 (SUPER-D6)
SUPER-D6 can capture clear images of subjects
whose illumination is extremely different.
New DSP for high sensitivity
A new noise reduction system lowers minimum illuminance to 0.5 lx in the color mode and 0.04 lx in the
black-and-white mode.
Auto night time switching to blackand-white mode
The camera can be configured to switch to the blackand-white mode automatically under low light conditions for clear images, even at night.
Digital flip
Normally, a camera needs to stop when it points
straight down during a tilt operation. With digital flip,
however, the camera is able to tilt from 0° to 180° in a
single motion. This makes it possible to track subjects
passing directly under the camera more smoothly.
Privacy zone function
The privacy zone function can mask specific areas of
the scene from view.
Patrol function
The patrol function can store manual camera movement routines for automatic playback. For example,
you can set the camera the movements of the people
to be monitored, by replaying the stored parameters
complicated movements are done automatically.
Camera position memory
The system can be configured with up to 256 camera
positions. A particular camera position can be selected
and viewed by entering the applicable preset number
on the system controller 10-key pad.
Motion detection
The system can be configured so any motion on the
monitor screen during surveillance causes output of an
alarm signal.
Digital Flip Operation
Tilting
downwards.
Digital flip is performed only when the system controller joystick is held downwards.
The picture is flipped
when the camera is
pointing straight down
(at around 135°).
Tilting upwards.
About the user manuals
The operating instructions of the camera consist of 2
sets: this book and operating instructions (PDF).
This book explains how to install the camera.
Refer to the "Operating Instructions (PDF)" on the provided CD-ROM for descriptions of how to perform the
unit settings. Adobe
When the Adobe
download the latest Adobe
web site and install it.
Trademarks and registered trademarks
Adobe and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
®
Reader® is required to read PDF.
®
Reader® is not installed on the PC,
®
Reader® from the Adobe
6
Precautions
The following points as well as the contents of "Warning"
and "Caution" shall be observed.
Refer installation work to the dealer.
Installation work requires technique and experiences.
Otherwise injury, or damage to this product may result.
Be sure to consult the dealer.
Do not insert any foreign objects.
This could permanetly damage this product. Turn the
power off immediately and contact qualified service
personnel for service.
Do not attempt to disassemble or modify this
product.
Failure to observe this may cause fi re or electric shock.
Consult the dealer for the repair or inspections.
Stop operation immediately when something is
wrong with this product.
When smoke goes up from this product or the smell
of smoke comes from this product, continued use will
result in fi re, injury, or damage to the product.
Turn the power off immediately and contact qualified
service personnel for service.
Do not damage the power cable.
Do not damage, fabricate, twist, stretch, bundle, or
forcibly bend the power cable. Do not place heavy
objects. Keep away from heat sources.
Use of the damaged power cable may cause electric
shock, short circuit, or fi re.
Consult the dealer for repair.
This product shall be installed in a vibration-free
place.
Failure to observe this may cause screws and bolts to
be loosened and consequently to fall resulting in injury.
Install this product high enough to ensure that
people don't hit their heads.
Failure to observe this may cause a drop resulting in
injury or accidents.
Do not strike or give a strong shock to this product.
Failure to observe this may cause injury or fi re.
Turn the power off when do wiring of this product.
Failure to observe this may cause electric shock. In
addition, short circuit or wrong wiring may cause fi re.
Select an installation area that can support the total
weight.
Selecting an inappropriate installation surface may
cause the product to fall down or topple over, resulting
in injury.
Installation work shall be started after sufficient
reinforcement.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause the
product to fall down resulting in injury or accidents.
Consult the dealer for the inspections.
The measures of protection against a fall of this
product shall be taken.
Failure to observe this may cause a drop resulting in
injury or accidents.
Do not touch the main body while this product is
panning/tilting.
Fingers may be caught up in the moving part, and that
may result in injury.
Do not use this product in an atmosphere of
fl ammable gases.
Failure to observe this may cause injury by explosion.
Avoid installing this product in locations where it is
subject to damage by salt or corrosive gas.
Otherwise the mounting fi xtures will deteriorate, causing
the product to fall down and leading to accidents.
Use the specifi ed mount bracket.
Failure to observe this may cause a drop resulting in
injury or accidents.
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
Tighten screws and mounting fi xtures to the
specifi ed torque.
Failure to observe this may cause a drop resulting in
injury or accidents.
7
[Precautions for use]
This product has no power switch.
When turning off the power, turn off a circuit breaker.
To keep on using with stable performance
Parts of this product may deteriorate and it may shorten
the lifetime of this product when using in locations subject
to high temperatures and high humidity.
Do not expose this product to direct heat sources such
as a heater.
Handle this product with care.
Do not drop this product, nor apply shock or vibration
to this product.
Failure to observe this may cause trouble.
About the self-diagnosis function
When this product malfunctions due to exogenous
noise, etc. for 30 seconds or more, the product will
automatically reset and will return to normal state. When
the product is reset, initialization will be carried out
as when the power of the product is turned on. When
the product repeatedly resets, exogenous noise level
around the product may be high and that may cause
malfunction. Contact your dealer for instructions.
Lens and pan/tilt head
If a lens and pan/tilt head are not performed for a long
period of time, the grease coating inside these parts
may become sticky. That may obstruct the parts from
moving. To prevent this, move the lens or pan/tilt head
periodically. Or perform position refresh periodically.
Do not touch the dome cover with your bare hands.
A dirty dome cover causes deterioration of picture
quality.
Discoloration on the CCD color fi lter
When continuously shooting a bright light source
such as a spotlight, the color filter of the CCD may
have deteriorated and it may cause discoloration.
Even when changing the fi xed shooting direction after
continuously shooting a spotlight for a certain period,
the discoloration may remain.
Do not aim this product at strong light sources.
A light source such as a spot light causes a blooming
(light bleeding) or a smear (vertical lines).
Smear Bright subject
About the position refresh function
Noise may be produced or the preset positions may
become inaccurate after a long operation.
Execute the "REFRESH" operation periodically, the
camera position will be corrected, and it is also
recommended to clean the slip ring of the camera.
Refer to the operating instructions (PDF) for further
information.
Consumable parts
The following are consumables: Replace them in
accordance with their lives. Their lives vary depending
on use environment and conditions.
Lens unit, slip ring: Approx. 3.7 million operations
(Lifetime around 20000 hours is just an indication when
using the camera at +35 °C.)
Synchronous mode setting
Image synchronous mode of this camera indicates
internal synchronization (INT) only. Set the multiplex
vertical driver (VD2) as OFF when the camera is
connected to the system controller of the company.
Blooming
Cleaning this product body
Turn the power off when cleaning this product. Do
not use strong abrasive detergent when cleaning this
product. Otherwise, it may cause discoloration.
8
Precautions for installation
The following points as well as the contents of
"Warning" and "Caution" shall be observed.
Panasonic assumes no responsibility for injuries or
property damage resulting from failures arising out
of improper installation or operation inconsistent
with this documentation.
Installation work shall be performed in accordance with
the technology standard of the electric installation.
Camera Installation Location
• Install the camera on a ceiling (concrete, etc.) at a
location that is suffi ciently strong to support it.
• When installing the camera on a ceiling of
insufficient strength (like a drop ceiling), use the
optionally available WV-Q105 Direct Attachment
Ceiling Mounting Bracket or the WV-Q126
Embedded Ceiling Mount Bracket.
• For ceiling mounting, use the optionally available
WV-Q117 Ceiling Mount Bracket.
• For wall mounting, use the optionally available
WV-Q118 Wall Mount Bracket.
This product is an indoor camera. It is not designed
for outdoor use.
This product is designed for use in a hanging configuration only. Using it in an upright or inclined
configuration can cause malfunction and shorten
the life of the camera.
Install this product in a horizontal configuration,
with the dome pointed downwards.
Avoid installing this product in the following locations.
• Areas directly exposed to rain and water
• Near a swimming pool or other areas where
chemicals are used
• Food preparation areas and other locations where
there are large amounts of steam vapour and oil, in
fl ammable atmospheres, other special environments
• Areas where radiation, X-rays, strong electric waves,
or magnetism is generated
• At sea, in coastal areas, or in areas where corrosive
gas is being generated
• Areas outside of the allowable ambient operating
temperature range (-10 °C to +50 °C)
• In a motor vehicle, on a boat, or other areas subject
to strong vibration (This camera is not designed for
use in a vehicle.)
• Near an air conditioner outlet, near a door that
opens up to the outdoors, or any other area
subjected to temperature extremes (Such conditions
can cause clouding and condensation formation on
the dome cover.)
When wiring this product, its cables (power, video
output, RS485, alarm in, alarm out) can exit out the
side or the top of this product.
• When using the top cable exit confi guration, drill a
hole in the ceiling to allow passage of the cables.
(See step 3 on page 17.)
• When using the side cable exit configuration,
prepare the cut-out in the die cast case and
decorative cover. (See “Preparing the Camera and
Decorative Cover for Side Cable Exit” on page 17.)
Avoid installing this product in a place with a high
level of noise.
Installation near an air conditioner, an air cleaner, a
vending machine, or the like causes noise.
Remove the cover film from the dome section of the
dome cover after the installation is complete.
Be sure to remove this product if it is not in use.
Keep this product cable away from the lighting cable.
Conduct the power distribution work to keep a distance
of 1 m or more from the 220 V - 240 V power line. Or
conduct the electric conduit work separately.
Failure to observe this may cause noise.
Radio interference
When this product is used near TV/radio antenna,
strong electric fi eld or magnetic fi eld (near a motor or a
transformer), images may be distorted and noise sound
may be produced. In such a case, run the camera
cable through specialized steel conduit tubes.
Locally procure the screws
Screws are not supplied with this product. Prepare the
screws according to the material, structure, strength
and other factors of the mounting area and the total
weight of objects to be mounted.
Beware of high humidity.
If the camera is installed when humidity is very high,
moisture may collect in the camera and cause the dome
to become foggy. If the dome becomes foggy, remove
it when the humidity is low and eliminate the moisture
inside the camera, and then replace the dome.
9
Screw tightening
The screws and bolts must be tightened with an
appropriate tightening torque according to the
material and strength of the installation area.
Do not use an impact driver. Failure to observe
this may cause overtightening and consequently
damage to the screws.
When a screw is tightened, make the screw at a right
angle to the surface. After tightening the screws or
bolts, perform visual check to ensure tightening is
enough and there is no backlash.
When the screw is not needed, it should be removed
and stored in an appropriate location.
Note:
• If needed, please complete grounding before
connecting the power plug. Likewise, the power
plug should be unplugged before ending the
grounding.
• The camera does not have a power switch. The
camera will turn on automatically when the power
cord is attached to the main lead. After starting,
the self-cleaning function will be automatically
activated, as will the pan, tilt, zoom and focus
actions.
Check before connection
Compatibility of devices are restricted. Before
connections, check the ratings and dimensions of the
devices to be used.
Contact your dealer for details.
Important hints to help with the installation
A self-cleaning function is activated (PAN/TILT/ ZOOM/
FOCUS) when this product is turned on.
Heat radiation
The surface of this product radiates heat. Ventilation
holes should be provided when installing the camera in
an enclosed ceiling or confi ned location where heat can
build up.
Ventilation holes
10
Loading...