WJ-RT416K
16CH Real-Time MPEG-4 Digital Disk Recorder
Version 1.5
WJ-RT416 Series
WJ-RT416 (120 V AC)
<With 1x 250GB HDD>
WJ-RT416K (120 V AC)
<Without HDD>
WJ-RT416V (120 V AC)
<With DVD drive, 1x 250GB HDD>
WJ-RT416VK (120 V AC)
<With DVD drive, without HDD>
WJ-RT416 (220 ~ 240 V AC)
<With 1x 250GB HDD>
WJ-RT416K (220 ~ 240 V AC)
<Without HDD>
WJ-RT416V (220 ~ 240 V AC)
<With DVD drive, 1x 250GB HDD>
WJ-RT416VK (220 ~ 240 V AC)
<With DVD drive, without HDD>
16CH Real-Time MPEG-4 Digital Disk Recorder supporting 480 ips (NTSC) / 400 ips (PAL)
Key Features
• Equipped with 8 Dual Core Encoders, all 16 cameras can be
recorded at 30 ips (NTSC) / 25 ips (PAL) per channel.
•
MPEG-4: High quality and high compression technology for economical recording
•
Supports multiplexed video and control data over the coax (4ch default, additional
4ch by optional board WV-PB4164) and RS-485 camera control (channel 1 ~ 16)
•
Panasonic Camera Control: Pan/Tilt, Zoom, Focus, Iris, Preset Position, Auto mode (depends
on the camera model) with a system controller, the monitoring software or the web browser.
• Various Recording Modes: Manual, Timer, Event (Pre/Post)
•
Flexible Recording/Playback Controls: REC, PLAY, Pause, Stop, FF,
REW, Prev Record, Next Record
• Various Display Modes: 4 / 6 / 9 / 16 split screen display (Live)
• 16 alarm inputs and 4 alarm outputs
• Synchronized audio recording for 16 channels
•
Direct Search and List Search (Time & Date, Event Type, Camera number)
• Alarm notification via e-mail
• Three user levels: Manager, Operator and Viewer
Camera partitioning setting can be applied to each user level.
•
VMD (Video Motion Detector): Mask area: 24 x 20, Sensitivity: 01 ~ 99
•
Recorded image data can be copied to CD-R, DVD-R, DVD+R, USB memory (FAT32),
USB HDD (FAT32) via COPY interface (Specified model only) or DVD-R, CD-R via
internal DVD drive (WJ-RT416V), Viewer software can be included when copying.
•
Equipped with 6 HDD slots (5 HDD slots and 1 DVD drive for V models)
• HDD Safety Mode to protect HDDs during installation
•
Optional WV-CU650 or WV-CU950 system controllers can be connected (RS-485). Playback
speed can be controlled by Jog/Shuttle. Direct camera preset position program is also available.
•
Integration capability with System150*
to System150/650 can control WJ-RT416. Cameras connected to System150/650 can
be controlled from the monitoring software (RT4Client) or the web browser.
•
Built-in network interfaces (10Base-T / 100Base-TX) for remote monitoring and operation
• Multi-recorder, Multi-site system can be made with the provided
monitoring software (RT4Client).
•
Recorded video and audio data can be downloaded to the client PC
with the monitoring software (RT4Client) or the web browser.
Downloaded images can be played by the viewer software (RT4Viewer).
•
The viewer software (RT4Viewer) can convert recorded audio and video
data into Windows® Media-format, and also can extract audio to wav file.
•
Up to 16 network clients can monitor live spot images (total network video stream is 16,
Refresh rate depends on the number of streams, recording mode and playback mode).
• Up to 4 playback streams can be sent to the network.
• Selectable Unicast/Multicast for efficient network utilization
*1 System150 version 2.2 or later *2 System650 version 3.0 or later
1
or System650*2: System controllers connected
Standard Accessories
• CD-ROM* ...................................... 1 pc.
• Installation Guide .......................... 1 pc.
* The followings are included on the CD-ROM.
•
Operating instructions of the monitoring software (PDF)
•
Monitoring software (RT4Client, including the viewer software)
Optional Accessory
4CH Camera Control Board
WV-PB4164
Part Names and Functions
Front View
Error Indicator
Alarm Indicator
Timer Indicator
Operate Indicator
HDD Access Indicators
Sequence Button
Multi-screen Button
Alarm Reset Button
Rear View
Audio Output Connector
AUX Input Connector
Monitor 1 Connector
Serial Terminal
Monitor 2 Terminal
RS-485 Port
Data Port
The followings are for installation.
• Power cable (for NTSC model) ..... 1 pc.
• Power cable (for PAL model) ..... 2 pcs.
HDD mounting screws, sleeves, dampers
•
• Rack mounting brackets ............. 2 pcs.
Fixing screw for rack mounting brackets
•
Camera Selection Buttons
Setup Button
Search Button
Copy Button
Arrow Button
Escape Button
Set Button
Stop Button
Mode Switch
Network Port
Copy 1 Port
Audio Input/
Alarm Output Terminal
Alarm Input/
Control Terminal
... 8 pcs.
COPY2
Inside the cover
Play/Pause Button
Record/Record Stop Button
Fast Reverse Playback Button
Fast Forward Playback Button
Skip Buttons
Copy 2 Port
Internal CD/DVD drive
(Only for the WJ-RT416V)
Audio Input Connectors
Signal Ground Terminal
Power Button
Cooling Fan
Power Cord Inlet
Video Input Connectors/
Video Output Connectors
Loading...