Panasonic WJ-NT304, WJ-NT314 User Manual

4CH MPEG-4/JPEG Video Encoder with Video Analytic

WJ-NT314

4CH MPEG-4/JPEG Video Encoder

WJ-NT304

WJ-NT314 (12 V DC, 120 V AC adapter attached) WJ-NT304 (12 V DC, 120 V AC adapter attached)

WJ-NT314 (12 V DC, 220 ~ 240 V AC adapter attached) WJ-NT304 (12 V DC, 220 ~ 240 V AC adapter attached)

4CH MPEG-4/JPEG dual streaming Video Encoder featuring 2CH Video Analytic

Key Features

• Up to 4 analog cameras can be connected.

•

MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips

• MPEG-4 and JPEG dual stream output for simultaneous live monitoring and high resolution recording

• Progressive output allows every frame to be clear even when the subject is moving.

• Video Analytic (WJ-NT314 only): 8 detection programs, each with three intruder detection areas and one object abandonment / removal detection area. Up to 8 detected objects per channel can be traced. Depth correction allows more accurate detection when the scene includes deeper depth.

• Panasonic camera control: Pan / Tilt / Zoom / Focus / Iris / Preset position (up to 256), Auto mode, Setup menu. AUX, B/W ON/OFF/ Auto, Click centering

• Unit title display: Up to 20 alphanumeric characters on browser

• Camera title display: Up to 20 alphanumeric characters on browser

• SD memory card slot for alarm recording and backup upon network failure. Recorded data can be downloaded by using FTP command.

• Alarm sources including 2x AVMD (WJ-NT314 only), 4x Terminal inputs, 4x Camera alarms, 4x Video loss alarms and Panasonic alarm protocol can trigger actions including SD memory recording/FTP image transfer, E-mail notification, Alarm indication, Terminal output and Panasonic protocol output.

• Bi-directional audio (1CH)

• Built-in network interface (10Base-T / 100Base-TX)

• Multiscreen: Images from 16 cameras can be displayed in four separate Quad screens (JPEG only). 20 characters camera title is available for each camera.

(WJ-NT314)

• Alarm e-mail notification

• Max bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 2,048 / 4,096 / 6,144 kbps) combined with Total bit rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 / 8,192 / 16,384 kbps / Unlimited) allowing flexible network management.

• Supported protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, RTP and SNMP

• Multi-language capable by localization

• FTP client function enables periodic image data transfer or transfer upon alarm.

Standard Accessories

• Operating Instructions .................. 1 pc.

• Warranty card

(NTSC model only) ....................... 1 pc.

• CD-ROM* ..................................... 1 pc.

The following are for installation.

• AC adapter ................................... 1 pc.

Optional Accessories

EIA19-type Rack Mounting Bracket

WV-Q204/1S

(for mounting one WJ-NT314/NT304)

• Code label .................................... 1 pc.

• Power cord (NTSC model) ........... 1 pc.

• Power cord (PAL model) ............. 2 pcs.

* The CD-ROM contains the operating instructions (PDFs) and the setup tools (Panasonic IP setup software, etc.).

EIA19-type Rack Mounting Bracket

WV-Q204/2S

(for mounting two WJ-NT314/NT304)

Specifications

TV System Audio / Video Inputs 4x 1.0 V [p-p] / 75 Ω NTSC 4x 1.0 V [p-p] / 75 Ω PAL Video IF composite video inputs (BNC) composite video inputs (BNC)

Video Loop Through Output Audio Input 1x –10 dBv, 10 KΩ, Unbalanced, RCA Audio Output 1x –10 dBv, 600 Ω Unbalanced, RCA

Audio / Image Resolution JPEG: VGA (640 x 480) / QVGA (320 x 240), Video MPEG-4: VGA (640 x 480) / QVGA (320 x 240) Format Image Compression

Image Refresh Rate

Audio Compression G.726 (ADPCM), 16/32 kbps Bi-directional Method between PC and WJ-NT314. CH1 only.

Browser Camera Control GUI

Display Mode

Unit Title On the browser, Up to 20 Characters Camera Title On the browser, Up to 20 Characters Clock Display On the browser, Time: 12H/24H, Date: 5 formats Alarm Control Reset Audio OFF / Mic input / Audio output / Interactive GUI Language English (Localization capable) Setup Menu Language English (Localization capable) System Log Approx. 100 (Internal), Approx. 4,000 (SD memory) error logs Supported OS Microsoft

Supported Browser

Video

Detection Channels Two channels at a time

Analytic Detection Area Setup Three intruder detection areas and one object abandonment / (WJ-NT314 only) detection programs can be assigned across 4 camera channels

Sensitivity Sensitivity: Auto, Depth correction setup: Auto/Manual Display Mode Program ID: 20 characters,

Alarm Action Different preset positions can be called corresponding

Schedule

Alarm Alarm Source

Alarm Action SD memory recording/FTP image transfer, e-mail notification,

Network Network Interface 10 BASE-T / 100 BASE-TX, RJ-45 Connector

Maximum Band Width Total 32 Mbps Total Bit Rate Control Max Bit Rate / Client (MPEG-4) Audio Transmission Mode Supported Protocol TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DHCP, DNS,

FTP Client Periodic image transfer: Interval 5 sec ~ 24 H,

No. of Simultaneous Users

SD Memory Card Alarm REC / Backup upon network failure. Compatible SD card: (Option) E-mail Upon Alarm or Warning, Up to 4 addresses User Registration Up to 16 users User/Host Level 3 Levels: Administrator, Camera control, Live only Security Measures User authentication (ID 32 digit, PW 32 digit),

External IF

Alarm 4x Input (Make contact),

Control 1x AUX output, 1x Time adjustment input RS-485 port 1x RS-485 (RJ-11), 4 wire, full/Half duplex,

General Safety / EMC standard UL (6500 Edition2), Specifications

Power Source and 12 V DC 1.0 A (120 V AC Power Consumption 60 Hz adapter provided) 50 Hz adapter provided) Ambient Operating Temperature Ambient Operating Humidity Dimensions 210 mm x 44 mm x 307 mm (8-1/4" x 1-3/4" x 12-1/16")

* GOST: WJ-NT304 only

Weight (approx.) 2.0 kg (4.4 lbs.)

NTSC PAL

Multiplexed control data and cable Multiplexed control data and cable compensation compatible: 1 ~ 4 CH compensation compatible: 1 ~ 4 CH Active loop through outputs: 1 ~ 4 CH

MPEG-4: Image quality: 3 steps, Transmission type: UNICAST/MULTICAST JPEG: Image quality: 10 steps, Transmission type: PULL/PUSH

0.1 ips ~ 30 ips 0.1 ips ~ 25 ips (30 ips is performed with input from one (25 ips is performed with input from one camera. Frame rate of JPEG display camera. Frame rate of JPEG display will be limited when displaying JPEG will be limited when displaying JPEG and MPEG-4 simultaneously) and MPEG-4 simultaneously)

Pan / Tilt / Zoom / Focus / Iris / Preset position (up to 256), Auto mode, Setup menu. AUX, B/W ON/OFF/Auto, Click centering Spot, Quad: Image from 16 cameras can be displayed in 4 different Quad screens (JPEG only). 20 characters camera title available.

Windows® XP Professional/Home SP2

Windows Vista Professional/Home

Microsoft Microsoft®

Internet Explorer®

Microsoft

removal detection area per program (Polygonal areas). Up to 8

each with 256 preset positions. One mask area per program.

Tracking display: ON/OFF, Frame display: ON/OFF

to the 8 detection programs. Individual schedule/program, One time zone per each day of the week 2x AVMD (WJ-NT314 only), 4x Terminal inputs, 4x Camera alarms, 4x Video loss alarms, Panasonic alarm protocol

Indication on browser, Camera positioning, Terminal output, Panasonic protocol output

64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 / 8,192 / 16,384 kbps / Unlimited 64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 / 6,144 kbps OFF / Mic input / Audio output / Interactive (Half duplex)

DDNS, NTP, SNMP

Alarm image transfer: 0.1 ~ 1.0 ips, 1 ~ 5,000 images

Up to 8 users/channel, Up to 16 users/unit

(Depends on network conditions)

Panasonic 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB model

Host authentication (IP address)

4x Output (Open collector, Latch / Pulse, N.O. / N.C.)

Supports UDP-Serial conversion

FCC (Part15 ClassA), GOST (R 51558)* C-UL (E60065), DOC (ICES003 ClassA)

–10 °C ~ +50 °C (14 °F ~ 122 °F) 90 % or less (without condensation)

6.0 SP2

7.0

CE (EN55022, EN55024, ClassB),

12 V DC 1.0 A (220 ~ 240 V AC

Part Names and Functions

Front View

Rear View

Operation Indicator Status Indicators Reset Button Dip Switch SD Memory Card Slot SD Memory Card Error Indicator Serial Port Video Input Connectors Video Output Connectors

Audio Input Connector Audio Output Connector Connector Terminal 10/100 Base-T Port Signal Ground Terminal RS-485 Port Clamp DC 12 V Input Jack

Appearance

220(8-11/16")

47(1-7/8")

25(1") 9.5(3/8")

Trademarks and registered trademarks

–

Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.

Important

–

Safety Precaution: carefully read the operating instructions and installation manual before using this product. – Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network.

307(12-1/16")

300(11-13/16")

128(5-1/16")

7(1/4")

23(7/8")

32(1-1/4")

(Mounting Pitch)

3.6(1/8") 44(1-3/4")

480(18-7/8")

465(18-5/16")(Mounting Pitch)

210(8-1/4")

160(6-5/16")

• All TV pictures/menu are simulated.

• Weights and dimensions are approximate.

• Specifications are subject to change without notice.

• These products may be subject to export control regulations.

• Product pictures shown in this catalog are all NTSC models.

Unit: mm (inches)

DISTRIBUTED BY:

http://panasonic.co.jp/pss/cctv/en/

Printed in Japan (2A-015AL)