Panasonic VP4RA Users Guide

SECTION PAGE
SAFETY AND GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2
RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3
MEDIA MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4
PHONE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5
6
TABLE OF CONTENTS
1
2
3
4
5
6

SAFETY AND GENERAL INFORMATION

CONTENTS
m SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . .4
1
m SOFTWARE LICENSING INFORMATION . . . . . . . .7
Safe Usage Of The Uconnect System . . . . . . . . . . .4
Care And Maintenance . . . . . . . . . . . . . . . . . . . .5
m CYBERSECURITY . . . . . . . . . . . . . . . . . . . . . . . . .5
m GENERAL INFORMATION . . . . . . . . . . . . . . . . . .7
FCC/ISED Regulatory Notices . . . . . . . . . . . . . . .7
4 SAFETY AND GENERAL INFORMATION
SAFETY GUIDELINES
WARNING!
ALWAYS drive safely with your hands on the steer­ing wheel. You have full responsibility and assume all risks related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury or death.
Ensure that all persons read this manual carefully before using the system. It contains instructions on how to use the system in a safe and effective manner.
Do NOT attach any object to the touchscreen, doing so can result in damage to the touchscreen.
Please read and follow these safety precautions. Failure to do so may result in injury or property damage.
Glance at screen only when safe to do so. If prolonged viewing of the screen is required, park in a safe location and set the parking brake
Stop use immediately if a problem occurs. Failure to do so may cause injury or damage to the product. Return it to your authorized dealer to repair.
Ensure the volume level of the system is set to a level that still allows you to hear outside traffic and emer­gency vehicles.
Safe Usage Of The Uconnect System
Read all instructions in this manual carefully before using your system to ensure proper usage!
Your system is a sophisticated electronic device. Do not let young children use your system.
Permanent hearing loss may occur if you play your music or the system at loud volumes. Exercise caution when setting the volume on your system.
Keep drinks, rain and other sources of moisture away from your system. Besides damage to your system, moisture can cause electric shocks as with any electronic device.
NOTE: Many features of this system are speed dependent. For your own safety, it is not possible to use some of the touchscreen features while the vehicle is in motion.
Exposure To Radio Frequency Radiation
The internal wireless radio operates within guidelines found in radio frequency safety standards and recommen­dations, which reflect the consensus of the scientific com­munity. The radio manufacturer believes the internal wire­less radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones. However, the use of wireless radios may be restricted in some situations or environments, such as aboard airplanes. If you are unsure of restrictions, you are encouraged to ask for authorization before turning on the wireless radio.
Care And Maintenance
Touchscreen
SAFETY AND GENERAL INFORMATION 5
If necessary, use a lint-free cloth dampened with a cleaning solution, such as isopropyl alcohol or an iso­propyl alcohol and water solution ratio of 50:50. Be sure to follow the solvent manufacturer’s precautions and directions.
Disc Drive
Do not insert any damaged, warped, scratched or dirty Discs into the Disc Player.
Discs that have been modified with an adhesive label should not be used in the Disc Player.
Do not insert more than one Disc at a time into the drive slot.
1
Do not press the touchscreen with any hard or sharp objects (pen, USB stick, jewelry, etc.) which could scratch the touchscreen surface!
Do not spray any liquid or caustic chemicals directly on the screen! Use a clean and dry micro fiber lens cleaning cloth in order to clean the touchscreen.
CYBERSECURITY
Your vehicle may be a connected vehicle and may be equipped with both wired and wireless networks. These networks allow your vehicle to send and receive informa­tion. This information allows systems and features in your vehicle to function properly.
Your vehicle may be equipped with certain security fea­tures to reduce the risk of unauthorized and unlawful access to vehicle systems and wireless communications. Vehicle software technology continues to evolve over time
6 SAFETY AND GENERAL INFORMATION
and FCA US LLC, working with its suppliers, evaluates and takes appropriate steps as needed. Similar to a com­puter or other devices, your vehicle may require software updates to improve the usability and performance of your systems or to reduce the potential risk of unauthorized and unlawful access to your vehicle systems.
The risk of unauthorized and unlawful access to your vehicle systems may still exist, even if the most recent version of vehicle software (such as Uconnect software) is installed.
WARNING! (Continued)
ONLY insert media (e.g., USB, SD card, or CD) into your vehicle if it came from a trusted source. Media of unknown origin could possibly contain malicious software, and if installed in your vehicle, it may increase the possibility for vehicle systems to be breached.
As always, if you experience unusual vehicle behav­ior, take your vehicle to your nearest authorized dealer immediately.
WARNING!
It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving serious injury or death.
(Continued)
NOTE:
FCA or your dealer may contact you directly regarding software updates.
To help further improve vehicle security and minimize the potential risk of a security breach, vehicle owners should:
Routinely check www.driveuconnect.com/software-update
to learn
about available Uconnect software updates.
Only connect and use trusted media devices (e.g. personal mobile phones, USBs, CDs).
Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept infor­mation and private communications without your consent. For further information, refer to “Onboard Diagnostic System (OBD II) Cybersecurity” in your Owner’s Manual.
SOFTWARE LICENSING INFORMATION
For software licensing information, please visit: us.panasonic.com/automotive-notices
GENERAL INFORMATION
FCC/ISED Regulatory Notices
Modification Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Interference Statement
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Opera- tion is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
.
SAFETY AND GENERAL INFORMATION 7
Wireless Notice
This device complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Class B Digital Device Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm- ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm- ful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
1
8 SAFETY AND GENERAL INFORMATION
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV techni- cian for help.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
WARNING!! This device must be installed and used at a distance >20 cm from the body.

INTRODUCTION

CONTENTS
m UCONNECT 4 WITH 8.4–INCH DISPLAY . . . . . . .10
m IDENTIFYING YOUR RADIO . . . . . . . . . . . . . . . .11
2
m UCONNECT 4C/4C NAV SETTINGS . . . . . . . . . .13
10 INTRODUCTION
UCONNECT 4 WITH 8.4–INCH DISPLAY
Press the “Media” button on the touchscreen to access media sources such as: Disc (If Equipped), USB Device, AUX, Bluetooth, and SD Card (If Equipped) as long as the requested media is present.
3. Climate
Refer to Climate Controls in your vehicle’s Owner’s Manual for further details.
4. Apps
NOTE: Uconnect screen images are for illustration pur­poses only and may not reflect exact software for your vehicle.
1. Radio
Press the “Radio” button on the touchscreen to enter Radio Mode. The different tuner modes; AM, FM and SXM can be selected by pressing the corresponding buttons on the touchscreens in Radio Mode.
2. Media
Press the “Apps
” button on the touchscreen to access
Smartphone and Connected vehicle options.
5. Controls
Press the 9Controls9 button on the touchscreen to adjust the auto-dimming mirror, heated & vented seats, heated & vented steering wheel (If Equipped).
6. Phone
Press the “Phone” button on the touchscreen to access the Uconnect Phone feature.
7. Settings
Press the “Settings” button on the touchscreen to access vehicle and feature settings.
8. Enter/Browse & Tune/Scroll
Push the ENTER/BROWSE button to accept a highlighted selection on the screen. Rotate the TUNE/SCROLL rotary knob to scroll through a list or tune a radio station.
9. SCREEN OFF
Push the SCREEN OFF button to turn off the Uconnect touchscreen.
10. Volume and On/Off Button
Rotate the rotary knob to adjust the Volume. Push the Volume and On/Off button to turn on and off the system.
NOTE: Interior trims may vary
IDENTIFYING YOUR RADIO
Uconnect 4 With 8.4-Inch Display
INTRODUCTION 11
2
Key Features
The Uconnect 4 has the following features:
8.4” Touchscreen
Hands-free/Bluetooth
USB ports, and AUX jack — If Equipped
Touchscreen Climate Controls
12 INTRODUCTION
SiriusXM Satellite Radio with Trial Included — If Equipped
HD Radio
The Uconnect Voice Command And Uconnect Phone Buttons On Your Steering Wheel
The buttons let you use your voice to give commands, and make phone calls hands-free, and control your radio and media devices.
Uconnect Voice Command Buttons
1 — Push To Initiate Or To Answer A Phone Call, Send Or Receive A Text 2 — For All Radios: Push To Begin Radio, Media Functions, Apps, And Climate Functions. 3 — Push To End Call
INTRODUCTION 13
2
1 — Uconnect Phone Button 2 — Uconnect Voice Command Button 3 — Phone Hang Up Button 4 — Steering Wheel Audio Controls (Left Rear Surface of Steering Wheel) 5 — Steering Wheel Audio Controls (Right Rear Surface of Steering
NOTE: Interior trims may vary.
UCONNECT 4C/4C NAV SETTINGS
Wheel) 6 — Volume Knob/Mute Button 7 — Uconnect 4 Radio 8 — Tune or Scroll Knob/Browse or Enter Button 9 — Power Outlet
14 INTRODUCTION
1 — Uconnect Buttons On The Touchscreen 2 — Uconnect Buttons On The Faceplate
When making a selection, press the button on the touch­screen to enter the desired mode. Once in the desired mode, press and release the preferred setting until a check-mark appears next to the setting, showing that setting has been selected. Once the setting is complete, either press the Back Arrow button on the touchscreen to return to the previous menu, or press the “X” button on the touchscreen to close out of the settings screen. Pressing the Up or Down Arrow button on the right side of the screen will allow you to toggle up or down through the available settings.
Refer to “Uconnect Settings” in the Owner ’s Manual for further information.
Press the “Apps press the “Settings
” button on the touchscreen, then
” button on the touchscreen to display the menu setting screen. In this mode, the Uconnect system allows you to access all of your programmable features.
NOTE:
Only one touchscreen area may be selected at a time.
Depending on the vehicles options, available feature
settings may vary.

RADIO MODE

CONTENTS
m RADIO CONTROLS . . . . . . . . . . . . . . . . . . . . . .16
Steering Wheel Audio Controls — If Equipped . .18
Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Browse In SXM . . . . . . . . . . . . . . . . . . . . . . . . .23
3
m SETTING PRESETS . . . . . . . . . . . . . . . . . . . . . . .18
m SIRIUSXM SATELLITE RADIO MODE — IF
EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Replay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
m AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
16 RADIO MODE
RADIO CONTROLS
The radio is equipped with the following modes:
AM
FM
SiriusXM Satellite Radio (if equipped)
Press the RADIO button on the touchscreen, bottom left corner, to enter the Radio Mode. The different tuner modes; AM, FM, and SXM, can then be selected by pressing the corresponding buttons in the Radio mode.
VOLUME And ON/OFF Control
Push the VOLUME And On/OFF control knob to turn on and off the Uconnect system.
The electronic volume control turns continuously (360 de­grees) in either direction, without stopping. Turning the VOLUME And On/OFF control knob clockwise increases the volume, and counterclockwise decreases it.
MUTE Button
Push the MUTE button to mute the system. Push the MUTE button again to unmute the system.
TUNE/SCROLL Control
When the audio system is turned on, the sound will be set at the same volume level as last played.
Turn the rotary TUNE/SCROLL control knob clockwise to increase or counterclockwise to decrease the radio station frequency. Push the ENTER/BROWSE button to choose a selection.
Screen Close
The X button on the touchscreen at the top right, provides a means to close the Direct Tune Screen. The Direct Tune Screen also auto closes if no activity occurs within 20 sec­onds.
HD Radio
HD Radio technology (available only in the U.S. and Canadian markets) works similar to conventional radio except it allows broadcasters to transmit a high-quality digital signal. With an HD radio receiver, the listener is provided with a clear sound that enhances the listening experience. HD radio can also transmit data such as song title or artist.
Seek And Direct Tune Functions
The Seek Up and Down functions are activated by pressing the double arrow buttons on the touchscreen to the right
and left of the radio station display, or by pressing the left “Steering Wheel Audio Control” (if equipped) up or down.
Seek Up
Press and release the “Seek Up” screen to tune the radio to the next listenable station or channel. During a Seek Up function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began.
Fast Seek Up
Press and hold the “Seek Up” screen to advance the radio through the available sta­tions or channels at a faster rate, the radio stops at the next available station or channel when the button on the touchscreen is released.
Seek Down
Press and release the “Seek Down” touchscreen to tune the radio to the next listenable station or channel. During a Seek Down function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began.
button on the touch-
button on the touch-
button on the
RADIO MODE 17
Fast Seek Down
Press and hold the “Seek Down” screen to advance the radio through the available sta­tions or channel at a faster rate, the radio stops at the next available station or channel when the button on the touchscreen is released.
Direct Tune
Press the “Tune” button on the touchscreen located at the bottom of the radio screen. The Direct Tune button on the touchscreen is available in AM, FM and SXM radio modes and can be used to direct tune the radio to a desired station or channel.
Press the available number button on the touchscreen to begin selecting a desired station. Once a number has been entered, any numbers that are no longer possible (stations that cannot be reached) will become deactivated/grayed out.
Undo
You can backspace an entry by pressing the bottom left “Undo” button or the
GO
button on the touchscreen.
button on the touch-
3
18 RADIO MODE
Once the last digit of a station has been entered, the DIRECT TUNE screen will close and the system will automatically tune to that station.
The selected Station or Channel number is displayed in the Direct Tune text box.
Steering Wheel Audio Controls — If Equipped
The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches.
The right-hand control is a rocker-type switch with a push-button in the center and controls the volume and mode of the sound system. Pushing the top of the rocker switch will increase the volume, and pushing the bottom of the rocker switch will decrease the volume.
Pushing the center button will make the radio switch between the various modes available (AM/FM/AUX etc.).
The left-hand control is a rocker-type switch with a push­button in the center. The function of the left-hand control is different depending on which mode you are in.
The following describes the left-hand control operation in each mode.
Radio Operation
Pushing the top of the switch will “Seek” up for the next listenable station and pushing the bottom of the switch will “Seek” down for the next listenable station.
The button located in the center of the left-hand control will tune to the next preset station that you have pro­grammed in the radio preset button.
Media Mode
Pushing the top of the switch once will go to the next track on the selected media (AUX, Bluetooth, USB). Pushing the bottom of the switch once will go to the beginning of the current track, or to the beginning of the previous track if it is within eight seconds after the current track begins to play.
If you push the switch up or down twice, it plays the second track; three times, it will play the third, etc.
SETTING PRESETS
The Presets are available for all Radio Modes, and are activated by pressing any of the six “Preset” buttons on the touchscreen, located at the top of the screen.
When you are receiving a station that you wish to commit into memory, press and hold the desired numbered button on the touchscreen for more than two seconds or until you hear a confirmation beep.
RADIO MODE 19
A Preset can be selected by pressing any of the listed Presets, or by pushing the ENTER/BROWSE button on the TUNE/SCROLL knob to select the currently highlighted Preset.
The Radio stores up to 12 presets in each of the Radio modes. A set of six presets are visible at the top of the radio screen.
You can switch between the two radio presets by pressing the “arrow button” located in the upper right of the radio touchscreen.
Browse In AM/FM
When in either AM or FM, the Browse Screen provides a means to edit the Presets List and is entered by pushing the ENTER/BROWSE button.
Scrolling Preset List
Once in the Browse Presets screen, you can scroll the preset list by rotation of the TUNE/SCROLL knob, or by pressing the “Up and Down” arrow keys, located on the right of the screen.
Preset Selection From List
When selected, the radio tunes to the station stored in the Preset.
Deleting Presets
A Preset can be deleted in the Presets Browse screen by pressing the “Trash Can” icon for the corresponding Preset.
Return To Main Radio Screen
You can return to the Main Radio Screen, by pressing the “X” button, or the back arrow button, on the touchscreen when in the Browse Presets screen.
SIRIUSXM SATELLITE RADIO MODE — IF EQUIPPED
SiriusXM Satellite Radio uses direct satellite-to-receiver broadcasting technology to provide clear, coast to coast radio content. SiriusXM is a subscription based service.
SiriusXM All Access Package
3
20 RADIO MODE
All satellite radio equipped vehicles come with a trial to the SiriusXM All Access package, providing over 160 channels of the best programming for all the places life takes you.
In your vehicle — You’ll get every channel available on
your radio, including all the premium programming like Howard Stern, every NFL game, every MLB game, every NASCAR race, Oprah Radio, and more.
On the go — With a SiriusXM Internet Radio subscrip-
tion included with the All Access trial, you’ll get SiriusXM on your computer, smartphone, or tablet. Including:
A huge On Demand catalog
Xtra Channels featuring SiriusXM Latino – a collection
of Spanish-language channels
MySXM – allowing you to personalize your favorite music channels
Go to
siriusxm.com/getallaccess
for more information
SiriusXM services require subscriptions, sold separately after the trial included with the new vehicle purchase. If you decide to continue your service at the end of your trial subscription, the plan you choose will automatically renew and bill at then-current rates until you call SiriusXM at 866-635-2349 to cancel. See SiriusXM Customer Agreement
for complete terms at
www.siriusxm.com
. All fees and programming subject to change. Our satellite service is available only to those at least 18 and older in the 48 con­tiguous USA and D.C. Our SiriusXM satellite service is also available in PR (with coverage limitations). Our Internet radio service is available throughout our satellite service area and in AK. © 2017 SiriusXM Radio Inc. Sirius, XM and all related marks and logos are trademarks of SiriusXM Radio Inc. Service available in Canada; see www.siriusxm.ca
.
This functionality is only available for radios equipped with a Satellite receiver. In order to receive satellite radio, the vehicle needs to be outside with a clear view to the sky.
If the screen shows Acquiring Signal, you might have to change the vehicle’s position in order to receive a signal. In most cases, the satellite radio does not receive a signal in underground parking garages or tunnels.
No Subscription
Radios equipped with a Satellite receiver, require a sub­scription to the SiriusXM Service. When the Radio does not have the necessary subscription, the Radio is able to receive the Pre-View channel only.
Acquiring SiriusXM Subscription
To activate the SiriusXM Satellite Radio subscription, U.S. residents call:
RADIO MODE 21
The SiriusXM function buttons are displayed below the
Program Information.
1-800-643-2112
Canadian residents call:
1-877-438-9677
NOTE: You will need to provide the SiriusXM ID (RID) located at the bottom of the Channel 0 screen.
The Satellite Mode is activated by a press of the “SXM” button on the touchscreen.
When in Satellite mode:
The SXM button on the touchscreen is highlighted.
The SiriusXM Presets are displayed at the top of the
screen.
The Genre is displayed below the Presets Bar.
The SiriusXM Channel Number is displayed in the
center.
The Program Information is displayed at the bottom of the Channel Number.
Tuning is done by operating the Tune Knob or by Direct Tune, similar to other Radio Bands, see Presets, browse, Tune Knob, and Direct Tune.
3
In addition to the tuning Operation functions common to all Radio modes, the replay, Traffic/Weather Jump, and fav button functions are available in SiriusXM Mode.
Replay
The replay function provides a means to store and replay up to 22 minutes of music audio and 48 minutes of talk radio. Once the channel is switched, content in replay memory is lost.
Press the “Replay” button on the touchscreen. The play/ pause, rewind/forward and live buttons will display at the top of the screen, along with the replay time.
You can exit by pressing the “Replay” button on the touchscreen, any time during the Replay mode.
Play/Pause
22 RADIO MODE
Press the “Pause/Play” button on the touchscreen to pause the playing of live or rewound content at any time. Play can be resumed again by pressing of the “Pause/Play” button on the touchscreen.
Rewind
Press the “RW” button on the touchscreen to rewind the content in steps of five seconds. Pressing the “RW” button on the touchscreen for more than two seconds rewinds the content. The Radio begins playing the content at the point at which the press is released.
Forward
Each press of the “FW” button on the touchscreen forwards the content in steps of five seconds. Forwarding of the content can only be done when the content is previously rewound, and therefore, can not be done for live content. A continuous press of the “FW” button on the touchscreen also forwards the content. The Radio begins playing the content at the point at which the press is release.
Live
Press the “Live” button on the touchscreen to resume playing of Live content.
Favorites
Press the “fav.” button on the touchscreen to activate the favorites menu, which will time out within 20 seconds in absence of user interaction.
You can exit the Favorites Menu by a press of the “X” in the top right corner.
The favorites feature enables you to set a favorite artist, or song that is currently playing. The Radio then uses this information to alert you when either the favorite song, or favorite artist are being played at any time by any of the SiriusXM Channels.
The maximum number of favorites that can be stored in the Radio is 50.
Fav. Artist: While the song is playing to set a Favorite Artist, press the “fav.” button on the touchscreen and then the Fav. Artist button on the touchscreen.
Fav. Song: While the song is playing to set a Favorite Song, press the “fav.” button on the touchscreen and then the Fav Song button on the touchscreen.
Browse In SXM
Press the “Browse” button on the touchscreen to edit Presets, Favorites, Game Zone, and Jump settings, along with providing the SiriusXM Channel List.
This Screen contains many sub menus. You can exit a sub menu to return to a parent menu by pressing the “Back Arrow.”
All
Press the “All” button at the left of the Browse Screen.
Channel List
Press the Channel List, or Genre, to display all the SiriusXM Channel Numbers. You can scroll the Channel list by pressing the “Up and Down arrows”, located on the right side of the screen. Scrolling can also be done by operating the TUNE/SCROLL knob.
Genre
Press the “Genre” button on the touchscreen to display a list of Genres. You can select any desired Genre by pressing the “Genre” list, the Radio tunes to a channel with the content in the selected Genre.
RADIO MODE 23
Presets
Press the “Presets” button located at the left of the Browse screen.
You can scroll the Presets list pressing the up and down arrows located at the right side of the screen. Scrolling can also be done by operating the TUNE/SCROLL knob as well.
Preset Selection
A Preset can be selected by pressing any of the listed “Presets”, or by pushing the ENTER/BROWSE button on the TUNE/SCROLL knob to select the currently high­lighted Preset. When selected, the Radio tunes to the station stored in the Preset, and returns to the main Radio screen.
Deleting A Preset
A Preset can be deleted in the Presets Browse screen by pressing the “Trash Can” Icon for the corresponding Preset.
Favorites
Press the “Favorites” button located at the left of the Browse screen.
3
24 RADIO MODE
The Favorites menu provides a means to Edit the Favorites list and to configure the Alert Settings, along with provid­ing a list of Channels currently airing any of the items in the Favorites list.
You can scroll the Favorites list by pressing the “Up and Down” arrows located at the right side of the screen. Scrolling can also be done by operating the TUNE/ SCROLL knob as well.
Remove Favorites
Press the “Remove Favorites” tab at the top of the screen. Press the “Delete All” button on the touchscreen to delete all of the Favorites or press the “Trash Can” icon next to the Favorite to be deleted.
Alert Settings
Press the “Alert Setting” tab at the top of the screen. The Alert Settings menu allows you to choose from a Visual alert or Audible and Visual alert when one of your favor­ites is airing on any of the SiriusXM channels.
Tune Start
Tune Start begins playing the current song from the beginning when you tune to a music channel using one of the twelve presets, so you can enjoy the complete song.
This feature occurs the first time the preset is selected during that current song. Tune Start works in the back­ground, so you will not even realize it’s on, except that you will miss the experience of joining your favorite song with only a few seconds left to play. Refer to “Uconnect Set­tings” in your Owner’s Manual for further information.
Game Zone
Press the “Game Zone” button, located at the left of the Browse screen. This feature provides you with the ability to select teams, edit the selection, and set alerts.
On Air
Press the “On-Air” tab at the top of the screen. The On-Air list provides a list of Channels currently airing any of the items in the Selections list, and pressing any of the items in the list tunes the radio to that channel.
Select Teams
Press the “Select Teams” button on the touchscreen to activate the League Scroll list. Press the chosen league and a scroll list of all teams within the league will appear, then you can select a team by pressing the corresponding box. A check mark appears for all teams that are chosen.
Remove Selection
Press the “Remove Selection” tab at the top of the screen. Press the “Delete All” button on the touchscreen to delete all of the Selections or press the “Trash Can Icon” next to the Selection to be deleted.
RADIO MODE 25
Alert Settings
Press the “Alert Setting” tab at the top of the screen. The Alert Settings menu allows you to choose from “Alert me to on-air games upon start” or “Alert upon score update” or both when one or more of your selections is airing on any of the SiriusXM channels.
AUDIO
Press the “Audio” button on the touchscreen to activate the Audio settings screen to adjust Balance/Fade, Equalizer, Speed Adjusted Volume, Aux volume Offset, and Surround Sound.
You can return to the Radio screen by pressing the “X” located at the top right.
Balance/Fade
3
Press the “Balance/Fade” button on the touchscreen to Balance audio between the front speakers or fade the audio between the rear and front speakers.
Pressing the “Front,” “Rear,” “Left,” or “Right” buttons or press and drag the red Speaker Icon to adjust the Balance/ Fade.
Equalizer
26 RADIO MODE
Press the “Equalizer” button on the touchscreen to activate the Equalizer screen.
Press the “+” or “–” buttons, or by pressing and dragging over the level bar for each of the equalizer bands. The level value, which spans between plus or minus nine, is dis­played at the bottom of each of the Bands.
Speed Adjusted Volume
Press the “Speed Adjusted Volume” button on the touch­screen to activate the Speed Adjusted Volume screen.
The Speed Adjusted Volume is adjusted by selecting from “Off,” “1,” “2” or “3.” This alters the automatic adjustment of the audio volume with variation to vehicle speed. Volume increases automatically as speed increase to com­pensate for normal road noise.
Surround Sound
Press the “On” button on the touchscreen to activate Surround Sound. Press “Off” to deactivate this feature.
When Surround Sound is On, you can hear audio coming from every direction as in a movie theatre or home theatre system.
RADIO MODE 27
The AUX Volume Offset is adjusted by pressing of the “+” and “–” buttons. This alters the AUX input audio volume. The level value, which spans between plus or minus three, is displayed above the adjustment bar.
Auto Play
3
AUX Volume Offset
Press the “AUX Volume Offset” button on the touchscreen to activate the AUX Volume Offset screen.
Press the “Auto Play” button on the touchscreen to activate the Auto Play screen.
28 RADIO MODE
The Auto Play feature begins playing music as soon as a USB Media device is connected to one of the vehicle’s Media USB ports, when it is turned on. Press “Off” to turn the setting off.

MEDIA MODE

CONTENTS
m DISC MODE — IF EQUIPPED . . . . . . . . . . . . . . .30
Android Auto . . . . . . . . . . . . . . . . . . . . . . . . . .34
m USB MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
m AUX MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
m BLUETOOTH MODE . . . . . . . . . . . . . . . . . . . . . .33
m ANDROID AUTO & APPLE CARPLAY . . . . . . . . .34
Apple CarPlay Integration . . . . . . . . . . . . . . . . .39
4
Android Auto And Apple CarPlay Tips And
Tricks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
30 MEDIA MODE
DISC MODE — IF EQUIPPED
Overview
Disc Mode is entered by either inserting a Disc or pressing the “Disc” button on the left side of the display. Once in Media Mode, press the “Source” button on the touchscreen and select “CD.”
A “Insert Disc” message will be displayed on the screen in the Disc mode when a Disc is not present in the Radio.
Seek Up
Press and release the Seek Up
/Seek Down
button on the touch­screen for the next selection on the Disc. Press and release the Seek Down
button on the touchscreen to return to the beginning of the current selection, or to return to the beginning of the previous selection if the Disc is within the first three seconds of the current selection.
Browse
Press the “Browse” button on the touchscreen to display the browse window. The left side of the browse window displays a list of ways you can browse through the contents of the Disc. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Press the
desired button on the touchscreen on the left side of the screen. The center of the browse window shows items and it’s sub-functions, which can be scrolled by pressing the “Up” and “Down” buttons to the right. The TUNE/ SCROLL knob can also be used to scroll.
Media Mode
Press the “Media” button on the touchscreen to select the desired audio source: Disc.
Repeat
Press the “Repeat” button on the touchscreen to toggle the repeat functionality. The Repeat button on the touchscreen is highlighted when active. The Radio will continue to play the current track, repeatedly, as long as the repeat is active.
Shuffle
Press the “Shuffle” button on the touchscreen to play the selections on the compact disc in random order to provide an interesting change of pace. Press the button on the touchscreen a second time to turn this feature off.
Audio
Refer to Radio Mode for adjusting the audio settings.
Info
Press the “Info” button on the touchscreen to display the current track information. Press the “Info” button on the touchscreen a second time to cancel this feature.
Tracks
Press the “trks” button on the touchscreen to display a pop up with the Song List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the Tracks List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then push the ENTER/BROWSE knob to start playing that track.
Pressing the “trks” button on the touchscreen while the pop up is displayed will close the pop up.
USB MODE
Overview
USB/iPod Mode is entered by either inserting a USB device or iPod and cable into the USB Port or press the “iPod” button on the left side of the display.
Seek Up
Press and release the Seek Up screen for the next selection on the USB device/iPod.
/Seek Down
button on the touch-
MEDIA MODE 31
Press and release the Seek Down touchscreen to return to the beginning of the current selection, or to return to the beginning of the previous selection if the USB device/iPod is within the first three seconds of the current selection.
Browse
Press the “Browse” button on the touchscreen to display the browse window. The left side of the browse window displays a list of ways you can browse through the contents of the USB device/iPod. If supported by the device, you can browse by Folders, Artists, Playlists, Albums, Songs, etc. Press the desired button on the left side of the screen. The center of the browse window shows items and it’s sub-functions, which can be scrolled by pressing the “Up” and “Down” buttons to the right. The TUNE/SCROLL knob can also be used to scroll.
Media Mode
Press the “Media” button on the touchscreen to select the desired audio source: USB.
Repeat
Press the “Repeat” button on the touchscreen to toggle the repeat functionality. The Repeat button on the touchscreen
button on the
4
32 MEDIA MODE
is highlighted when active. The Radio will continue to play the current track, repeatedly, as long as the repeat is active.
Shuffle
Press the “Shuffle” button on the touchscreen to play the selections on the USB/iPod device in random order to provide an interesting change of pace. Press the “Shuffle” button on the touchscreen a second time to turn this feature off.
Info
Press the “Info” button on the touchscreen to display the current track information. Press the “Info” button on the touchscreen a second time to cancel this feature.
Tracks
Press the “trks” button on the touchscreen to display a pop up with the Song List. The currently playing song is indicated by an arrow and lines above and below the song title. When in the “trks” List screen you can rotate the TUNE/SCROLL knob to highlight a track (indicated by the line above and below the track name) and then push the ENTER/BROWSE knob to start playing that track.
Pressing the “trks” button on the touchscreen while the pop up is displayed will close the pop up.
Audio
Refer to Radio Mode for adjusting the audio settings.
AUX MODE
Overview
AUX (Auxiliary Mode) is entered by inserting an AUX device using a cable with a 3.5 mm audio jack into the AUX port or by pressing the AUX button on the left side of the display.
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX Port. If you insert an Auxiliary device with the ignition ON and the radio ON, the unit will switch to AUX mode and begin to play when you insert the device cable.
Controlling The Auxiliary Device
The control of the auxiliary device (e.g., selecting playlists, play, fast forward, etc.) cannot be provided by the radio; use the device controls instead. Adjust the volume with the VOLUME And ON/OFF rotary knob, or with the volume of the attached device.
NOTE: The vehicle radio unit is acting as the amplifier for audio output from the Auxiliary device. Therefore, if the volume control on the Auxiliary device is set too low, there will be insufficient audio signal for the radio unit to play the music on the device.
Media Mode
MEDIA MODE 33
To access Bluetooth mode, press the “Bluetooth” button on the left side of the display.
Press the “Media” button on the touchscreen to select the desired audio source: AUX.
Audio
Refer to Radio Mode for adjusting the audio settings.
BLUETOOTH MODE
Overview
Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is entered by pairing a Bluetooth device, containing music, to the Uconnect System.
Before proceeding, the Bluetooth device must be paired to the Uconnect Phone to communicate with the Uconnect System.
NOTE: See the pairing procedure in the Uconnect Phone section for more details.
Seek Up
Press and release the “Right Arrow” touchscreen for the next selection on the Bluetooth device. Press and release the “Left Arrow” the touchscreen to return to the beginning of the current
/Down
button on the
button on
4
34 MEDIA MODE
selection, or return to the beginning of the previous selection if the Bluetooth device is within the first second of the current selection.
Media Mode
Press the “Media” button on the touchscreen to select the desired audio source: Bluetooth.
Tracks
If the Bluetooth device supports this feature, press the “trks” button on the touchscreen to display a pop up with the Song List. The currently playing song is indicated by a red arrow and lines above and below the song title.
Pressing the “trks” button on the touchscreen while the pop up is displayed will close the pop up.
Audio
with a data plan, that allows you to project your smart­phone and a number of its apps onto the touchscreen radio display. Android Auto automatically brings you useful information, and organizes it into simple cards that appear just when they are needed. Android Auto can be used with Google’s best-in-class speech technology, the steering wheel controls, the knobs and buttons on your radio faceplate, and the radio display’s touchscreen to control many of your apps. To use Android Auto follow the following procedure:
1. Download the Android Auto app from the Google Play store on your Android-powered smartphone.
2. Connect your Android powered smartphone to one of the media USB ports in your vehicle. If the Android Auto app was not downloaded, the first time you plug your device in, the app will begin to download.
Refer to Radio Mode for adjusting the audio settings.
ANDROID AUTO & APPLE CARPLAY
Android Auto
Android Auto is a feature of your Uconnect system, and your Android 5.0 Lollipop, or higher, powered smartphone
NOTE: Be sure to use the factory-provided USB cable that came with your phone, as aftermarket cables may not work.
MEDIA MODE 35
Once Android Auto is up and running on your Uconnect radio, the following features can be utilized using your smartphone’s data plan:
Google Maps for navigation
Google Play Music, Spotify, iHeart Radio, etc. for music
3. Once the device is connected and recognized, the “Phone” icon on the personalized menu bar will auto­matically change to the Android Auto Icon. Android Auto should automatically launch, but if it does not launch automatically, refer to “Android Auto And Apple CarPlay Tips And Tricks” in this section for the procedure to enable the feature “AutoShow”. You can also launch it by touching the Android Auto icon on the touchscreen.
Handsfree Calling, and Texting for communication
4
Hundred of compatible apps
NOTE: To use Android Auto, make sure you are in an area with cellular coverage. Android Auto may use cellular data and your cellular coverage is shown in the upper right corner of the radio screen.
36 MEDIA MODE
Maps
Push and hold the VR button on the steering wheel or tap the microphone icon to ask Google to take you to a desired destination by voice. You can also touch the Navigation icon in Android Auto to access Google Maps.
While using Android Auto, Google Maps provides voice­guided:
Navigation
Live traffic information
Lane guidance
NOTE: If the VR button is not held, and is only pushed, the native Uconnect VR will prompt you and any navigation command said will launch the native Uconnect navigation system.
For further information, refer to www.android.com/auto/
.
For further information on the navigation function, please refer to https://support.google.com/androidauto/.
Music
Android Auto allows you to access and stream your favorite music with apps like Google Play Music, iHeartRadio, and Spotify. Using your smartphone’s data plan, you can stream endless music on the road.
NOTE: Music apps, playlists, and stations must be set up on your smartphone prior to using Android Auto, for them to work with Android Auto.
https://support.google.com/android
or
MEDIA MODE 37
NOTE: To see the metadata for the music playing through Android Auto, select the Uconnect System’s media screen.
For further information refer to https://support.google.com/androidauto
Communication
With Android Auto connected, press and hold the VR button on the steering wheel to activate voice recognition specific to the Android Auto. This will allow you to send
.
4
38 MEDIA MODE
and reply to text messages, have incoming text messages read out loud, and place and receive hands-free calls.
Apps
The Android Auto App will display all the compatible apps that are available to use with Android Auto, every time it is launched. You must have the compatible app down­loaded, and you must be signed in to the app for it to work with Android Auto. Refer to
g.co/androidauto
to see the
latest list of available apps for Android Auto.
Apple CarPlay Integration
Uconnect works seamlessly with Apple CarPlay, the smarter, more secure way to use your iPhone in the car, and stay focused on the road. Use your Uconnect Touchscreen display, the vehicle’s knobs and controls, and your voice with Siri to get access to Apple Music, Maps, Messages, and more.
To use CarPlay, make sure you are using iPhone 5 or later, have Siri enabled in Settings, ensure your iPhone is un­locked for the very first connection only, and then use the following procedure:
1. Connect your iPhone to one of the media USB ports in your vehicle.
NOTE: Be sure to use the factory-provided Lightning cable that came with your phone, as aftermarket cables may not work.
MEDIA MODE 39
2. Once the device is connected and recognized, the “Phone” icon on the personalized menu bar will auto­matically change to the CarPlay Icon. CarPlay should launch automatically, but if not, refer to “Android Auto And Apple CarPlay Tips And Tricks” in this section for the procedure to enable the feature “AutoShow”. You can also touch the Apple CarPlay icon on the touch­screen to launch it.
4
40 MEDIA MODE
Once CarPlay is up and running on your Uconnect radio, the following features can be utilized using your iPhone’s data plan:
Phone
Music
Messages
Maps
NOTE: To use CarPlay make sure that cellular data is turned on, and that you are in an area with cellular coverage. Your data and cellular coverage is shown on the left side of the radio screen.
Phone
With CarPlay, press and hold the VR button on the steering wheel to activate a Siri voice recognition session. You can also press and hold the Home button within CarPlay to start talking to Siri.
This will allow you to make calls or listen to voice mail as you normally would using Siri on your iPhone.
NOTE: Only temporarily pushing the VR button on the steering wheel will launch a native VR session, not a Siri session, and it will not function with CarPlay.
Music
CarPlay allows you to access all your artists, playlists, and music from iTunes. Using your iPhone’s data plan, you can also use select third party audio apps including music, news, sports, podcasts and more.
MEDIA MODE 41
4
Messages
Just like Phone, CarPlay allows you to use Siri to send or reply to text mes­sages. Siri can also read incoming text messages, but driver’s will not be able to read messages, as everything is done via voice.
42 MEDIA MODE
Maps
To use your Apple Maps for navigation on your Uconnect system, launch Car­Play, and push and hold the VR button on the steering wheel to use Siri to set your desired destination. Alternatively, choose a Nearby destination by pressing
Destinations and selecting a category, by launching Siri from the destinations page, or even by typing in a destination.
Apps
To use a compatible app with CarPlay, you must have the compatible app downloaded, and you must be signed in to the app. Refer to
http://www.apple.com/ios/carplay/
to see the latest list of available apps for CarPlay.
Android Auto And Apple CarPlay Tips And Tricks
AutoPlay
AutoPlay is a feature of the Uconnect system that auto­matically begins playing music off of the connected device, as soon as it is connected. This feature can be turned on or off in the Uconnect Settings, within the Audio Settings category. It’s default setting is on.
NOTE: AutoPlay is not supported by Android Auto.
AutoShow
MEDIA MODE 43
AutoShow is a feature of the Uconnect system that auto­matically launches and displays Android Auto/Apple Car­Play when the phone is initially connected to the USB media port. This feature can be turned on and off in the Uconnect Settings, within the Display Settings category. The default setting is on.
4
Android Auto Automatic Bluetooth Pairing
After connecting to Android Auto for the first time and undergoing the setup procedure, the smartphone will
44 MEDIA MODE
automatically pair to the Uconnect system via Bluetooth without any setup required every time it is within range, if Bluetooth is turned on.
NOTE: Android Auto features cannot be used with Bluetooth, a USB connection is required for its use. Android Auto uses both Bluetooth and USB connections to function, and the connected device will be unavailable to other devices when connected using Android Auto.
Multiple Devices Connecting To The Uconnect System
It is possible to have multiple devices connected to the Uconnect system. For example, if using Android Auto/ Apple CarPlay, the connected device will be the one that will be used to place hands-free phone calls or send hands-free text messages. However, another device can also be paired to the Uconnect system, via Bluetooth, as an audio source, so the passenger can stream music.
NOTE:
If using a Samsung device, every time it is connected to
a media USB, and there is another device plugged in, you will need to manually change the configuration of the USB connection in order for the Samsung device to send data.

PHONE MODE

CONTENTS
m OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
m PHONE OPERATION . . . . . . . . . . . . . . . . . . . . .49
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Natural Speech . . . . . . . . . . . . . . . . . . . . . . . . .49
Help Command . . . . . . . . . . . . . . . . . . . . . . . .50
Cancel Command . . . . . . . . . . . . . . . . . . . . . . .50
Pair (Link) Uconnect Phone To A Mobile Phone . .50
Pair Additional Mobile Phones . . . . . . . . . . . . . .52
Pair A Bluetooth Streaming Audio Device . . . . . .53
Connecting To A Particular Mobile Phone Or Audio
Device After Pairing . . . . . . . . . . . . . . . . . . . . .53
Phonebook Download (Automatic Phonebook
Transfer From Mobile Phone) — If Equipped . . . .54
Managing Your Favorites . . . . . . . . . . . . . . . . . .55
To Remove A Favorite . . . . . . . . . . . . . . . . . . . .55
m PHONE CALL FEATURES . . . . . . . . . . . . . . . . . .56
Ways To Initiate A Phone Call . . . . . . . . . . . . . .56
Dial By Saying A Number . . . . . . . . . . . . . . . . .56
Call By Saying A Phonebook Name . . . . . . . . . .56
Call Controls . . . . . . . . . . . . . . . . . . . . . . . . . .56
Touch-Tone Number Entry . . . . . . . . . . . . . . . . .57
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . .57
5
Disconnecting A Phone Or Audio Device . . . . . .54
Deleting A Phone Or Audio Device . . . . . . . . . .54
Making A Phone Or Audio Device A Favorite . . .54
Answer Or Ignore An Incoming Call — No Call
Currently In Progress . . . . . . . . . . . . . . . . . . . .57
Answer Or Ignore An Incoming Call — Call
Currently In Progress . . . . . . . . . . . . . . . . . . . .58
46 PHONE MODE
Do Not Disturb . . . . . . . . . . . . . . . . . . . . . . . .58
Transfer Call To And From Mobile Phone . . . . . .59
Place/Retrieve A Call From Hold . . . . . . . . . . . .58
Making A Second Call While Current Call Is In
Progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Toggling Between Calls . . . . . . . . . . . . . . . . . . .59
Join Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Call Termination . . . . . . . . . . . . . . . . . . . . . . . .59
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Call Continuation . . . . . . . . . . . . . . . . . . . . . . .59
m ADVANCED PHONE CONNECTIVITY . . . . . . . . .59
Connect Or Disconnect Link Between The Uconnect
Phone And Mobile Phone . . . . . . . . . . . . . . . . .60
m THINGS YOU SHOULD KNOW ABOUT YOUR
UCONNECT PHONE . . . . . . . . . . . . . . . . . . . . .60
Voice Command . . . . . . . . . . . . . . . . . . . . . . . .60
Far End Audio Performance . . . . . . . . . . . . . . .61
Bluetooth Communication Link . . . . . . . . . . . . .61
Power-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
General Information . . . . . . . . . . . . . . . . . . . . .61
OVERVIEW
Uconnect Phone is a voice-activated, hands-free, in-vehicle communications system. Uconnect Phone allows you to dial a phone number with your mobile phone.
Uconnect Phone supports the following features:
Voice Activated Features:
Hands-Free dialing via Voice (“Call John Smith Mobile”
or, “Dial 248-555-1212”).
Hands-Free text to speech listening of your incoming
SMS messages.
Hands-free Text Message Reply. (Forward one of 18 pre-
defined SMS messages to incoming calls/text messages).
Redialing last dialed numbers (“Redial”).
Calling Back the last incoming call number (“Call
Back”).
View Call logs on screen (“Show incoming calls,” “Show
Outgoing calls,” “Show missed Calls,” “Show Recent Calls”).
Searching Contacts phone number (“Search for John
Smith Mobile”).
PHONE MODE 47
Screen Activated Features
Dialing via Keypad using touchscreen.
Viewing and Calling contacts from Phonebooks dis-
played on the touchscreen.
Setting Favorite Contact Phone numbers so they are easily accessible on the Main Phone screen.
Viewing and Calling contacts from Recent Call logs.
Reviewing your recent Incoming SMS.
Listen to Music on your Bluetooth Device via the
touchscreen.
Pairing up to ten phones/audio devices for easy access to connect to them quickly.
NOTE: Your phone must be capable of SMS messaging via Bluetooth for messaging features to work properly.
Your mobile phone’s audio is transmitted through your vehicle’s audio system; the system will automatically mute your radio when using the Uconnect Phone.
For Uconnect customer support:
U.S. residents - visit
UconnectPhone.com
or call:
5
48 PHONE MODE
877-855-8400
Canadian residents - (English) call:
800-465-2001
or (French) call:
800-387-9983
Uconnect Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation.
WARNING!
ALWAYS drive safely with your hands on the steer­ing wheel. You have full responsibility and assume all risks related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury or death.
The Uconnect Phone is driven through your Bluetooth “Hands-Free Profile” mobile phone. Uconnect features Bluetooth technology - the global standard that enables
different electronic devices to connect to each other with­out wires or a docking station, so Uconnect Phone works no matter where you stow your mobile phone (be it your purse, pocket, or briefcase), as long as your phone is turned on and has been paired to the vehicle’s Uconnect Phone. The Uconnect Phone allows up to ten mobile phones or audio devices to be linked to the system. Only one linked (or paired) mobile phone and one audio device can be used with the system at a time.
Uconnect Phone Button
The Uconnect Phone
button on your steering wheel is used to get into the phone mode and make calls, show recent, incoming, outgoing calls, view phonebook etc., When you press the button you will hear a BEEP. The beep is your signal to give a command.
Uconnect Voice Command Button
The Uconnect Voice Command
button on your steer­ing wheel is only used for “barge in” and when you are already in a call and you want to send Tones or make another call.
The
button on your steering wheel is also used to
access the Voice Commands for the Uconnect Voice
Command features if your vehicle is equipped. Please see the Uconnect Voice Command section for direction on how to use the
button.
PHONE MODE 49
Prior to giving a voice command, one must wait for the
beep, which follows the “Listen” prompt or another prompt.
The Uconnect Phone is fully integrated with the vehicle’s audio system. The volume of the Uconnect Phone can be adjusted either from the radio volume control knob or from the steering wheel radio control (right switch), if equipped.
PHONE OPERATION
Operation
Voice commands can be used to operate the Uconnect Phone and to navigate through the Uconnect Phone menu structure. Voice commands are required after most Uconnect Phone prompts. There are two general methods for how Voice Command works:
1. Say compound commands like “Call John Smith mo­bile.”
2. Say the individual commands and allow the system to guide you to complete the task.
You will be prompted for a specific command and then guided through the available options.
For certain operations, compound commands can be used. For example, instead of saying “Call” and then “John Smith” and then “mobile”, the following com­pound command can be said: “Call John Smith mobile.”
For each feature explanation in this section, only the compound command form of the voice command is given. You can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the compound command form voice command “Search for John Smith,” or you can break the compound command form into two voice commands: “Search Contact” and when asked “John Smith.” Please remember, the Uconnect Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you.
Natural Speech
Your Uconnect Phone Voice system uses a Natural Lan­guage Voice Recognition (VR) engine.
5
50 PHONE MODE
Natural speech allows the user to speak commands in phrases or complete sentences. The system filters out certain non-word utterances and sounds such as “ah” and “eh.” The system handles fill-in words such as “I would like to.”
The system handles multiple inputs in the same phrase or sentence such as “make a phone call” and “to Kelly Smith.” For multiple inputs in the same phrase or sentence, the system identifies the topic or context and provides the associated follow-up prompt such as “Who do you want to call?” in the case where a phone call was requested but the specific name was not recognized.
The system utilizes continuous dialog; when the system requires more information from the user it will ask a question to which the user can respond without pushing the “Voice Command”
button on your steering wheel.
Help Command
If you need assistance at any prompt, or if you want to know your options at any prompt, say “Help” following the beep.
To activate the Uconnect Phone from idle, simply push the Phone
button on your steering wheel and say a
command or say “help.” All Uconnect Phone sessions begin with a push of the Phone
button on the radio
control head.
Cancel Command
At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu.
You can also push the Phone
or Voice Command
button on your steering wheel when the system is listening for a command and be returned to the main or previous menu.
Pair (Link) Uconnect Phone To A Mobile Phone
To begin using your Uconnect Phone, you must pair your compatible Bluetooth enabled mobile phone. Mobile phone pairing is the process of establishing a wireless connection between a cellular phone and the Uconnect system.
To complete the pairing process, you will need to reference your mobile phone Owner’s Manual. Please visit UconnectPhone.com
for complete mobile phone compat-
ibility information.
NOTE:
You must have Bluetooth enabled on your phone to complete this procedure.
The vehicle must be in PARK.
1. Place the ignition in the ACC or ON position.
2. Press the “Phone” button in the Menu Bar on the
touchscreen.
PHONE MODE 51
If there are no phones currently connected with the system, a pop-up will appear asking if you would like to pair a mobile phone.
3. Select “Yes” to begin the pairing process.
4. Search for available devices on your Bluetooth enabled mobile phone.
Press the Settings button on your mobile phone.
Select Bluetooth and ensure it is enabled. Once en-
abled, the mobile phone will begin to search for Bluetooth connections.
5. If No is selected, and you still would like to pair a mobile phone, press the “Pairing” button from the Uconnect Phone main screen.
Select “Paired Phones” then press the “Paired Phones and Audio Devices” button on the touchscreen, then press the “Add Device”.
Search for available devices on your Bluetooth enabled mobile phone (see below). When prompted on the phone, select “Uconnect” and accept the connection request.
6. Uconnect Phone will display an in progress screen while the system is connecting.
5
52 PHONE MODE
7. When your mobile phone finds the Uconnect system, select “Uconnect.”
2. Press the “Paired Phones and Audio Devices” button on the touchscreen.
8. When prompted on the mobile phone, accept the con­nection request from Uconnect Phone.
NOTE: Some mobile phones will require you to enter the PIN number.
9. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting “Yes” will make this phone the highest priority. This phone will take precedence over other paired phones within range and will connect to the Uconnect system automatically when entering the vehicle. Only one mobile phone and/or one Bluetooth audio device can be connected to the Uconnect system at a time. If “No” is selected, simply select “Uconnect” from the mobile phone/audio device Bluetooth screen, and the Uconnect system will recon­nect to the Bluetooth device.
Pair Additional Mobile Phones
1. Press the “Pairing” button on the touchscreen from the Phone main screen.
3. Press the “Add Device” button on the touchscreen.
4. Search for available devices on your Bluetooth enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect screen.
5. Uconnect Phone will display an in process screen while the system is connecting.
6. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting “Yes” will make this phone the highest priority. This phone will take precedence over other paired phones within range.
NOTE: For phones which are not made a favorite, the phone priority is determined by the order in which it was paired. The latest phone paired will have the higher priority.
You can also use the following VR commands to bring up the Paired Phone screen from any screen on the radio:
“Show Paired Phones” or
“Connect My Phone”
Pair A Bluetooth Streaming Audio Device
1. Press the “Media” button on the touchscreen to begin.
2. Change the Source to Bluetooth.
3. Press the “Bluetooth” button on the touchscreen to display the Paired Audio Devices screen.
4. Press the “Add Device” button on the touchscreen.
NOTE: If there is no device currently connected with the system, a pop-up will appear.
5. Search for available devices on your Bluetooth enabled audio device. When prompted on the device, enter the PIN shown on the Uconnect screen.
6. Uconnect Phone will display an in process screen while the system is connecting.
7. When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite device. Selecting Yes will make this device the highest priority. This device will take prece­dence over other paired devices within range.
PHONE MODE 53
NOTE: For devices which are not made a favorite, the device priority is determined by the order in which it was paired. The latest device paired will have the higher priority.
You can also use the following VR command to bring up a list of paired audio devices.
“Show Paired Phones” or
“Connect My Phone”
5
Connecting To A Particular Mobile Phone Or Audio Device After Pairing
Uconnect Phone will automatically connect to the highest priority paired phone and/or Audio Device within range. If you need to choose a particular phone or Audio Device follow these steps:
1. Press the “Pairing” button on the touchscreen.
2. Press the “Paired and Audio Devices” button on the touchscreen.
3. Press to select the particular Phone or the particular Audio Device. A pop-up menu will appear, press “Con­nect Phone.”
4. Press the “X” to exit out of the Settings screen.
54 PHONE MODE
Disconnecting A Phone Or Audio Device
6. Press the “X” to exit out of the Settings screen.
1. Press the “Pairing” button on the touchscreen.
2. Press the “Paired Phones and Audio Devices” button on the touchscreen.
3. Press the “Settings” button located to the right of the device name.
4. The options pop-up will be displayed.
5. Press the “Disconnect Device” button on the touch­screen.
6. Press the “X” to exit out of the Settings screen.
Deleting A Phone Or Audio Device
1. Press the “Pairing” button on the touchscreen.
2. Press the “Paired Phones and Audio Devices” button on the touchscreen.
3. Press the “Settings” button located to the right of the device name for a different Phone or Audio Device than the currently connected device.
4. The options pop-up will be displayed.
5. Press the “Delete Device” button on the touchscreen.
Making A Phone Or Audio Device A Favorite
1. Press the “Pairing” button on the touchscreen.
2. Press the “Paired Phones and Audio Devices” button on the touchscreen.
3. Press the “Settings” button located to the right of the device name.
4. The options pop-up will be displayed.
5. Press the “Make Favorite” button on the touchscreen; you will see the chosen device move to the top of the list.
6. Press the “X” to exit out of the Settings screen.
Phonebook Download (Automatic Phonebook Transfer From Mobile Phone) — If Equipped
If equipped and specifically supported by your phone, Uconnect Phone automatically downloads names (text names) and number entries from the mobile phone’s phonebook. Specific Bluetooth Phones with Phone Book Access Profile may support this feature. See Uconnect website,
UconnectPhone.com
, for supported phones.
To call a name from a downloaded mobile phone book, follow the procedure in the “Uconnect Voice Recognition Quick Tips” section.
Automatic download and update of a phone book, if supported, begins as soon as the Bluetooth wireless phone connection is made to the Uconnect Phone, for example, after you start the vehicle.
A maximum of 5,000 contact names with four numbers per contact will be downloaded and updated every time a phone is connected to the Uconnect Phone.
Depending on the maximum number of entries down­loaded, there may be a short delay before the latest downloaded names can be used. Until then, if available, the previously downloaded phonebook is available for use.
Only the phonebook of the currently connected mobile phone is accessible.
This downloaded phonebook cannot be edited or de­leted on the Uconnect Phone. These can only be edited on the mobile phone. The changes are transferred and updated to Uconnect Phone on the next phone connec­tion.
PHONE MODE 55
Managing Your Favorites
There are two ways you can add an entry to your Favorites.
1. After loading the mobile phonebook, press the “Favor­ites” button on the touchscreen, and then press one of the “+Add favorite Contact” buttons that appears on the list.
2. After loading the mobile phonebook, select “Contacts” from the Phone main screen, then select the appropriate number. Press the down arrow symbol button next to the selected number to display the options pop-up. In the pop-up select “Add to Favorites.”
NOTE: If the Favorites list is full, you will be asked to remove an existing favorite.
To Remove A Favorite
1. To remove a Favorite, select “Favorites” from the Phone main screen.
2. Next select the down arrow icon next to the contact you want to remove from your favorites. This will bring up the options for that favorite contact.
3. Press “Remove from Favs.”
5
56 PHONE MODE
PHONE CALL FEATURES
The following features can be accessed through the Uconnect Phone if the feature(s) are available and sup­ported by Bluetooth on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the Uconnect Phone. Check with your mobile service provider for the features that you have.
Ways To Initiate A Phone Call
Listed below are all the ways you can initiate a phone call with Uconnect Phone.
Redial
Dial by pressing in the number
Voice Commands (Dial by Saying a Name, Call by
Saying a Phonebook Name, Redial or Call Back)
Favorites
Mobile Phonebook
Recent Call Log
SMS Message Viewer
Dial By Saying A Number
1. Push the “VR” button on your steering wheel to begin.
2. After the “Listening” prompt and the following beep, say “Dial 151-123-4444.”
3. The Uconnect Phone will dial the number 151-123-4444.
Call By Saying A Phonebook Name
1. Push the “VR” button on your steering wheel to begin.
2. After the “Listening” prompt and the following beep, say “Call John Doe Mobile.”
3. The Uconnect Phone will dial the number associated with John Doe, or if there are multiple numbers it will ask which number you want to call for John Doe.
Call Controls
The touchscreen allows you to control the following call features:
Answer
End
Ignore
Hold/unhold
Mute/unmute
Transfer the call to/from the phone
Swap two active calls
Join two active calls together
Touch-Tone Number Entry
1. Press the “Phone” button on the touchscreen.
2. Press the “Dial” button on the touchscreen.
3. The Touch-Tone screen will be displayed.
4. Use the numbered buttons on the touchscreens to enter the number and press “Call.”
If your vehicle has two buttons on the steering wheel (VR and Phone), press the VR wheel to send a touch-tone. If your vehicles has three buttons on the steering wheel (VR, Phone Send, and Phone End), press the Phone Send button on your steering wheel to send a touch-tone and say “Send 1234#” or you can say “Send Voicemail Password” if Voicemail password is stored in your mobile phone­book.
button on your steering
PHONE MODE 57
Recent Calls
You may browse a list of the most recent of each of the following call types:
All Calls
Incoming Calls
Outgoing Calls
Missed Calls
These can be accessed by pressing the “recent calls” button on the Phone main screen.
You can also push the “VR” button on your steering wheel and say “Show my incoming calls” from any screen and the Incoming calls will be displayed.
NOTE: Incoming can also be replaced with “Outgoing,” “Recent” or “Missed.”
Answer Or Ignore An Incoming Call — No Call Currently In Progress
When you receive a call on your mobile phone, the Uconnect Phone will interrupt the vehicle audio system. Push the Phone the call. You can also press the “answer” button on the touchscreen or press the caller ID box.
button on the steering wheel to accept
5
58 PHONE MODE
Answer Or Ignore An Incoming Call — Call Currently In Progress
If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your mobile phone. Press the “Uconnect Phone”
button on the steering wheel, answer button on the touchscreen or caller ID box to place the current call on hold and answer the incoming call.
“I am driving right now, I will get back to you shortly.”
Create a custom auto reply message up to 160 characters.
NOTE: Only the first 25 characters can be seen on the touchscreen while typing a custom message.
While in Do Not Disturb, Conference Call can be selected so you can still place a second call without being inter­rupted by incoming calls.
NOTE: The Uconnect Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progress. Therefore, the user can only answer an incoming call or ignore it.
Do Not Disturb
With Do Not Disturb, you can disable notifications from incoming calls and texts, allowing you to keep your eyes on the road and hands on the wheel. For your convenience, there is a counter display to keep track of your missed calls and text messages while you were using Do Not Disturb.
Do Not Disturb can automatically reply with a text mes­sage, a call or both, when declining an incoming call and send it to voicemail.
Automatic reply messages can be:
NOTE:
Reply with text message is not compatible with iPhones.
Auto reply with text message is only available on
phones that support Bluetooth MAP.
Place/Retrieve A Call From Hold
During an active call, press the “Hold” button on the Phone main screen.
Making A Second Call While Current Call Is In Progress
You can place a call on hold by pressing the “Hold” button on the Phone main screen, then dial a number from the dialpad, recent calls, SMS Inbox or from the phonebooks.
To go back to the first call, refer to “Toggling Between Calls” in this section. To combine two calls, refer to “Join Calls” in this section.
Toggling Between Calls
If two calls are in progress (one active and one on hold), press the “Swap” button on the Phone main screen. Only one call can be placed on hold at a time.
You can also push the Phone the active and held phone call.
Join Calls
When two calls are in progress (one active and one on hold), press the “Join Calls” button on the Phone main screen to combine all calls into a Conference Call.
Call Termination
To end a call in progress, momentarily press the Phone “End” button on the steering wheel. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call.
button on the touchscreen or the Phone “End”
button to toggle between
PHONE MODE 59
Redial
Press the “Redial” button on the touchscreen, or push the “VR” button and after the “Listening” prompt and the following beep, say “Redial.”
The Uconnect Phone will call the last number that was dialed from your mobile phone.
Call Continuation
Call continuation is the progression of a phone call on the Uconnect Phone after the vehicle ignition has been switched to OFF.
NOTE: The call will remain within the vehicle audio system until the phone becomes out of range for the Bluetooth connection. It is recommended to press the “transfer” button on the touchscreen when leaving the vehicle.
ADVANCED PHONE CONNECTIVITY
Transfer Call To And From Mobile Phone
The Uconnect Phone allows ongoing calls to be transferred from your mobile phone to the Uconnect Phone without terminating the call. To transfer an ongoing call from your
5
60 PHONE MODE
connected mobile phone to the Uconnect Phone or vice versa, press the “Transfer” button on the Phone main screen.
Connect Or Disconnect Link Between The Uconnect Phone And Mobile Phone
If you would like to connect or disconnect the Bluetooth connection between a Uconnect Phone paired mobile phone and the Uconnect Phone, follow the instructions described in your mobile phone User’s Manual.
THINGS YOU SHOULD KNOW ABOUT YOUR UCONNECT PHONE
Ensure that no one other than you is speaking during a voice command period.
Performance is maximized under:
Low-To-Medium Blower Setting
Low-To-Medium Vehicle Speed
Low Road Noise
Smooth Road Surface
Fully Closed Windows
Dry Weather Condition
Voice Command
For the best performance:
Adjust the rearview mirror to provide at least ½ inch (1 cm) gap between the overhead console (if equipped) and the mirror.
Always wait for the beep before speaking.
Speak normally, without pausing, just as you would
speak to a person sitting a few feet/meters away from you.
WARNING!
ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the Uconnect features and appli­cations in this vehicle. Only use Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury or death.
Even though the system is designed for many languages and accents, the system may not always work for some.
NOTE: It is recommended that you do not store names in your favorites phonebook while the vehicle is in motion.
Phonebook (Mobile and Favorites) name recognition rate is optimized when the entries are not similar. You can say “O” (letter “O”) for “0” (zero).
Even though international dialing for most number com­binations is supported, some shortcut dialing number combinations may not be supported.
Far End Audio Performance
Audio quality is maximized under:
Low-To-Medium Blower Setting
Low-To-Medium Vehicle Speed
Low Road Noise
PHONE MODE 61
Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume.
In a convertible vehicle, system performance may be compromised with the convertible top down.
Bluetooth Communication Link
Mobile phones have been found to lose connection to the Uconnect Phone. When this happens, the connection can generally be re-established by switching the mobile phone OFF/ON. Your mobile phone is recommended to remain in Bluetooth ON mode.
Power-Up
After switching the ignition key from OFF to either the ON or ACC position, or after a language change, you must wait at least 15 seconds prior to using the system.
5
Smooth Road Surface
Fully Closed Windows
Dry Weather Conditions
Operation From The Driver’s Seat
Performance such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the Uconnect Phone.
General Information
The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
62 PHONE MODE
2. This device must accept any interference received, in-
cluding interference that may cause undesired opera­tion.
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

VOICE RECOGNITION QUICK TIPS

CONTENTS
m INTRODUCING UCONNECT . . . . . . . . . . . . . . . .64
m CLIMATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
m GET STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . .64
m BASIC VOICE COMMANDS . . . . . . . . . . . . . . . . .65
m RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
m MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
m PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
m APPLE CARPLAY. . . . . . . . . . . . . . . . . . . . . . . . .68
m ANDROID AUTO. . . . . . . . . . . . . . . . . . . . . . . . .69
m GENERAL INFORMATION. . . . . . . . . . . . . . . . . .70
m ADDITIONAL INFORMATION . . . . . . . . . . . . . . .71
6
64 VOICE RECOGNITION QUICK TIPS
INTRODUCING UCONNECT
Start using Uconnect Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect 4 system.
GET STARTED
All you need to control your Uconnect system with your voice are the buttons on your steering wheel.
5. You can interrupt the help message or system prompts by pushing the VR or Phone button and saying a Voice Command from current category.
1. Visit
UconnectPhone.com
to check mobile device and feature compatibility and to find phone pairing instruc­tions.
2. Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition.
3. Speak clearly at a normal pace and volume while facing straight ahead. The microphone is located in the head­liner and aimed at the driver.
4. Each time you give a Voice Command, you must first push either the VR or Phone button, wait until after the beep, then say your Voice Command.
Uconnect Voice Command Buttons
1 — Push To Initiate Or To Answer A Phone Call, Send Or Receive A Text 2 — For All Radios: Push To Begin Radio, Media Functions, Apps And Climate Functions. 3 — Push To End Call
BASIC VOICE COMMANDS
The basic Voice Commands below can be given at any point while using your Uconnect system.
VOICE RECOGNITION QUICK TIPS 65
Push the VR button
Cancel to stop a current voice session
Help to hear a list of suggested Voice Commands
Repeat to listen to the system prompts again
Notice the visual cues that inform you of your voice recognition system’s status. Cues appear on the top of the touchscreen.
. After the beep, say{
RADIO
Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio stations you would like to hear. (Subscrip­tion or included SiriusXM Satellite Radio trial required.)
Push the VR button
Tune to ninety-five-point-five FM
Tune to Satellite Channel Hits 1
. After the beep, say{
6
66 VOICE RECOGNITION QUICK TIPS
TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, push the VR button
and say “Help.” The system will provide you with a list of commands.
MEDIA
Uconnect offers connections via USB, Bluetooth and auxil­iary ports (If Equipped). Voice operation is only available for connected USB and AUX devices. (Remote CD player optional and not available on all vehicles.)
Push the VR button
. After the beep, say one of the following commands and follow the prompts to switch your media source or choose an artist.
Change source to Bluetooth
Change source to AUX
Change source to USB
Play artist Beethoven; Play album Greatest Hits; Play
song Moonlight Sonata; Play genre Classical
TIP: Press the Browse button on the touchscreen to see all
of the music on your USB device. Your Voice Command must match exactly how the artist, album, song and genre information is displayed.
PHONE
Making and answering hands-free phone calls is easy with Uconnect. When the Phonebook button is illuminated on your touchscreen, your system is ready. Check UconnectPhone.com pairing instructions.
for mobile phone compatibility and
VOICE RECOGNITION QUICK TIPS 67
Call John Smith
Dial 123-456-7890 and follow the system prompts
Redial (call previous outgoing phone number)
Call back (call previous incoming phone number)
TIP: When providing a Voice Command, push the Phone button exactly as it appears in your phone book. When a contact has multiple phone numbers, you can say “Call John Smith work.”
and say “Call,” then pronounce the name
6
Push the Phone button following commands{
. After the beep, say one of the
68 VOICE RECOGNITION QUICK TIPS
CLIMATE
Too hot? Too cold? Adjust vehicle temperatures hands-free and keep everyone comfortable while you keep moving ahead. (If vehicle is equipped with climate control.)
TIP: Voice Command for Climate may only be used to adjust the interior temperature of your vehicle. Voice Command will not work to adjust the heated seats or steering wheel if equipped.
Push the VR button
. After the beep, say one of the
following commands:
Set driver temperature to 70 degrees
Set passenger temperature to 70 degrees
APPLE CARPLAY
Apple CarPlay allows you to use your voice to interact with Siri through your vehicle’s voice recognition system, and use your smartphone’s data plan to project your
iPhone and a number of its apps onto your Uconnect touchscreen. Connect your iPhone 5, or higher, to one of the media USB ports, using the factory-provided Lightning cable, and press the new CarPlay icon that replaces your “Phone” icon on the main menu bar to begin Apple CarPlay. Press and hold the VR button on the steering wheel, or press and hold the “Home” button within Apple CarPlay, to activate Siri, which recognizes natural voice commands to use a list of your iPhone’s features:
Phone
VOICE RECOGNITION QUICK TIPS 69
Music
Messages
Maps
Additional Apps
6
ANDROID AUTO
Android Auto allows you to use your voice to interact with Android’s best-in-class speech technology through your vehicle’s voice recognition system, and use your smart­phone’s data plan to project your Android powered smart­phone and a number of its apps onto your Uconnect touchscreen. Connect your Android 5.0 (Lollipop), or higher, to one of the media USB ports, using the factory­provided USB cable, and press the new Android Auto icon
70 VOICE RECOGNITION QUICK TIPS
that replaces your “Phone” icon on the main menu bar to begin Android Auto. Push and hold the VR button on the steering wheel, or press and hold the “Microphone” icon within Android Auto, to activate Android’s VR, which recognizes natural voice commands, to use a list of your smartphone’s features:
Maps
Music
Phone
Text Messages
Additional Apps
GENERAL INFORMATION
The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, in­cluding interference that may cause undesired opera­tion.
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ADDITIONAL INFORMATION
© 2017 FCA US LLC. All rights reserved. Mopar and Uconnect are registered trademarks and Mopar Owner Connect is a trademark of FCA US LLC. Android is a trademark of Google Inc. SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc.
Uconnect System Support:
U.S. residents visit DriveUconnect.com or call:
1-877-855-8400(24 hours a day 7 days a week)
Canadian residents call: 1-800-465-2001(English) or
1-800-387-9983(French)
VOICE RECOGNITION QUICK TIPS 71
6
Loading...