Panasonic Video Wall Construction Manual

Video Wall

Construction Manual

Contents

●Unpacking 3

●Installation

Cautions when installing or moving Wall-mounting bracket

Installation of mounting bracket 7 Cautions of Video Wall installation 9 Embedding condition 13 Connection to power source 17 Daisy Chain Connection

Remote controller IR signal outreach distance

●Picture adjustment Color Calibration 25

●Maintenance Maintenance 26

4 6

18 24

Unpacking

Unpacking Procedure

１

Joint （front and back/Each 2 points）

Remove Joint(Total ４)

３

２

Accessory parts

Take out accessory parts and cushions

Front Side

Remove upper carton case and front cushions

４

Remove a protection bag

Cautions 1

・ Please do not move with the monitor as an upswing or a downswing.

Handle

・Grab the handles when working. ・Do not take hold any part except the handles. ・Do not touch top/down/left/right side and

Cautions 2

： No Good

： OK

also surface of the monitor.

・Do not stand on the floor directly

with surface or rear side of the monitor.

・Do not make impacts to the monitor.

Do not twist the monitor.

Wall-mounting bracket

When preparing bracket for multiple monitors, please take the follo wing consid erations.

1) Ensure the wall on which the monitors will be i nstall ed has a smooth surface.

2) Ensure the bracket used to attach the monitors to the wall have enough load capacity to support them.

3) Ensure the bracket used can be adjusted upward, downward, to the left and right, forward and backward.

4) When installing or moving, ensure the bracket does not interfere with the back of

the monitor, cable guides, and other structures.

5) Ensure the bracket is constructed so that the monitor can easily be removed.

6) Please do not distort the monitor.

Caution

If you can not install in the same way as this manual, please contact Panasonic sales company.

Installation of mounting bracket 1

- 16mm longer than the thickness of the mounting bracket) and tighten them securely.

There are L type protection board (downside) and protection film (monitor surface). Please remove them.

Installation of mounting bracket 2

There is a limitation of maximum units using optional mounting bracket, when we install video walls.

・ TH-55VF2H/VF2 : 4row/5column ・ TH-55VF1H : 5row/6column ・ TH-55LFV9/LFV8 : 9row/11column

Column

for example

Row

Please set a position dial (up, down, left and right) of the starting bracket to eccentric position of installation direction side, not a center (default) position.

+ 18 hidden pages