Panasonic VDR-D300, VDR-D300EG, VDR-D300E, VDR-D300EB, VDR-D300EP Service Manual
...
DVD Video Camcorder
VDR-D300EG
VDR-D300E
VDR-D300EB
VDR-D300EP
VDR-D300EE
VDR-D300GC
VDR-D300GN
ORDER NO.VM0603011CE
VDR-D300SG
VDR-D300GCS
VDR-D308GK
VOL.1
Colour
(S)....................Silver Type
© 2006 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
VDR-D300EG / VDR-D300E / VDR-D300EB / VDR-D300EP / VDR-D300EE / VDR-D300GC / VDR-D300GN / VDR-D300SG / VDR-D300GCS / VDR-D308GK
8 Disassembly and Assembly Instructions
8.1. Disassembly Frow Chart
This flow chart indicates the disassembly steps the cabinet parts, P.C.B. and Mecha. Unit in order to access to be serviced.
When reinstalling, perform the steps in the reverse order.
28
VDR-D300EG / VDR-D300E / VDR-D300EB / VDR-D300EP / VDR-D300EE / VDR-D300GC / VDR-D300GN / VDR-D300SG / VDR-D300GCS / VDR-D308GK
8.2. P.C.B. Layout
Fig. F1
29
VDR-D300EG / VDR-D300E / VDR-D300EB / VDR-D300EP / VDR-D300EE / VDR-D300GC / VDR-D300GN / VDR-D300SG / VDR-D300GCS / VDR-D308GK
8.3. Disassembly Procedures
Flow-Chart for Disassembly Procedure
No. Item / Part Fig. Removal (Screw,Connector,FPC.
1 FRONT UNIT &
FRON P.C.B.
2 SIDE R/LCD
UNIT
3 REAR/EVF
UNIT
4 LENS UNIT Fig.D11 FP6001, FP6002
5 MAIN
SHIELD/JACK
UNIT
6 DVD DRIVE
UNIT, SIDE L
/OPERATION
UNIT
7 FRONT P.C.B. Fig.D16 FP6502
8 LCD UNIT Fig.D17 2-Screws (T)
9 SIDE R UNIT,
SIDE R P.C.B.
10 MONITOR
P.C.B.
11 EVF UNIT Fig.D23 1-Screw (Y)
Fig.D2 Detach the Grip Belt
Fig.D3 3-Screws (A)
Shoe Plate
1-Screws (B)
3-Tabs
Shoe Base
Fig.D4 Open the LCD Unit
1-Screw (D)
Fig.D5 1-Screw (D), 1-Screw (E)
Fig.D6 Open the Jack Cover
3-Screws (F)
Fig.D7 2-Tabs
FP6501
Remove the Front Unit &
Front P.C.B. in the direction of the
arrow.
Fig.D8 3-Screws (G)
Fig.D9 3-Screw (H)
Support Angle
2-Screws (I), 1-Screw (J)
FP1, FP4
Side R/LCD Unit
Fig.D10 Slide out the EVF.
6-Screws (K)
FP2, FP5
Rear/EVF Unit
1-Screw (L)
Lens Unit
Fig.D12 FP3
4-Screws (M), 1-Screw (N)
Drive FPC (B2401)
Main Shield Unit
1-Screw (O)
Flash Trigger Unit
Fig.D13 Disk Cover Lock FPC
Slide the Lock Lever of Disk
Cover
Lock Unit to open the Disk Cover
Fig.D14 1-Screw (P), 1-Screw (Q)
Disk Cover Lock Unit
Fig.D15 1-Screw (R)
DVD Drive Unit, Side L/
Operation Unit
3-Screws (S)
Front P.C.B.
Side R Piece
1-Screw (U)
LCD Open SW
Fig.D18 Open the LCD, and Turn the LCD.
2-Screws (V)
LCD Unit, 2-Earth Plates
Fig.D19 5-Screws (W)
Speaker Plate
Side R Unit, Side R P.C.B.
Fig.D20 2-Screws (X)
6-Tabs
LCD Case A unit
Fig.D21 FP902
Shaft Case Unit, LCD Earth Spring
Fig.D22 FP903
3-Tabs
Monitor P.C.B.
Roll up the EVF FPC, and pull out
the EVF Unit in the direction of
the arrow.
& Other)
No. Item / Part Fig. Removal (Screw,Connector,FPC.
& Other)
12 EVF P.C.B. Fig.D24 Rib (1) of EVF Case Unit removed
from the slot of EVF Slide Base
Unit, Rib (2) of EVF Case Unit is
removed by twisting EVF Case
Unit in the direction of the arrow.
EVF Case Unit, EVF Slide Base
Unit
Fig.D25 2-Tabs
EVF LCD Panel Unit
Fig.D26 FP952
4-Tabs
EVF P.C.B.
13 JACK P.C.B. Fig.D27 1-Screw (Z)
B7001, B2
Jack P.C.B.
14 SUB P.C.B. Fig.D28 P6601, P6602
Release the Cable of Flash
Trigger from Heat Sink Unit.
1-Screw (a)
2-Tabs
Shield Plate
2-Screws (b)
Main/Sub/Flash Board Unit
Fig.D29 B4, PS6001
Sub P.C.B.
15 MAIN P.C.B. Fig.D30 2-Screws (c)
B5, B6001
Main P.C.B., Flash Board Unit
16 FLASH P.C.B. Fig.D31 2-Tabs
Capacitor Holder A, Capacitor
Holder B
Flash P.C.B.
30
Loading...