Panasonic UB-5320, UB-5820 Operating Instructions Manual
Electronic Board
[Stand (option)] [Wall-mounting (option)]
English
中 文
Operating Instructions
With Installation Manual
The unit in the picture is UB-5320.
Stand and Wall-mounting kit are optional.
(for qualified service personnel)
Operating Instructions Installation Manual
Model No. UB-5320
UB-5820
English. . . . . . . . . . . . . . . . . 1–45
中 文 . . . . . . . . . . . . . . . . . 47–91
• To assemble this unit, please refer to the Installation Manual.
• Before operating this unit, please read these instructions completely and keep them carefully for future reference.
Thank you for purchasing the Panasonic Electronic Board.
For optimum performance and safety, please read these instructions carefully.
Record these items for future reference
Model number: _________________________ Date of purchase: ________________________
Serial number: _________________________ Dealer’s name: __________________________
Dealer’s address: ______________________________________________________________________
Te l:
Accessories
Q’ty
• Markers (red, black, and blue). . . . . . . 1 each
• Operating Instructions . . . . . . . . . . . . . . 1
• Eraser . . . . . . . . . . . . . . . . . . . . . . 1
• Power cord. . . . . . . . . . . . . . . . . . . . 1
* Letter size is for U.S.A. and Canada models.
• The stand and wall-mounting kit are optional. By way of example, this manual describes an Electronic
Board which is used with the stand.
• USB cable is not included.
• Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
• IBM and AT are trademarks of International Business Machines Corporation in the United States, other countries,
or both.
• Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and
other countries.
• Adobe, Acrobat, Acrobat Reader and Reader are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
• All trademarks referred to in this manual are property of their respective companies.
• A4 (Letter*) size copy paper roll (10 m) . . . . . 1
• Software CD-ROM. . . . . . . . . . . . . . . . 1
Q’ty
• This software is based in part of the work of the IndependentJPEG Group.
• This software is based on the “libtiff” which has the following copyrights:
Copyright (C) 1988-1997 Sam Leffler
Copyright (C) 1991-1997 Silicon Graphics, Inc.
The information given in this Operating Instructions is subject to change without notice.
Warning about saving data
When the system storage device or any of its optional storage device is adversely effected by operational
errors, static electricity, electrical noise, vibration, dust or when the power has been cut off due to malfunction,
repair or inadvertently, the memory contents may be lost or changed. Before operating the system, make a
point of reading the precautionary notes in the Operating Instructions and the help information, and observe
them during operation.
Please observe carefully the following precaution:
• Make absolutely sure that all important data is saved by back-up or the original is saved.
The manufacturer hereby declares that it cannot be held accountable for any loss or change in any data
stored on floppy disks, hard disks, optical disks, or other memory devices.
2
Table of Contents
Page
For Your Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
English
Before
You S tar t
Using
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
• Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Loading Copy Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Copy types and procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Computer Interfacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• Contents of CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• Installing Drivers / Board Image Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• Installing Quick Image Navigator / Panasonic-DMS . . . . . . . . . . . . . . . . . . . . 15
• Removing Drivers / Board Image Capture / Quick Image Navigator . . . . . . . . 15
• Removing Panasonic-DMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Scanning with the Board Image Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Scanning with the Quick Image Navigator / Panasonic-DMS . . . . . . . . . . . . . 17
• Panaboard Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
• Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Operating Instructions
Help
Daily Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
• Cleaning the screen and the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
• Caring for the eraser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
• Cleaning the printer head and paper feed roller. . . . . . . . . . . . . . . . . . . . . . . . 21
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
• Meanings of error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
• Option and Separately available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3
For Your Safety
How to replace the fuse:
Open the fuse compartment
with a screwdriver and
replace the fuse.
For Your Safety
English
CAUTION:
TO PREVENT RISK OF ELECTRIC SHOCK
HAZARD, DO NOT REMOVE THE COVER OF THIS
PRODUCT, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE
OF MOISTURE.
THE SOCKET-OUTLET MUST BE NEAR THIS
EQUIPMENT AND MUST BE EASILY ACCESSIBLE.
The product should be used only with the power cord
that is supplied by the manufacturer.
Stop operation immediately if your product emits
smoke, excessive heat, abnormal smell or unusual
noise. These conditions can cause fire or electric
shock. Immediately turn the product off and unplug
the power cord, and contact your dealer for service.
• (220–240 V equipment)
A certified power supply cord has to be used with this
equipment. The relevant national installation and/or
equipment regulations shall be considered. A certified
power supply cord is not lighter than ordinary polyvinyl
chloride flexible cord according to IEC 60227
(designation H05VV-F 3G 1.0 mm
CLASS 1 LED PRODUCT
Für Benutzer in der BRD
Hinweis:
Maschinenlärminformations-Verordnung - 3. GPSGV, der
höchste Schalldruckpegel beträgt <
gemäss EN ISO 7779.
2
).
70 dB (A) oder weniger
For users in
the United Kingdom only
Safety Information
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5 amp. fuse is fitted in this plug. Should the fuse need
to be replaced please ensure that the replacement fuse
has a rating of 5 amps. and that it is approved by ASTA
or BSI to BS1362. Check for the ASTA mark or the
BSI mark on the body of the fuse. If the plug
contains a removable fuse cover you must ensure that it
is refitted when the fuse is replaced. If you lose the fuse
cover the plug must not be used until a replacement
cover is obtained. A replacement fuse cover can be
purchased from your local Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket
outlet in your home then the fuse should be removed
and the plug cut off and disposed of safely.
There is a danger of severe electrical shock if the cut off
plug is inserted into any 13 amp. socket.
If a new plug is to be fitted please observe the wiring
code as shown below. If in any doubt please consult a
qualified electrician.
WARNING: This appliance must be earthed.
IMPORTANT: The wires in this mains lead are coloured
in accordance with the following code.
Green-and-Yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows.
The wire which is coloured Green-and-Yellow must be
connected to the terminal in the plug which is marked
with the letter E or by the Earth symbol or coloured
Green or Green-and-Yellow.
The wire which is coloured Blue must be connected to
the terminal in the plug which is marked with the letter N
or coloured Black.
The wire which is coloured Brown must be connected to
the terminal in the plug which is marked with the letter L
or coloured Red.
Das Gerät ist nicht für die Benutzung im
unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz
vorgesehen.
Um störende Reflexionen am Bildschirmarbeitsplatz
zu vermeiden, darf dieses Produkt nicht im
unmittelbaren Gesichtsfeld platziert werden.
4
Precautions
English
Precautions
Never remove the cover, take apart or modify the
product. This will void the warranty.
Do not put drinks, other liquids or heavy items on the
tray or screen.
Do not position the electronic board in a location where
it is unstable.
Operating Instructions
After installing or moving the electronic board, lock the
casters and set the fall-prevention extension legs.
Do not use the electronic board in an excessively
humid or dusty location.
Push to lock
Locking the casters
(Push this side)
If the electronic board is not going to be used for an
extended period of time (e.g., during extended
holidays), turn off the power and remove the plug from
the wall outlet.
5
Precautions
Do not lean against the screen or on the cover (lower),
even if the electronic board is mounted on the wall.
CHOKING HAZARD
Keep the marker’s cap out of reach of
children to prevent swallowing.
■ CD-ROM
To prevent the CD-ROMs from accidental damages:
Have the unit installed, removed and
disposed of only by qualified service
personnel.
When the unit will no longer be used, in order
to prevent it from falling, do not leave the unit
installed, but remove it. If the unit falls, it can
cause injury.
Do not touch or write on the surface
of the disc.
Do not place heavy objects on the
disc case or drop the case.
Do not leave the disc out of the
protective case.
To clean the disc, hold the disc by
its edges and wipe it from the
center to the edges with a dry, soft
cloth.
Do not leave the disc in direct
sunlight or near heat sources.
6
Precautions
Installation • Do not install the unit where it may be exposed to direct sunlight, near heating
equipment, or near air-conditioning vents as this may cause stretching and/or
discoloration of the screen.
• Do not install the unit in strong sunlight or strong lighting. Proper copying may
become impossible.
• Do not install the unit in locations where the temperature may change suddenly as
this may disable the unit’s ability to make copies.
English
Screen Film • Make thick and dark lines inside the copying
area. Note that any writing inside the shaded
area (on right) cannot be copied.
• Do not allow writing to remain on the screen for
an extended period of time as it will become
harder to erase.
• Do not touch the screen, write with markers, or
erase while the screen is moving as this may result in damage to the unit.
• Do not erase with an overly dirty eraser (see page 20).
• Do not attach chart paper to the screen film for copying as this may result in
damage to the unit.
Markers,
Erasers and
Copy Paper
• Use only the included or designated markers, erasers and copy paper.
(See page 24.)
Use of accessories other than those included or designated (such as oil-based
markers) may damage the screen or result in hard-to-erase markings.
• Store markers horizontally as vertical storage may stop the ink from coming out.
• Store a copy paper roll in a cool, dark, moisture free location.
• Do not store printed copies exposed to direct sunlight or high humidity, or inside
vinyl chloride (plastic) files.
35 mm
25 mm
Copying area
25 mm
35 mm
Operating Instructions
• For long-term storage, make another copy with an ordinary paper copier machine.
Power Cord • The included power cord is for use with this unit only. Do not use it with other
devices.
• When moving the unit, disconnect the power cord from the electrical power socket
and from the printer’s power connector and coil it for transportation as stepping on
the power cord or having it catch on something during movement may result in
damage to the cord.
USB Cable • Use a shielded USB cable that is certified as logo by USB-IF.
• If you connect the electronic board to a USB hub, it is not guaranteed to work.
• Do not connect two or more Panasonic electronic boards to a computer. It may
cause the computer operation to become unstable.
7
Part Names and Functions
Part Names and Functions
Scanner
Screen
Printer
Output Port
USB Connector
(See page 13.)
Printer Door
Open this door to load
copy paper or to remove
jammed paper.
(See pages 10, 12.)
Copied Paper Holder
This holder holds up to 5
sheets of output paper.
Tray
Stand
The stand is optional.
Control Panel
(See page 9 for details.)
Power Switch
(ON)
(OFF)
AC Inlet
PU
S
H
O
P
E
N
Power Cord
Door Open
Button
Push this button to open
the printer door.
PUSH OPEN
8
■ Control panel
Contrast Indicator
English
Part Names and Functions
Advance Key
Copy Key
Contrast Key
2-Screen Copy Key
Multi-Copy/Error Indicator
Panel Name Description
This lamp indicator displays the printing contrast used during
Contrast
Indicator
Contrast
Key
2-Screen
Copy Key
Multi-Copy/
Error
Indicator
Multi-Copy/
Stop Key
copying.
Indicator off: Normal printing contrast
Indicator on: Darker than normal printing contrast
Each time this key is pressed, the unit will alternate between
normal and dark contrast modes (Normal/Dark).
This key causes the front and back of the screen to be copied on
a single sheet of paper.
This indicator displays the number of copies to be made. The
display changes each time the Multi-Copy/Stop Key is pressed.
Example: 1 → 2 → ··· → 9 → 1 → ···
When an error occurred, a flashing symbol will appear in this display to
indicate the error status. (See page 23.)
When making multiple copies, press this key until the desired
number of copies is displayed on the Multi-Copy/Error Indicator.
This key can also be pressed to stop copying while executing
multiple copies.
• The display changes as shown below each time the screen is copied. After
reaching 0, the display will reset to 1.
Example: 5 → 4 → 3 → 2 → 1 → 0 → 1 (Number is counted down.)
Multi-Copy/Stop Key
Operating Instructions
Copy Key
Advance
Key
This key causes the screen to be copied.
Pressing this key advances the screen from right to left.
9
Loading Copy Paper
Loading Copy Paper
Set the power switch to on ( I ).
1
• “ ” will flash on the Multi-Copy/Error
Indicator when copy paper has run out.
• The screen will move to home position and
stop.
Note
• Use copy paper roll with a core diameter
of 25.4 mm (1 inch) or more. Using a copy
paper roll with a smaller core could cause
paper jams.
Pass the paper over the paper feed roller and
4
under the cutter cover, then through the output
port about 4 cm.
POW
PUSH OPE
N
Push the door open button and open the
2
printer door.
• If there is any copy paper remaining in the
copy paper compartment, remove it.
Door
Open
Button
PUSH OPEN
Copy paper
compartment
Open
the printer door
3
the copy paper roll with
, then move
up
prevent paper roll from falling.
(Loosen about 15 cm as shown and load it.)
the printer door
to
position B
smooth side facing
to
Smooth side
R
E
and load
position A
to
Paper feed
roller
Cutter cover
About 4 cm
Close the printer door securely, using two
5
hands.
Note
• Once the door is closed, paper will feed and
automatically cut. Remove and discard the
small piece of paper.
Load a new roll when:
• Red bands become visible at the edge of the copy
paper.
• The Multi-Copy/Error Indicator flashes “ ” even if
the printer door is closed properly.
10
About
A
B
Wrong direction
15 cm
Making Copies
This section describes how to copy text and
illustrations drawn on the screen.
Set the power switch to on ( I ).
1
• “ ” will light on the Multi-Copy/Error
Indicator to indicate that the unit is ready to
copy.
• The screen will move to home position and
stop.
English
Making Copies
Note
• While copying, do not touch the paper,
otherwise the paper may jam.
• Text or images in shades of yellow will not
copy.
■ Copy types and procedures
[A] Copying the front of the screen
Operating Instructions
1) Press .
[B] Copying the back of the screen
POW
PUSH OPEN
Note
• When the Multi-Copy/Error Indicator flashes
“ ”, refer to “Loading Copy Paper” on
page 10.
Press the Copy Key .
2
• Text and illustrations on the screen will be
copied and copies emerge from the output
port.
• The copied paper holder can hold up to 5
copies.
(Note that exceeding the copied paper
holder’s capacity may result in paper jams.)
• For details on making multiple copies, 2screen copies and so on, see “Copy types
and procedures” on this page.
R
E
1) Press to move the screen to be copied
to the front.
2) Press .
[C] Making multiple copies (up to 9)
1) Select the number of copies (1 to 9) by
pressing as necessary.
2) Press .
•Press
to stop copying in mid-operation.
[D] Making 2-screen copies
Copying the front and back of the screen on a
single sheet of paper
1) Press .
Output paper
PUSH OPEN
11
Paper Jams
r
Paper Jams
To release jammed paper:
Push the door open button and open the
1
printer door.
Door
Open
Button
Pass the paper over the paper feed roller and
4
under the cutter cover, then through the output
port about 4 cm. (Refer to step 4 on page 10.)
In case paper cannot go through, just put the
paper on the paper feed roller and insert the
top of the paper in the cutter cover as shown
in the figure.
PUSH OPEN
Remove the jammed paper by pulling the
2
paper roll to the direction A. If the jammed
paper is still in the cutter cover, remove it
using tweezers from slot B.
A
Cutter cove
Slot B
Cut the paper straight as shown in the figure.
3
Paper feed
roller
Cutter cover
Close the printer door securely, using two
5
hands.
Note
• Use copy paper roll with a core diameter of
25.4 mm (1 inch) or more. Using a copy
paper roll with a smaller core could cause
paper jams.
• Once the door is closed, paper will feed and
automatically cut. Remove and discard the
small piece of paper.
12
Cut
English
Computer Interfacing
Drivers and software must be installed in your
computer to use Board Image Capture, Quick Image
Navigator, Panasonic-DMS, printer and TWAIN driver.
■ System requirements
Computer
IBM® PC/AT® or compatible
machine with a CD-ROM drive
Computer Interfacing
■ Contents of CD-ROM
The provided CD-ROM includes the following
items.
• USB driver
• Printer driver
• TWAIN driver
• Board Image Capture
Allows you to scan hand-written text and
diagrams on the Panaboard and save the
scanned image as a PDF file.
• Electronic board operating instructions
CPU Pentium® II or higher processor
1
Interface USB 2.0 or USB 1.1
Windows® 98*
Windows 2000*
OS
Windows Vista®*
*
2
/ Windows Me*3 /
4
/ Windows XP*5 /
6
/ Windows 7*
7
(Windows XP 64-bit edition is not
supported.)
128 MB or more (Windows 98 /
Windows Me)
Memory
256 MB or more (Windows 2000 /
Windows XP / Windows Vista /
Windows 7)
HD
*1This electronic board does not function with Hi-Speed
USB 2.0. Even if using a computer equipped with HiSpeed USB 2.0, this electronic board functions with
Full Speed USB 2.0.
2
Microsoft® Windows® 98 operating system
*
(hereafter Windows 98)
*3Microsoft® Windows® Millennium Edition operating
system (hereafter Windows Me)
*4Microsoft® Windows® 2000 operating system
(hereafter Windows 2000)
5
Microsoft® Windows® XP operating system
*
(hereafter Windows XP)
*6Microsoft® Windows Vista® operating system
(hereafter Windows Vista)
*7Microsoft® Windows® 7 operating system
(hereafter Windows 7)
At least 200 MB free space (except
saving space for data files)
Note
• The “menu” window contains links to “Quick
Image Navigator”, “Panasonic-DMS” and
“Adobe® Reader®”.
Notes when connecting the
electronic board to a computer
• First install the USB, printer and TWAIN driver to
your computer, then connect the electronic board
to the computer (refer to “Installing Drivers /
Board Image Capture” on page 14).
• If you connect the electronic board to a USB hub,
it is not guaranteed to work.
• Do not connect two or more Panasonic electronic
boards to a computer. It may cause the computer
operation to become unstable.
• Use a shielded USB cable that is certified as logo
by USB-IF.
Operating Instructions
• The system requirements above do not meet the
recommended specifications of all operating
systems and of the included software.
13
Computer Interfacing
■ Installing Drivers / Board Image Capture
The USB, printer, TWAIN driver and Board Image
Capture are installed in your computer by following
procedures.
Note
• Do not yet connect a USB cable to the
electronic board.
1 Power on your computer and start Windows*
• Log on as an administrator for Windows 2000,
Windows XP, Windows Vista or Windows 7.
*1Microsoft® Windows® operating system
(hereafter Windows)
2 Insert the CD-ROM into the CD-ROM drive.
The Setup window appears automatically.
• Depending on the operating system or the
settings that you are using, the Setup
window may not appear automatically.
In such a case, execute “Menu.exe” in the
CD-ROM from the Explorer.
• If the Autoplay dialog box appears in Windows
Vista or Windows 7, click “Run Menu.exe”.
3 When “Welcome” window appears, click
[Next].
4 Click [Install Panaboard Software].
5 Read “End-User License Agreement” carefully
and click [Yes].
6 When the following window appears, check
that the electronic board is not connected to
your computer and click [OK].
1
.
• If “Windows can't verify the publisher of this
driver software” is displayed in Windows
Vista or Windows 7, select “Install this driver
software anyway” to continue the installation.
• For Windows 98 or Windows Me, a floppy
disk or CD-ROM for installing the operating
system may be required
• If the screen prompts to restart Windows,
restart Windows.
.
14
• If “User Account Control” window is
displayed in Windows Vista, select
[Continue] to continue the installation.
• If “User Account Control” window is
displayed in Windows 7, click [Yes] to
continue the installation.
• To read the operating instructions in the
provided CD-ROM, the Adobe Reader or
Acrobat® Reader must be installed in your
computer. It can be downloaded from the
Adobe's Web site if Internet is available.
7
When the following window appears after files are
copied, power the electronic board on, and connect a
USB cable from the electronic board to your computer.
Loading...