Panasonic TH-42LF8W User Manual

42-inch Class FULL HD LCD Display

TH-42LF8W

(design and specification subject to change without notice)

Product specification

■ DISPLAY PANEL

Screen Size (Diagonal) 42-inch (1064 mm) Panel type IPS / Edge-LED Aspect ratio 16:9 Effective Display Area (W x H) 927 x 521 mm Number of pixels (H ｘ V) 1920 x 1080 pixels Brightness 500 cd/m Contrast Ratio 1300:1 Dynamic Contrast 50000:1 Response Time 8 ms (G to G) Viewing Angle (Horizontal / Vertical) 178° / 178° (CR ≧ 10) Panel Surface Treatment Anti glare (Haze 10%) Panel Life Time*

*1 When the panel lifetime is at 50% of the brightness under the condition of 25 degrees Celsius (+/- 2 degrees celsius).

■ CONNECTION TERMINAL

HDMI IN HDMI Type A Connector x 2 Linear PCM

COMPONENT/RGB IN BNC x 1 set Y/G :

AUDIO IN Stereo Mini Jack (M3) x 1 (Shared with VIDEO IN) VIDEO IN BNC x 1 (Shared with COMPONENT/RGB Y/G) 1.0 Vp-p (75 Ω )

AUDIO IN Stereo Mini Jack (M3) x 1 (Shared with COMPONENT IN) DVI-D IN DVI-D 24-pin x 1 AUDIO IN Stereo Mini Jack (M3) x 1 (Shared with PC IN) DVI-D OUT DVI-D 24-pin x 1 PC IN Mini D-Sub 15-pin x 1 (Female) Y/G

AUDIO IN Stereo Mini Jack (M3) x 1 (Shared with DVI-D IN) SERIAL IN/OUT D-sub 9pin x 1/ x 1, RS-232C Compatible LAN RJ45 x 1 10BASE-T / 100BASE-TX, Compatible with PJLink IR TRANSMITTER IN / OUT Stereo Mini Jack (M3) x 1 / x 1 AUDIO OUT Stereo Mini Jack (M3) x 1 Variable (- ∞ - 0 dB) (1 kHz 0 dB Input,10 k Ω Load) 0.5 Vrms USB USB 2.0 Type A connector x 1 DC 5 V/1A (USB3.0 Incompatible）

*Due to the construction of terminal, some types of connecting cable or USB memory device cannot be used. Be sure to make confirmation with reference to the detailed drawing of terminal in page 4.

■ SPEAKER

Built in Speaker 20 Ｗ［10 Ｗ +10 Ｗ］

■ ELECTRICAL

Power Requirements 220 - 240 V AC　50 / 60 Hz Power Consumption 145 W On Mode Average Power Consumption* Power Off Condition approx. 0.3 W Stand-by Condition approx. 0.5 W Apparent power 155 VA

*Based on IEC 62087 Ed.2 measurement method

■ MECHANICAL

Dimemsions (W x H x D) 947 x 541 x 72 mm Dimemsions (W x H x D) Weight approx. 15.3 kg Bezel Color Black Bezel Width T/R/L/B : 6.3 mm Carton Dimensions (W x H x D) 1123 x 743 x 203 mm Gross Weight approx. 20.0 kg Cabinet Material / Color Metal / Black Pitch for Wall-Hanging

■ INSTALLATION REQUIREMENT

Orientation Landscape / Portrait Tilting Angle 0 - 45 degrees forward / backward with landscape / portrait setting

*Please contact your sales representative with regard to the tilt angle before installation.

■ ENVIRONMENTAL

Operating Environment Temperature : 0 ℃ to 40 ℃*1 : 0 ℃ to 35 ℃*

Storage Enviroment Temperature : -20 ℃ to 60 ℃

*1 : for up to 1400 m altitude　*2 : for between 1400 m and 2800 m altitude Depending on the temperature or humidity conditions, uneven brightness may be observed. This is not a malfunction.

・This unevenness will disappear while applying current continuously. If not, consult the distributor.

(Excluding handle part)

(Typ)

approx. 60000 hours (typ)

(Sampling frequency：48 kHz/44.1 kHz/32 kHz)

PB/CB/B:BNC Contact Plug without sync 0.7 Vp-p (75 Ω ) PR/CR/R :

0.5 Vrms

Compliance with DVI Revision 1.0　Compatible with HDCP 1.1

P P HD/VD

100 W

947 x 541 x 57 mm

VESA Compliant 200 x 200 mm (Installed by: M6 screws / Screw hole depth 10 mm)

Humidity : 20% to 80% (No condensation) Altitude : 0 to 2800 m

Humidity : 20% to 80% (No condensation)

BNC Contact Plug with sync 1.0 Vp-p (75 Ω)

BNC Contact Plug without sync 0.7 Vp-p (75 Ω )

: with sync 1.0 Vp-p (75 Ω ) : without sync 0.7 Vp-p (75 Ω ) : without sync 0.7 Vp-p (75 Ω )

B/CB

: without sync 0.7 Vp-p (75 Ω )

R/CR

: 1.0 - 5.0 Vp-p (high impedance)

0.5 Vrms

42-inch Class FULL HD LCD Display

TH-42LF8W

MAIN FEATURE

USB Media Player Yes Fail back ＆ Fail over Yes Data Cloning Yes Early Warning Software compatible

Multi Monitoring & Control Software compatible

Operating Time 24h / 7d Digital Zoom Multi Display Yes Power ON Screen Delay Yes 1:1 Pixel mode Yes Auto setup Yes Screen Saver Yes HDMI Power Management Yes PC Power Management Yes DVI-D Power Management Yes Input Lock Yes Button Lock Yes Remote-control User Level Yes Input Search Yes

In case of running for a long time, the moving image is recommended to be displayed. If you display a still picture for an extended period, the image retention might remain on the screen. However, image retention can gradually disappear by displaying a moving images.

Yes

DIMENSIONS

65.7186 695.3

STANDARD (CERTIFICATIONS)

SAFETY REGULATIONS IEC60950-1 RADIATION REGULATIONS EN55022:2010 Class A

EN55024:2010 EN61000-3-2:2006+A1:2009+A2:2009 class D EN61000-3-3:2013 AS/NZS CISPR22:2009

REMOTE CONTROL TRANSMITTER

Power Requirements

Operating distance approx. 7 m* Weight

Dimemsions (W x H x D)

*When operated directly in front of receptor.

DC 3 V (2 x AAA Size batteries)

approx. 63 g including batteries 44 x 105 x 20.5 mm

INCLUDED ACCESSORIES

- AC cord (2.0 m)　- Remote Control　- Batteries (AAA size) x 2

- Clamper x 3　- Operating instruction book

OPTIONAL ACCESSORIES

Pedestal Stand TY-ST43PE8

Cautions: This drawing is not a scale

Units : mm

947

6.3

927

CONNECTION TERMINAL

521

6.3

106

6.3

541

200

* Specifications and appearance are subject to change without notice.

+ 2 hidden pages