Panasonic SC-HC28 User Manual

P

Owner’s Manual

Compact Stereo System

Model No. SC-HC28

ESPAÑOL ENGLISH

Thank you for purchasing this product.
Please read these instructions carefully before using this product,

and save this manual for future use.

If you have any questions, contact: 1-800-211-PANA (7262)

Register online at www.panasonic.com/register

La referencia rápida en español se puede encontrar en la página 14.

(U.S. customers only)

RQT9729-P

IMPORTANT SAFETY INSTRUCTIONS

(Inside of product)

Read these operating instructions carefully before using the
unit. Follow the safety instructions on the unit and the
applicable safety instructions listed below. Keep these
operating instructions handy for future reference.

1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod,

bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from
tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing

is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

-If you see this symbol­Information on Disposal in other Countries

outside the European Union

This symbol is only valid in the
European Union.
If you wish to discard this
product, please contact your local
authorities or dealer and ask for
the correct method of disposal.

WARNING

Unit

≥ To reduce the risk of fire, electric shock or product damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases, on

this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

AC power supply cord

≥ The power plug is the disconnecting device.

Install this unit so that the power plug can be unplugged from
the socket outlet immediately.

Button-type battery (Lithium battery)

≥ Risk of fire, explosion and burns. Do not disassemble, heat

above 60 oC (140

This product contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death. Keep
new and used batteries away from children. If the battery
compartment does not close securely, stop using the
product and keep it away from children. If you think
batteries might have been swallowed or placed inside any
part of the body, seek immediate medical attention.

If any electrolyte should come into contact with your hands
or clothes, wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes,
never rub the eyes. Rinse eyes thoroughly with water, and
then consult a doctor.

<For USA-California only>
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material s special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate

o

F) or incinerate.

DO NOT INGEST BATTERY,
CHEMICAL BURN HAZARD

.

2

RQT9729

CAUTION

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.

CAUTION

CAUTION :

TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

RISK OF ELECTRIC SHOCK

DO

NOT OPEN

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein
may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted

candles, on this unit.

Placement

≥ To reduce the risk of fire, electric shock or product damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit is
well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

Button-type battery (Lithium battery)

≥ Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the
manufacturer.

≥ Keep out of reach of children.
≥ Insert with poles aligned.
≥ Mishandling of batteries can cause electrolyte leakage and

may cause a fire.
– Remove batteries if you do not intend to use the remote

control for a long period of time. Store in a cool, dark

place.
– Do not heat or expose to flame.
– Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and windows

closed.
– Do not touch the terminals (i and j) with metal objects.
– Do not recharge, disassemble, remodel, heat or throw into

fire.

≥ When disposing the batteries, please contact your local

authorities or dealer and ask for the correct method of
disposal.

Table of contents

IMPORTANT SAFETY INSTRUCTIONS............ 2

Accessories....................................................... 3

Control reference guide.................................... 4

Connections ......................................................5

Unit and media care .......................................... 5

Inserting media.................................................. 6

Media playback operations ..............................7

Listening to the radio........................................ 8

Sound adjustment............................................. 9

Clock and Timer ................................................9

Others............................................................... 10

Troubleshooting.............................................. 10

Specifications..................................................12

Licenses...........................................................12

Playable media ................................................ 13

Attaching the support pad to this unit ..........13

Spanish Quick Reference /

Referencia rápida en español ..................... 14

Limited Warranty (ONLY FOR U.S.A. AND

PUERTO RICO).............................................15

About descriptions in this Owner’s Manual

≥ Pages to be referred to are indicated as “l ±±”

Accessories

ENGLISH

Product Identification Marking is located on the bottom
of the unit.

Check the supplied accessories before using this
unit.

∏ 1 Remote control

(with a battery)

(N2QAYC000077)

∏ 1 FM indoor

antenna

(RSAX0002)

∏ 1 AC power supply

cord

(K2CB2CB00022)

∏ 1 Pad sheet (l 13)

(RFA3465)



≥ Do not use AC power supply cord with other equipment.
≥ Product numbers provided in this Owner’s Manual are

correct as of December 2012. These may be subject to
change.

3

RQT9729

Control reference guide

15

18

16 17

PUSH

12

11

10

9

8

7

6

5

4

3

2

1

2

3

8

14

13

1

Top view

Unless otherwise indicated, operations are
described using the remote control.

iPad

RADIO

VOLUME

OPEN

/

CLOSE

1 Standby/on switch [Í/I] (Í)

Press to switch the unit from on to standby mode or
vice versa.
In standby mode, the unit is still consuming a small
amount of power.

2 Select the audio source
3 Basic playback control buttons
4 Enter setup menu
5 Enter the iPod

Change displayed information

®

/iPhone® menu /

6 Set the sleep timer
7 Change the brightness of the display panel
8 Adjust the volume (0 (min) to 50 (max))
9 Mute the sound

Mutes the sound. Press again to cancel.
“MUTE” is also canceled when the volume is adjusted
or the unit is turned off.

10 Enter playback menu
11 Enter sound menu
12 Selection/OK
13 “IPOD_PORT” for iPod/iPhone/iPad

®

(l 6)

14 Open or close the sliding door
15 Sliding door
16 Display
17 Remote control signal sensor

Distance:
Within approx. 7 m (23 ft) directly in front.
≥ To avoid interference, please do not put any objects

in front of signal sensor.

18 “IPOD_DOCK” for iPod/iPhone/iPad mini

(l 6)

∫ Before using for the first time

Remove the insulation sheet A.



®

4

RQT9729

∫ To replace a button-type battery

Battery type: CR2025 (Lithium battery)



≥ Set the button-type battery with its (i) mark

facing upward.

≥ Keep the button-type battery out of reach of

children to prevent swallowing.

Connections

Adhesive tape
(not supplied)

FM indoor antenna
(supplied)

Connect the AC power supply cord after all other connections are completed.

To a household AC outlet

AC Power supply cord (supplied)

≥ In the interest of power conservation, if you will not be using this unit for an

extended period of time, unplug it from the household AC outlet.

This unit consumes a small amount of AC power (l 12) even when turned off.

Lens

1

2



≥ These speakers do not have magnetic shielding. Do not place them near a television, personal computer or other

devices easily influenced by magnetism.

≥ Tape the antenna to a wall or column in a position with the least amount of interference. (Use an FM outdoor antenna if

radio reception is poor.)

Unit and media care

Pull out the AC power plug from the outlet before
maintenance.

∫ Clean this unit with a soft, dry cloth

≥ When dirt is heavy, wring a cloth moistened in water

tightly to wipe the dirt, and then wipe it with a dry cloth.

≥ Never use alcohol, paint thinner or benzine to clean this

unit.

≥ Before using chemically treated cloth, carefully read the

instructions that came with the cloth.

∫ Maintenance of the lens

≥ Clean the lens regularly to prevent malfunctions. Use

a blower to remove dust and a cotton swab if it is
extremely dirty.

≥ You cannot use a CD type lens cleaner.
≥ Do not leave the sliding door open for prolonged

periods of time. This will cause the lens to get dirty.

≥ Be careful not to touch the lens with your fingers.

∫ Clean discs

DO DO NOT

Wipe with a damp cloth and then wipe dry.

∫ Disc handling precautions

≥ Handle discs by the edges to avoid inadvertent

scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner,

static electricity prevention liquids or any other solvent.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or

labels (rented discs etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.

∫ To dispose or transfer this unit

The unit may keep the user settings information in the unit.
If you discard this unit either by disposal or transfer, then
follow the procedure to return all the settings to the factory
presets to delete the user settings. (l 10, “To return all
settings to the factory preset”)

RQT9729

ENGLISH

5

Inserting media

PUSH

3

OPEN/CLOSE

4

Select “IPOD_DOCK” as the source

Connect using the Lightning connector *1

Select “IPOD_PORT” as the source

Connect using the dedicated
USB cable (not supplied) *1, 2

Select “CD” as the source

Attach the pad before using this unit. (l 13)

Pad
(supplied)

iPad

RADIO

VOLUME

OPEN

/

CLOSE

*1: Refer to “Playable media” for compatible models.

(l 13)

– Do not connect an iPad (4th generation) to the

“IPOD_DOCK” connection. This unit might fall over.
Use the “IPOD_PORT” connection.

*2: When using the “IPOD_PORT” connection, do not

connect the following models to this unit:
– iPod classic

5th (video) generation]

RQT9729

Unexpected behavior may occur.

*3: When using the “IPOD_DOCK” connection:

≥ Be sure to remove the iPod/iPhone/iPad mini from its

case.

≥ Make sure that the iPod/iPhone/iPad mini is fully

inserted.

≥ If the iPod/iPhone/iPad mini is pushed to the left or

right, make sure to check that it is still fully inserted.

≥ Make sure to hold the dock when removing the

iPod/iPhone/iPad mini.

≥ Make sure to close the dock properly after using it.

If not,
– The sliding door will not open.
– The standby power consumption will increase.

*4: Make sure to tilt the disc so as not to touch the sliding

6

door.

®

, iPod [4th (color display), and

≥ Do not open the sliding door manually.
≥ Make sure that the unit does not fall when inserting or

removing media.

≥ When moving this unit, be sure to remove all media and

turn this unit to standby mode.

Charging an iPod/iPhone/iPad

Charging starts when an iPod*2/iPhone/iPad is
connected to this unit.

≥ During standby mode, charging will not start from the

“IPOD_PORT” connection, however it will start as usual
from the “IPOD_DOCK” connection.

– To charge from the “IPOD_PORT” connection, start

the charging before turning this unit to standby mode.



≥ Check the iPod/iPhone/iPad to see if the battery is fully

charged. (Once fully recharged, additional recharging
will not occur.)

≥ If this unit is switched to standby mode

“IPOD CHARGING” is shown on the unit’s display.

Media playback operations

The following marks indicate the availability of the
feature.

[CD] : CD audio in CD-DA format
[iPod] : Compatible iPod/iPhone/iPad (l 13)

Preparation

≥ Turn the unit on.
≥ Insert the media. (l 6)
≥ Press [CD] or [iPod] to select the audio source.

Basic play ([CD], [iPod])

Play Press [1/;].

Stop Press [∫].

Pause Press [1/;].

Skip Press [:/6] or [5/9]

Search During play or pause

[CD] To display information

Press [DISPLAY] repeatedly.

[iPod] To navigate through the iPod/iPhone
menu

≥ Open the Music App to use this feature with iPod touch®/

iPhone.

–[3, 4]: To navigate menu items.
– [OK]: To go to the next menu.
– [iPod MENU]: To return to the previous menu.

Press again to restart play.

to skip track.

Press and hold [:/6] or
[5/9].

≥ [iPod] : Backwards search is only

within the current track.



≥ The operation may vary among iPod/iPhone/iPad

models.

≥ Depending on the model (e.g., iPod nano

generation, etc.) it may be necessary to select the
album, artist, etc. on the iPod/iPhone/iPad.

®

7th

Select the playback mode.

1 Press [PLAY MENU] to select “PLAYMODE” or

2 Press [3, 4] to select the setting and then

PLAYMODE

REPEAT



≥ When using iPod/iPhone/iPad, use the setting on the

≥ During random play, you cannot skip to the previous

≥ The mode is canceled when you open the sliding door.

Playback modes ([CD])

“REPEAT”.

press [OK].

OFF
PLAYMODE

1-TRACK Only plays the selected track.

RANDOM Plays the contents randomly.

ON REPEAT Turn on repeat mode.

OFF REPEAT Turn off repeat mode.

iPod/iPhone/iPad.

track.

Select to cancel the play mode
setting.

≥ “1, ” is displayed.

(Skip to the desired track)

≥ “RND” is displayed.

≥ “`” is displayed.

ENGLISH

7

RQT9729

Listening to the radio

You can preset up to 30 channels.

Preparation

≥ Make sure that the FM antenna is connected.

(l 5)

≥ Turn the unit on.
≥ Press [RADIO] to select “FM”.



A station previously stored is overwritten when another
station is stored in the same channel preset.

Presetting stations automatically

1 Press [PLAY MENU] to select “A.PRESET”.
2 Press [3, 4] to select “LOWEST” or

“CURRENT” and then press [OK].

LOWEST:

To begin auto preset with the lowest frequency
(FM 87.9 or FM 87.5).

CURRENT:

To begin auto preset with the current
frequency.*

* To change the frequency, refer to “Manual tuning and

presetting”.

The tuner starts to preset all the stations it can
receive into the channels in ascending order.

Listening to a preset channel

Preparation

1 Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

2 Press [3, 4] to select “PRESET” and then

press [OK].

Press [:/6] or [5/9] to select the
channel.

∫ Manual tuning and presetting

Select a radio broadcast.

1 Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

2 Press [3, 4] to select “MANUAL” and then

press [OK].

3 Press [:/6] or [5/9] to tune to the

required station.

≥ To start automatic tuning, press and hold

[:/6], [5/9] until the frequency starts
scrolling. Tuning stops when a station is found.

To preset the channel

4 While listening to the radio broadcast

Press [OK].

5 Press [3, 4] to select the channel and then

press [OK].

∫ To improve FM sound quality

1 While receiving FM broadcasts, press

[PLAY MENU] repeatedly to select
“FM MODE”.

2 Press [3, 4] to select “MONO” and then press

[OK].

≥ This setting can be preset and memorized. To do

so, continue to step 4 of “Manual tuning and
presetting”.



≥ Select “STEREO” in step 2 to return to stereo

broadcasts.

≥ “MONO” is canceled if the frequency is changed.
≥ If “MONO” is selected, regardless of the type of signal

this unit is receiving, “FM MONO” is displayed when
[DISPLAY] is pressed. (l below)

∫ To display the current signal status

Press [DISPLAY].

“FM ST”: The FM signal is in stereo.
“FM”: The FM signal is in monaural.
≥ “FM” is also displayed even if this unit is not

tuned to a station.

8

RQT9729



≥ “STEREO” is displayed when this unit tunes to a stereo

broadcast.

Sound adjustment

The following sound effects can be added to the
audio output.

1 Press [SOUND] repeatedly to select the effect.
2 Press [3, 4] to select the setting and then

press [OK].

Preset EQ
(PRESET EQ)

Bass (BASS) or
Treble (TREBLE)

Dynamic Bass
(D.BASS)

Surround
(SURROUND)

≥ You may experience a reduction in sound quality when

these effects are used with some sources. If this occurs,
turn the sound effects off.

“HEAVY” (heavy), “SOFT”
(soft), “CLEAR” (clear),
“VOCAL” (vocal) or “FLAT”
(flat/off).

≥ The factory preset is “HEAVY”.

Adjust the level (j4 to i4).

“ON D.BASS” or
“OFF D.BASS”.

≥ The factory preset is

“ON D.BASS”.

“ON SURROUND” or “OFF
SURROUND”.

≥ The factory preset is

“OFF SURROUND”.

Play timer

You can set the timer so this unit turns on at a
certain time every day.

Preparation

Set the clock (l left).

∫ Setting the timer

1 Press [SETUP] repeatedly to select

“TIMER ADJ”.

2 Press [3, 4] to set the starting time

(“ON TIME”) and then press [OK].

3 Press [3, 4] to set the finishing time

(“OFF TIME”) and then press [OK].

∫ Turn the timer on

1 Select the music source*

volume.

1

and set the desired

2 Press [SETUP] repeatedly to select

“TIMER SET”.

3 Press [3, 4] to select “SET” and then press

[OK].

≥ “F” is displayed.

≥ To turn the timer off, select “OFF”.

4 Press [Í] to turn the unit off.

ENGLISH

Clock and Timer

Setting the clock

This is a 12-hour clock.

1 Press [SETUP] to select “CLOCK”.
2 Press [3, 4] to set the time and then press

[OK].



≥ To display the clock, press [SETUP] to select “CLOCK”

and then press [OK] once. The time is displayed for 10
seconds.

(During standby, press [DISPLAY] once.)

≥ The clock is reset when there is a power failure or when

the AC power supply cord is removed.

≥ Reset the clock regularly to maintain accuracy.

*1: “CD”, “IPOD_DOCK”, “IPOD_PORT” and “FM” can be

set as the music source.



≥ To display the timer settings, press [SETUP] repeatedly

to select “TIMER ADJ” and then press [OK] once.
The music source and volume will also be displayed if
the timer is turned on.

≥ During standby, if the timer is turned on, press

[DISPLAY] twice to display the settings.

≥ This unit can be used as normal after the timer is set,

however:
– Turn the unit to standby mode before the timer start

time.
– Even if the audio source or the volume is changed, the

timer will still use the audio source and volume that

was set when the timer was turned on.

Sleep timer

The sleep timer can turn the unit off after a set time.

Press [SLEEP] repeatedly to select the time.

“SLEEP 30” -. “SLEEP 60” -. “SLEEP 90” -. “SLEEP 120”

^------------------------ OFF (Cancel) (-----------------------b

≥ The remaining time is indicated on the unit’s display

except when other operations are performed.

≥ The play timer and sleep timer can be used together.

The sleep timer always has priority.

RQT9729

9

Others

Automatic standby

As a factory preset, this unit will always turn off
automatically if there is no sound output and no
operation for approx. 30 minutes.

To cancel this function

1 Press [SETUP] repeatedly to select

“AUTO OFF”.

2 Press [3, 4] to select “OFF” and then press

[OK].



≥ To turn automatic standby on, select “ON” in step 2.
≥ This setting cannot be selected when “FM” is the source.

Display brightness

The brightness of this unit’s display can be
changed.

Press [DIMMER].

Changing the unit and remote
control code

When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.

1 Press [CD] to select “CD”.
2 Press and hold [CD] on the unit and [CD] on the

remote control until the unit’s display shows
“REMOTE 2”.

3 Press and hold [OK] and [CD] on the remote

control for at least 4 seconds.



≥ To change the mode back to “REMOTE 1”, repeat the

steps above but replace the button pressed on the
remote control from [CD] to [RADIO].

Troubleshooting

Before requesting service, make the following
checks. If you are in doubt about some of the check
points, or if the solutions indicated in the following
guide do not solve the problem, refer to “Customer
Services Directory (United States and Puerto Rico)”
on page 15.

To return all settings to the factory preset

When the following situations occur, reset the

memory:

≥ There is no response when buttons are pressed.

≥ You want to clear and reset the memory contents.

1 Disconnect the AC power supply cord. (Wait

for at least 3 minutes before proceeding to
step 2.)

2 While pressing and holding down [Í/I] on the

unit, reconnect the AC power supply cord.
≥ “--------” appears on the display.

3 Release [Í/I].



All the settings are returned to the factory preset. You will

need to reset the memory items.

Common problems

Humming heard during play.

≥ An AC power supply cord or fluorescent light is near the

cords. Keep other appliances and cords away from this
unit’s cables.

Disc operations

Incorrect display or play will not start.

≥ Make sure that the disc is compatible with this unit.

(l 13)

≥ There is moisture on the lens. Wait for about an hour

and then try again.

Radio

A beat sound or noise is heard while receiving
radio broadcast.

≥ Confirm the FM antenna is properly connected. (l 5)
≥ Adjust the position of the antenna.
≥ Try to keep a certain amount of distance between the

antenna and AC power supply cord.

≥ Try using an outdoor antenna if there are buildings or

mountains nearby.

≥ Switch the television or other audio players off or

separate it from this unit.

≥ Keep this unit away from mobile phones if the

interference is apparent.

10

RQT9729

Stations cannot be selected.

Change the FM frequency step.

1 Press [RADIO] to select “FM”.
2 Press and hold [RADIO] on the unit.

After a few seconds the display changes to show the
current lowest frequency. Continue to hold the button
down. The lowest frequency changes and the step is
changed.

iPod/iPhone/iPad operations

“DIMMER”

≥ Appears 10 seconds after the volume is turned to “0”.

“DOCK OPEN”

≥ Is the dock open? Close the dock completely to open the

sliding door.

“ERROR”

≥ Incorrect operation is performed. Read the instructions and

try again.

Cannot charge or operate.

≥ Have you selected the appropriate selector?

Press [iPod] to select either “IPOD_DOCK” or
“IPOD_PORT”.

≥ Check that the iPod/iPhone/iPad is connected properly.

(l 6)

≥ The battery of the iPod/iPhone/iPad is depleted. Charge

the iPod/iPhone/iPad, and then operate again.

≥ Connect the iPod/iPhone/iPad again or try to restart the

iPod/iPhone/iPad.

≥ When this unit is in standby mode, charging will not start

when using the “IPOD_PORT” connection.
Turn this unit on and make sure the charging has started
before switching this unit to standby mode.

Remote control

The remote control doesn't work properly.

≥ The remote control and this unit are using a different

code. (l right, “REMOTE ”)

≥ Is the battery depleted or is the battery inserted

incorrectly? (l 4)

Messages

The following messages or service numbers
may appear on the unit's display.

“--:--”

≥ You plugged the AC power supply cord in for the first time or

there was a power failure recently. Set the time (l 9).

“ADJUST CLOCK”

≥ Clock is not set. Adjust the clock accordingly.

“F ” (“  ” stands for a number.)

≥ There is a problem with this unit.

Note down the displayed number, disconnect the AC power
supply cord and consult your dealer.

“ILLEGAL OPEN”

≥ Sliding door is not in correct position. Turn the unit off and on

again. If this display appears again, consult the dealer.

“IPOD_DOCK OVER CURRENT ERROR”
“IPOD_PORT OVER CURRENT ERROR”

≥ The iPod/iPhone/iPad is drawing too much power.

Disconnect the iPod/iPhone/iPad and turn the unit off and on
again.

“NODEVICE”

≥ The iPod/iPhone/iPad device is not inserted correctly. Read

the instructions and try again (l 6).

≥ The battery of the iPod/iPhone/iPad is depleted. Charge the

iPod/iPhone/iPad and turn it on before connecting.

“NO DISC”

≥ Insert a disc to be played (l 6).

“NO PLAY”

≥ A CD that is not in CD-DA format is inserted. It cannot be

played.

“NOT SUPPORTED”

≥ You have connected an iPod/iPhone/iPad that cannot be

played (l 13).

≥ If the iPod/iPhone/iPad is compatible, turn it on and connect

it correctly.

ENGLISH

“ADJUST TIMER”

≥ Play timer is not set. Adjust the play timer accordingly.

“AUTO OFF”

≥ The unit has been left unused for about 30 minutes and will

shut down within a minute. Press any button to cancel it.

“CHECKING CONNECTION”

≥ The unit is checking the connected iPod/iPhone/iPad.
≥ If this display keeps appearing, make sure that the battery of

the iPod/iPhone/iPad is not depleted and that the iPod/
iPhone/iPad is turned on and connected correctly (l 6).

“READING”

≥ The unit is checking the CD information. After this display

has disappeared, start operating.

“REMOTE ” (“  ” stands for a number.)

≥ The remote control and this unit are using different codes.

Change the code on the remote control.
– When “REMOTE 1” is displayed, press and hold [OK] and

[RADIO] for more than 4 seconds.
– When “REMOTE 2” is displayed, press and hold [OK] and

[CD] for more than 4 seconds.

11

RQT9729

Specifications

∫ GENERAL

Power consumption 40 W
Power consumption in standby mode*

Power consumption in standby mode
(With the iPod dock open)

Power supply AC 120 V, 60 Hz

Dimensions (WkHkD)

400 mmk213 mmk110 m m

(15

3

(Min. Depth: 72 mm (2

(Depth when tray open: 134 mm (5

Mass (Weight)

Approx. 2 kg (4.4 lbs)

Operating temperature range

0 oCtor40 oC(r32

Operating humidity range

35 % to 80 % RH (no condensation)

1

Approx. 0.1 W

Approx. 0.3 W

/4qk83/8qk411/32q)

o

27

/32q))

9

/32q))

F to r104oF)

∫ AMPLIFIER SECTION

Output power:
RMS Output Power Stereo mode

Front Ch (both ch driven)

5 W per channel (6 ≠), 1 kHz, 10 % THD

Total RMS Stereo mode power

10 W

FTC Output Power Stereo mode

Front Ch (both ch driven)

3.5 W per channel (6 ≠),

60 Hz to 20 kHz, 1 % THD

Total FTC Stereo mode power

7W

∫ TUNER SECTION

Preset Memory FM 30 stations
Frequency Modulation (FM)

Frequency range

87.9 MHz to 107.9 MHz (200 kHz step)

87.5 MHz to 108.0 MHz (100 kHz step)

Antenna terminals

75 ≠ (unbalanced)

∫ DISC SECTION

Disc played [8 cm (3q) or 12 cm (5q)]

CD, CD-R/RW (CD-DA)

Pick up

Wavelength 790 nm (CD)

Audio output (Disc)

Number of channels 2 ch (FL, FR)

∫ SPEAKER SYSTEM SECTION

Typ e

1 way, 1 speaker system (Bass reflex)

Speaker unit(s)

Full range

8cm(3

1

/8q) Cone typek1 per channel

Impedance 6 ≠

∫ TERMINAL SECTION

“IPOD_DOCK” connection

“IPOD_PORT” connection

DCOUT 5V, 2.1A MAX

DCOUT 5V, 2.1A MAX



≥ Specifications are subject to change without notice.

Mass and dimensions are approximate.

≥ Total harmonic distortion is measured by a digital

spectrum analyzer.

*1: When the iPod/iPhone/iPad is not charging and the

dock is closed.

Licenses

“Made for iPod”, “Made for iPhone”, and “Made for
iPad” mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone, or
iPad, respectively, and has been certified by the
developer to meet Apple performance standards.

Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.

Please note that the use of this accessory with iPod,
iPhone, or iPad may affect wireless performance.

iPad, iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in the
U.S. and other countries.

12

RQT9729

Playable media







PUSH



e.g., iPhone 5

Compatible iPod/iPhone/iPad

Compatible with “IPOD_DOCK” connection

(Using Lightning connector)

iPod touch® (5th generation)
iPod nano® (7th generation)
iPhone® 5

®

mini

iPad

Compatible with “IPOD_PORT” connection

[Using dedicated USB cable (not supplied)]

iPod touch

1st, 2nd, 3rd, 4th, and 5th generation

iPod nano

2nd, 3rd, 4th, 5th, 6th, and 7th generation

iPhone® 5 / iPhone® 4S / iPhone® 4 /
iPhone

iPad® (3rd, and 4th generation) / iPad® 2 / iPad
iPad® mini



≥ Compatibility depends on the software version. Update

your iPod/iPhone/iPad to the latest software before
using it with this unit.

≥ Please be aware that Panasonic accepts no

responsibility for the loss of data and/or information.

≥ A disc with the CD Logo.

®

®

®

3GS / iPhone® 3G / iPhone

Compatible CD

®

®

(as of December 2012)

Attaching the support
pad to this unit

Attach the supplied support pad to prevent damage
or scratches to this unit’s sliding door or the device
connected to the “IPOD_DOCK”.
Attach the support pad before using this unit.
≥ The location is the same for either iPod touch,

iPod nano, iPhone or iPad mini.

1 Align this page to the sliding door and locate

the position to attach the pad.

A Align with the top of the sliding door.

B Align with the side of the sliding door.

C Pad (supplied)

2 Attach the pad near the corner of this page.

ENGLISH

A

≥ This unit can play back discs that conform to the CD-DA

format.

≥ The unit may not be able to play some discs due to the

condition of the recording.

≥ This unit cannot play back MP3 files.

Note about using a DualDisc

≥ The digital audio content side of a DualDisc does not

meet the technical specifications of the Compact Disc
Digital Audio (CD-DA) format so play may not be
possible.

≥ Do not use a DualDisc in this unit as it may not be

possible to insert it correctly and it may get scratched or
scraped.

D There will be a gap between this unit’s

sliding door and the connected device.



≥ 2 pads are supplied with this unit.

Keep the other pad in a secure place for future use.

B

13

RQT9729

Spanish Quick Reference / Referencia rápida en

1

2

Cinta adhesiva
(no suministrado)

Antena interior
FM
(suministrado)

Conecte el cable de
alimentación AC después de
que todas las demás
conexiones estén completas.

Hacia el tomacorriente AC

Cable de alimentación AC (suministrado)

OPEN/CLOSE

español

Conexiones

≥ Consumo de energía en Standby

(modo de espera): Aprox. 0,1 W

Operaciones de
reproducción de
medios

Preparación

≥ Encienda la unidad.
≥ Inserte el medio. (l arriba)
≥ Presione [CD] o [iPod] para seleccionar la fuente de

audio.

Reproducción básica

Insertar o sacar los
medios

iPad

/

CLOSE

OPEN

VOLUME

Reloj y temporizador

Ajuste del reloj

Éste es un reloj de 12 horas.

1 Presione [SETUP] para seleccionar “CLOCK”.
2 Presione [3, 4] para seleccionar la hora y

luego presione [OK].

Reproducir Presione [1/;].
Detención Presione [∫].
Pausa Presione [1/;].

Saltear Presione [:/6] o [5/9] para

Búsqueda Durante la reproducir o pausa

14

RQT9729

Presione nuevamente para reiniciar la
reproducción.

saltear una pista.

Mantenga presionado [:/6] o
[5/9].

Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)

Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Products Limited Warranty

Limited Warranty Coverage
(For USA and Puerto Rico Only)

If your product does not work properly because of a defect in materials or
workmanship, Panasonic Consumer Marketing Company of North America
(referred to as “the warrantor”) will, for the length of the period indicated on
the chart below, which starts with the date of original purchase (“warranty
period”), at its option either (a) repair your product with new or refurbished
parts, (b) replace it with a new or a refurbished equivalent value product, or (c)
refund your purchase price. The decision to repair, replace or refund will be
made by the warrantor.

Product or Part Name Parts Labor

Compact Stereo System 1 Year 1 Year

All included Accessories
(Except Non-Rechargeable Batteries)

Only Non-Rechargeable Batteries 10 Days Not Applicable

During the “Labor” warranty period there will be no charge for labor. During
the “Parts” warranty period, there will be no charge for parts. This Limited
Warranty excludes both parts and labor for non-rechargeable batteries,
antennas, and cosmetic parts (cabinet). This warranty only applies to products
purchased and serviced in the United States or Puerto Rico. This warranty is
extended only to the original purchaser of a new product which was not sold
“as is”.

Mail-In Service

For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship
the product prepaid to:

Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
[e-mail]

Online Repair Request

To submit a new repair request and for quick repair status visit our Web Site at
www.panasonic.com/repair

When shipping the unit, carefully pack, include all supplied accessories listed
in the Owner’s Manual, and send it prepaid, adequately insured and packed
well in a carton box. When shipping Lithium Ion batteries please visit our Web
Site at www.panasonic.com/BatteryHandling
providing the most up to date information. Include a letter detailing the
complaint, a return address and provide a daytime phone number where you
can be reached. A valid registered receipt is required under the Limited
Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT
PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED
FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF
OF PURCHASE.

Limited Warranty Limits And Exclusions

This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT COVER damages which occurred
in shipment, or failures which are caused by products not supplied by the
warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation,

The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.

.

MODEL NUMBER
SERIAL NUMBER

90 Days Not Applicable

as Panasonic is committed to

SC-HC28

set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction
of sand, humidity or liquids, commercial use such as hotel, office, restaurant,
or other business or rental use of the product, or service by anyone other than
a Factory Service Center or other Authorized Servicer, or damage that is
attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.

(As examples, this excludes damages for lost time, travel to and from the
servicer, loss of or damage to media or images, data or other memory or
recorded content. The items listed are not exclusive, but for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD
OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts,
so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. If a problem with this product develops
during or after the warranty period, you may contact your dealer or Service
Center. If the problem is not handled to your satisfaction, then write to the
warrantor’s Consumer Affairs Department at the addresses listed for the
warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.

Customer Services Directory (United States and Puerto Rico)

Obtain Product Information and Operating Assistance; locate your
nearest Dealer or Service Center; purchase Parts and
Accessories; or make Customer Service and Literature requests
by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo

You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm EST

For hearing or speech impaired TTY users, TTY: 1-877-833-8855

Accessory Purchases (United States and Puerto Rico)

Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
[e-mail]
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)

For hearing or speech impaired TTY users, TTY: 1-866-605-1277

User memo:

DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS

TELEPHONE NUMBER

ENGLISHESPAÑOL

As of October 2012

15

RQT9729

FCC Note:

pr

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094

Support Contact:
Panasonic Consumer Marketing Company of
North America
Telephone No.: 1-800-211-PANA (7262)

Panasonic Consumer Marketing
Company of North America,
Division of Panasonic Corporation of
North America

One Panasonic Way, Secaucus,
New Jersey 07094

http://www.panasonic.com

C Panasonic Corporation 2012
Printed in Malaysia

RQT9729-P

F1212KW0