Panasonic SC-ALL6, SC-ALL9 User Manual

Panasonic SC-ALL6, SC-ALL9 User Manual

Wireless Speaker System

Model No. SC-ALL9

SC-ALL6

Wi-Fi® QUICK SETUP GUIDE

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

SQC0359

F0116BL1016

This guide describes how to connect this system to a network while starting up and operating the Panasonic Music Streaming app.

The operations and on-screen display items, etc. of the app “Panasonic Music Streaming” are subject to change. For the latest information, visit

http://panasonic.jp/support/global/cs/audio/app/ (This site is in English only.)

The Wi-Fi CERTIFIEDTM Logo is a certification mark of Wi-Fi Alliance®.

The Wi-Fi Protected SetupTM Identifier mark is a certification mark of Wi-Fi Alliance®. “Wi-Fi®” is a registered trademark of Wi-Fi Alliance®.

“Wi-Fi Protected SetupTM”, “WPATM”, and “WPA2TM” are trademarks of Wi-Fi Alliance®. Google Play and Android are trademarks of Google Inc.

App Store is a service mark of Apple Inc.

All other trademarks are trademarks of their respective owners.

1 Download

the app

Download the free “Panasonic Music Streaming” app from the store on your smartphone/ tablet.

[iOS] : App Store

[Android] : Google PlayTM

2

Select ALL9 or ALL6.

Open the app and follow the on-screen instructions

Connect.

 

Turn on the unit.

Enter the password for

[SC-ALL9]

[SC-ALL6]

Wait until the network

the wireless network

 

 

indicator stops blinking in

that you want to add.

 

 

blue and red, and starts

 

 

 

 

 

blinking in blue.

 

NOTE:

Do not connect the LAN cable.

[SC-ALL9] [SC-ALL6]

[SC-ALL9] [SC-ALL6]

The blinking in blue starts after approximately 60 seconds. If the blinking in blue does not start, restore the factory defaults. (see Operating instructions)

[iOS] :

Before following the step above, follow the steps below.

1.Go to wireless settings on your smartphone or tablet.

2.Select

“AllPlay _AJ”.* 3.Type a device name, select your network name (SSID) and type the password.

*This can sometimes take 1 minute to appear.

3 After a short wait ...you’re connected!

The network indicator lights up in blue.

[SC-ALL9] [SC-ALL6]

In case you are not connected automatically,

please re-select your Wi-Fi network from the settings / Wi-Fi settings menu on your device.

Loading...