As an ENERGY STAR® Partner, Panasonic has determined
that this product meets the ENERGY STAR® guidelines for
energy efficiency.
SC-AK410
SC-AK403
PPC
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
SC-AK610 and SC-AK403 are available in the U.S.A. only.
RQT6707-3P
Table of contents
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These operating instructions are applicable to the following systems.
Unless otherwise indicated, illustrations in these operating instructions
are of SC-AK510.
SystemSC-AK610 SC-AK510 SC-AK410 SC-AK403
Main unitSA-AK610SA-AK510 SA-AK410 SA-AK403
Front speakers SB-AK610 SB-AK510 SB-AK410 SB-AK410
SubwooferSB-WAK610–––
Before using
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PRODUCT DAMAGE, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED
ON THE APPARATUS.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
IMPORTANT SAFETY INSTRUCTIONS............................. 3
Limited Warranty (ONLY FOR U.S.A.) ............. Back cover
Customer Services Directory
(ONLY FOR U.S.A.)......................................... Back cover
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
2
RQT6707
TELEPHONE NUMBER
Except for U.S.A.
Inside of product
For SC-AK410 sold in Canada
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Listening caution
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion—and, most importantly, without affecting your sensitive
hearing.
We recommend you to avoid prolonged exposure to excessive noise.
Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal” can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE
your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
•
Slowly increase the sound until you can hear it comfortably and
•
clearly, and without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there.
•
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused
for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.:
CAUTION:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and re-
•
ceiver.
Connect the equipment into an outlet on a circuit different
•
from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician
•
for help.
Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Before using
Product Service
1. Damage requiring service —The unit should be serviced by
qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged; or
(b)Objects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked change
in performance; or
(e)The unit has been dropped or the cabinet damaged.
2. Servicing —Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing
to authorized servicing personnel.
3. Replacement parts —When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check —After repairs or service, ask the servicer to
perform safety checks to confirm that the unit is in proper working
condition.
Product information
For product information or assistance with product operation:
In the U.S.A., contact the Panasonic Customer Call Center at
1-800-211-7262, or e-mail consumerproducts@panasonic.com,
or web site (http://www.panasonic.com).
In Canada, contact Panasonic Canada Inc. Customer Care Centre
at 905-624-5505, web site (www.panasonic.ca), or an authorized
Servicentre closest to you.
3
RQT6707
Supplied accessories
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking
for replacement parts.
(Only for U.S.A.)
To order accessories contact 1-800-332-5368 or
web site (http://www.panasonic.com).
AC power supply cord . . 1 pc.
(RJA0065-1D)
The remote control
Batteries
R6, AA, UM-3
FM indoor antenna .. 1pc.
(RSA0006-J)
Remote control
Before using
transmitter .....................1 pc.
SC-AK610
(N2QAHB000036)
SC-AK410
For U.S.A.:
• Black: (EUR7710010)
• Silver: (EUR7710020)
For Canada:
(EUR7710020)
SC-AK403
(EUR7710010)
SC-AK510
AM loop antenna . . 1 pc.
(N1DADYY00002)
Batteries ............. 2 pcs.
R6, AA, UM-3
Placement of speakers
SC-AK610 SC-AK510
Place the front speakers so that the tweeter is on the outside.
SC-AK410
Place the front speakers so that the super tweeter is on the outside.
Tweeter
SC-AK403
Super tweeterSuper tweeter
Tweeter
Insert so the poles (+ and –) match those in the remote control.
•
Do not use rechargeable type batteries.
•
Do not:
mix old and new batteries.
•
use different types at the same time.
•
heat or expose to flame.
•
take apart or short-circuit.
•
attempt to recharge alkaline or manganese batteries.
•
use batteries if the covering has been peeled off.
•
keep together with metallic objects such as necklaces.
•
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even
when held close to the front panel.
Use
4
RQT6707
(SB-AK610/
SB-AK510)
Front speaker
(left)
(SB-WAK610)
Note
(SB-AK410)
only
SC-AK610
Subwoofer
Place on the floor or a sturdy shelf so that it won’t
cause vibration.
If irregular coloring occurs on your television
The subwoofer is designed to be used close to a
television, but the picture may be affected with
some televisions and set-up combinations.
If this occurs, turn the television off for about
30 minutes.
The television’s demagnetizing function should
correct the problem. If it persists, move the
speaker further away from the television.
(SB-AK410)
Main unit
• Keep your speakers at least 10 mm (
for proper ventilation.
13
/32˝) away from the system
(SB-AK610/
SB-AK510)
Front speaker
(right)
• The front speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
• You cannot take the front net off the speakers.
1
2
5
3
Remote control
signal sensor
30
Transmission
window
Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.
Keep the transmission window and the unit’s sensor free from dust.
•
Operation can be affected by strong light sources, such as direct
•
sunlight, and the glass doors on cabinets.
˚
4
30
˚
About 7 meters in front of
the signal sensor
Do not:
put heavy objects on the remote control.
•
take the remote control apart.
•
spill liquids onto the remote control.
•
Set-up
Connect the AC power supply cord only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
2
AM loop antenna
Stand the antenna up
on its base.
The illustration shows SC-AK510.
(L)
4
AC power supply cord
Note
The included AC power supply cord
is for use with this unit only.
Do not use it with other equipment.
For your reference
Information you enter into the unit’s
memory, except for time, remains
intact for up to a week after the AC
power supply cord is disconnected.
3 Speaker cords
SC-AK610 SC-AK510
Gray
Blue
(R)
Red
Connect the left (L) side
in the same way.
1
FM indoor antenna
Adhesive tape
Affix where
reception is best.
Before using
SC-AK410
Gray
3
SC-AK403
Blue
1
Black
Black
2
Gray (+)
3
1
R
Black (–)
Connect the left (L) side
in the same way.
Red
-
L
Red (+)
Black (–)
Blue (–)
Red (+)
Blue (+)
Gray
(+)
SC-AK610
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound.
Using other speakers can damage the unit and sound quality will be
negatively affected.
only
SUB–
WOOFER
Caution
Use the speakers only with the recommended
•
system. Failure to do so may lead to damage
to the amplifier and/or the speakers, and may
result in the risk of fire. Consult a qualified
service person if damage has occurred or if
you experience a sudden change in
performance.
Do not attach these speakers to walls or
•
ceilings.
Subwoofer
(SB-WAK610)
5
RQT6707
Front panel controls
VOL
VOL
SHI
CLOCK
TIMER
REC
O OFF
INTRO
UND EQ
T EQ
ING
ENTER
MARKER
TITLE
SEARCH
PROG
AM
REP
AT
AY MODE
DISC
SPACE
ABC
DEF
GHI
TUV
WXY
PQRS
JKL
MNO
EEP
CD DISP
DIMMER
BUM
CURSOR
DEL
TAPE
CD
AUX
LEAR
TUNER
ND
S.WOOFER
Main unit
Before using
Remote control
(For SC-AK410
and SC-AK403)
(For SC-AK610
6
RQT6707
and SC-AK510)
REC
DECK 1/2
TUNER /
REWFF
BAND
DISP/
DEMO
AUX
DECK 1
AUTO OFF
DISC
PROG
RAM
PL AY MODE
REP
EAT
TUNER
BAND
VOL
ALBUM
INTRO
SHI
FT
S.S.SOSOUND EQ
SLEEP
GHI
DEL
MARKER
S.WOOFER
CD
STOP
TAP E
DECK 2
/
PLPLAY
CLOCK
/
REC
TIMER
CD DISP
DIMMER
DEF
ABC
2
1
4
JKL
5
TUV
3
MNO
6
WXY
ZPQRS
789
SPACE
10
0
CD
TAPE
CLEAR
AUX
VOL
CURSOR
REWFF
TITLE
ENTER
SEARCH
PRERESET EQ
MUTUTING
1 AC supply indicator (AC IN)
This indicator lights when the unit is connected to the AC power
supply.
2 Standby/on switch (
Press to switch the unit from on to standby mode or vice versa. In
ff
f/I, POWER)
ff
standby mode, the unit is still consuming a small amount of power.
3 Display
4 Remote control signal sensor............................................... 4
5 Super sound EQ button (SUPER SOUND EQ) ................... 14