The illustrations show SC-AK340.
Operating Instructions
CD Stereo System
ModelNo.SC-AK340
SC-AK240
Table of contents
Caution for AC Mains Lead ..................... 2
Placement of speakers ............................ 3
Getting started ......................................... 4
Overview of controls ............................... 6
Discs ......................................................... 7
Cassette tape - Play and record .......... 11
Radio ....................................................... 13
Timer ....................................................... 14
Sound adjustment ................................. 15
E×ternal unit ........................................... 16
Maintenance ........................................... 16
When moving the unit ........................... 16
Troubleshooting guide .......................... 17
Safety precautions ................................ 18
Specifications ........................................ 19
Before connecting, operating or adjusting this product,
please read these instructions completely.
Please keep this manual for future reference.
Note:
"EB" onthe packaging indicates the United Kingdom.
_ .....
Please check and identify the supplied accessories.
....
Use numbers indicated in parentheses when asking for
replacement parts. (As of November 2005)
(K2CT3CA00004)
(K2CJ2DA00008)
(N2QAHB000065)
(K2CQ2CA00002)
(RSA0007-L)
(KI YZ02000013)
(RSA0006-L)
(N1 DAAAA00001)
[_ [_ _ [_ RQTV0066-1B
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
These operating instructions are applicable to the following
systems.
| : indicates features applicable to SC-AK340 only.
: SC-AK240 only.
System SC-AK340 SC-AK240
Main unit SA-AK340 SA-AK240
Speakers SB-AK340 SB-AK240
(For United Kingdom)
("EB" area code model only)
For your safety,please readthefollowingtext carefully,
This appliance is suppliedwith a mouldedthree pin mains plugfor your
safetyand convenience.
A5-amperefuse isfitted in this plug.
Shouldthe fuse need to be replacedpleaseensure thatthe replacement
fuse hasa rating of 5-ampere and that it is approvedby ASTAor BSlto
BSI362.
Checkfor the ASTAmark_ orthe BSl mark _ on thebody ofthe fuse.
(Back of product)
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
F---
CAUT_O N - C£_,SS1'1IN_'lSl?__ [/_SERR_)IA ION t/_Eli OP
VARNING - KL_SS _'IOSYNLIGAS _SR_Lrilt_G '_R D_'/t4A_EL _ROPP AD
FORSJGTIG- S/'NLIG LASERSq&LING_(_ !N' N_RLt'G£1ER _E'?
VARO ! -N#_AESS_IO_ALT]IINALLO<A!H!a_d_'tvt¢_C_IASERS_IiY_
VORSICHT - UNSIO_£ARE AS £SIRAH UNGKIASS 1_'/IEN'_/_BDCKU_,GG_OFRFT
ATTEN'I]ON- RAYON_'&t4"NTLASERIt__ISIBLEOLASSEI_ ENCASDOU_ERTURE
[] Sales and Support Information
(For the United Kingdom and Republic of ireland)
Customer Care Centre
. For UK customers: 08705 357357
• For Republic of Ireland customers: 01 289 8333
. Visit our website for product information
° E_mail: customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
• Order accessory and consumable items for your product
• Or go on line through our Internet Accessory ordering
• Most major credit and debit cards accepted.
° All enquiries transactions and distribution facilities are
• It couldn't be simpler!
, Also available through our Internet is direct shopping for
DONO IIEWDIRECTLY_'IITI OPTICALI'lS _U_tEr TS IE0£4_25, &2,I_lt/
BE_RAKffAL STRALE DIREF GENC_OOTIS_TINSTRg_,U,T
NDg_&TSE IGEp_ r_O OpTISKEINSTRgr,_E_,ffER
_L_XAfSO OPIS£LLAL_I EELLASUO2_L&N_ £ESEEN
r_lCHiDIR_" Mll @ rl,_C_£_, IrdS"R UN'ENTENBE'_C_ _N
_EP_£ R _RDER )IRC %NT f*_1[]_ DINS[RV_¢fNS DOP_IOU_
Inside of product
Tuotteen sisAIl_
Produktets innside
with ease and confidence by phoning our Customer
Care Centre Monday-Friday 9:OOam-5:3Opm. (Excluding
public holidays)
application at www.panasonic.co.uk
provided directly by Panasonic UK Ltd.
a wide range of finished products, take a browse on our
website for further details.
If the plug contains a removable fuse cover you must ensure that it is
refitted whenthe fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
A replacementfuse covercan bepurchased fromyour localdealer.
CAUTION!
IFTHEFITTEDMOULDEDPLUGtS UNSUITABLEFORTHESOCKET
OUTLETIN YOURHOMETHEN THE FUSESHOULDBE REMOVED
ANDTHE PLUGCUTOFF ANDDISPOSEDOF SAFELY,
THEREISA DANGEROFSEVEREELECTRICALSHOCKIFTHECUT
OFF PLUG ISINSERTEDINTO ANY 13-AMPERESOCKET.
If a new ptug is to be fitted please observethe wiring code as stated
below.
If in anydoubt please consult aqualified electrician,
IMPORTANT
The wiresin thismains leadarecdoured inaccordancewith thefollowing
code:
Blue: Neutral,Brown:Live.
Asthesecoloursmaynotcorrespondwiththecolouredmarkingsidentifying
the terminals in yourplug,proceed as follows:
The wire which iscoloured BIuemustbe connectedtothe terminatwhich
is markedwith the letter N or coloured Back or Blue.
Thewirewhichiscdoured Brownmustbeconnectedtothe terminalwhich
is markedwith the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH
TERMINALWHICH IS MARKEDWITHTHE LETTER E, BYTHE EARTH
SYMBOL OR COLOURED GREENOR GREEN/YELLOW.
THIS PLUG IS NOTWATERPROOF--KEEP DRY,
Before use
Removetheconnector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug
(figures A and B). Confirm the AC mains ptug fitted and follow the
instructionsbelow.
Illustrationsmay differ from actualAC mains plug.
1.Open the fuse coverwith ascrewdriver.
Figure B
FUS@ COV@_
d
2. Replace the fuse and close or attachthe fuse cover.
Figure A Figure B
S
>
©
cc
mpero) ampere)
- you see this symbol-
information on Disposal for Users of Waste Electrical &
Electronic Equipment
(private households)
This symbol on the products and/or
accompanying documents means that used
be mixed with general household waste.
For proper treatment, recovery and recycling,
electrical and electronic products should not
please take these products to designated
collection points, where they will be accepted
on a free of charge basis. Alternatively, in
some countries you may be able to return
your products to your local retailer upon the
purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable
resources and prevent any potential negative effects on
human health and the environment which could otherwise
arise from inappropriate waste handling. Please contact
your local authority for further details of your nearest
designated collection point.
Penalties may be applicable for incorrect disposat of this
waste, in accordance with national legislation.
For business users in the European Union
if you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further
information.
m
Place the front speakers so that the tweeter is on the inside.
-- Tweeter --
Speakers are designed identically so that no left or right
channel orientation is necessary.
information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your
local authorities or dealer and ask for the correct method
of disposal.
iiiiiiiiii¸i¸i¸i¸i¸_¸_¸i_¸ii_¸ii_¸ii_¸ii_¸ii_¸ii_¸ii_¸ii_¸ii_¸ii_¸i¸iiiiiiiiiiii_ijii!iiii!iiii!ijii!ijii!ijii!ijii!iii_ iiiiiiii_ijii!ijii!ijii!ijii!iiii!iiii!iiii!iiiii_i{ii_ii_ii_ii_ii_ii_ii_ii_{iiii_iiiiiii!i_
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
T,_,M,_, LAITE ON TARKOITETTU K,_YTETT,_V,_,KSI
LEUDOSSA ILMASTOSSA.
You cannot take the front net off the speakers.
Use only the supplied speakers.
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
Note:
• Keep your speakers at least 1gram away from the system for proper
ventilation.
• These speakers do not have magnetic shielding, De not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
• You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
• Reduce the volume inthe following cases to avoid damage,
- When playing distorted sound.
- When adjusting the sound quality,
Caution
* Use the speakers only with the recommended
system. Failure to do so can damage the amplifier
and speakers, and can cause fire. ConsuEt a qualified
service person if damage occurs or if a sudden
change in performance is apparent.
* Do not attach these speakers to walls or ceilings.
o
cc
|
Connect the AC mains lead only after all other connections have been made.
f
Connect the speaker cords.
Connect the AM loop antenna.
Blue Black Black
(R]_
V
To household mains socket
Connect the FM indoor antenna.
Tape the antenna where reception is best,
led (+)
Black (-)
Stand the antenna
up on its base.
Adhesiverer_
Adhesivererer_
tapejj
S
F--
©
cc
|
Ret_r panel of
this unit
FM outdoor antenna (net included}
75 £_coaxialcable
(not included)
AM outdoor antenna (not included)
li
Rear panel of
thisunit
l
Rear panel of
this unit
AM loop
(included)
• Disconnect the FM indoor antenna.
- The antenna should be installed by a competent
technician.
.... I Batteries
AA/RS,'LRS • Remove if the remote centre)is not going to be used for a long period of time.
, Insert so the poles (+ and -) match those in the remote control
Store in a cool, dark place.
Replace if the unit does not respond to the remote control even when held
close to the front panel,
Do not use rechargeable type batteries.
Mishandling of batteries in the remote centre) can cause electrolyte leakage,
which may cause afire.
• If electrolyte leaks front the batteries, consult your dealen
Wash thorough)y with water if electrolyte comes in contact with any part of
your body.
Do not:
, mix old and new batteries,
use different types at the same time.
heat or expose to flame.
take apart or short circuit.
attempt to recharge alka)ine or manganese batteries.
, use batteries if the coverin 9 has been peeled off.
• put heavy objects on the remote control.
• spill liquids onto the remote control
I Use
Aim at the remote control sensor, avoiding obstac}es, at a maximum range
of 7 m directly in front of the unit.
Refer to page 6 for the remote control sensor position.
= Run a piece of vinyl wire horizontally across a window or
other convenient location.
• Leave the loop antenna connected.
When the unit is first plugged in, a demonstration of its functions may be shown
on the display.
if the dame setting is off, you can show a demonstration by selecting "DEMO
ON'.
;;;i
:: Press and hold [DISPLAY, -DEMO].
The display changes each time the button is held down. o
NODEMO(o_)_ DEMOON(on)
:: While in standby mode, select "NO DEMO" to reduce power consumption, a
Note: |
OEMO function cannot be turned en when Dimmer ison,
Refertothenumbersinparenthesesforpagereference.
This indicator lights when the unit is connected
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit is
still consuming a small amount of power.
Disc skip/search, tape fast-forward/rewind,
AC supply indicator [AC
to the AC mains supply.
O Standby/on switch [V/I] (10, 18) -
Multiple discs change (8)
Display panel
Volume control
Tuner/Band selection (13)
Music port selection (16)
Music
Deck 1 s
tune/preset channel selection, time
adjustment (11)
Record (12, 16)
Display, demonstration (5)
H.BASS selection (15)
Deck 1 cassette holder,
Remote control signal
sensor
Disc trays
Disc tray open/close (7)
le disc change (8)
= Disc direct play (8)
Disc play/pause (7)
Headphone jack
(PHONES)
Avoid listening for
prolonged periods of
time to prevent hearing
damage.
Plug type: 3.5 mm stereo
(not included)
- _ Tape play (11)
pen (11)
(11)
(11)
m
To select the desired display during play mode.
Each time you press the button: Normal --* Reflection --_ (off)
Buttons such as O function the same as the controls on the main unit.
Play timer/record timer (14)
Sleep timer (15), -"3
Auto off [
Disc
Program
Play mode
Repeat
Delete
O
Album selection (7)
Intro selection (9) --
Marker memory/recall (9)
Clock/timer (14)
=Q
-_top/program clear (7, 9)
= Disc skip/search, tape fast=
forward/rewind, tune/preset
channel selection, time
adjustment, cursor
(7,9,12,13,14)
title search (9)
, characters (7, 9)
allows you to turn off the unit in
disc or tape mode only after left
unused for 10 minutes.
• Press and hold [-AUTO OFF] to
activate the function.
Press and hold [-AUTO OFF]
again to cancel.
The setting is maintained even if
the unit is turned off.
This auto off function
To dim the display
B
F--
©
cc
|
Display
Preset EQ (15)
Press the button to activate.
To mute the sound.
Press again to cancel.