Panasonic SC-AK280 Operating Instructions
Dear Customer
Thank you for purchasing this product.
For optimum performance and safety, please read
these instructions thoroughly before connecting,
operating or adjusting this product.
Please keep this manual for future reference.
Supplied
Accessories
Please check and identify the supplied
accessories.
Use numbers indicated in parentheses when
asking for replacement parts. (As of January
2009)
1 x AC mains lead
(K2CZ3YY00005)
1 x Remote control
(N2QAYB000387)
2 x Remote control
batteries
1 x FM indoor antenna
(RSA0007-L1)
1 x AM loop antenna
(N1DAAAA00001)
1 x Antenna plug
adaptor
(K1YZ02000013)
Operating Instructions
CD Stereo System
Model No. SC-AK280
These operating instructions are applicable to the
following system.
SYSTEM SC-AK280
MAIN UNIT SA-AK280
SPEAKERS SB-AK280
Operations in these instructions are described mainly using the remote control, but you can perform the
operations on the main unit if the controls are the same.
Your unit may not look exactly the same as illustrated.
Note:
“EB” on the packaging indicates the United Kingdom.
EB
RQTX0202-B
(Back of product)
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
Inside of product
2
RQT8043
RQTX0202
Caution for AC Mains Lead
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
Figure A
Figure B
Fuse cover
Figure A
Fuse (5 ampere)
Figure B
Fuse (5 ampere)
RQTX0202
3
RQT8043
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
■ Sales and Support Information
Customer Care Centre
• For customers within the UK: 0844 844 3852
• For customers within the Republic of Ireland:
01 289 8333
• Visit our website for product information
• E-mail: customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
• For customers: 0844 844 3856
• Order accessory and consumable items for your
product with ease and confi dence by phoning our
Customer Care Centre Monday-Thursday 9:00am5:30pm, Friday 9:30am-5:30pm (Excluding public
holidays).
• Or go on line through our Internet Accessory
ordering application at www.panasonic.co.uk.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities
are provided directly by Panasonic UK Ltd.
• It couldn’t be simpler!
• Also available through our Internet is direct
shopping for a wide range of fi nished products,
take a browse on our website for further details.
Interested in purchasing an extended guarantee?
Please call 0870 240 6284 or visit our website
www.panasonic.co.uk/guarantee.
4
RQT8043
RQTX0202
Safety precautions
Table of contents
PlacementPlacement
Set the unit up on an even surface away from
direct sunlight, high temperatures, high humidity,
and excessive vibration. These conditions can
damage the cabinet and other components, thereby
shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to
avoid distortion and unwanted acoustical effects.
Do not place heavy items on the unit.
VoltageVoltage
Do not use high voltage power sources. This can
overload the unit and cause a fi re.
Do not use a DC power source. Check the source
carefully when setting the unit up on a ship or other
places where DC is used.
AC mains lead protectionAC mains lead protection
Ensure the AC mains lead is connected correctly and
not damaged. Poor connection and lead damage
can cause fi re or electric shock. Do not pull, bend, or
place heavy items on the lead.
Grasp the plug fi rmly when unplugging the lead.
Pulling the AC mains lead can cause electric shock.
Do not handle the plug with wet hands. This can
cause electric shock.
Caution for AC Mains Lead .............................3
Safety precautions ..........................................5
Making the connections ..................................6
Placement of speakers ....................................7
Preparing the remote control ......................... 8
DEMO function .................................................8
Handling of the disc trays and discs .............8
Overview of controls ....................................... 9
Discs ............................................................... 11
Cassette tape – Play and record .................. 14
Using the FM/AM radio ..................................16
Using the timers ............................................17
Using sound effects ...................................... 19
USB ................................................................. 20
Using other optional equipments ................21
Troubleshooting guide ..................................23
Maintenance ...................................................25
When moving the unit ................................... 25
Specifi cations ................................................ 26
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
Foreign matterForeign matter
Do not let metal objects fall inside the unit. This can
cause electric shock or malfunction.
Do not let liquids get into the unit. This can cause
electric shock or malfunction. If this occurs,
immediately disconnect the unit from the power
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They
contain fl ammable gases which can ignite if sprayed
into the unit.
ServiceService
Do not attempt to repair this unit by yourself. If
sound is interrupted, indicators fail to light, smoke
appears, or any other problem that is not covered
in these instructions occurs, disconnect the AC
mains lead and contact your dealer or an authorised
service centre. Electric shock or damage to the unit
can occur if the unit is repaired, disassembled or
reconstructed by unqualifi ed persons.
Extend operating life by disconnecting the unit from
the power source if it is not to be used for a long
time.
RQTX0202
5
RQT8043
Making the connections
Connect the AC mains lead only after all the other connections have been made.
Antenna connectionsAntenna connections
Place the antenna where reception is best.
■ FM indoor antenna
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
Adhesive
tape
■ AM loop antenna
Push
Please refer to “Connecting to other
external unit” on page 22 for more
information on the AUX connection.
(R)
To household mains socket
Power supply connectionPower supply connection
Stand the
antenna up
on its base.
(L)
Black
White
Red
Click!
Speaker connectionsSpeaker connections
6
RQT8043
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3
BEFORE CONNECTION.
Insertion of connector
Even when the connector is perfectly inserted, depending on the
type of inlet used, the front part of the connector may jut out as
shown in the drawing. However there is no problem using the
unit.
Appliance inlet
Connector
For your reference
To save power when the unit is not to be used for a long time,
unplug it from the household mains socket. You will need to reset
some memory items after plugging in the unit.
Note:
• The included AC mains lead is for use with this unit only.
Do not use it with other equipment.
• Do not use an AC mains lead from other equipment.
RQTX0202
Connect the
left (L) side in
the same way
Optional antenna connectionsOptional antenna connections
Use outdoor antenna if radio reception is poor.
Note:
Disconnect the outdoor antenna when the unit is not in use.
Do not use the outdoor antenna during a lightning storm.
FM outdoor antenna
Rear panel of
this main unit
Use the antenna
plug adaptor
(included).
FM outdoor antenna
(not included)
75 Ω coaxial cable
(not included)
• Disconnect the FM indoor antenna.
• The antenna should be installed by a competent
technician.
Placement of speakers
Speakers are designed identically so that no left or
right channel orientation is necessary.
You cannot take the front net off the speakers.
Use only the supplied speakers.
The combination of the main unit and speakers
provide the best sound. Using other speakers can
damage the unit and sound quality will be negatively
affected.
AM outdoor antenna
Rear panel of
this main unit
AM outdoor antenna (not included)
5 to 12 m
Push
AM loop antenna (included)
• Run a piece of vinyl wire horizontally across a
window or other convenient location.
• Leave the loop antenna connected.
Note:
• Keep your speakers at least 10mm away from the
system for proper ventilation.
• These speakers do not have magnetic shielding.
Do not place them near televisions, personal
computers or other devices easily infl uenced by
magnetism.
• You can damage your speakers and shorten their
useful life if you play sound at high levels over
extended periods.
• Reduce the volume in the following cases to avoid
damage.
– When playing distorted sound.
– When adjusting the sound quality.
Caution
• Use the speakers only with the recommended
system. Failure to do so can damage the
amplifi er and speakers, and can cause fi re.
Consult a qualifi ed service person if damage
occurs or if a sudden change in performance
is apparent.
• Do not attach these speakers to walls or
ceilings.
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
RQTX0202
7
RQT8043
Preparing the remote control
Use alkaline or manganese batteries.
Insert so the poles (+ and –) match those in
the remote control.
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
R6/LR6, AA
DEMO function
Aim at the remote control signal sensor (\ page 9), avoiding
obstacles, at a maximum range of 7 m directly in front of the
unit.
Note on using the remote control
• Do not mix old and new batteries.
• Do not use different types of batteries at the same time.
• Do not take apart or short circuit the batteries.
• Do not attempt to recharge alkaline or manganese
batteries.
• Do not use batteries if the covering has been peeled off.
Do not heat or expose to fl ame.
•
Do not leave the battery(ies) in an automobile exposed
•
to direct sunlight for a long period of time with doors and
windows closed.
• Mishandling of batteries in the remote control can cause
electrolyte leakage, which may cause a fi re.
• Remove the batteries if the remote control is not going
to be used for a long period of time. Store in a cool, dark
place.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
When the unit is fi rst plugged in, a demonstration of its
functions may be shown on the display.
If the demo setting is off, you can show a demonstration by
selecting “DEMO ON”.
Press and hold [ 7, –DEMO] (demo) on the main unit.
The display changes each time you press and hold the
button.
7, –DEMO
NO DEMO (off)
While in standby mode, select “NO DEMO” to reduce power
consumption.
Note:
DEMO function cannot be turned on when dimmer function
is on.
DEMO ON (on)
Handling of the disc trays and discs
Not doing the following will cause damage to the unit.
Removing the mains plug
Press [y/I] to turn off the unit and remove the mains plug only after all the displays have disappeared.
Inserting a disc
Tray caution
8
RQT8043
• Place the disc correctly with the label facing up as shown in
the diagram.
RQTX0202
• Insert one disc into the tray.
• Always press [0, OPEN/CLOSE] to insert
or remove a disc.
• Do not push or pull out the tray by hand as
this will cause an accident.
Overview of controls
Main unitMain unit
Refer to the numbers in parentheses for page reference. Buttons labelled such as 1 function in exactly the
same way as the controls on the remote control (\ page 10).
Display panel (12)
Disc trays
1 Standby/on
switch [y/l] (8, 25)
Press to switch
the unit from on to
standby mode or vice
versa. In standby
mode, the unit is still
consuming a small
amount of power.
9
Tape recording
function (15)
2
USB port (20)
8 Tape play (14)
Music port or AUX
selection (21, 22)
Cassette deck open
(14)
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
Disc tray open or
close (8)
Disc change (12)
Track skip function
(11, 20)
7
Disc direct play (11)
6
Manual EQ’s bass
control setting (19)
4
Remote control
signal sensor
Music port jack (21)
Headphone jack ( )
Avoid listening for
prolonged periods
of time to prevent
hearing damage.
Excessive sound
pressure from
earphones and
headphones can
cause hearing loss.
Plug type: Ø 3.5 mm
stereo (not included)
Stop playback (11),
Demonstration
function (8)
5
3
Cassette holder
(14)
RQTX0202
9
RQT8043
Loading...