Page 1
• High-Definition 1280 x 720 LCD panels for high quality images
• Newly-developed “Cinema Works” circuit
- 10-bit full digital processing and digital gamma correction
- Projector AI
- Dynamic Sharpness Control (DSC)
- Digital Cinema Reality (DCR)
• New Smooth Screen technology for film-like smooth image reproduction
• 2058-pattern user-adjustable picture equalizing including 6 picture mode (Normal,
Dynamic, Cinema 1, Cinema 2, Video, Natural)
• 850 lumens brightness and 1300:1* contrast ratio
• Vertical/horizontal keystone correction
•Quiet 27 dB**
•A wide variety of terminals featuring DVI with HDCP
- 1 -
S P E C F I L E
PRODUCT NO.: PT-AE500E
PRODUCT NAME: Home Cinema Projector
MAJOR FEATURES
* In AI mode
** In low lamp power mode
Page 2
2
PT-AE500E
Home Cinema Projector
S P E C F I L E
Specifications
Power supply: 100–240 V AC, 50/60 Hz
Power consumption: 180 W (1 W in standby mode with fan stopped)
Optical system: Dichroic mirror separation/prism synthesis system
LCD panel: Panel size: 0.7˝ (diagonal) (16:9 aspect ratio)
Display method: Transparent LCD panel (x 3, R/G/B)
Drive method: Active matrix
Pixels: 921,600 (1280 x 720) x 3, total of 2,764,800 pixels
Pixel configuration: Stripe
Lens: Manual zoom/focus lens (1:1–1:1.2),
F 1.9–2.2, f 22.0–26.2 mm
Lamp: 130 W UHM™ lamp
Screen size: 1,016–5,080 mm (40–200 inches) diagonally, 16:9 aspect ratio
Colours: Full colour (16,777,216 colours)
Colour system: PAL, PAL-M, PAL-N, PAL 60, SECAM, NTSC, NTSC 4.43
Screen aspect ratio: 16:9 (4:3 compatible)
Brightness: 850 lumens*
1
Centre-to-corner uniformity ratio: 90%
Contrast: 1300:1*2(full on/full off)
Resolution: RGB: 1280 x 720 pixels (1920 x 1080 pixels with compression)
Scanning frequency: RGB: Horizontal: 30–70 kHz, Vertical: 50 –87 Hz
YPBPR: 480i (525i): fH 15.75 kHz; fV 60 Hz
576i (625i): fH 15.63 kHz; fV 50 Hz
480p (525p): fH 31.5 kHz; fV 60 Hz
576p (625p): fH 31.25 kHz; fV 50 Hz
720p (750p): fH 45 kHz; fV 60 Hz
1080i (1125i): fH 33.75 kHz; fV 60 Hz
1080i (1125i): fH 28.125 kHz; fV 50 Hz
S-Video/Video: fH 15.625 kHz; fV 50 Hz (PAL, SECAM, PAL-N)
fH 15.75 kHz; fV 60 Hz (NTSC, NTSC 4.43, PAL-M, PAL 60)
Optical axis shift: 17:1 (fixed)
Keystone correction range: Vertical: approx. ±30°, horizontal: approx. ±30°
Installation: Ceiling/desk, front/rear (menu selection)
Terminals: DVI-D IN: DVI-D 24-pin x 1
PC (RGB) IN: D-sub HD 15-pin (female) x 1
R, G, B: 0.7 Vp-p (1.0 Vp-p for Sync on G), 75Ω
HD/VD/SYNC: TTL, high impedance (positive/negative polarity)
COMPONENT IN: RCA pin (Y, PB/CB, PR/CR) x 1,
Y: 1.0 p-p, 75Ω
PB/P
R (CB/CR): 0.7 Vp-p, 75Ω
VIDEO IN: RCA pin x 1, 1.0 Vp-p, 75Ω
S-VIDEO IN: Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75Ω
TRIGGER (out): M3 jack, (stereo mini)
When the power is turned on during projection: 12 V
When the power is turned off: 0 V
AV1*
3
: SCART (Euroconnector) x 1
Power cord length: 3 m
Cabinet material: ABS/PC
Dimensions (W x H x D): 280 x 85 x 278.5 mm (11˝ x 3-11/32˝ x 10-9/16˝ )
Weight: 2.9 kg (6.4 lbs.)
Operating environment: Temperature: 0° – 40°C (32°–104°F)
Humidity: 20%– 80% (no condensation)
Remote Control Unit: Power supply: 3 V DC (UM-4 (AAA) battery x 2)
Operation range: Approx. 7 m when operated from directly in front of the signal receptor)
Dimensions (W x H x D):
43 x 135 x 22 mm (1-11/16˝ x 5-5/16˝ x 7/8˝)
Weight: 70 g (2.5 oz.) (including batteries)
Supplied accessories: Power cord, Wireless remote control unit, Batteries for remote control
(UM-4 x 2), AV cable (3 m/9.9´), Carrying bag
Optional accessories: Replacement lamp unit: ET-LAE500
Ceiling mount bracket: ET-PKE300
80˝–90˝ screen: ET-SR90CT
65˝–70˝ screen: ET-SR70CT
Weights and dimensions shown are approximate.
Specifications subject to change without notice.
As of September 2003
*
1: The figures are averages of all products at the time of shipment, and are indicated in accordance with JIS X6911: 2003
Data Projector Specifications Format. The measurement method and conditions are described in Appendix 2.
*
2: In AI mode
*
3: Available only in limited countries and areas.
Page 3
3
PT-AE500E
Home Cinema Projector
S P E C F I L E
As of September 2003
Dimensions
unit: mm (inch)
Note: This illustration is not drawn to scale.
Terminals
RGB IN connector pin assignment
1 Trigger output
2 Video input
3 S-Video input
4 DVI-D input
5 PC (RGB) input (D-sub HD 15-pin)
6 Component (YP
BPR/YCB CR) input
7 AV1 (SCART) connector
no. signal
6 GND
7 GND
8 GND
9NC
10 GND
no. signal
11 NC
12 SDA*
13 HD/SYNC
14 VD
15 SCL*
no. signal
1 R/PR
2 G/Y
3 B/PB
4 GND
5 GND
* Effective when connected to a PC having proper functions.
D-sub HD 15-pin, female
DVI-D connector pin assignment
DVI-D 24-pin
no. signal
1 T, M, D, S data 22 T, M, D, S data 2+
3 T, M, D, S data 2/4 shield
4 T, M, D, S data 45 T, M, D, S data 4+
6 DDC clock
7 DDC clock
8NC
no. signal
9 T, M, D, S data 110 T, M, D, S data 1+
11 T, M, D, S data 1/3 shield
12 T, M, D, S data 313 T, M, D, S data 3+
14 +5 V
15 GND
16 Hot plug detection
no. signal
17 T, M, D, S data 018 T, M, D, S data 0+
19 T, M, D, S data 0/5 shield
20 T, M, D, S data 521 T, M, D, S data 5+
22 T, M, D, S clock shield
23 T, M, D, S clock +
24 T, M, D, S clock -
Page 4
4
PT-AE500E
Home Cinema Projector
S P E C F I L E
As of December 2003
Standard setting-up positions
unit: mm
NOTE:
Illustrations show the projector installed
using optional ceiling bracket.
This illustration is not drawn to scale.
Computer data compatibility
This projector accepts up to 70 kHz horizontal scanning frequency and 100 MHz dot clock.
NOTE: The display resolution of this projector is 1280 x 720 pixels. If the display resolution indicated in the above data does not match this
resolution, the input signal will be converted to 1280 x 720 pixels (16:9 aspect ratio) or 960 x 720 pixels (4:3 aspect ratio).
1.2 m /
1.9 m /
2.5 m /
3.1 m /
4.7 m /
6.2 m /
Diagonal image sizeAspect ratio Distance to screen
min. max.
40˝
60˝
80˝
100˝
150˝
200˝
/
/
/
/
/
/
1.5 m /
2.3 m /
3.0 m /
3.8 m /
5.7 m /
7.6 m /
3.9´
6.2´
8.3´
10.2´
15.4´
20.3´
4.9´
7.5´
9.8´
12.5´
18.7´
24.9´
1.4 m /
2.2 m /
2.9 m /
3.7 m /
5.6 m /
7.4 m /
1.8 m /
2.7 m /
3.6 m /
4.6 m /
6.9 m /
9.2 m /
4.6´
7.2´
9.5´
12.1´
18.4´
24.3´
5.9´
8.9´
11.8´
15.1´
22.6´
30.2´
40˝
60˝
80˝
100˝
150˝
200˝
1.0 m
1.5 m
2.0 m
2.5 m
3.8 m
5.1 m
1.0 m
1.5 m
2.0 m
2.5 m
3.8 m
5.1 m
16:9
4:3 /
/
/
/
/
/
/
/
/
/
/
/
3.3´
4.9´
6.7´
8.3´
12.5´
16.7´
3.3´
4.9´
6.7´
8.3´
12.5´
16.7´
/
/
/
/
/
/
Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.
Aspect ratio 16 : 9
minimum L (m) = (diagonal screen size in inches) x 0.0312 - 0.0381
maximum L (m) = (diagonal screen size in inches) x 0.0376 - 0.0381
Aspect ratio 4 : 3
minimum L (m) = (diagonal screen size in inches) x 0.0382 - 0.0381
maximum L (m) = (diagonal screen size in inches) x 0.0461 - 0.0381
Loading...