Panasonic LR03XWA User Manual

Industrial
Part Number: LR03XWA
(Replaces Panasonic part number AM-4PI)
Alkaline-Zinc/Manganese Dioxide
Industry Standard Dimensions mm (inches)
Dimensions Comply with ANSI and IEC Standards
AAA (LR03XWA)
Specifications
Dimensions Millimeters Inches
A Max 44.5 1.752
B Min 43.5 1.713
C Min 4.3 0.169
F Max 3.8 0.150
G Min 0.8 0.031
OD Max 10.5 0.413
OD Min 9.5 0.374
Batteries for every application and industry including:
Medical
Communications•Government/Municipality•HVAC
Contractors
Manufacturing
Hotel/Motel/Restaurant
Janitorial/Sanitation
Military/Defense
Transportation
Power Plants
Security
Chemical System:
Designation:
Operating Temperature Range:
Typical Weight:
Typical Volume:
Terminals:
Shelf Life:
Heavy Metals Content:
Alkaline-Zinc/Manganese Dioxide (Zn/MnO2)
ANSI-24A, IEC-LR03
1.5V
-20°C to 54°C (-4°F to 130°F)
11.0 grams (0.38 oz.)
3.8 cm3(0.2 in.3)
Cap and base
7 years (80% Capacity)
No added Mercury, Cadmium or Lead
Page 1 of 2
Important Notice: This data sheet contains typical information specific to products manufactured at the time of its publication.
Photos represent typical industrial applications but may or may not match the battery size on this data sheet.
AAA
AAA
AAA
Industrial
Remote Control (24ohm 15spm, 8hpd)
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
0 5 10 15 20 25
Duration (Hours)
Voltage (CCV)
AAA
Tape - Electronic Game (100mA 1hpd)
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
036912
Duration (Hours)
Voltage (CCV)
Duration (Hours)
Voltage (CCV)
Duration (Minutes)
Voltage (CCV)
AAA
AAA
AAA
Lighting (5.1ohm 4mph, 8hpd)
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
012345
Photoflash (600mA 10spm, 1hpd)
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
0 15 30 45 60 75 90
AAA (LR03XWA)
Part Number: LR03XWA
(Replaces Panasonic part number AM-4PI)
Alkaline-Zinc/Manganese Dioxide
Typical Discharge Characteristics with
Constant Current at 20°C
IEC/ANSI Standard Tests @ 20°C
Typical Discharge Characteristics with
Constant Resistance at 20°C
ypical Temperature Characteristics
T
0.9 Volts Cutoff Voltage
This information is generally typical and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to modification without notice. Cell/battery performance and service life depends on the operating temperature, cut-off voltage and load applied to cell/battery in a specific application.It is the responsibility of each user to ensure that each cell/battery application is adequately designed safe and compatible with all conditions encountered during use and in conformance with existing standards and requirements. Contact Panasonic for the latest information.
©2009 Panasonic Energy Corporation ofAmerica. All rights reserved. All reproductions prohibited without proper authorization. Characteristics and specifications subject to change without prior notification.
Panasonic Energy Corporation of America www.panasonic.com/industrial/battery/industrial e-mail: batteries@us.panasonic.com
Page 2 of 2
Panasonic Canada Inc. www.panasonic.ca e-mail: ind_batteries@ca.panasonic.com
Form AAAInd PEC-2.2009
Loading...