Panasonic KX-VC2000, KX-VC1000, KX-VC2000SX, KX-VC1300, KX-VC1600 Basic Operation Manual

Confirm that the other equipment (display, video
cameras, etc.) is connected to the HD
Communication Unit, and the power is turned
on for all the equipment.

When the mark is displayed;

When the connection cannot be established:

When there is a problem with the connection, or with one of the connected devices,
or when there is a device that is not connected, the "—" mark will be displayed.
Check that the devices being used are properly connected to the main unit, that the
power is turned on for all connected devices, and that no more than 5 boundary
microphones (digital interface type) are connected.

Press [STATUS].

Press [BACK] to return

to the previous screen.

The following methods can also be used to make a call.

Calling from the Call History Calling by entering an address directly

You can also enter a speed dial number, which are displayed in
numerical order (1 to 600), to select the party you want to call.

During multiple-party video conference calls, a dialogue box
to select the party whom you want to disconnect is displayed.

Press [END]. The Home screen is displayed.

When there is an incoming call ring and a dialogue box is
displayed, press [START].

If Automatic Answer is set, when a video conference call is
incoming the call will be automatically answered after one
ring, and transmission then begins.

Basic Operation Guide

HD Visual Communication Unit

Model No.

Starting a Video Conference

Before Starting a Video Conference

Starting a Video Conference

Press [HOME].

Press a "One-Touch Connection number (1-5)".

Select "Contact List" using [▲][▼] and press [ENTER].
Select the entry you want to call using [▲][▼][◄][►].

Select "Profile" using [▲][▼] and press [ENTER].
Select the profile you want to use to make a call using [▲][▼].

Press [START] to start the call.

Calling Using One-Touch Connection number From the
Home Screen

Press [MENU].

Calling from the Contact List

Answering a Video Conference Call

Ending a Video Conference Call

Press [MENU].

Calling using a Profile

Turn on the power to the
main unit.

The Home screen is displayed.

• The information registered in the selected
One-Touch Connection number is displayed.

KX-VC1600A/KX-VC1300A

KX-VC2000/KX-VC1600/KX-VC1300/KX-VC1000/
KX-VC2000SX/KX-VC1600SX/KX-VC1300SX/
KX-VC1000SX/KX-VC1600A/KX-VC1300A

KX-VC2000/KX-VC1600/KX-VC1300/KX-VC1000/
KX-VC2000SX/KX-VC1600SX/KX-VC1300SX/
KX-VC1000SX/KX-VC1600A/KX-VC1300A

Press the

button

Remote Control Operation

Frequently used functions are assigned their own buttons
on the remote control for easy operation.

Useful Functions (Audio)

End CallStart Call

Color Buttons

Camera Zoom

Change to
PC Screen

Change to
Sub Video

Camera Image

During a video conference call, the "VOLUME" can
be adjusted.

During a video
conference call:
Green LED (on)

MIC Mute: Red LED (on)

[ ] Increase the volume
[ ] Decrease the volume

[Up] Tilt upwards
[Down] Tilt downwards
[Left] Pan left
[Right] Pan right

[ ] Zoom in
[ ] Zoom out

Using the

remote control:

Using the microphone unit:

When the call ends, the volume will return to the pre-set value.

Useful Functions (Video) Useful Functions (Other)

To end the sharing of contents, press [CAMERA MAIN].

Status Display

End Contents

Sharing

Change

Screen Layout

Connect to
the Sub jack
of HDMI.

Connect to
the HDMI
jack of PC In.

Switch to the shared
content's image

Switch to the Camera's
image

Ex.: Using a single screen during single
stream communication

MIC Mute status

During a video conference c all, press [CAM CTRL] to control the other party's video
camera.

Other site

This

site

This site

Other site This site

Microphone

Mute

Other site

MG-HDCE036EN

Basic Operation Guide

HD Visual Communication Unit

Model No.

Useful Operations

Adjusting the Volume

During a video conference call, press [LAYOUT].

Changing the Screen Layout

You can control a connected PTZ (Pan/Tilt/Zoom) camera.

Press the [LAYOUT] button repeatedly to cycle through
the difference layout configurations.

Controlling a Video Camera

You can share the contents of a computer's screen or the image of the sub video
camera with the other party.

The other party's image is displayed again.

Supported Resolutions PC: Full-HD, WSXGA+, UXGA, WXGA++, WXGA+, FWXGA, SXGA,

WXGA, HD, XGA, SVGA, VGA / Sub Video Camera: Full-HD, HD

Displaying a Computer's Screen or the Sub Video Camera's Image

During a video conference call, you can mute the microphone (MIC MUTE) so that your
voice cannot be heard by the other party.

Muting the Microphone

The volume can be adjusted during a video
conference call.
The remote control included with the HD
Visual Communication Unit can be used to
adjust the volume of the unit itself.
Likewise, the display's remote control can
be used to adjust the volume of the display.

Ex.: Sub-site, 1 display, Single stream communication