Panasonic KXTG484SK Operating Instructions

Base unit
1
Connect the AC adaptor to the unit by pressing the plug firmly.
2
3
Connect the AC adaptor to the power outlet.
4
Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click.
5
A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.
Note:
L
Use only the supplied Panasonic AC adaptor PNLV226.
Charger
1
Connect the AC adaptor to the power outlet.
TGE26x_27x_QG(en).fm Page 1 Thursday, January 22, 2015 3:37 PM
Model No. KX-TGE260/KX-TGE262/KX-TGE263
KX-TGE264/KX-TG454SK/KX-TG484SK
KX-TGE270/KX-TGE272/KX-TGE273
KX-TGE274/KX-TGE275/KX-TG465SK
Quick Guide
Connections
1
4
2
Printed in Malaysia
3
4
5
1
PNQW3881YA TT1113WK1015
1
2
TGE26x_27x_QG(en).fm Page 2 Thursday, January 22, 2015 3:37 PM
Battery installation/Battery charging
Charge for about 7 hours.
1
2
Note:
L USE ONLY rechargeable Ni-MH batteries AAA (R03) size L Do NOT use Alkaline/Manganese/Ni-Cd batteries. L Confirm correct polarities (S, T). L Follow the directions on the display to set up the unit. L Confirm Charging” is displayed
()
.
Operating tips
Soft keys
By pressing a soft key, you can select the feature shown directly above it on the display. Pay attention to the display to see what functions the soft keys are assigned during operation.
Navigator key
{^}, {V}, {<}, or {>}: Scroll through various lists
and items.
v (Volume: {^} or {V}): Adjust the receiver or
speaker volume while talking.
{<} k: View the phonebook entry.{>} REDIAL: View the redial list.{V} CID (Caller ID): View the caller list.
{<}
Date and time (Handset)
1 {MENU}(1)1 2 Enter the current month, date, and year. s {OK} 3 Enter the current hour and minute (12-hour clock format). 4 *: Select “AM” or “PM”. s {SAVE} s {OFF}
().
{^}
{>}
{V}
– 2 –
TGE26x_27x_QG(en).fm Page 3 Thursday, January 22, 2015 3:37 PM
Recording your greeting message for the answering system for the landline (Handset)
If you use a pre-recorded greeting message, you do not need to record your own greeting message.
1 {MENU}(3)2 s {r}: “Yess {SELECT} 2 After a beep sounds, hold the handset about 20cm (8 inches) away and speak clearly into
the microphone (2 minutes max.).
3 Press {STOP} to stop recording. s {OFF}
Link to cell
You can connect your base u nit and cellular phone using Blu etooth® wireless technology, so that you can make or answer cellular calls using your phone system. For more details, please visit our Web site: http://www.panasonic.com/link2cell L Locate your cellular phone near the base unit . If the cell ular phone is too close to the base unit
during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
1
2
1 Cell line 2 Cell phone service providers
Trademarks
L The Bluetooth
and any use of such marks by Panasonic Corporation is under license.
L All other trademarks identified herein are the property of their respective owners.
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,
– 3 –
Loading...
+ 7 hidden pages