Panasonic KX-TG472SK, KX-TG473SK, KX-TGH264, KX-TGH263, KX-TGH262 User Manual
...
Model No. KX-TGH260/KX-TGH262
KX-TG472SK/KX-TGH263
KX-TGH264/KX-TG473SK
Quick Guide
Connections
Base unit
1
Connect the AC adaptor to the unit by pressing the plug firmly.
2
Fasten the cord by hooking it.
3
Connect the AC adaptor to the power outlet.
4 Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click.
5
A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.
Note:
L
Use only the supplied Panasonic AC adaptor PNLV226.
1
4
2
Charger
1
Connect the AC adaptor to the power outlet.
Printed in Malaysia
3
4
5
1
PNQW3912ZA TT1113MG0
Battery installation/Battery charging
1
2
Charge for about 7 hours.
1
2
Note:
L USE ONLY rechargeable Ni-MH batteries AAA (R03) size
L Do NOT use Alkaline/Manganese/Ni-Cd batteries.
L Confirm correct polarities (S, T).
L Follow the directions on the display to set up the unit.
L Confirm “Charging” is displayed
()
.
Operating tips
Soft keys
By pressing a soft key, you can select the feature
shown directly above it on the display. Pay attention
to the display to see what functions the soft keys are
assigned during operation.
Navigator key
− {^}, {V}, {<}, or {>}: Scroll through various lists
and items.
− v (Volume: {^} or {V}): Adjust the receiver or
speaker volume while talking.
− {<} k: View the phonebook entry.
− {>} REDIAL: View the redial list.
− {V} CID (Caller ID): View the caller list.
{<}
().
{^}
{>}
{V}
– 2 –
Date and time (Handset)
1 {MENU} (right soft key) (1)1
2 Enter the current month, date, and year. s {OK}
3 Enter the current hour and minute (12-hour clock format).
4 *: Select “AM” or “PM”. s {SAVE} s {OFF}
Recording your greeting message for the answering system
for the landline (Handset)
If you use a pre-recorded greeting message, you do not need to record your own greeting
message.
1 {MENU} (right soft key) (3)2 s {r}: “Yes” s {SELECT}
2 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into
the microphone (2 minutes max.).
3 Press {STOP} to stop recording. s {OFF}
Link to cell
You can connect your base unit and cellular phone using Bluetooth® wireless technology, so that
you can make or answer cellular calls using your phone system. For more details, please visit our
Web site: http://www.panasonic.com/link2cell
L Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit
during a cellular call, you may hear noise. For best performance, we recommend placing the
cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
1
2
1 Cell line
2 Cell phone service providers
Trademarks
L The Bluetooth
and any use of such marks by Panasonic Corporation is under license.
L All other trademarks identified herein are the property of their respective owners.
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,
– 3 –
Loading...