Panasonic KX-TG2503NZF, KX-TG2503ALF User Manual

PLEASE READ BEFORE USE AND SAVE.

2.4GHz Cordless Phone

Model No. KX-TG2503ALF

KX-TG2503NZF

Operating Instructions

1 Getting Started 2 Making/Answering Calls 3 Speed Dialler 4 One-Touch Dialler 5 Special Features 6 Things You Should Know

Contents by Section

Charge the battery for about 6 hours before initial use.

For your future reference

Serial No. Date of purchase (found on the bottom of the unit)

Name and address of dealer

Attach or keep original receipt to assist with any repair under warranty.

Kyushu Matsushita Electric Co., Ltd.

1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

Printed in Malaysia PQQX13027ZB-BM SM0401SA1071

For New Zealand Customers

Panasonic New Zealand operates a toll free Customer Support Centre. Please phone 0800 Panasonic (0800 726276) for assistance.

Getting Started

1-A Accessories

1-C Settings

1-B Location of Controls

Handset

Base unit

AC Adaptor................................one

Telephone line Cord..................one

Telephone Plug .........................one

Belt Clip.....................................one

Raise the antennas.

Charge the battery for 6 hours.

•See section 6-A for more details.

•The IN USE/CHARGE indicator lights.

Connect as shown.

Back Side

Antenna (1-C)

Cradle Lock Switch (6-F)

(HANDSETÒLOCATOR)

Button (5-D)

Charge Contacts (6-A)

IN USE/CHARGE Indicator (1-C, 5-D)

TALK

PAUSE

RECALL

CHCH

IAL

REDIAL

AUTOAUTO

PROGRAM

DIRECT

LOUD LOUD R

RINGER

Navigator Key

(LOUD/RINGER , ,

AUTO , PROGRAM )

(

2-A, 2-B, 3-A, 4-A, 5-A

)

TALK Indicator (2-A)

RECHARGE Indicator (6-A)

Antenna

(RECALL) Button (5-A)

(TALK) Button

(2-A)

Charge Contact (6-A)

(CH) (Channel) Button (2-A)

Headset Jack (1-E)

(PAUSE) Button (5-C)

(REDIAL) Button (2-A)

(DIRECT) Button (4-A)

IN USE/CHARGE Indicator

To Power Outlet (AC 230 V–240 V, 50 Hz)

AC Adaptor

Telephone Line Cord

Raise the antennas.

Fasten the cords to prevent them from disconnecting.

Hooks

Telephone Plug

For New Zealand

To Single-Line Telephone Jack

Telephone Line Cord

To Socket

For Australia

STOP

Wall Mounting Adaptor..............one

For Australia For New Zealand

For Australia only

•USE ONLY WITH Panasonic AC ADAPTOR PQLV1AL.

•The AC adaptor must remain connected at all times. (It is

normal for the adaptor to feel warm during use.)

•To connect a standard telephone on the same line, see section 6-D.

•KX-TG2503ALF/KX-TG2503NZF is not designed to be used with rotary (pulse dialling) services.

Getting Started

Section 1

Selecting the ringer volume

The TALK indicator light must be off.

•To select HIGH (preset) or LOW,

press

Ñ or Ö.

Each time you press

Ñ or Ö, the ringer volume will

change and the selected volume will ring.

•To turn the ringer OFF,

press and hold

Ö until 2 beeps sound.

•To turn the ringer ON,

press Ñ. The ringer will sound at the HIGH level.

•

When you replace the battery, the selected ringer volume setting will return to the factory default.

To redial the last number dialled

Press (TALK) \ (REDIAL).

To select the receiver volume

3 levels (HIGH, MEDIUM, LOW) are available. Press

Ñ or Ö while talking.

•Each time you press

Ñ or Ö, the volume

level will change.

If noise interferes with the conversation

Press (CH) to select a clearer channel or move closer to the base unit.

If the handset is off the base unit, press (TALK).

•You can also answer a call by pressing any dialling button

(0) to (9), (*) or (#) (— Any Key Talk).

If on the base unit, just lift up.

2-B Answering Calls2-A Making Calls

Press (TALK).

•The TALK indicator lights.

•If an alarm tone sounds, see 6-E.

Dial a phone number.

To hang up, press (TALK) or place the handset on the base unit.

Section 2

Making/Answering Calls

(REDIAL)

TALK Indicator

(TALK)

(CH)

Backlit handset keypad

The handset dialling buttons will light when you press a button or lift the handset off the base unit, and flash when a call is received. The lights will go out a few seconds after pressing a button, lifting the handset or answering a call.

• For best operating performance, see section 6-C.

You can hang the handset on your belt or pocket using the belt clip.

To attach the belt clip

To remove the belt clip

1-D Belt Clip

Plugging an optional headset into the handset allows a hands-free phone conversation. Please use only the Panasonic KX-TCA88 headset.

Connecting the optional headset to the handset

Open the headset jack cover, and connect the optional headset to the headset jack as shown.

When the optional headset is connected to the handset, make sure to use the headset to talk with the caller. If you want to have a normal cordless phone conversation, disconnect the headset.

1-E Optional Headset

Headset Jack

+ 5 hidden pages