Panasonic KX-TES824BX, KX-TEM824BX, KX-TE82461X, KX-TE82474X, KX-TE82480X Service Manual
...
ORDER NO. KMS0610644SE
Advanced Hybrid System
KX-TES824BX
KX-TEM824BX
KX-TE82461X
KX-TE82474X
KX-TE82480X
KX-TE82483X
KX-TE82491X
KX-TE82492X
KX-TE82493X
KX-A227X
(for Asia, Middle Near East, Latin America and Africa )
Please file and use this supplement manual together with the service manual for Model No. KXTES824BX/KX-TEM824B X Order No. KMS0502046C3.
© 2006 Panasonic Communaications Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
KX-TES824BX / KX-TEM824BX
1 CHANGES
1.1. SUBJECT 1
KX-TES824BX/KX-TEM824BX
Suffix Reason for suffix change
HtoI CAPACITOR addition
ItoJ Software change (IC705 : Ver. Y881AP to Y911AA)
JtoK Software change (IC705 : Ver. Y911AA to Y911AD)
KX-TE82461X (Made in Japan)
Suffix Reason for suffix change
BtoC APPROVAL LABEL addition, There is no change in the “REPLACEMENT PARTS LIST.”
KX-TE82461X (Made in Malaysia)
Suffix Reason for suffix change
AtoC APPROVAL LABEL addition, There is no change in the “REPLACEMENT PARTS LIST.”
KX-TE82474X/KX-TE82491X/KX-TE82492X (Made in Japan)
Suffix Reason for suffix change
BtoC APPROVAL LABEL addition, There is no change in the “REPLACEMENT PARTS LIST.”
CtoD APPROVAL LABEL addition, There is no change in the “REPLACEMENT PARTS LIST.”
KX-TE82474X/KX-TE82491X/KX-TE82492X (Made in Malaysia)
Suffix Reason for suffix change
AtoC APPROVAL LABEL addition, There is no change in the “REPLACEMENT PARTS LIST.”
CtoD APPROVAL LABEL addition, There is no change in the “REPLACEMENT PARTS LIST.”
KX-TE82480X/KX-TE82483X
Suffix Reason for suffix change
AtoB CAPACITOR addition
KX-TE82493X (Made in Japan)
Suffix Reason for suffix change
BtoC Improvement of CID Hum noise perfo rmance.
CtoD APPROVAL LABEL addition, There is no change in the “REPLACEMENT PARTS LIST.”
DtoE APPROVAL LABEL addition, There is no change in the “REPLACEMENT PARTS LIST.”
KX-TE82493X (Made in Malaysia)
Suffix Reason for suffix change
AtoC Improvement of CID Hum noise perfo rmance.
CtoD APPROVAL LABEL addition, There is no change in the “REPLACEMENT PARTS LIST.”
DtoE APPROVAL LABEL addition, There is no change in the “REPLACEMENT PARTS LIST.”
SUFFIX LOCATION
2
1.2. SUBJECT 2
KX-TES824BX / KX-TEM824BX
1.3. REPLACEMENT PARTS LIST
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column f or each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS.
1. Improve performance Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbol:B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts Set Production
V Original
New
W Original
New
X Original
New
Y Original
New
Z Other
Early (before change)
Late (after change)
Early (before change)
Late (after change)
Early (before change)
Late (after change)
Early (before change)
Late (after change)
1. Mark*3 has been changed at the same time.
2. Mark*4 has been changed at the same time.
3. Mark*5 has been changed at the same time.
4. Mark*6 has been changed at the same time.
5. Mark*7 has been changed at the same time.
For RoHS-compliant parts marked by *R
*1 Use only RoHS parts (new parts) for the production sets which serial No. labels are after
6CXXXXXXXXX.
*2 Either original or RoHS parts (new parts) can be used for the production sets which serial No.
labels are before 6BXXXXXXXXX.
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Original parts may be used in early production sets only. New parts may be used in early
or late production sets. Use original parts where possible, then stock new parts.
New parts only may be used in early or late production sets.
Stock new parts.
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
3
Loading...