Panasonic KX-TDA5920, KX-TDA0920, KX-TDA6920 Leaflet
SD Memory Card Installation/Upgrade Guide
Table of Contents
KX-TDA5920/KX-TDA0920
KX-TDA6920
Preparation............................................................................................................................... 2
Installing the SD Memory Card in a New Hybrid IP-PBX ........................................................ 5
Upgrading a Hybrid IP-PBX from a Previous Version of System Software (KX-TDA50/KX-
TDA100/KX-TDA200 only) ....................................................................................................... 8
Restoring a Hybrid IP-PBX to a Previous System Version (KX-TDA50/KX-TDA100/KX-TDA200
only)........................................................................................................................................ 15
KX-TDA5920: PSMPR Software File Version 3.0000 or later
KX-TDA0920: PMPR Software File Version 3.0000 or later
KX-TDA6920: PLMPR Software File Version 3.0000 or later
Document Version: 2006-02
SD Memory Card Installation/Upgrade Guide 1
1.1 Introduction
This leaflet provides procedures for installing the SD Memory Card for Software Upgrade in a new
Hybrid IP-PBX, and also for upgrading system software from a previous version.
The types of SD Memory Card are as follows:
SD Memory Card Supported PBX
Section 1
Preparation
Please read the information in this section before installing or
upgrading the SD Memory Card.
KX-TDA5920 KX-TDA50
KX-TDA0920 KX-TDA100/KX-TDA200
KX-TDA6920 KX-TDA600
These procedures involve transferring files between the Hybrid IP-PBX, the SD Memory Card, and a
PC running KX-TDA50 Maintenance Console (for the KX-TDA50), KX-TDA Maintenance Console (for
the KX-TDA100/KX-TDA200) or KX-TDA600 Maintenance Console (for the KX-TDA600).
At any point during a procedure, you can use the SD Card File View and Load option from
Maintenance Console's Utility menu to view the header information of files on the SD Memory Card.
This allows you to confirm that the correct versions of relevant files have been copied to the SD
Memory Card.
The procedures described in this leaflet use the following files, contained on the SD Memory Card:
File Description
DSSYS (KX-TDA5920)
DSYS (KX-TDA0920)
DLSYS (KX-TDA6920)
PSMPR (KX-TDA5920)
PMPR (KX-TDA0920)
PLMPR (KX-TDA6920)
DLNGx (x=0–2) Extension LCD language data
User-set PBX system data
Hybrid IP-PBX main software
DSIxxx (KX-TDA5920)
DIxxx (KX-TDA0920)
DLIxxx (KX-TDA6920)
2 SD Memory Card Installation/Upgrade Guide
Default value data files
File Description
1.1 Introduction
DSKEYSD (KX-TDA5920)
DKEYSD (KX-TDA0920)
DLKEYSD (KX-TDA6920)
Enhanced feature access file
IMPORTANT
• In order to avoid possible corruption of data on the SD Memory Card, please ensure
that the "SD ACCESS" LED is off before pressing the Reset Button.
• The SD Memory Card poses a choking hazard. Keep the SD Memory Card out of reach
of children.
• The SD Memory Card must be inserted in the SD Memory Card slot of the Hybrid IPPBX before start up.
• Before touching the System Initialize Switch, discharge static electricity by touching
ground or wearing an earthing strap.
1.1.1 KX-TDA5920/KX-TDA0920/KX-TDA6920 Features
The KX-TDA5920/KX-TDA0920 allow access to the following enhanced features. For details on these
features, see the Feature Manual.
• Enhanced CTI functions
• Network Direct Station Selection (NDSS)
• Automatic Call Distribution (ACD)
• Cellular Phone Features
– Call Transfer from Outside Destination
– DISA Automatic Walking COS
– Outside Destinations in Incoming Call Distribution Group
• Centralized Voice Mail
• Common extension numbering plan for two PBXs in a network
• Network ICD Group
• PS Roaming by ICD Group
SD Memory Card Installation/Upgrade Guide 3
1.2 Before Installing SD Memory Card for Software Upgrade
1.2 Before Installing SD Memory Card for Software
Upgrade
Back up the DSKEYSD/DKEYSD/DLKEYSD file
SD Memory
Card Reader
The DSKEYSD/DKEYSD/DLKEYSD file stored on the SD Memory Card contains data necessary to
use the new features. If this file is damaged, or accidentally deleted, these new features will not
function. Using an SD Memory Card Reader, back up all of the files and folders on the SD Memory
Card, including this file, to a PC. The contents of this file are different for every SD Memory Card, so
you must back up each SD Memory Card separately.
4 SD Memory Card Installation/Upgrade Guide
Section 2
Installing the SD Memory Card in a New Hybrid
IP-PBX
Before using the SD Memory Card for Software Upgrade, it is
necessary to prepare the correct system data files using a
connected PC.
2.1 Procedure
Before beginning the install procedure, make sure that power is not supplied to the Hybrid IP-PBX,
and the latest version of Maintenance Console is installed to the PC.
1. Install the SD Memory Card in the SD Memory Card slot of the PBX.
KX-TDA50
KX-TDA100/KX-TDA200
S
D
C
A
R
D
KX-TDA600
S
D
C
A
R
D
S
S
D
C
A
R
D
S
D
C
A
R
D
D
C
A
R
D
S
D
C
A
R
D
SD Memory Card Installation/Upgrade Guide 5
2.1 Procedure
Reset Button
System Initialize Switch
2. Slide the System Initialize Switch to the "SYSTEM INITIALIZE" position.
KX-TDA50
KX-TDA100/KX-TDA200
Reset Button
RESET
SYSTEM
INITIALIZE
KX-TDA600
3. Turn on the power to the PBX.
4. While the RUN indicator is flashing, slide the System Initialize Switch back to the "NORMAL"
position.
Initialization may take about 1 min to 3 min. When initialization is complete, the RUN indicator
will stop flashing and turn on.
5. Connect to the PBX using Maintenance Console.
Quick Setup will start automatically.
6. Set the data items as prompted.
Quick Setup will finish.
6 SD Memory Card Installation/Upgrade Guide
NORMAL
System Initialize Switch
Reset Button
RESET
SYSTEM
INITIALIZE
NORMAL
System Initialize Switch
Loading...