Panasonic KX-T7665 Service Manual
Digital Proprietary Telephone
Quick Reference Guide
Model No. KX-T7665
Important Information
When using the KX-T7665, keep the following conditions in mind.
• If there is any problem, unplug the extension line and connect a known working phone. If the
known working phone operates properly, have the defective phone repaired by a specified
Panasonic Factory Service Centre. If the known working phone does not operate properly,
check the KX-TDA series Business Telephone Systems and the internal extension wiring.
• Keep the unit away from heating appliances and electrical noise generating devices such as
fluorescent lamps, motors and televisions. These noise sources can interfere with the
performance of the unit.
• This unit should be kept free of dust, moisture, high temperature (more than 40 ºC) and
vibration, and should not be exposed to direct sunlight.
• Do not use benzine, thinner, or the like, or any abrasive powder to clean the cabinet. Wipe it
with a soft cloth.
• Do not use any handset other than a Panasonic handset.
• Do not disassemble this product. Dangerous electrical shock could result. The unit must only be
disassembled and repaired by qualified service technicians.
• When a failure occurs which exposes any internal parts, disconnect the telephone line cord
immediately and return this unit to service centre.
• Never attempt to insert wires, pins, etc, into the vents or other holes of this unit.
• This unit is designed to be installed under controlled conditions of ambient temperature and a
relative humidity.
• Avoid installing the unit in damp or humid environments, such as bathrooms or swimming
pools.
• 999 or 112 can be dialled on the product after accessing the CO line for the
purpose of making outgoing calls to the BT emergency (999) and (112)
services.
• This unit is designed to aid the visually handicapped to locate dial keys and
buttons.
• This unit is capable of being used in conjunction with hearing aids fitted with
inductive coil pick-ups. The handset should be held as for normal
conversations. For operation the hearing aid should be set to its "T" position
or as directed in the operating instructions for the hearing aid.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR ANY TYPE OF MOISTURE.
THE HANDSET EARPIECE IS MAGNETISED AND MAY RETAIN SMALL FERROUS
OBJECTS.
IMPORTANT NOTICE:
Under power failure conditions, this telephone may not operate. Please ensure
that a separate telephone, not dependent on local power, is available for use in an
emergency.
Note: In this manual, the suffix of each model number is omitted.
© 2003 Panasonic Communications Co., Ltd. All Rights Reserved.
Features List
(CO)
Incoming Call Distribution Group button
(ICD Group)
Confirmation Tone
C. Tone
R.B. Tone
Feature
To an extension
Calling
Redial
Quick Dialling
To store
PROGRAM
One-touch
Dialling
To dial
Operator Call
To store
Personal
Speed Dialling
System
To dial
To dial
Speed Dialling
Doorphone Call
To set
While hearing a busy tone
Automatic
Callback Busy
Call Hold
6
To answer from an idle extension
While hearing a callback ring
To hold To retrieve a call at the holding extension
HOLD
To retrieve an outside call from another extension
Off-hookOutside (CO) Line button
Ringback Tone
Making Calls
Making Calls
extension no.
REDIAL
quick dial no.
(CO)
2
assigned as a One-touch
Dialling button
0
3
0
AUTO DIAL
STORE
AUTO DIAL
STORE
system speed dial no. (3 digits)
3 1
C. Tone
R.B. Tone
During a Conversation
C. Tone
(CO)
On-hook Feature number
Direct Station Selection button
(DSS)
Operation
To an outside party
9
/
(CO)
desired no.
(max. 32 digits)
personal speed
dial no. (2 digits)
personal speed dial no. (2 digits)
doorphone no. (2 digits)
To cancel
To answer from an idle outside line
While hearing a callback ring
AUTO DIAL
STORE
desired no.
(max. 32 digits)
outside phone no.
INTERCOM
(CO)
//
C. Tone
4 6
outside
phone no.
PROGRAM
(ICD Group)
#
C. Tone
Talk
C. Tone
— 2 —
Features List
Feature Operation
During a Conversation
Call Transfer
Off-Hook Monitor
Call Park
Multiple Party
Conversation
Call Pickup
TRANSFER
C. Tone
extension no.
(CO)
To an extension
outside
phone no.
To an outside party
Useful Features
To set/cancel
To set
TRANSFER
C. Tone
To retrieve
To add other parties during a conversation
assigned as a
CONFERENCE
button
To leave a conference
assigned as a
CONFERENCE
button
During a conversation using the handset
SP-PHONE
parking zone no.
5 2
stored parking
zone no.
Talk to the
new party.
extension no.
group no. (2 digits)
(DSS)
5 2
C. Tone
C. Tone
4 1
4 0
desired
phone no.
(2 digits)
(2 digits)
Specified
Auto
C. Tone
assigned as a
CONFERENCE
button
Directed
Group
C. Tone
C. Tone
C. Tone
Talk with
multiple parties.
Sending a Call
Waiting Tone
Answering a
Call Waiting
Disregard this step if both parties are extensions.
*
While hearing a busy tone
1
Wait for an answer.
To hold the current call then talk to the new party
HOLD
(CO)
INTERCOM
/
— 3 —
*
Loading...