Panasonic KX-FC268FX, KX-FC278FX Operating Instructions

Operating Instructions
Compact Plain Paper Fax with DECT
Model No. KX-FC268FX
KX-FC278FX
KX-FC278
Please read these operating instructions before using the unit and save for future reference.
Charge the battery for about 7 hours before initial use.
service provider/telephone company is required.
Thank you for purchasing a Panasonic fax machine.
Attach your sales receipt here.
Things you should keep a record of
For your future reference
Date of purchase
Serial number (found on the rear of the unit)
Retailer’s/Dealer’s name and address
Retailer’s/Dealer’s telephone number
Note:
R The suffix in the model number will be omitted in these instructions.
Caution:
R Note that the images of copied or received documents will remain on the used ink film. Use discretion when
disposing of the used ink film.
R Do not rub or use an eraser on the printed side of the recording paper, as the print may smear.
Declaration of Conformity:
R Panasonic System Networks Co., Ltd. declares that this equipment is in compliance with the essential
requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www.doc.panasonic.de
Contact to Authorised Representative: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany
Notice for product disposal, transfer, or return:
R This product can store your private/confidential information. To protect your privacy/confidentiality, we recommend
that you erase the information such as phonebook (or caller information) from the memory before you dispose of, transfer or return the product.
Environment:
R Panasonic’s strategic direction incorporates concern for the environment into all aspects of the product life cycle,
from product development to energy saving designs; from greater product reusability to waste-conscious packaging practices.
2
ENERGY STAR:
R As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines
for energy efficiency. ENERGY STAR is a U.S. registered mark.
3

Important Information

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the unit to ensure proper and safe operation of your unit.
WARNING
Power and ground connection
R Unplug this unit from power outlets if it emits smoke,
an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorised service centre.
R Use only the power source marked on the unit. If you
are not sure of the type of power supplied to your home, consult your retailer/dealer or local power company.
R For safety purposes this unit is equipped with a
grounded plug. If you do not have this type of outlet, please have one installed. Do not ignore this safety feature by tampering with the plug.
R Do not place objects on the power cord. Install the
unit where no one can step or trip on the cord.
R Do not overload power outlets and extension cords.
This can result in the risk of fire or electric shock.
R Completely insert the AC adaptor/power plug into the
power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
R Regularly remove any dust, etc. from the AC adaptor/
power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.
R Unplug from power outlets and never touch the inside
of the product if its casing has been broken open.
R Never touch the plug with wet hands. There is a
danger of electric shock.
Installation
R Place the unit securely on a stable, level surface.
Serious damage and/or injury may result if the unit falls.
R To prevent the risk of fire or electrical shock, do not
expose this product to rain or any type of moisture.
R Use this unit in a well ventilated area. Particularly, if
you will be using the unit for extended periods of time or will be printing in large volumes, be sure to ventilate the room sufficiently.
R Do not place or use this product near automatically
controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
R Do not allow the AC adaptor or telephone line cord to
be excessively pulled, bent or placed under heavy objects.
Operating safeguards
R Unplug this unit from power outlets before cleaning.
Do not use liquid or aerosol cleaners.
R Do not cover slots and openings on the unit. They are
provided for ventilation and protection against overheating. Never place the unit near radiators, or in a place where proper ventilation is not provided.
R Never push any objects through slots in this unit. This
may result in the risk of fire or electric shock. Never spill any liquid on the unit.
R To reduce the risk of electric shock, do not
disassemble this unit. Take the unit to an authorised service centre when service is required. Opening or removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.
R Follow all warnings and instructions marked on this
unit.
R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto
the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use.
R Unplug this unit from power outlets and refer
servicing to an authorised service centre when any of the following conditions occur: – If the power cord is damaged or frayed.
– If the unit has been exposed to rain or water, or
liquid has been spilled into the unit. Do not use a microwave oven to speed up the drying process of any parts of the unit (including the cordless handset) to avoid permanent damage.
– If the unit does not work normally by following the
operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorised service centre.
– If the unit has been dropped or physically
damaged.
– If the unit exhibits a distinct change in
performance.
Medical
R Consult the manufacturer of any personal medical
devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of 1.88 GHz to 1.90 GHz, and the RF transmission power is 250 mW (max.).)
R Do not use the product in health care facilities if any
regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
4
Important Information
CAUTION
Installation and relocation
R After moving the unit from cold areas to warmer
areas, wait approximately 30 minutes before connecting the unit to allow the unit to adjust to the ambient temperature. If the unit is connected too soon after a sudden climate change, condensation may form inside the unit, causing malfunction.
R Never turn the unit upside down or sideways when
moving it.
R Never install telephone wiring during a lightning
storm.
R Never install telephone jacks in wet locations unless
the jack is specifically designed for wet locations.
R Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the network interface.
R Use caution when installing or modifying telephone
lines.
R The AC adaptor is used as the main disconnect
device. Ensure that the AC outlet is installed near the unit and is easily accessible.
R This unit is unable to make calls when:
– the cordless handset batteries need recharging
or have failed. – there is a power failure. – the key lock feature is turned ON.
R Do not position the unit in a location where it is
unstable or subject to vibrations.
LED light
CLASS 1 LED PRODUCT
R When using the unit, do not look directly at the CIS’s
LED light. Direct eye exposure can cause eye damage.
CIS’s LED light properties
LED radiation output : Max. 1 mW Wavelength : Yellowish Green 570 nm typical Emission duration : Continuous
Battery
R Do not mix old and new batteries. R Do not open or mutilate the battery(ies). Released
electrolyte from the battery(ies) is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
R Exercise care when handling the battery(ies). Do not
allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or the conductive material to overheat and cause burns.
R Charge the battery(ies) provided with or identified for
use with this product only in accordance with the
instructions and limitations specified in these operating instructions.
R Only use the compatible charger to charge the
battery(ies). Do not tamper with the charger. Failure to follow these instructions may cause the battery(ies) to swell or explode.

Important safety instructions

When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury.
1. Do not use this unit near water, for example near a bathtub, wash bowl, kitchen sink, etc.
2. During thunderstorms, avoid using telephones except cordless types. There may be a remote risk of an electric shock from lightning.
3. Do not use the telephone of this unit (if so equipped) to report a gas leak, when in the vicinity of the leak.
4. Use only the power cord and batteries indicated in these operating instructions.
5. Do not dispose of the battery(ies) in a fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS

For best performance

Location
R To avoid malfunction, do not position the unit near
appliances such as TVs or speakers which generate an intense magnetic field.
Static electricity
R To prevent static electricity damage to the interface
connectors or other electrical components inside the unit, touch a grounded metal surface before touching the components.
Location and noise
The base unit and other compatible Panasonic units use radio waves to communicate with each other. R For maximum coverage and noise-free
communications, place your base unit: – at a convenient, high, and central location with no
obstructions between the cordless handset and base unit in an indoor environment.
– away from electronic appliances such as TVs,
radios, personal computers, wireless devices, or other phones.
– facing away from radio frequency transmitters,
such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.)
5
A
B
C
Important Information
R Coverage and voice quality depends on the local
environmental conditions.
R If the reception for a base unit location is not
satisfactory, move the base unit to another location for better reception.
Environment
R Keep the unit away from electrical noise generating
devices, such as fluorescent lamps and motors.
R The unit should be kept free from dust, high
temperature and vibration.
R The unit should not be exposed to direct sunlight. R Do not place heavy objects on top of the unit. R When you leave the unit unused for a long period of
time, unplug this unit from the power outlet.
R The unit should be kept away from heat sources such
as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 5 °C (base unit)/0 °C (cordless handset, charger unit) or greater than 35 °C (base unit)/40 °C (cordless handset, charger unit). Damp basements should also be avoided.
R The maximum calling distance may be shortened
when the unit is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc.
Routine care
R Wipe the outer surface of the unit with a soft cloth. Do
not use benzine, thinner, or any abrasive powder.

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols (A, B, C) on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
These symbols (A, B, C) are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol
This symbol (B) might be used in combination with a chemical symbol (C). In this case it complies with the requirement set by the Directive for the chemical involved.

Illegal copies

R It is unlawful to make copies of certain
documents.
Copying certain documents may be illegal in your country. Penalties of fines and/or imprisonment may be imposed on those found guilty. The following are examples of items that may be illegal to copy in your country. – Currency
– Bank notes and checks – Bank and government bonds and securities – Passports and identification cards – Copyright material or trademarks without the
consent of the owner
– Postage stamps and other negotiable
instruments
This list is not inclusive and no liability is assumed for either its completeness or accuracy. In case of doubt, contact your legal counsel.
Notice:
R Install your machine near a supervised area to
prevent illegal copies from being made.
6

Table of Contents

1. Introduction and Installation
Accessories
1.1 Included accessories .....................................9
1.2 Accessory information ...................................9
Finding the Controls
1.3 Button descriptions of the base unit ..............9
1.4 Button descriptions of the cordless
handset .......................................................10
1.5 Display descriptions of the cordless
handset .......................................................10
1.6 Overview .....................................................11
Installation
1.7 Ink film .........................................................12
1.8 Paper tray ....................................................14
1.9 Recording paper ..........................................14
1.10 Handset cord (KX-FC278 only) ...................15
1.11 Battery installation / replacement ................15
2. Preparation
Connections and Setup
2.1 Connections ................................................17
2.2 Battery charge .............................................18
2.3 Turning the cordless handset power ON/
OFF .............................................................18
2.4 Dialling mode ..............................................18
Volume
2.5 Adjusting cordless handset volume .............19
2.6 Adjusting base unit volume .........................19
Initial Programming
2.7 Date and time ..............................................19
2.8 Your logo .....................................................20
2.9 Your fax number ..........................................20
3. Telephone
Making and Answering Calls
3.1 Making phone calls .....................................21
3.2 Answering phone calls ................................21
Automatic Dialling
3.3 Cordless handset phonebook .....................22
3.4 Chain dial (Cordless handset only) .............22
3.5 Base unit phonebook ..................................23
3.6 One touch dial (Base unit only) ...................23
Caller ID
3.7 Caller ID service ..........................................24
3.8 Viewing and calling back .............................24
3.9 Editing a caller’s telephone number before
calling back .................................................25
3.10 Erasing caller information ............................25
3.11 Storing caller information into the
phonebook ..................................................26
4. Fax
Sending Faxes
4.1 Sending a fax manually ...............................27
4.2 Document requirements ..............................27
4.3 Sending a fax using the phonebook and one
touch dial .....................................................28
4.4 Broadcast transmission ...............................28
Receiving Faxes
4.5 Selecting the way to use your fax
machine .......................................................29
4.6 Receiving a fax manually – Auto answer
OFF .............................................................30
4.7 Receiving a fax automatically – Auto answer
ON ...............................................................31
4.8 Receive polling (retrieving a fax placed on
another fax machine) ..................................32
4.9 Junk fax prohibitor (preventing fax reception
from undesired callers) ................................32
5. Copy
Copying
5.1 Making a copy .............................................34
6. Answering Machine
Greeting
6.1 Recording your greeting message ..............35
Incoming Messages
6.2 Listening to recorded messages .................35
Memo Message
6.3 Leaving a message for others or
yourself ........................................................36
Remote Operation
6.4 Using the answering machine with the cordless
handset .......................................................36
6.5 Operating from a remote location ................37
7. Programmable Features
Base Unit
7.1 Base unit programming ...............................39
Cordless Handset
7.2 Cordless handset programming ..................44
8. Multi-unit Operation
Additional Units
8.1 Operating additional units ...........................47
8.2 Registering a cordless handset to a base
unit ..............................................................47
Other Features
8.3 Intercom ......................................................47
8.4 Transferring a call/conference .....................48
8.5 Copying phonebook items ...........................49
9. Useful Information
Useful Information
9.1 Character entry ...........................................50
10. Help
Reports and Displays
10.1 Report messages ........................................52
10.2 Display messages .......................................52
Troubleshooting
10.3 When a function does not work ...................54
7
Table of Contents
11. Maintenance
Jams
11.1 Recording paper jams .................................61
11.2 Document jams ...........................................62
Cleaning
11.3 Document feeder/recording paper feeder/
scanner glass cleaning ................................62
11.4 Thermal head cleaning ................................63
12. General Information
Printed Reports
12.1 Reference lists and reports (Base unit
only) ............................................................65
Specifications
12.2 Specifications ..............................................65
13. Index
13.1 Index............................................................67
8

1.1 Included accessories

A
B
AGHIJKFEDCB
L
M
N
Q
O
P
S
U
T
R
1. . Introduction and Installation
A Telephone line cord B
C
Handset cord
E Starter ink film
(10 metres long)
*1
Handset
D Paper tray
A Paper support B Paper tray
F Cordless handset
*1
1. Introduction and Installation
´ 2 rolls (Each roll will print about 90 A4-sized
30 m pages.)
Rechargeable batteries
Model No. (Part No.): P03P or HHR-4MRE
2 rechargeable nickel metal hydride (Ni-MH) batteries, AAA (R03) size
Additional digital cordless handset
Model No. (Part No.): KX-TGA641FX
– DECT repeater
Model No. (Part No.): KX-A272
*1
To ensure the unit operates properly, we recommend using the Panasonic replacement film. The ink film is not reusable. Do not
rewind and use the ink film again.
*2
Replacement batteries may have a different capacity from that of the supplied batteries.
*2

1.3 Button descriptions of the base unit

G Rechargeable
batteries
I
Charger
*1 KX-FC278 only *2 Part numbers are subject to change without notice.
Note:
R Save the original carton and packing materials for
future shipping and transportation of the unit.
R After unpacking the product, take care of the packing
materials and/or power plug cap appropriately.
*1
H AC adaptor
(PQLV219CE)
J Operating
instructions

1.2 Accessory information

Additional/replacement accessories
– Replacement film
Model No. (Part No.): KX-FA52X
*1
*1*2
MMICN (Microphone) R The built-in microphone. MGREETING RECN R To record a greeting message (page 35). MGREETING CHECKN R To check a greeting message (page 35). MMEMON R To record a memo message (page 36). MERASEN R To erase messages (page 35, 35). MAUTO ANSWERN R To turn the auto answer setting ON/OFF
(page 30, 31).
MPLAYBACKN R To play messages (page 35). MREDIALN/MPAUSEN R To redial the last number dialled. If the line is busy
when you make a phone call using the MSP-PHONEN button, or when you send a fax, the unit will automatically redial the number 2 or more times.
9
A B
C
D
E F
1. Introduction and Installation
R To insert a pause during dialling. MRN R To access special telephone services or for
transferring extension calls.
R The recall/flash time can be changed (feature #72
on page 43).
MCALLER IDN R To use Caller ID features (page 25). MSTOPN R To stop an operation or programming session.
R To erase a character/number (page 50). MLOCATORN/MINTERCOMN R To make/answer intercom calls (page 47).
R To page or locate a cordless handset
(page 48).
MPRINT REPORTN R To print lists and reports for reference purposes
(page 65).
MMENUN R To start or exit programming. Navigator/MPHONEBOOKN/MVOLUMEN R To search for a stored item (page 23, 28).
R To select features or feature settings during
programming (page 39).
R To adjust the volume (page 19). R To open a phonebook.
MSETN R To store a setting during programming. MTONEN R To change from pulse to tone temporarily during
dialling when your line has rotary pulse service.
MMUTEN R To mute your voice during a conversation. Press
again to resume the conversation.
MSP-PHONEN R For speakerphone operation. MFAX STARTN R To send or receive a fax. MCOPYN R To copy a document (page 34).

1.4 Button descriptions of the cordless handset

Soft keys
R To select the features or operations displayed
directly above each key (page 11).
M N (Talk) R To make/answer calls (page 21, 21). M N (Speakerphone) R For speakerphone operation. M N (Off/Power) R To turn power ON/OFF (page 18).
R To hang up (page 21, 21). R To stop an operation or programming.
Navigator
R To adjust the receiver or speaker volume (up or
down) while talking (page 19).
R To scroll through (up or down) various lists or
items (page 22).
R To move the cursor (left or right) to edit number
or name.
M N (Recall) R To access special telephone services or for
transferring extension calls.
R The recall/flash time can be changed (feature #72
on page 43).
R To set the alarm feature (page 46).

1.5 Display descriptions of the cordless handset

10
Display items
Display item
Meaning
Within range of a base unit R When flashing: Cordless handset
is searching for base unit. (page 57)
Paging, intercom mode.
HI J K
L
M
N
A
B
C
D
EF
G
1. Introduction and Installation
Display item
Meaning
Cordless handset is on an outside call.
Missed call*1 (page 24)
When displayed next to the battery icon: Auto answer setting is ON. (page 31) R When feature #10 is set to
GREETING ONLY, will be displayed.
When displayed with a number: New messages have been recorded. (page 36)
Answering machine answers calls with a greeting message and caller messages are not recorded. (page 37)
Battery level
Alarm is ON. (page 46)
Ringer volume is OFF. (page 19)
New voice mail message received.
R Someone is using the line. R Answering machine is being used
by another cordless handset.
*2
Soft key icon
Symbols used in these operating instructions
Symbol Meaning
“ ” Select the words in quotations shown
Action
Stop recording or playback.
Insert a dialling pause.
Erase the selected item.
Allow you to make an intercom call.
Switch the screen. (page 24)
Erase a number/character.
Put the call on mute.
on the display (e.g., Time
Settings) by pressing MDN or MCN

1.6 Overview

1.6.1 Base unit
*1 Caller ID subscribers only *2 Voice mail subscribers only
Soft keys
The cordless handset features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display.
Soft key icons
Soft key icon
Action
Return to the previous screen.
Display the menu.
Accept the current selection.
Display a previously dialled telephone number.
Open the cordless handset phonebook.
Display the character entry mode for phonebook search. (page 22)
Turn the key lock feature OFF. (page 21)
Select a character entry mode.
* The pictured model is KX-FC278.
Document guides
A B Paper tray C Metal recording paper guide D Paper support E Recording paper exit F Recording paper entrance G Antenna H Microphone I Front cover J Document entrance
11
E
B
A
D
C
A
1. Introduction and Installation
K Document exit L Speaker M Green button (Back cover release button) N Back cover
Removing the shipping tape
* The pictured model is KX-FC278.
Note:
R Shipping tape positions are subject to change without
notice.

1.7 Ink film

The included film roll is a starter ink film.
1 Open the front cover.
2
Release the back cover by pushing the green button (A).
1.6.2 Cordless handset
Charge indicator
A
Ringer indicator
B Speaker C Receiver D Microphone E Charge contacts
3 Open the back cover.
4 Insert the blue gear of the ink film roll into the front
left slot of the unit (B) and the white gear of the ink film roll into the rear left slot of the unit (C). R The ink film is safe to touch and will not rub off on
your hands like carbon paper.
12
C
B
D
E
F
Tight
1 turn
No ink film is wrapped around the blue core.
Slack/Crease
Reverse
G
1. Introduction and Installation
R Make sure the blue gear (B) and white gear (C)
are installed as shown.
5 Turn the blue gear (D) in the direction of the arrow
until the ink film is tight (E) and at least one layer of ink film is wrapped around the blue core (F).
Correct
Incorrect
6 Close the back cover securely by pushing down on
the dotted area at both ends (G).
7 Close the front cover securely.
13
B
A
1. Introduction and Installation

1.8 Paper tray

Pull up the metal recording paper guide (A), then install the paper tray (B).
R Make sure the arrows on the paper tray and the unit
match.
– Paper with a cotton and/or fibre content that is
over 20 %, such as letterhead paper or paper used for resumes
– Extremely smooth or shiny paper, or paper that is
highly textured – Coated, damaged or wrinkled paper – Paper with foreign objects attached, such as tabs
or staples – Paper which has dust, lint or oil stains – Paper that will melt, vaporize, discolour, scorch
or emit dangerous fumes near 200 °C, such as
vellum paper. These materials may transfer onto
the fusing roller and cause damage. – Moist paper
R Some paper only accepts print on one side. Try using
the other side of the paper if you are not happy with the print quality or if misfeeding occurs.
R For proper paper feeding and best print quality, we
recommend using long-grained paper.
R Do not use paper of different types or thickness at the
same time. This may cause a paper jam.
R Avoid double-sided printing. R Do not use paper printed from this unit for
double-sided printing with other copiers or printers. This may cause a paper jam.
R To avoid curling, do not open paper packs until you
are ready to use the paper. Store unused paper in the original packaging, in a cool and dry location.
R For customers who live in high humidity areas:
Please be sure to store paper in an air-conditioned room at all times. If you print using moist paper, it may cause paper jam.
1. Fan the paper to prevent paper jams.
R If the paper support is folded, unfold it.

1.9 Recording paper

The unit can hold up to 20 sheets of 64 g/m2 to 80 g/ m2 paper.
Note for recording paper:
R Do not use the following types of paper:
14
2. Insert the paper gently, print-side down (A).
A
A
R Do not force the paper into the paper tray.
R If the paper is not inserted correctly, remove all of
the installed paper, and re-install it gently. Otherwise the paper may jam.
Correct
Slant
1. Introduction and Installation

1.10 Handset cord (KX-FC278 only)

Connect the handset cord (A).

1.11 Battery installation / replacement

Important: R USE ONLY Ni-MH batteries AAA (R03) size.
Do NOT use alkaline/Manganese/Ni-Cd batteries etc.
Note:
R Remove all of the installed paper before adding
paper.
R Use the supplied rechargeable batteries. For
replacement, we recommend using the Panasonic rechargeable batteries noted on page 5, 9.
R Wipe the battery ends ( R Avoid touching the battery ends (
contacts.
R Confirm correct polarities ( , ). R Install the batteries without touching the battery
ends (
, ) or the unit contacts.
, ) with a dry cloth.
, ) or the unit
15
1. Introduction and Installation
1 Press the notch on the cordless handset cover firmly,
and slide the cover. R When replacing batteries, remove the old
batteries positive (
) terminal first.
2 Insert the batteries negative ( ) terminal first. Close
the cordless handset cover.
R When the language selection is displayed, see
page 46.
16

2.1 Connections

B
A
C
25 mm
C
A
B
2 mm
*1
2. . Preparation
Important: R The unit will not work during a power failure. We
recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack, if you have such a telephone jack in your house.
2.1.1 Base unit
A
Telephone line cord R Connect to a single telephone line jack.
B Power cord
R Connect to a power outlet (220 V – 240 V,
50/60 Hz).
2. Preparation
If you use the unit with a computer and your internet
R
provider instructs you to install a filter (C), please connect it as follows.
2.1.2 Charger unit (KX-FC278 only)
A
AC adaptor R Connect to a power outlet (220 V – 240 V,
50/60 Hz).
B Hooks
R Fasten the AC adaptor cord to prevent it from
being disconnected.
C Screws (not included)
R The charger can be mounted on the wall, if
required.
Caution: R When you operate this product, the power outlet
should be near the product and easily accessible.
R Be sure to use the telephone line cord included
in this unit.
R Do not extend the telephone line cord.
Note:
R If any other device is connected to the same
telephone line, this unit may disturb the network condition of the device.
*1 Use screws longer than 20 mm.
Caution: R USE ONLY WITH the supplied Panasonic AC
adaptor.
R The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.
17
A
D
B
B
C
A
2. Preparation
R Press the AC adaptor plug firmly.

2.2 Battery charge

Place the cordless handset on the base unit or charger for about 7 hours before initial use. Confirm Charging is displayed.
When the batteries are fully charged, the charge indicator (A) goes OFF.
KX-FC278
cloth once a month. Clean more often if the unit is exposed to grease, dust, or high humidity.
Battery level
Icon Battery level
High
Medium
Low
Needs charging.
Panasonic Ni-MH battery performance (included batteries)
Operation Operating time
In continuous use 18 hours max.
Not in use (standby) 170 hours max.
Note:
R It is normal for batteries not to reach full capacity at
the initial charge. Maximum battery performance is reached after a few complete cycles of charge/ discharge (use).
R Actual battery performance depends on a
combination of how often the cordless handset is in use and how often it is not in use (standby).
R Even after the cordless handset is fully charged, the
cordless handset can be left on the base unit or charger without any ill effect on the batteries.
R The battery level may not be displayed correctly after
you replace the batteries. In this case, place the cordless handset on the base unit or charger and let it charge for at least 7 hours.
KX-FC268
Note:
R It is normal for the cordless handset to feel warm
during charging.
R Clean the charge contacts of the cordless handset
(B), base unit (C) or charger (D) with a soft and dry
18

2.3 Turning the cordless handset power ON/OFF

Power ON
Press M N for about 1 second.
Power OFF
Press M N for about 2 seconds.

2.4 Dialling mode

If you cannot dial (page 21, 27), change this setting according to your telephone line service.
With the base unit
1 MMENUN 2 Press MBNM1NM3N to display “DIAL MODE”. 3 Press M1N or M2N to select the desired setting.
M1N PULSE: For rotary/pulse dial service. M2N TONE (default): For tone dial service.
4 MSETN
2. Preparation
5 Press MMENUN to exit.

2.5 Adjusting cordless handset volume

Ringer volume
1.
2. Press MDN or MCN to select Handset Setup”. A
3. Press MDN or MCN to select Ringer Setup”. A
4. Press MDN or MCN to select Ringer Volume”. A
5. Press MDN or MCN to select the desired volume. A
A M N
Note:
R When receiving a call, you can adjust the ringer
volume by pressing MDN or MCN.
R When the ringer volume is turned OFF, is displayed
and the cordless handset does not ring for outside calls. However even when the ringer volume is set to OFF, the cordless handset rings: – at the low level for alarm (page 46) and intercom
calls (page 47)
– at the high level for paging (page 48)
Cordless handset receiver volume While using the receiver, press MDN or MCN.
Speaker volume While using the speakerphone, press MDN or MCN.

2.7 Date and time

The date and time can be set using either the cordless handset or the base unit. R The other party’s fax machine will print the date and
time on the top of each page you send according to your unit’s date and time setting.
R If a power failure occurs, the date and time setting
may be lost. If the correct date and time is not displayed after the power has been restored, set the date and time again.
2.7.1 With the cordless handset
1 2 Handset SetupA 3 Time SettingsA 4 Set Date/TimeA 5 Enter the current date, month, and year. A
Example: 3 August, 2010 M0NM3N M0NM8N M1NM0N
6 Enter the current hour and minute.
Example: 10:15 (12 hour clock format)
M1NM0N M1NM5N R You can select 24-hour or 12-hour clock format
(“AM” or “PM”) by pressing MGN.
7
To correct a mistake
Press MDN or MCN to move the cursor to the incorrect number, and make the correction.
2.7.2 With the base unit
A M N

2.6 Adjusting base unit volume

Ringer volume While the unit is idle, press MJN or MKN.
R The ringer volume can only be adjusted if there are
no documents in the document feeder entrance.
To turn the ringer OFF
Press MKN repeatedly to display RINGER OFF= OK?. A MSETN R The base unit will not ring for outside calls.
The base unit will ring at the low level for intercom calls.
R To turn the ringer back ON, press MJN.
Handset receiver volume (KX-FC278 only) While using the receiver, press MJN or MKN.
Speaker volume While using the speakerphone, press MJN or MKN.
Important: R If is displayed on the base unit, either the date
and time has not been set or the setting has been lost (due to a power failure, etc.). Set the date and time by pressing MSETN, then follow step 2 to 4.
1 MMENUN A MBNM0NM1N A MSETN 2 Enter the current date/month/year by selecting 2
digits for each.
Example: 3 August, 2010 M0NM3N M0NM8N M1NM0N
3 Enter the current hour/minute by selecting 2 digits for
each.
Example: 10:15 PM (12 hour clock format)
1. M1NM0N M1NM5N
2. Press MGN repeatedly to select PM”.
Press MGN repeatedly to select AM or PM, or 24-hour time entry.
4 MSETN 5 Press MMENUN to exit.
19
2. Preparation
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect number, and make the correction.
If you have subscribed to a Caller ID service
The date and time will be automatically set according to the received caller information. R To use this feature, make sure the time adjustment
is set to AUTO (feature #33 on page 41).
R If the time has not previously been set, Caller ID will
not adjust the clock.

2.8 Your logo

You can program your logo (name, company name, etc.) so that it appears on the top of each page sent.
With the base unit
1 MMENUN A MBNM0NM2N A MSETN 2 Enter your logo, up to 30 characters (see page 50
for character entry).
R To enter a hyphen, press MRN. R To enter a space, press MMUTEN.
3 MSETN 4 Press MMENUN to exit.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect character, and make the correction.
R To erase all of the characters, press and hold
MSTOPN.

2.9 Your fax number

You can program your fax number so that it appears on the top of each page sent.
With the base unit
1 MMENUN A MBNM0NM3N A MSETN 2 Enter your fax number, up to 20 digits.
R To enter a “+”, press MGN. R To enter a space, press MBN. R To enter a hyphen, press MRN. R To erase a number, press MSTOPN.
3 MSETN 4 Press MMENUN to exit.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect number, and make the correction.
R To erase all of the numbers, press and hold
MSTOPN.
20
3. Telephone

3.1 Making phone calls

3. . Telephone
3.1.1 With the cordless handset
1 Lift the cordless handset and dial the telephone
number. R To correct a digit, press .
2 M
N
R To make hands-free telephone calls, press M N.
3 To hang up, press M N or place the cordless
handset on the base unit or charger.
Note:
R While talking using M
hands-free telephone conversation by pressing M To switch back, press M N.
R For best performance, use the speakerphone in a
quiet environment.
To mute your conversation
While mute is turned ON, you can hear the other party, but the other party cannot hear you.
1. Press during conversation.
R flashes.
2. To return to the conversation, press again.
To redial using the redial list (Memory redial)
The last 10 telephone numbers dialled from the cordless handset are stored in the redial list (each 24 digits max.).
1.
2. Press MDN or MCN to select the desired number.
3. M N or M N
To erase numbers in the redial list
1.
2. Press MDN or MCN repeatedly to select the desired
number. A
3. “Yes A A M N
N, you can switch to a
A
Example:
“0” when making outside calls with a PBX:
1. M0N A
2. Dial the telephone number. A M N
Note:
R A 3 second pause is inserted each time
If you need to dial the line access number
pressed. Repeat as needed to create longer pauses.
3.1.2 With the base unit
KX-FC278:
1 Lift the handset or press MSP-PHONEN. 2 Dial the telephone number. 3 To hang up, replace the handset or press
N.
MSP-PHONEN.
KX-FC268:
1 MSP-PHONEN 2 Dial the telephone number. 3 To hang up, press MSP-PHONEN.
To redial the last number dialled from the base unit
KX-FC278: Lift the handset or press MSP-PHONEN. A MREDIALN
KX-FC268:
MSP-PHONEN A MREDIALN
R If MSP-PHONEN is pressed and the line is busy, the
unit will automatically redial the number 2 or more times.
To mute your conversation
When the call is muted, you will be able to hear the other party but the other party will not be able to hear you.
Press MMUTEN. R To release the mute, press MMUTEN.
is
Key lock
The cordless handset can be locked so that no calls or settings can be made. Incoming calls can be answered, but all other functions are disabled while key lock is ON. To turn key lock ON, press
R is displayed. R To turn key lock OFF, press
Note:
R Calls to emergency numbers cannot be made until
key lock is turned OFF.
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 23).
for about 3 seconds.
for about 3 seconds.

3.2 Answering phone calls

3.2.1 With the cordless handset
When a call is being received, the ringer indicator on the cordless handset flashes.
1 Lift the cordless handset and press M
the cordless handset rings. R You can also answer the call by pressing any dial
key from M0N to M9N, MGN or MBN (Any key talk
feature).
2 To hang up, press M
handset on the base unit or charger.
N or place the cordless
N or M N when
21
3. Telephone
Auto talk feature (Cordless handset)
You can answer calls simply by lifting the cordless handset off the base unit or charger. You do not need to press M N. To turn this feature ON, see page 45.
3.2.2 With the base unit
KX-FC278:
1 Lift the handset or press MSP-PHONEN and talk into
MMICN.
2 To hang up, replace the handset or press
MSP-PHONEN.
KX-FC268:
1 Press MSP-PHONEN and talk into MMICN. 2 To hang up, press MSP-PHONEN.

3.3 Cordless handset phonebook

You can store 100 items to the cordless handset phonebook. When the system has additional cordless handsets (page 47), each cordless handset can have its own phonebook. R The base unit has its own individual phonebook
(page 23).
R You can copy phonebook items between the base
unit and the cordless handset, or between 2 cordless handsets (page 49).
3.3.1 Storing phonebook items
1
A
2 New EntryA 3 Enter the name, up to 16 characters (see page 50
for character entry). A R You can change the character entry mode by
pressing (page 50).
4 Enter the telephone number, up to 24 digits. A
2 times
R To add other entries, repeat from step 3.
5 M N
3.3.2 Making a phone call using the phonebook
1 2 Press MDN or MCN repeatedly to display the desired
item. R You can scroll through the phonebook item by
pressing and holding MCN or MDN.
3 M N
To search for a name by initial
1.
R Change the character entry mode if necessary:
A Press MCN or MDN to select the character
entry mode. A
2. Press the dial key (M0N to M9N) which contains the
character you are searching for (page 50). R Press the same dial key repeatedly to display the
first item corresponding to each character located
on that dial key. R If there is no item corresponding to the character
you selected, the next item is displayed.
3. Press MDN or MCN repeatedly to scroll through the
phonebook if necessary.
3.3.3 Editing a stored item
Changing a name, telephone number
1. Find the desired item (page 22). A
2. “EditA
3. Edit the name if necessary. For further details, see
the storing procedure on page 22. A
4. Edit the telephone number if necessary. For further
details, see the storing procedure on page 22. A
2 times
5. M
N
3.3.4 Erasing a stored item
To erase a specific item
1. Find the desired item (page 22). A
2. “EraseA
3. “YesA A M N
To erase all items
1. A
2. “Erase AllA
3. “YesA
4. “YesA A M N

3.4 Chain dial (Cordless handset only)

This feature allows you to dial telephone numbers in the cordless handset phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the cordless handset phonebook, without having to dial manually.
1 During an outside call, press 2 Press MDN or MCN repeatedly to select the desired
item. R To search by first character (index search), see
page 22.
. A
22
Loading...
+ 50 hidden pages