Panasonic KM7KX FPG175 Users Manual

Please read these Operating
Instructions before using the unit
and save for future reference.

2.4GHz Cordless Phone with Fax

Operating Instructions

Model No. KX-FPG175

2

For your future reference

Date of purchase Serial number

(found on the rear of the unit)

Dealer’s name and address

Dealer’s telephone number

Caution:

●

The Telephone Protection Act of 1991 requires the following information to be clearly stated
either at the top or bottom margin of the first message page when transmitting messages via
telephone facsimile:
— date and time of transmission,
— identification of the business, entity or person(s) sending the facsimile, and
— telephone number of the business, entity or person(s).
To program this information into your unit, complete all the instructions on pages 7 to 9.

●

Note that the images of copied or received documents will remain on the used ink film. Use
discretion when disposing of the used ink film.

●

Do not rub or use an eraser on the printed side of recording paper, as the print may smear.

3

Important safety instructions!

When using this unit, basic safety precautions
should always be followed to reduce the risk of
fire, electric shock, or personal injury.

1. Read and understand all instructions.

2. Follow all warnings and instructions marked
on this unit.

3. Unplug this unit from power outlets before
cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.

4. Do not use this unit near water, for example
near a bath tub, wash bowl, kitchen sink, or
the like.

5. Place the unit securely on a stable surface.
Serious damage and/or injury may result if
the unit falls.

6. Do not cover slots and openings on the
unit. They are provided for ventilation and
protection against overheating. Never place
the unit near radiators, or in a place where
proper ventilation is not provided.

7. Use only the power source marked on the
unit. If you are not sure of the type of power
supplied to your home, consult your dealer
or local power company.

8. For safety purposes this unit is equipped
with a three prong grounded plug. If you do
not have this type of outlet, please have
one installed. Do not use any type of
adaptor plug to defeat this safety feature.

9. Do not place objects on the power cord.
Install the unit where no one can step or trip
on the cord.

10. Do not overload wall outlets and extension
cords. This can result in the risk of fire or
electric shock.

11. Never push any objects through slots in this
unit. This may result in the risk of fire or
electric shock. Never spill any liquid on the
unit.

12. To reduce the risk of electric shock, do not
disassemble this unit. Take the unit to an
authorized service center when service is
required. Opening or removing covers may
expose you to dangerous voltages or other
risks. Incorrect reassembly can cause
electric shock when the unit is subsequently
used.

13. Unplug this unit from the wall outlet and
refer servicing to an authorized service
center when the following conditions occur:

A. When the power supply cord or plug is

damaged or frayed.
B. If liquid has been spilled into the unit.
C.If the unit has been exposed to rain or

water.
D.If the unit does not work normally by

following the operating instructions.

Adjust only controls covered by the

operating instructions. Improper

adjustment may require extensive work

by an authorized service center.
E. If the unit has been dropped or

physically damaged.
F. If the unit exhibits a distinct change in

performance.

14. During thunderstorms, avoid using
telephones except cordless types. There
may be a remote risk of an electric shock
from lightning.

15. Do not use this unit to report a gas leak,
when in the vicinity of the leak.

SAVE THESE INSTRUCTIONS

4

CAUTION:

To reduce the risk of fire or injury to persons,
read and follow these instructions.

1. Use only the battery(ies) specified.

2. Do not dispose of the battery(ies) in a fire.
They may explode. Check with local waste
management codes for special disposal
instructions.

3. Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and may
cause burns or injury to the eyes or skin.
The electrolyte may be toxic if swallowed.

4. Exercise care in handling batteries in order
not to short the battery to conductive
materials such as rings, bracelets, and keys.
The battery and/or conductor may overheat
and cause burns.

5. Charge the battery(ies) provided with or
identified for use with this product only in
accordance with the instructions and
limitations specified in this manual.

INSTALLATION:

●

Never install telephone wiring during a
lightning storm.

●

Never install telephone jacks in wet locations
unless the jack is specifically designed for wet
locations.

●

Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.

●

Use caution when installing or modifying
telephone lines.

WARNING:

●

To prevent the risk of fire or electrical shock,
do not expose this product to rain or any type
of moisture.

OTHER INFORMATION:

●

Keep the unit away from electrical noise
generating devices, such as fluorescent
lamps and motors.

●

The unit should be kept free from dust, high
temperature and vibration.

●

The unit should not be exposed to direct
sunlight.

●

Do not place heavy objects on top of this unit.

●

Do not touch the plug with wet hands.

Note:

●

Operating near 2.4GHz electrical appliances
may cause interference. Move away from the
electrical appliances and/or press the CH
(Channel) button.

●

Consult the manufacturer of any personal
medical devices, such as pacemakers, to
determine if they are adequately shielded from
external RF (radio frequency) energy. (The unit
operates in the frequency range of 2401MHz to
2472MHz, and the power output level can range
from 0.001 watts to 0.20 watts.) Do not use the
unit in health care facilities if any regulations
posted in the area instruct you not to do so.
Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
(radio frequency) energy.

5

Ink film – installing!

1

Open the front cover by pulling up the center part.

●

If the handset is on the cradle, take it off before opening the cover.

2

Push the back cover open button (green) on the right side of the unit.
OR
Push the back cover open lever (green) inside of the unit.

3

Open the back cover.

5

If the ink film is slack, tighten it by turning the gear.

6

Close the back cover securely by pushing down on the dotted area at both ends.
Close the front cover securely.

4

Insert the blue core of the front ink film roll into the right slot of the unit. Insert the “T”
shaped gear (blue) into the left slot of the unit.

Insert the rear ink film roll.