Panasonic HC-X929, HC-X920M, HC-V720M, HC-V720, HC-V727 User Manual
...
Wi-Fi connection guide
ENGLISH
A [Delete]
B [EXIT]
A [Delete]
B [EXIT]
High Definition Video Camera
This unit cannot be used to connect to a public wireless LAN
connection.
Step.1
Install the “Image App”
Step.3
When connecting to a wireless
access point (wireless LAN router)
Connect to Wi-Fi
The setting screen for the wireless access point is displayed when the Wi-Fi button is pressed for the first time.
When connecting to a smartphone
Model No. HC-X920/HC-X929/HC-X920M
Step.2
Confirm the Wi-Fi® connecting method
HC-V720/HC-V727/HC-V720M
Connect to Wi-Fi
HC-V520/HC-V520M
VQC9469
To use the Wi-Fi® function, it is required to connect this unit to a wireless access point or smartphone via Wi-Fi.
≥ This guide explains with Wi-Fi connection that allows using the [Remote Ctrl].
A [Remote Ctrl]
B [DLNA Play]
C [Live Cast]
D [Wi-Fi Setup]
E [Hom.Monitor]
Step.3
≥ Please refer to the operating instructions (PDF format) of this unit for
details about the setting/operating of this unit.
≥ Please refer to the operating instructions of the device in use for
details about the setting/operating of the wireless access point or
smartphone.
Install the “Image App”
Step.1
To connect this unit with the smartphone, it is required to install “Image App” in the smartphone to be used.
1 [Android™]: Select “Google Play™ Store”.
[iOS]: Select “App Store
An environment that can connect to the network is required.
2 Enter “Image App” into the search box.
SM
”.
3 Select “Image App” and install it.
Confirm the Wi-Fi® connecting method
Step.2
Confirm the wireless access point and smartphone used.
When connecting to a wireless
access point (wireless LAN router)
1 Check if the wireless access point is compatible with
IEEE802.11b/g/n.
≥ Proceed to 2 once the compatibility is confirmed.
Proceed to C [Direct Connection] of Step.3
2 Check if the wireless access point is compatible with
WPS*.
Compatible with WPS:
Proceed to A [Easy Connection (WPS)] of Step.3
Not compatible with WPS:
Proceed to B [Manual Connection] of Step.3
* WPS is an abbreviation for Wi-Fi Protected Setup™.
≥ Android and Google Play are trademarks or registered trademarks of Google Inc.
≥ App Store is a service mark of Apple Inc.
≥ “Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
≥ QR Code is a registered trademark of DENSO WAVE INCORPORATED.
When connecting to a smartphone
A [Easy Connection (WPS)]
1 Press the Wi-Fi button on this unit and setup the Wi-Fi.
[Wi-Fi Setup] # [Set Wireless Access Point]
2 Touch the part with no display of a
wireless access point.
3 Touch [Easy Connection (WPS)].
4 Set the wireless access point to
waiting for WPS.
≥ A message is displayed on this unit screen when the connection
is complete.
5 Touch [Remote Ctrl] and start up the
smartphone application “Image App”.
≥ When the connection is complete, images of this unit is
displayed on the smartphone screen.
B [Manual Connection]
≥ Please refer to the operating instruction of the device in use for details
about the setting and display of the wireless access point.
1 Press the Wi-Fi button on this unit and setup the Wi-Fi.
[Wi-Fi Setup] # [Set Wireless Access Point]
2 Touch the part with no display of a
wireless access point.
3 Touch [Manual Connection].
4 Touch [Search].
≥ Please refer to the operating instructions (PDF
format) of this unit for details about the setting
when the [Set Manually] is selected.
5 Touch the wireless access point to be connected.
6 Touch [ENTER].
≥ If an Encryption key (Password) is not set, the connection is complete and
a message is displayed.
7 (When there is an Encryption key (Password))
Touch [INPUT], then enter the Encryption key
(Password) of the wireless access point.
≥ For details on how to enter characters, refer to the operating instructions
(PDF format).
≥ When the entry is complete, touch [Enter].
8 (When there is an Encryption key (Password))
Touch [NEXT].
≥ A message is displayed when the connection is complete.
9 Touch [Remote Ctrl] and start up the smartphone
application “Image App”.
≥ When the connection is complete, images of this unit is displayed on the
smartphone screen.
C [Direct Connection]
1 Press the Wi-Fi button on this unit and setup the Wi-Fi.
[Wi-Fi Setup] # [Direct Connection]
2 Touch [Change connection type].
3 Touch [QR code].
≥ The QR code is displayed on this unit screen.
4 Start up the smartphone application “Image App”.
5 Scan QR code displayed on this unit with the
smartphone.
≥ When using an iOS device, the profile install screen will be displayed on
the smartphone. After installing, close the displayed screen by pressing
the Home button and start up "Image App" again.
≥ When the connection is complete, images of this unit is displayed on the
smartphone screen.
Connect with using NFC
HC-V720/HC-V727/HC-V720M/HC-V520/HC-V520M
This function can be used with the NFC compatible device with Android (OS
version 2.3.3 or later). (Except for some models)
NFC is an abbreviation for Near Field Communication.
≥ When this unit is registered in the wireless access point and the
smartphone is connected to the wireless access point, the result is a
wireless access point connection. All others are direct connections.
1 Start up the smartphone application “Image App”.
2 Touch the smartphone on of this unit when a
message to touch the NFC mark of the device is
displayed on the smartphone screen.
≥ Proceed with the connection by following the smartphone screen
instructions.
≥ When the connection is complete, images of this unit is displayed on the
smartphone screen.
≥ If the unit is not recognized even when touching the smartphone, change
positions and try again.
≥ The NFC function cannot be used on the smartphone in use when a
message to touch the NFC mark of the device is not displayed. Try other
connection methods.
Loading...