Panasonic DMC-GX8K, DMC-GX8H, DMC-GX8A, DMC-GX8 User Manual

Basic Operating Instructions

Digital Camera/

Lens Kit/Body

Model No.

DMC-GX8A/DMC-GX8H

DMC-GX8K/DMC-GX8

Please read these instructions carefully before using this product, and save this manual for future use.

More detailed instructions on the operation of this camera are contained in “Operating Instructions for advanced features (PDF format)” in the supplied DVD.

Web Site: http://www.panasonic.com

Model number suffix “EB” denotes UK model.

SQT0787

F0715YD0

Dear Customer,

We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in these Operating Instructions.

Carefully observe copyright laws.

Recording of pre-recorded tapes or discs or other published or broadcast material for purposes

•

other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted.

Information for Your Safety

WARNING:

To reduce the risk of fire, electric shock or product damage,

•

Do not expose this unit to rain, moisture, dripping or splashing.

• Use only the recommended accessories.

• Do not remove covers.

• Do not repair this unit by yourself. Refer servicing to qualified service personnel.

The socket outlet shall be installed near the equipment and shall be easily accessible.

∫ Product identification marking

Product Location

Digital Camera Bottom

Battery charger Bottom

SQT0787 (ENG)

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC to our R&TTE products from our DoC server: http://www.doc.panasonic.de Contact to Authorized Representative: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany

This product is intended for general consumer. (Category 3) This product on purpose to connect to access point of 2.4 GHz WLAN.

∫ About the battery pack

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the type

•

recommended by the manufacturer.

• When disposing of the batteries, please contact your local authorities or dealer and ask for

the correct method of disposal.

Do not heat or expose to flame.

•

• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with

doors and windows closed.

Warning

Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC or incinerate.

∫ About the battery charger

CAUTION! To reduce the risk of fire, electric shock or product damage,

Do not install or place this unit in a bookcase, built-in cabinet or in another confined

•

space. Ensure this unit is well ventilated.

The battery charger is in the standby condition when the AC power supply cord is connected.

•

The primary circuit is always “live” as long as the power cord is connected to an electrical outlet.

(ENG) SQT0787

Cautions for Use

• Do not use any other USB connection cables except the supplied one or a genuine Panasonic

USB connection cable (DMW-USBC1: optional).

• Use a “High Speed HDMI micro cable” with the HDMI logo.

Cables that do not comply with the HDMI standards will not work. “High Speed HDMI micro cable” (Type D– Type A plug, up to 2 m (6.6 feet) long)

• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).

• Always use a genuine Panasonic shutter remote control (DMW-RSL1: optional).

Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).

•

If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.

• Do not use this unit near cell phones because doing so may result in noise adversely affecting

the pictures and/or sound.

• Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields

created by speakers or large motors.

•

Electromagnetic wave radiation may adversely affect this unit, disturbing the pictures and/or sound.

• If this unit is adversely affected by electromagnetic equipment and stops functioning properly,

turn this unit off and remove the battery or disconnect AC adaptor (DMW-AC10E: optional). Then reinsert the battery or reconnect AC adaptor and turn this unit on.

Do not use this unit near radio transmitters or high-voltage lines.

•

If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound may be adversely affected.

SQT0787 (ENG)

• Before cleaning the camera, remove the battery or the DC coupler (DMW-DCC8:

optional), or disconnect the power plug from the outlet.

• Do not press the monitor with excessive force.

• Do not press the lens with excessive force.

• Do not spray the camera with insecticides or volatile chemicals.

•

Do not keep rubber or plastic products in contact with the camera for a long period of time.

• Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean

the camera, since it may deteriorate the external case or the coating may peel off.

• Do not leave the camera with the lens facing the sun, as rays of light from the sun may

cause it to malfunction.

• Always use the supplied cords and cables.

• Do not extend the cords or the cables.

• During access (image writing, reading and deleting, formatting etc.), do not turn this unit

off, remove the battery, card or disconnect the AC adaptor (DMW-AC10E: optional). Furthermore, do not subject the camera to vibration, impact or static electricity.

• The data on the card may be damaged or lost due to electromagnetic waves, static electricity or

breakdown of the camera or the card. We recommend storing important data on a PC etc.

• Do not format the card on your PC or other equipment. Format it on the camera only to ensure

proper operation.

• The battery is not charged when the camera is shipped. Charge the battery before use.

• The battery is a rechargeable lithium ion battery. If the temperature is too high or too

low, the operating time of the battery will become shorter.

• The battery becomes warm after using and during and after charging. The camera also

becomes warm during use. This is not a malfunction.

• Do not leave any metal items (such as clips) near the contact areas of the power plug or

near the batteries.

• Store the battery in a cool and dry place with a relatively stable temperature: [Recommended

temperature: 15 oC to 25 oC (59 oF to 77 oF), Recommended humidity: 40%RH to 60%RH]

• Do not store the battery for a long time while fully charged. When storing the battery for a

long period of time, we recommend charging it once a year. Remove the battery from the camera and store it again after it has completely discharged.

These symbols indicate separate collection of waste electrical and electronic equipment or waste batteries. More detailed information is contained in “Operating Instructions for advanced features (PDF format)”.

(ENG) SQT0787

Contents

Information for Your Safety .................2

• Cautions for Use ..............................4

Preparation/Basic

Care of the camera ...............................8

Standard Accessories..........................9

Names and Functions of

Components........................................10

Preparation..........................................13

• Attaching the Shoulder Strap .........13

• Charging the Battery......................13

• Inserting/Removing the Battery......14

• Inserting/Removing the Card

(Optional).......................................14

• Formatting the card

(initialisation)..................................15

• Attaching/Removing the Lens ........16

• Opening the Monitor ......................16

• Setting Date/Time (Clock Set) .......17

Basic Operations................................18

• Using the Viewfinder ......................18

• Shutter button (Taking pictures) .....19

• Motion picture button

(Recording motion pictures) ..........19

• Mode dial

(Selecting a Recording Mode) .......20

• Cursor buttons/

[MENU/SET] button.......................20

• Front Dial/Rear Dial .......................21

• [LVF] button (Switching the

Monitor/Viewfinder)........................22

• Touch screen (Touch operations)...22

Setting menu items ............................23

Calling frequently-used menus

instantly (Quick Menu) .......................24

Assigning frequently used functions to the buttons

(function buttons)...............................24

Recording

Taking Pictures using the Automatic

Function (Intelligent Auto Mode)...... 25

• Recording night scenes

([iHandheld Night Shot])................ 25

• Combining pictures into a single picture with rich gradation

([iHDR]) ......................................... 26

• Taking a picture with a blurred

background (Defocus Control) ...... 26

• Recording images by changing the brightness (Exposure) or

colour tone .................................... 26

Recording motion pictures with manually set aperture value/ shutter speed

(Creative Video Mode) ....................... 27

Setting the Picture Quality

and Size .............................................. 28

• Setting the aspect ratio of

pictures ......................................... 28

• Setting the number of pixels ......... 28

• Setting the compression rate of

pictures ([Quality])......................... 29

Adjusting Focus Manually ................ 30

Select a Drive Mode ........................... 31

Recording 4K Photos ........................ 32

• Selecting pictures from

4K burst file and saving................. 33

Image Stabiliser.................................. 34

Recording Motion Picture ................. 36

• Recording motion pictures in 4K ... 38

SQT0787 (ENG)

Playback

Others

Playing Back Pictures........................ 39

Playing Back Motion Pictures........... 39

Deleting Pictures................................ 40

Using the [Playback] Menu ............... 41

• [RAW Processing] ......................... 41

Wi-Fi/NFC

What you can do with the Wi-FiR

function............................................... 43

Controlling with a Smartphone/

Tablet...................................................43

• Installing the smartphone/

tablet app “Image App ” ................. 43

Connecting to a smartphone/

tablet.................................................... 44

• Taking images via a smartphone/

tablet (remote recording)...............46

• Playing back images

in the camera ................................ 46

• Saving images stored

in the camera ................................ 47

• Sending images in the camera

to an SNS...................................... 47

• Adding location information to images stored in the camera

from a smartphone/tablet .............. 48

• Combining motion pictures recorded with Snap Movie according to your preference

on a smartphone/tablet ................. 48

About the supplied software .............49

Monitor Display/

Viewfinder Display..............................50

Menu list..............................................54

Troubleshooting .................................56

Specifications .....................................62

Digital Camera Accessory System ...69 Reading the Operating Instructions

(PDF format)........................................70

(ENG) SQT0787

Preparation/Basic

Care of the camera

To avoid damaging your camera and to experience the maximum enjoyment you should exercise the following precautions.

The lens, monitor and the camera body can sustain damage if the camera body is dropped or

•

subjected to excessive temperature, moisture, water or dust.

• The monitor can be damaged if excessive pressure is applied to the screen surface, during

actual use or while cleaning.

∫ Splash Proof

Splash Proof is a term used to describe an extra level of protection this camera offers against exposure to a minimal amount of moisture, water or dust. Splash Proof does not guarantee that damage will not occur if this camera is subjected to direct contact with water.

In order to minimise the possibility of damage please be sure the following precautions are taken:

– The Splash Proof feature works in conjunction with the H-HS12035 and H-HS35100 lenses

that were specifically designed to support this feature.

– Make sure that all doors are securely closed. – Make sure that you are in a dry and secure place when changing the battery, lens or memory

card. After changing, make sure their protective doors are securely closed.

–

If this camera is exposed to water, sand or any other foreign material clean it as soon as possible, taking the necessary precautions that the foreign substance does not get inside the camera.

– Under no circumstances should you touch or place any foreign objects within the camera or

in close proximity of the camera’s image sensor.

If sand, dust, or liquids such as water droplets adhere to the monitor, wipe them off with a dry soft cloth.

– Not doing so may cause the monitor to respond incorrectly to touch operations. – If the monitor is closed when such liquids are present, malfunction may result.

∫ Condensation

•

Condensation may occur on the lens, monitor or in the viewfinder when the room temperature or humidity changes rapidly. This may cause the image to temporarily become hazy. If this occurs, turn the camera off and allow the camera to sit in a temperature stable environment for several minutes. It will clear by itself.

• If you know that you will be moving between areas where there will be a large change in

temperature or humidity, you can help prevent condensation forming on the camera by placing the camera in a large plastic zipper bag, so condensation will form on the bag, not the camera. Allow the temperature to stabilise before removing the camera from the bag.

About the firmware of your interchangeable lens

For smoother recording, we recommend updating the firmware of the interchangeable lens to the latest version.

To view the latest information on the firmware or to download the firmware, visit the

•

support site below: http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

• To check the firmware version of the interchangeable lens, attach it to the camera body and

select [Version Disp.] in the [Setup] menu.

SQT0787 (ENG)

Standard Accessories

DMC-GX8K

H-FS1442A

VYC1113

VYF3510

VFC4605

DMC-GX8H

H-FS14140

VYC1119

VYF3514

VFC4605

H-HS12035

VYC1084

VYF3480

DMC-GX8A

VKF4971

DMW-BLC12E

SFM0083

K2CT3YY00034

K1HY08YY0031

DE-A80A

VFC5167

:

SYQ0510

:

SYQ0511

SYQ0503

Check that all the accessories are supplied before using the camera. Product numbers correct as of July 2015. These may be subject to change.

Digital Camera Body (This is referred to as camera body in these operating instructions.)

Preparation/Basic

1 Interchangeable Lens

¢1,4,5

2 Lens Hood

3 Lens Cap

4 Lens Rear Cap

5 Body Cap

¢2

¢3

Battery Pack

(Indicated as

battery pack

battery

in the text)

Charge the battery before use.

Battery Charger

(Indicated as

8 AC Mains Lead

battery charger

charger

in the text)

9 USB Connection Cable

DVD

• Software:

Use it to install the software to your PC.

• Operating Instructions for advanced features

11 Shoulder Strap

¢3

Hot shoe cover

A:Black B: Silver

13 Eyecup

¢1 This is referred to as lens in these operating

¢3

instructions.

¢2 This is attached to the interchangeable lens at

the time of purchase.

¢3 This is attached to the camera body at the time

¢4 The interchangeable lenses (H-FS14140/

of purchase.

H-FS1442A) included in DMC-GX8H /DMC-GX8K are not dust- and splash-proof.

¢5 The interchangeable lens (H-HS12035) included in DMC-GX8A is dust- and splash-proof.

• SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the

text.

• The card is optional.

• Description in these operating instructions is based on the interchangeable lens (H-FS14140).

• Consult the dealer or Panasonic if you lose the supplied accessories. (You can purchase the

accessories separately.)

(ENG) SQT0787

Preparation/Basic

Status indicator (P17)/ Wi-Fi

connection lamp

• The lamp lights green when the camera is

turned on, and lights blue when it is connected to Wi-Fi.

Camera ON/OFF switch (P17)

[Fn] button (Fn1) (P24)

Motion picture button (P36)

Function button (Fn13) (P24)

Rear dial (P21)

Shutter button (P19)

Front dial (P21)

Self-timer indicator/ AF Assist Lamp

Function button (Fn7) (P24)

Exposure compensation dial (P26)

Mode dial (P20)

• Rotate the mode dial to switch the Recording

Mode.

Hot shoe (Hot shoe cover) (P12)

• Keep the Hot Shoe Cover out of reach of

children to prevent swallowing.

Stereo microphone

• Be careful not to cover the microphone with

your finger. Doing so may make sound difficult to record.

Focus distance reference mark

[REMOTE/MIC] socket

• An external microphone (optional) can

record higher quality audio than the built-in microphone.

[AV OUT/DIGITAL] socket

[HDMI] socket

Shoulder strap eyelet (P13)

Speaker

• Be careful not to cover the speaker with your

finger. Doing so may make sound difficult to hear.

Lens release button (P16)

Lens lock pin

Mount

Sensor

Lens fitting mark (P16)

Names and Functions of Components

∫ Camera body

6 7 8

319

SQT0787 (ENG)

1211 13

1514

22 2125 24

2023

Preparation/Basic

Touch screen (P22)/monitor (P50)

Viewfinder (P22)

Eyecup

• Keep the Eyecup out of reach of children to

prevent swallowing.

Eye sensor (P22)

[Q.MENU] button (P24)/ Function button (Fn2) (P24)

[(] (Playback) button (P39)

[DISP.] button

• Each time this is pressed, the display on the

monitor is switched.

Diopter adjustment dial (P18)

[LVF] button (P22)/ Function button (Fn6) (P24)

[Fn] button (Fn5) (P24)

Focus mode lever (P30)

[AF/AE LOCK] button

Cursor buttons (P20)

3/[ ] (ISO sensitivity)

1/[ ] (White Balance)

2/[ ] (Auto Focus Mode)

4/[ ] (Drive mode) (P31)

– Single (P31)/Burst/4K Photo (P32)/

Auto bracket/Self-timer

[MENU/SET] button (P23)

NFC antenna [ ] (P45, 47)

[Fn] button (Fn4) (P24)

[ ] (Delete/Cancel) button (P40)/ Function button (Fn3) (P24)

DC coupler cover

• When using an AC adaptor, ensure that the

Panasonic DC coupler (DMW-DCC8: optional) and AC adaptor (DMW-AC10E: optional) are used.

• Always use a genuine Panasonic AC

adaptor (DMW-AC10E: optional).

• When using an AC adaptor, use the AC

mains lead supplied with the AC adaptor.

Release lever (P14)

Card/Battery door (P14)

Tripod mount

• It may not be possible to attach and securely

fasten a tripod with a screw length of 5.5 mm (0.22 inch) or more to the camera. Doing so may also damage the camera.

27 28

46 4344

31 32

41 42

34 35

(ENG) SQT0787

Preparation/Basic

378941526

∫ Lens

H-FS14140 H-HS12035

132 465 78

H-FS1442A 1 Lens surface

2Tele 3 Focus ring (P30) 4 Zoom ring 5Wide 6 [O.I.S.] switch (P34) 7 Contact point 8 Lens fitting mark (P16) 9 Lens mount rubber

∫ Removing the Hot Shoe Cover

The camera comes with a hot shoe cover attached to the hot shoe.

Remove the hot shoe cover by pulling it in the direction indicated by arrow 2 while pressing it in the direction indicated by arrow 1.

When the hot shoe is not in use, make sure to attach the hot

•

shoe cover.

• Please be careful not to lose the hot shoe cover.

SQT0787 (ENG)

Preparation/Basic

Preparation

• Check that the camera is turned off.

Attaching the Shoulder Strap

•

We recommend attaching the shoulder strap when using the camera to prevent it from dropping.

• Perform steps 1 to 8 and then attach the other side of the shoulder strap.

• Use the shoulder strap around your shoulder. – Do not wrap the strap around your neck. – It may result in injury or accident.

• Do not leave the shoulder strap where an infant can reach it. – It may result in an accident by mistakenly wrapping around the neck.

Charging the Battery

The battery that can be used with this unit is DMW-BLC12E.

1 Attach the battery paying attention to the direction of the battery. 2 Connect the AC mains Lead.

•

The [CHARGE] indicator A lights up and charging begins.

∫ About the [CHARGE] indicator

On: Charging.

Off: Charging has completed.

•

When the [CHARGE] indicator flashes

– The battery temperature is too high or too low. It is recommended to charge the battery again

in an ambient temperature of between 10 oC and 30 oC (50 oF and 86 oF).

– The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.

(Disconnect the charger from the electrical socket and detach the battery after charging is completed.)

(ENG) SQT0787

Preparation/Basic

∫ Charging time

Charging time Approx. 140 min

•

The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal.

Inserting/Removing the Battery

• Always use genuine Panasonic batteries (DMW-BLC12E).

• If you use other batteries, we cannot guarantee the quality of this product.

• Being careful about the battery orientation, insert all the way until you hear a locking sound and

then check that it is locked by lever A. Pull the lever A in the direction of the arrow to remove the battery.

Inserting/Removing the Card (Optional)

• Push it securely all the way until you hear a “click” while being careful about the direction in

which you insert it. To remove the card, push the card until it clicks, then pull the card out upright.

SQT0787 (ENG)

Preparation/Basic

∫ About cards that can be used with this unit

SD Memory Card (512 MB to 2 GB)

SDHC Memory Card (4 GB to 32 GB)

SDXC Memory Card (48 GB to 128 GB)

• SDHC Memory Cards and SDXC Memory Cards can be

used only with their compatible devices.

• Check that the PC and other equipment are compatible when

using the SDXC Memory Cards.

http://panasonic.net/avc/sdcard/information/SDXC.html

• This unit is compatible with UHS-I UHS Speed Class 3

standard SDHC/SDXC memory cards.

• Operation of the cards on the left has been confirmed with

Panasonic’s cards.

∫ About motion picture/4K photo recording and speed class ratings

According to the [Rec Format] (P37) and [Rec Quality] (P37) of a motion picture, the required card differs. To record 4K photos, you need a card with a speed class rating that supports 4K photo recording. Use a card that meets the following ratings of the SD Speed Class or UHS Speed Class.

SD Speed Class and UHS Speed Class are the speed standards regarding continuous writing.

•

To check the class, see the labelled side, etc. of the card.

[Rec Format] [Rec Quality] Speed class Label example

[AVCHD] All

[MP4] FHD/HD/VGA

[MP4] 4K UHS Speed Class 3

Class 4 or higher

When recording 4K photos UHS Speed Class 3

• Please confirm the latest information on the following website.

http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

• Keep the Memory Card out of reach of children to prevent swallowing.

Formatting the card (initialisation)

Format the card before recording a picture with this unit.

Since data cannot be recovered after formatting, make sure to back up necessary data in advance. Select the menu. (P23)

> [Setup] > [Format]

Confirmation screen is displayed. It is executed when [Yes] is selected.

•

(ENG) SQT0787

Preparation/Basic

Attaching/Removing the Lens

• Change lenses where there is not a lot of dirt or dust.

• Do not press the lens release button A when you attach a lens.

∫ Detaching the lens

1 Attach the lens cap. 2 While pressing on the lens release button B, rotate

the lens toward the arrow until it stops and then remove.

Opening the Monitor

At the time when this camera is purchased, the monitor is stowed in the camera body. Bring out the monitor as shown below.

1 Open the monitor. (Maximum 180o) 2 It can be rotated 180o forward. 3 Return the monitor to its original position.

Only rotate the monitor after opening it wide enough, and be careful not to use

•

excessive force as it may be damaged.

• When not using the monitor it is recommended that you close it with the screen facing inward to

prevent dirt and scratches.

SQT0787 (ENG)

Preparation/Basic

Setting Date/Time (Clock Set)

• The clock is not set when the camera is shipped.

1 Turn the camera on.

•

When the camera is turned on, the status indicator 1 lights up green.

2 Press [MENU/SET]. 3 Press 2/1 to select the items (year, month, day, hour,

minute), and press 3/4 to set.

4 Press [MENU/SET] to set. 5 When [The clock setting has been completed.] is displayed, press [MENU/SET]. 6 When [Please set the home area] is displayed, press [MENU/SET].

7 Press 2/1 to select the home area, and then press

[MENU/SET].

(ENG) SQT0787

Preparation/Basic

Basic Operations

Using the Viewfinder

Adjusting the angle of the viewfinder

You can record images from a variety of angles by adjusting the angle of the viewfinder.

Taking pictures at a low angle

Be careful not to catch your finger, etc. in the viewfinder.

•

• When adjusting the angle of the viewfinder, be careful not to apply too much force, as

this may cause malfunction.

• Return the viewfinder to its original position completely when the camera is not in use.

• When the viewfinder surface becomes dirty, remove the Eyecup, blow away the dust with a

blower (commercially available), and wipe the surface lightly with a dry, soft cloth.

• Use of an external flash (optional) will limit the maximum angle to which the viewfinder can be

adjusted.

Diopter adjustment

Adjust the diopter to suit your vision so that you can see the characters displayed in the viewfinder clearly.

SQT0787 (ENG)

Preparation/Basic

6060603.53.53.5

Shutter button (Taking pictures)

The shutter button works in two steps. To take a picture, press it.

Press the shutter button halfway to focus.

A Aperture value B Shutter speed C Focus indication

• Aperture value and shutter speed are displayed.

(It will flash in red if the correct exposure is not achieved, except when set to flash.)

• Once the subject is in focus, the focus indication is displayed.

(When the subject is not in focus, the indication flashes.)

Press the shutter button fully (push it in further), and take the picture.

• When the image is correctly focused, the picture will be taken, since the [Focus/Release

Priority] is set initially to [FOCUS].

• The focus range is different depending on the lens used.

• Even during menu operation or image playback, if you press the shutter button halfway, you

can instantly set the camera ready for recording.

Motion picture button (Recording motion pictures)

Press the motion picture button to start and stop recording a motion picture.

Start recording by pressing the motion picture button.

• Release the motion picture button right after you press it.

Stop the recording by pressing the motion picture button again.

(ENG) SQT0787

Preparation/Basic

Mode dial (Selecting a Recording Mode)

Select the mode by rotating the mode dial.

• Rotate the mode dial slowly to select the desired mode.

Intelligent Auto Mode (P25)

The subjects are recorded using settings automatically selected by the camera.

Intelligent Auto Plus Mode (P25)

Allows you to adjust the brightness (Exposure) and colour hue when in Intelligent Auto Mode.

Programme AE Mode

Records at the aperture value and shutter speed set by the camera.

Aperture-Priority AE Mode

The shutter speed is automatically determined by the aperture value you set.

Shutter-Priority AE Mode

The aperture value is automatically determined by the shutter speed you set.

Manual Exposure Mode

The exposure is adjusted by the aperture value and the shutter speed which are manually adjusted.

Creative Video Mode (P27)

Records motion pictures with a manually set aperture value and shutter speed. ¢ You cannot take still pictures.

Custom Mode

Use this mode to take pictures with previously registered settings.

Panorama Shot Mode

This mode allows you to take panorama pictures.

Creative Control Mode

Record while checking the image effect.

Cursor buttons/[MENU/SET] button

Pressing the cursor button: Selection of items or setting of values etc., is performed. Pressing [MENU/SET]: Confirmation of setting contents, etc., is performed.

These operating instructions expresses the up, down, left, and

•

right of the cursor button as 3/4/2/1.

SQT0787 (ENG)

Preparation/Basic

Front Dial/Rear Dial

Rotating: Selection of items or setting of values is performed during the various settings.

These operating instructions describe operations of the front dial/rear dial as follows:

•

e.g.: When rotating the front dial to the left or right

Allows you to set the aperture, shutter speed, and other settings when in / / / modes.

Mode dial Front dial Rear Dial

Programme Shift Programme Shift

Aperture value Aperture value

Shutter speed Shutter speed

Aperture value Shutter speed

In [Dial Set.] in the [Custom] menu, you can change the operation methods of the rear dial and

•

front dial.

Temporarily changing the items assigned to the front/rear dials ([Dial Operation

Switch])

You can temporarily change the items assigned to the front/rear dials using the function button to which [Dial Operation Switch] is assigned. [Dial Operation Switch] is assigned to [Fn13] at the time of purchase. (P24)

You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch

•

Setup] in [Dial Set.] in the [Custom] menu.

e.g.: When rotating the rear dial to the left or right

1 Press [Fn13] A.

•

A guide will be displayed showing the items temporarily assigned to the front/rear dials.

2 Rotate the front/rear dials while the guide is

displayed.

The settings of the items assigned to the dials will change.

•

3 Press [MENU/SET] and set.

•

You can also complete this step by performing either of the operations below:

– Press the shutter button halfway – Press [Fn13]

• Items that are temporarily assigned to the front/rear dials can be used only while the guide

1) or setting screen (step 2 ) is displayed.

(step

(ENG) SQT0787

Preparation/Basic

Fn9

Fn8

Fn10

Fn11

SNAP

Fn12

2.0X2.0X2.0X2.0X

[LVF] button (Switching the Monitor/Viewfinder)

Press [LVF] to switch between the Monitor and Viewfinder.

A [LVF] button B Eye sensor

Press [LVF].

• The monitor/viewfinder will switch as follows:

Automatic viewfinder/

monitor switching

Viewfinder display

Monitor display

¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the

focus as the eye sensor is activated.

∫ Notes on automatic viewfinder/monitor switching

Automatic viewfinder/monitor switching enables the eye sensor to switch the display to the viewfinder automatically when you bring your eye or an object near it.

Touch screen (Touch operations)

Touch screen of this unit is capacitive. Touch the panel directly with your bare finger.

∫ Tou ch

To touch and release the touch screen.

When selecting features using the touch screen, be sure

•

to touch the centre of the desired icon.

∫ Drag

A movement without releasing the touch screen. This can also be used to move to the next image during playback, etc.

∫ Pinch (enlarge/reduce)

Pinch the touch screen apart (enlarge) or together (reduce) with two fingers.

SQT0787 (ENG)

+ 50 hidden pages