Frequency Range87.9MHz - 107.9MHz
Usable Sensitivity10.2dBf. (75Ω)
50dB Quieting Sensitivity15.2dBf. (75Ω)
Frequency Response30Hz-15kHz (±3dB)
Alternate Channel Selectivity75dB
Stereo Separation35dB (1kHz)
Image Rejection Ratio55dB
IF Rejection Ratio100dB
Signal to Noise Ratio62dB
AM Radio
Frequency Range530 - 1,710kHz
Usable Sensitivity27dB/µV (S/N 20dB)
CD Player
Sampling Frequency8 Times Oversampling
DA Converter1bit DAC System
Pick-Up TypeAstigma 3-beam
Light SourceSemiconductor Laser
Wave Length790nm
Frequency Response20Hz to 20,000Hz (±1dB)
Signal to Noise Ratio96dB
Total Harmonic Distortion0.01% (1kHz)
Wow and FlutterBelow measurable limits
Channel Separation75dB
Dimensions**7”×1-15/16”×6-5/16”
(178×50×160mm)
Weight**3lbs 1oz (1.4kg)
* Specifications and the design are subject to possible modification
without notice due to improvements.
1 ABOUT LEAD FREE SOLDER (PbF) 3
2 LASER PRODUCTS
3 FEATUERS
4 REPLACING THE FUSE
5 MAINTENANCE
6 NOTES
7 DIMENSIONS
8 WIRING CONNECTION
9 TERMINALS DESCRIPTION
10 PACKAGE AND IC BLOCK DIAGRAM
11 PACKING PARTS LIST
12 REPLACEM ENT PARTS LIST [CQ-C3401U]
13 EXPLODE D VIEW (Unit) [CQ-C3401U]
3
3
14 REPLACEM ENT PARTS LIST [CQ-C3301U]
3
15 EXPLODE D VIEW (Unit) [CQ-C3301U]
16 CD PLAYER PARTS LIST
3
3
17 EXPLODED VIEW (CD Deck)
3
18 WIRING DIAGRAM
19 SCHEMAT IC DIAGRAM -1
4
5
20 SCHEMAT IC DIAGRAM -2
8
21 BLOCK DIAGRAM
11
12
17
18
23
24
27
28
34
35
39
2
CQ-C3401U / CQ-C3301U
1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
Caution :
•
•
Pb free solder has a higher melting point than standard
• •
solder; Typically the melting point is 50 - 70°F (30 40°C) higher. Please use a soldering iron with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
•
•
Pb free solder will tend to splash when heated too high
• •
(about 1100°F/600°C)
•
•
This lead free solder will be used for the products after
• •
serial No. 1,000,001.
2 LASER PRODUCTS
3 FEATUERS
•
•
Digital servo for reliable playback.
• •
•
•
PLL (Phase Locked Loop) synthesized tuning.
• •
•
•
18-FM, 6-AM presets with preset scan.
• •
•
•
Removable face plate.
• •
•
•
MP3/WMA Playback from CD-R/RW.
• •
•
•
CD Changer Control.
• •
•
•
The following table describes the differences between
• •
2 models
4 REPLACING THE FUSE
Use fuses of the same specified rating (15amps). Using
different substitutes or fuses with higher ratings, or connecting
the product directly without a fuse, could cause fire or damage
to the stereo unit.
5 MAINTENANCE
Your product is designed and manufactured to ensure a
minimum of maintenance. Use a dry, a soft cloth for routine
exterior cleaning. Never use benzine, thinner or other solvents.
6 NOTES
[RADIO BLOCK]
Do not align the AM/FM package block. When the package
block is necessary, it will be supplied already aligned at the
factory.
[CD DECK BLOCK]
This model has no servo alignment points because
microcomputer controls the servo circuit.
7 DIMENSIONS
3
CQ-C3401U / CQ-C3301U
8 WIRING CONNECTION
4
9 TERMINALS DESCRIPTION
CQ-C3401U / CQ-C3301U
9.1. Main Block
IC601 : YESAM282
Pin
No.
1 (NC)----2 VSMRadio signal strengthI000
3 SD/STRadio station detectI0.300.8
4 AVSSGround-000
5 SCLAudio control serial clockO4.9 4.9 4.9
6 SDAAudio control dataO4.9 4.9 4.9
7 AVREF(Conecting to +5V)-4.9 4.9 4.9
8 CD SOCD data outputI2.1 2.3 1.7
9 CD SICD data inputO003.3
10 CD SCKCD clockO4.7 4.7 4.7
11 CDC DATA/
F
85 TDO--3.3
86 TDI--0
87 /TRST--3.3
88 TCK--0
89 TMS--3.3
90 CVSS8GND-3.3
91 CVDD5CORE CPU system (1.6V) power
92 HPIENA GNDI1.6
93 DVSS6GND-0
94---95 CLKENA Oscillation output Cainabl signalO3.3
96 X1Crystal ConnectionO0
97 X2/CLKIN Crystal ConnectionI0
98 RSReset signal inputI1
99 D0Data base of FLASH ROMI/O3.4
100 D1I/O0
101 D2I/O0
102 D3I/O0
103 D4I/O0
104 D5I/O0
105 A16Address bus of FLASH ROMO0
106 DVSS7GND-0
107 A17Address bus of FLASH ROMO3.3
108 A18Address bus of FLASH ROMO0
109 A19Address bus of FLASH ROMO0
110 A20Address bus of FLASH ROMO0
111 CVSS9GND-0
112 DVDD5I/O system (3.3V) power supply-3.3
113 D6Data bus of FLASH ROMI/O0
114 D7I/O0
115 D8I/O0
116 D9I/O0
117 D10I/O0
supply
Servo DSP)
DSP)
--3.3
supply
-1.6
I3.3
O3.3
-0
6
Pin
PortDescriptionsI/O(V)
No.
118 D11Data bus of FLASH ROMI/O0
119 D12I/O0
120 STATStatus signal inputI0.4
121 D13Data path of FLASH ROMI/O0
122 D14I/O0
123 D15I/O0
124---125 CVDD6CORE CPU system (1.6V) power
-1.6
supply
126 CVSS10 GND-0
127---128 DVSS8I/O system (3.3V) power supply-0
129---130 DVDD6I/O system (3.3V) power supply-3.3
131 A0Address bus of FLASH ROMO0
132 A1O0
133 A2O3.3
134 A3O3.3
135 /RSTReset signal output (To Servo DSP)O3.3
136 A4Address bus of FLASH ROMO3.3
137 A5O0
138 A6O3.3
139 A7O3.3
140 A8O0
141 A9O3.3
142 CVDD7CORE CPU system (1.6V) power
-1.6
supply
143---144 DVSS9GND-0
CQ-C3401U / CQ-C3301U
7
CQ-C3401U / CQ-C3301U
10 PACKAGE AND IC BLOCK DIAGRAM
10.1. Main Block
PA051 : YESAP387
IC201 : C1BB00000543
IC271 : YESAM274
8
IC401 : YESAM284
CQ-C3401U / CQ-C3301U
IC650 : YESAM265
10.2. Display Block
IC905 : YESAM264
IC681 : YESAM273
9
CQ-C3401U / CQ-C3301U
10.3. CD Servo Block
IC403 : YESAM171
IC402 : YESAM271
IC404 : YESAM178
IC405 : YESAM270
10
11 PACKING PARTS LIST
CQ-C3401U / CQ-C3301U
•
•
Item numbers listed below should not order regular spare parts.
• •
Item No.Part No.Part Name & DescriptionQ´tyRemarks
1—Inner Carton1Not available
2—Packing Pad (Front)1Not available
3—Packing Pad (Rear)1Not available
4—Instruction Kit1Not available
—Operating Instructions(1)Not available
—Installation Instructions(1)Not available
—Owners Information Card(1)Not available
5YEP0FZ5698Installation Kit1
—Lock Cancel Plate(2)Not available
—Mounting Bolt(1)Not available
—Rubber Bushing(1)Not available
6YESFC05029Trim Plate1
7YESAJ01223Power Connector1
8YEFX0217263Mounting Collar1
9YEFA131839Removable Face Plate Case1
10EUR7641010Remote Control Unit (includes a battery)1
(not available)
11
CQ-C3401U / CQ-C3301U
12 REPLACEMENT PARTS
Ref. No.Part No.Part Name & DescriptionRemarks
LIST [CQ-C3401U]
Notes :
1. Be sure to make your orders of replacement parts
according to this list.
2. Important safety notice: Components, identified by
have special characteristics important for safety. When
replacinganyofthesecomponents,useonly
manufacturer´s specified parts.
3. Location keys in the remarks column indicates the general
location of the parts shown in the exploded drawing, as in a
road map.
4. The marking (RTL) indicates that Retention Time is limited
for this item. After the discontinuation of assembly in
production, the item will continue to be available for a
specific period of time. The retention period of availability is
dependent on the type of assembly, and in accordance with
the laws governing part and product retention. After the end
of this period, the assembly will no longer be available.
•
•
Order intake period is basically six months after the first
• •
shipment.
5. Reference materials of parts with the “TSN“ mark in the
remarks column are uploaded in the TSN (Technical
Service Navigation) system website. Please download from
that website for references.
Ref. No.Part No.Part Name & DescriptionRemarks
[7211-02-11] Main Block
IC´s and TRANSISTORs