Panasonic CQ-C1333C, CQ-C1303W, CQ-C1103W, CQ-C1333W Installation Instruction
YFM284C503CA PTW1205-2 Printed in China(Y)
2
1
E
N
G
L
I
S
H
CQ-C3303W
*Available Discs (a Page 14)
Safety Information
Warning
Observe the following warnings when using
this unit.
❑
The driver should neither watch the display nor
operate the system while driving.
Watching the display or operating the system will distract
the driver from looking ahead of the vehicle and can cause
accidents. Always stop the vehicle in a safe location and use
the parking brake before watching the display or operating
the system.
❑
Use the proper power supply.
This product is designed for operation with a negative
grounded 12 V DC battery system. Never operate this product with other battery systems, especially a 24 V DC battery
system.
❑
Protect the Deck Mechanism.
Do not insert any foreign objects into the slot of this unit.
❑
Do not disassemble or modify the unit.
Do not disassemble, modify the unit or attempt to repair the
product yourself. If the product needs to be repaired, consult
your dealer or an authorized Panasonic Service Center.
❑
Do not use the unit when it is out of order.
If the unit is out of order (no power, no sound) or in an
abnormal state (has foreign objects in it, is exposed to
water, is smoking, or smells), turn it off immediately and
consult your dealer.
❑
Refer fuse replacement to qualified service personnel.
When the fuse blows out, eliminate the cause and have it
replaced with the fuse prescribed for this unit by a qualified
service engineer. Incorrect replacement of the fuse may lead
to smoke, fire, and damage to the product.
Observe the following warnings when
installing.
❑
Disconnect the lead from the negative (–) battery
terminal before installation.
Wiring and installation with the negative (–) battery terminal
connected may cause electrical shock and injury due to a
short circuit.
Some cars equipped with the electrical safety system have
specific procedures of battery terminal disconnection.
FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE
UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY
SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND
PERSONAL INJURY OR DEATH.
❑
Never use safety-related components for installation, grounding, and other such functions.
Do not use safety-related vehicle components (fuel tank,
brake, suspension, steering wheel, pedals, airbag, etc.) for
wiring or fixing the product or its accessories.
❑
Installing the product on the air bag cover or in a
location where it interferes with airbag operation is
prohibited.
❑
Check for piping, gasoline tank, electric wiring, and
other items before installing the product.
If you need to open a hole in the vehicle chassis to attach or
wire the product, first check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole
from outside if possible.
❑
Never install the product in a location where it interferes with your field of vision.
❑
Never have the power cord branched to supply other
equipment with power.
❑
After installation and wiring, you should check the
normal operation of other electrical equipment.
The continuation of their using in abnormal conditions may
cause fire, electrical shock or a traffic accident.
❑
In the case of installation to an airbag-equipping
car, confirm warnings and cautions of the vehicle
manufacturer before installation.
❑
Make sure the leads do not interfere with driving or
getting in and out of the vehicle.
❑
Insulate all exposed wires to prevent short circuiting.
■
Read the operating instructions for the unit and all other components of your car audio system carefully before using the
system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no
responsibility for any problems resulting from failure to
observe the instructions given in this manual.
■
This manual uses pictographs to show you how to use the
product safely and to alert you to potential dangers resulting
from improper connections and operations. The meanings of
the pictographs are explained below. It is important that you
fully understand the meanings of the pictographs in order to
use this manual and the system properly.
This pictograph intends to alert you to the presence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in severe injury or death.
Warning
This pictograph intends to alert you to the presence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in injury or material damage.
Caution
3
2
E
N
G
L
I
S
H
CQ-C3303W
Caution
Observe the following cautions when using this
unit.
❑
Keep the sound volume at an appropriate level.
Keep the volume level low enough to be aware of road and
traffic conditions while driving.
❑
This unit is designed for use exclusively in automobiles.
❑
Do not operate the unit for a prolonged period with
the engine turned off.
Operating the audio system for a long period of time with the
engine turned off will drain the battery.
❑
Do not expose the unit to direct sunlight or excessive heat.
Otherwise these will raise the interior temperature of the
unit, and it may lead to smoke, fire, or other damage to the
unit.
❑
Do not use the product where it is exposed to water,
moisture, or dust.
Exposure of the unit to water, moisture, or dust may lead to
smoke, fire, or other damage to the unit. Make especially
sure that the unit does not get wet in car washes or on rainy
days.
❑
Set the volume level to low enough before the AUX
connection is completed.
Failure to observe this, the loud noise may come out and
damage your speakers and your hearing.
❑
Do not connect the front AUX directly with a speaker/headphone output. Failure to observe this, the
sound may not only be distorted, but also break the
internal amplifier.
Observe the following cautions when
installing.
❑
Refer wiring and installation to qualified service
personnel.
Installation of this unit requires special skills and experience.
For maximum safety, have it installed by your dealer.
Panasonic is not liable for any problems resulting from your
own installation of the unit.
❑
Follow the instructions to install and wire the product.
Not following the instructions to properly install and wire the
product could cause an accident or fire.
❑
Take care not to damage the leads.
When wiring, take care not to damage the leads. Prevent
them from getting caught in the vehicle chassis, screws, and
moving parts such as seat rails. Do not scratch, pull, bend or
twist the leads. Do not run them near heat sources or place
heavy objects on them. If leads must be run over sharp
metal edges, protect the leads by winding them with vinyl
tape or similar protection.
❑
Use the designated parts and tools for installation.
Use the supplied or designated parts and appropriate tools
to install the product. The use of parts other than those supplied or designated may result in internal damage to the unit.
Faulty installation may lead to an accident, a malfunction or
fire.
❑
Do not block the air vent or the cooling plate of the
unit.
Blocking these parts will cause the interior of the unit to
overheat and will result in fire or other damage.
❑
Do not install the product where it is exposed to
strong vibrations or is unstable.
Avoid slanted or strongly curved surfaces for installation. If
the installation is not stable, the unit may fall down while
driving and this can lead to an accident or injury.
❑
Installation Angle
The product should be installed in a horizontal position with
the front end up at a convenient angle, but not more than
30˚.
The user should bear in mind that in some areas there may
be restrictions on how and where this unit must be installed.
Consult your dealer for further details.
❑
Wear gloves for safety. Make sure that wiring is
completed before installation.
❑
To prevent damage to the unit, do not connect the
power connector until the whole wiring is completed.
❑
Do not connect more than one speaker to one set of
speaker leads. (except for connecting to a tweeter)
4
3
E
N
G
L
I
S
H
CQ-C3303W
Safety Information (continued)
Caution
THIS PRODUCT IS A CLASS ILASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
4
E
N
G
L
I
S
H
CQ-C3303W
5
Panasonic welcomes you to our constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully
selected components, and assembled by people who are proud of the reputation their work has built for our company.
We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability
we have built into it, you too will be proud to be a member of our family.
Features Contents
■ Large-sized volume control
A large-sized rotary volume control that looks like one
belonging to a Hi-Fi audio system is featured.
■ SQ (Sound Quality)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music
type.
■ The AUX input terminal is equipped on the
front panel.
Your mobile audio player and other devices are connectable to this unit without any difficulty.
Common
Safety Information .............................................. 2
Features ............................................................... 5
Contents .............................................................. 5
Accessories ........................................................ 6
Remote Control Unit (Option) ........................... 6
Preparation ........................................................ 7
¡ First Time Power On
Clock Setting
General ................................................................ 8
Each source
Radio ................................................................. 10
Before Disc Playback ....................................... 12
CD Player .......................................................... 13
MP3 Player ........................................................ 14
Notes on MP3 ................................................... 16
As needed
Audio Settings .................................................. 18
¡ Volume
¡ Bass/Treble
¡ Balance/Fader
Function Settings ............................................. 20
¡ Level Meter Display Patterns (PATTERN)
¡ Mute/Attenuation
¡ AUX Skip
Anti-Theft System ............................................ 22
Fuse ................................................................... 23
Maintenance ..................................................... 23
Notes on Discs ................................................. 23
Troubleshooting ............................................... 24
Specifications ................................................... 27
6
5
E
N
G
L
I
S
H
CQ-C3303W
¡ This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)
¡ The optional remote control is available from your local dealer. (CA-RC80N)
Note:
¡ The number in parentheses underneath each accessory part name is the part number for maintenance and service.
¡ Accessories and their parts numbers are subject to modification without prior notice due to improvements.
¡ Trim Plate and Mounting Collar are mounted on the main unit at shipment.
Accessories
Remote Control Unit (Option)
Installation
Instructions
(YEFM294113)
Power
Connector
(YGAJ021009)
Q'ty: 1
Lock Cancel
Plate
Q'ty: 2
Mounting
Bolt
Q'ty: 1
Rubber
Bushing
Q'ty: 1
Mounting
Collar
(YEFX0217263)
Q'ty: 1
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
OO-OOOOO
Operating
Instructions
(YEFM285757)
Removable
Face Plate
Case
(YEFA131839)
Q'ty: 1
Trim Plate
(YEFC051011)
Q'ty: 1
Instruction kit Q'ty: 1 set
Installation kit (YEP0FZ5698)
MUTEMUTE
PWRPWR
MODEMODE
VOLVOL
CAR AUDIO
MUTE
PWR
MODE
BANDBANDBAND
VOL
TUNE
TRACK
POWER
Power
Mute/attenuation
Volume
Tune
Track selection
Fast forward/fast
reverse
Mode
(Source)
Band
Pause
(CA-RC80N)
7
6
E
N
G
L
I
S
H
CQ-C3303W
Preparation
First Time Power On
The 24-hour system is used for the clock.
q Press[SRC] (PWR) to turn on the power.
w Press [DISP] (CLOCK).
Clock display
e Press and hold [DISP] (CLOCK) for more than 2 sec-
onds.
Hour blinks
r Adjust the hour.
[[]: put forward hour.
[]]: put back hour.
Hour entered
t Press [DISP] (CLOCK).
Minute blinks
y Adjust the minute.
[[]: put forward minute.
[]]: put back minute.
Minute entered
u Press [DISP] (CLOCK).
Completed
Note:
¡“ADJUST” is displayed before adjusting the clock.
¡Press and hold [[] or []] to change numbers rapidly.
Clock Setting
[SRC] (PWR: Power)
[DISP] (CLOCK)
[]][[]
(Hour/minute adjustment)
8
7
E
N
G
L
I
S
H
CQ-C3303W
General
Default: 18
Setting range: 0 to 40
Power
Set your car’s ignition switch to the ACC or ON position.
ON:Press [SRC] (PWR).
OFF: Press and hold [SRC] (PWR) for more than
1 second.
Volume
Note:
¡ The volume level can be set independently for each
source. (For radio, one volume setting for AM, one volume setting for all FMs)
Mute/Attenuation
ON : Press [MUTE].
OFF : Press [MUTE] again.
You can select mute or attenuation. (a Page 20)
Clock Display (at Power Off)
When the power of the unit is set to OFF, press [
DISP
]
(CLOCK
).
Clock time (Default)
(Display off)
When the power is set to ON, refer to the description for
each source mode.
Up
Down
indicator
[DISP] (CLOCK)
[MUTE] (Mute/attenuation) [SQ] (Sound Quality)
[SRC: Source]
(PWR: Power)
Remote control sensor
(a Page 6)
Radio Mode Display
(aPage 10)
[VOLUME]
Level Meter
(aPage 20)
SQ indicator
AUX (AUX in)
To a line output of an external
sound/audio device (ex. Siliconaudio player, HDD player, etc.)
9
8
E
N
G
L
I
S
H
CQ-C3303W
SQ (Sound Quality)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music
type.
Press [SQ] to select the sound type as follows:
Press [DISP] to return to the regular mode.
Note:
¡ Settings of SQ, bass/treble and volume are influenced
one another. If such an influence causes distortion to
the audio signal, readjust bass/treble or volume.
(a Page 18)
(VOCAL) clear sound:
emphasizes middle tone and slightly
emphasizes treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(FLAT) flat frequency response:
does not emphasize any part. (Default)
Source
Press
[SRC]
to change the source.
Radio
CD Player
MP3 Player
AUX
(Sound source connecting to
the front AUX input terminal
a
Page 8, 20)
(When an MP3 data disc is in
the player aPage 14)
OR
(
a
Page 13)
(aPage 10)
Caution
¡Set the volume level to low enough before the
AUX connection is completed.
Failure to observe this, the loud noise may
come out and damage your speakers and your
hearing.
10
9
E
N
G
L
I
S
H
CQ-C3303W
q
Radio Mode
Press [SRC] to select the radio mode.
w
Band
Press [BAND].
e
Tuning
[[]: Higher frequency
[]]: Lower frequency
Press and hold [[] or []] for more than 0.5
seconds, then release it. Seeking will start.
Display Change
Press [DISP] to change the display as follows.
Radio
Band Frequency
Preset number
F
requency
Clock time
[]][[] (TUNE)
[BAND] (APM: Auto Preset Memory)
[SRC] (Source)
[DISP] (Display)
Preset Buttons [1] to [6]
(Preset station)
(Stereo) indicator
11
10
E
N
G
L
I
S
H
CQ-C3303W
Auto Preset Memory (APM)
With this operation, stations with good receiving conditions can be automatically stored in the preset memory.
q Select a band. (a Previous page)
w Press and hold [BAND] (APM) for more than 2 sec-
onds.
6 stations with first to 6th highest in signal strength will
be preset to each band.
Once set, the preset stations are sequentially scanned
for 5 seconds each. (scanning)
Note:
¡ To stop scanning, press one of the buttons from [1] to
[6].
Manual Preset Memory
With this operation, a station can be manually stored in the
preset memory.
q Select a band and frequency. (a Previous page)
w Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
Preset number
Station Preset
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM band selections.
Note:
¡ New stations overwrite existing saved stations after these procedures.
Warning
¡To ensure safety, never attempt to preset stations while you are driving.
Preset Station Calling
q Select a band. (a Previous page)
w Press one of the preset buttons from [1] to [6].
Disc Insert
q Press [OPEN].
w Insert a disc.
Note:
¡It may take some time to start playing.
e Close the face plate manually.
r Playback will start automatically after recognizing the
data of the loading disc.
OR
(a Page 14 about MP3 Player)
Disc Eject
q Press [OPEN].
w
Press [u] and take the disc out.
e Close the face plate manually.
12
11
E
N
G
L
I
S
H
CQ-C3303W
Before Disc Playback
Printed Side
Disc Indicator
[u] (Eject)
[OPEN]
CD-R CD-RW CD-TEXT CD-ROM
CD-DA CD-DA CD-DA –
MP3 MP3–MP3
Caution
¡ Do not insert a disc when indicator lights
because a disc is already loaded.
¡ 8 cm discs are not available for this unit, there-
fore, do not insert them.
¡ Do not use irregularly shaped discs.
¡ Do not use discs that have a seal or label attached.
¡ To avoid damaging the face plate, do not push it
down or place objects on it while it is open.
¡ Do not pinch your finger or hand in the face plate.
¡ Do not insert foreign objects into the disc slot.
Available Discs
Note:
¡ Refer to the section on “Notes on MP3” (
a Page 16)
and “Notes on Discs” (
a Page 23).
¡ The power will be turned on automatically when a disc
is loaded.
¡ A disc which has both CD-DA data and MP3 data on it
may not be reproduced normally.
When CD is in the player
Press [SRC] to select the CD player mode and playback
starts.
Display Change
Press [DISP].
Note:
¡
“
NO TEXT
”
is displayed when there is no information on
the disc.
¡ To have another circle scroll while a title is displayed,
press [3] (SCROLL). If the number of displayed characters is 8 or less, the characters do not scroll.
Track Selection
[d]: Next track
[s]: Beginning of the current track
For the previous track, press twice.
Fast Forward/Fast Reverse
Press and hold
[d] (f): Fast forward
[s] (a): Fast reverse
Release them to resume normal playback.
Pause (y / 5)
Press [BAND] (y / 5).
Press [BAND] (y / 5) again to cancel.
Random Play
All the available tracks are played in a random sequence.
Press [4] (RANDOM). lights.
Press
[4] (RANDOM) again to cancel.
Scan Play
The first 10 seconds of each track is played in sequence.
Press [5] (SCAN).
Press [5] (SCAN) again to cancel.
Repeat Play
The current track is repeated.
Press [6] (REPEAT). lights.
Press
[6] (REPEAT) again to cancel.
13
12
E
N
G
L
I
S
H
CQ-C3303W
CD Player
Track Play time
Track/play time
Clock time
Track title
Disc title
[BAND]
(
y / 5:: Pause/play)
[DISP] (Display)
[SRC] (Source)
[s] / [d] (a / f)
(Track selection/
fast forward/fast reverse)
[3] (SCROLL)
[4] (RANDOM)
[5] (SCAN)
[6] (REPEAT)
indicator
indicator
Loading...