Panasonic CQ-C1103W Operating Instructions Manual
YFM284C499CA PTW1205-2 Printed in China(Y)
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
CD Player/Receiver
Model: CQ-C1103W
Operating Instructions
¡Please read these instructions carefully before using this product and keep this manual for future reference.
English
Before Reading These Instructions
Panasonic welcomes you to our constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and
assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of
enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.
Accessories
Operating Instructions
(English: YFM284C499CA)
(: YFM284C501CA)
(Deutsch: YFM284C502CA)
Q'ty: 1 set
Installation Instructions
(YFM284C503CA)
Q'ty: 1
Installation kit (ZZBISC1101U-J)
Lock Cancel Plate
(FX0214C385ZA)
Q'ty: 2
Mounting Bolt
(YEJV014C002N)
Q'ty: 1
Rubber Bushing
(YFS014C095ZA)
Q'ty: 1
Mounting Collar *
(FX0214C384ZA)
Q'ty: 1
Trim Plate *
(YFC054C079YA)
Q'ty: 1
Power Connector
(YGAJ021012)
Q'ty: 1
Notes:
¡ The number in parentheses underneath each accessory part name is the part number for maintenance and service.
¡ Accessories and their part numbers are subject to modification without prior notice due to improvements.
¡ Mounting Collar and Trim Plate are mounted on the main unit at shipment. *
Specifications
General
Power supply :12 V DC (11 – 16 V DC), test voltage
14.4 V, negative ground
Current consumption :Less than 2.2 A (CD mode; 0.5 W x 4
channels)
Maximum power output :45 W x 4 channels (at 1 kHz), volume
control maximum
Power output : 16 W x 4 channels (1 kHz, 1 %, 4 Ω)
Tone adjustment range :Bass: ±12 dB at 100 Hz, Treble: ±12
dB at 10 kHz
Speaker impedance :4 – 8 Ω
Dimensions (W x H x D) :178 x 50 x 155 mm
Weight :1.3 kg
CD Player
Sampling frequency :8 times oversampling
DA converter :1 bit DAC System
Pick-up type :Astigma 3–beam
Light source :Semiconductor laser
Wave length : 790 nm
Frequency response :20 Hz – 20 kHz (±1 dB)
Signal to noise ratio :96 dB
Wow and flutter :Below measurable limits
Channel separation :75 dB
FM Stereo Radio
Frequency range :87.5 MHz – 108 MHz
Usable sensitivity :6 dB/µV (S/N 30 dB)
Frequency response :30 Hz – 15 kHz (±3 dB)
Alternate channel selectivity :75 dB
Stereo separation :35 dB (1 kHz)
Image rejection ratio :55 dB
IF rejection ratio :100 dB
Signal to noise ratio :62 dB
AM Radio
Frequency range :531 kHz – 1 602 kHz
Usable sensitivity :28 dB/µV (S/N 20 dB)
Notes:
¡ Specifications and design are subject to modification without
notice due to improvements.
¡ Some figures and illustrations in this manual may be different
from your product.
Preparation
The 24-hour system is used for the clock.
1
Turn the ignition switch
until the accessory indicator lights.
2
Press [SRC] (PWR:
Power).
3
Press [DISP] (CLOCK).
4
Hold down [DISP] (CLOCK) for more than
2 seconds.
5
Adjust the hour.
[[]: sets the hour ahead.
[]]: sets the hour back.
6
Press [DISP] (CLOCK).
7
Adjust the minute.
[[]: sets the minute ahead.
[]]: sets the minute back.
8
Press [DISP] (CLOCK).
Notes:
¡ “AdJ” is displayed before adjusting the clock.
¡ Hold down []] or [[] to change numbers rapidly.
Clock Display at Power Off
Press [DISP] (Display) to change the display.
Clock Setting
Display off
Clock display
A
C
C
O
N
Loading...