Panasonic kx-tpa50, B02 User Manual

Installation Manual

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

Additional Cordless Handset

Model No. KX-TPA50 B02

Thank you for purchasing a Panasonic product.

This unit is an additional handset compatible with the following
series of Panasonic SIP Cordless Phone:
KX-TGP500/KX-TGP550
Y ou must register this handset with your base unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. For further
details, please read the base unit’s User Guide on the
Panasonic Web site at:

http://panasonic.net/pcc/support/sipphone/
Charge the batteries for about 6 hours before initial use.

Please read this installa ti on man u al be fo re using the unit and
save it for future reference.

Accessory information

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

Supplied accessories

Accessory item/Part number Quantity

Charger/PNLC1007ZB 1
AC adaptor/PQLV219EX or PQLV219EZ 1
Rechargeable batteries
Handset cover
Belt clip/PNKE1029Z1 1

*1 Please read the replacement battery information section of the base

unit’s User Guide on the Panasonic Web site. See page 1 for
Panasonic URL.

*2 The handset cover comes attached to the handset.

Note:

LPlease read the additional/replacement accessory section of the base

unit’s User Guide on the Panasonic Web site. See page 1 for
Panasonic URL.

*2

*1

/HHR-65AAAB 2

1

Setting up

Connections

(220-240 V AC,
50/60 Hz)

Hooks

– 2 –

Note:

VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]

LUse only the supplied Panasonic AC adaptor PQLV219E.
LThe AC adaptor must remain connected at all times. (It is normal for

the adaptor to feel warm during use.)

Battery installation/Battery charge

Important:

LUse the supplied rechargeable batteries. For replacement, we

recommend using the Panasonic rechargeable batteries noted in the
base unit’s User Guide on the Panasonic Web site. See page 1 for
Panasonic URL.

LWipe the battery ends (S, T) with a dry cloth.
LAvoid touching the battery ends (S, T) or the unit contacts.
LConfirm correct polarities (S, T).
LUSE ONLY Ni-MH batteries AAA (R03) size.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.

Charge for about 6 hours.
LWhen the batteries are fully charged, the charge indicator goes off.

Charge indicator

Rechargeable
Ni-MH ONLY

Confirm
“Charging” is
displayed.

Note:

LIf the batteries are fully charged, but the operating time seems to be

shorter, clean the battery ends (S, T) and the charge cont acts with a
dry cloth and charge again.

– 3 –