Panasonic AW-HE60SE, AW-HE60HE, AW-HE60HN User Manual

Operating Instructions

HD Integrated Camera

Model No.

AW‑HE60HN

AW‑HE60SN AW‑HE60HE AW‑HE60SE

 HowtheOperatingInstructionsareconfigured

<Basics>:

The <Basics> describes the procedure for basic operation and installation. Before installing this unit, be

sure to take the time to read through <Basics> to ensure that the unit will be installed correctly.

<Operations and Settings> (this manual): This <Operations and Settings> describes how to operate the unit and how to establish its settings.

ENGLISH

VQT4M09A(E)M0712MS0 -FJ

Trademarks and registered trademarks

Abbreviations

p Microsoft®, Windows®, Windows® 7, Internet Explorer®,

ActiveX

and DirectX® are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

p Intel

and Intel® CoreTM are trademarks or registered trademarks of Intel Corporation in the United States and other countries.

p Adobe

and Reader® are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

p HDMI, the HDMI logo and High-Definition Multimedia

Interface are the trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.

p Apple, Mac, Mac OS, iPhone, iPod Touch, iPad, and Safari

are registered trademarks of Apple Inc., in the United States and other countries.

p Android

is a trademark of Google Inc.

p Other names of companies and products contained

in these Operating Instructions may be trademarks or registered trademarks of their respective owners.

About copyright and licence

Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export laws of the software provided with this unit are expressly prohibited.

The following abbreviations are used in this manual.

p Microsoft

Windows® 7 Professional SP1 32/64-bit is

abbreviated to “Windows 7”.

p Microsoft

Windows

Windows® XP Professional SP3 and Microsoft®

XP Home Edition SP3 are abbreviated to

“Windows XP”.

p Windows

Explorer

Internet Explorer® 8.0 and Windows® Internet

9.0 are abbreviated to “Internet Explorer”.

For the purposes of this manual, the model numbers of the units are given as listed in the table below.

Model number

of unit

AW-HE60HN

AW-HE60HE

AW-HE60SN

AW-HE60SE

AW-HE60HN

AW-HE60HE

AW-HE60SN

AW-HE60SE

AW-HS50N

AW-HS50E

AW-PS550N

AW-PS550E

AW-RP50N

AW-RP50E

AW-RP555N

AW-RP555L

AW-RP655N

AW-RP655L

AW-CA20T6G AW‑CA20T6

Model number

given in manual

AW‑HE60

AW‑HE60H

AW‑HE60S

AW‑HS50

AW‑PS550

AW‑RP50

AW‑RP555

AW‑RP655

Illustrations and screen displays featured in the manual

p What is shown in the manual’s illustrations and screen

displays may differ from how it is actually appears.

p Functions which can be used by Windows only are

indicated using the

mark.

Contents

Before use ...........................................................................4

Overview ..........................................................................4

Required personal computer environment .......................4

Disclaimer of warranty......................................................5

Network security ..............................................................5

Concerning the plug-in viewer software ...........................6

Basic shooting operations ................................................7

How to turn the power on and off ..................................... 8

Turning the power on .......................................................8

Turning the power off .......................................................9

Selecting the units ............................................................10

Selecting the shooting modes (scene files) ................... 10

Types of shooting modes ...............................................10

How to select the shooting mode ...................................11

Shooting ............................................................................13

What to do when encountering problems

in the basic shooting operations ................................14

More advanced operations ..............................................15

Manual shooting ...............................................................16

Manually adjusting the focus .......................................... 16

Manually adjusting the iris .............................................. 17

Manually adjusting the shutter speed ............................18

Manually adjusting the gain ...........................................19

Preset memories ...............................................................20

White balance adjustment ............................................... 23

White balance adjustment .............................................. 23

Black level (master pedestal) adjustment ......................27

Black level (master pedestal) adjustment.......................27

Genlock adjustment (AW‑HE60S only) ........................... 29

Genlock adjustment .......................................................29

Camera menu items .........................................................40

Setting the camera menu items .....................................40

Top Menu screen ...........................................................40

Camera screen (when FullAuto is selected) ..................41

Camera screen (when Manual1 to 3 is selected) ........... 41

Contrast screen .............................................................. 42

Picture 1/2 screen ..........................................................43

Picture 2/2 screen ..........................................................44

16-axis color matrix ........................................................45

System screen ...............................................................46

Genlock screen (AW-HE60S only) .................................46

Output screen ................................................................47

Other 1/2 screen ............................................................ 49

Other 2/2 screen ............................................................ 50

Maintenance screen ....................................................... 51

Firmware Version screen ...............................................51

IP Network screen .......................................................... 52

Camera menu item table ..................................................53

Controls and settings from web screen .........................55

Displaying the web screen

using a personal computer ........................................ 56

Live screen: Single display mode ...................................58

Live screen: Multi display mode ..................................... 63

Setup screen ..................................................................64

Displaying the web screen using a mobile terminal .......96

System log displays .......................................................100

Limiters ............................................................................101

Setting/releasing the limiters ........................................102

Basic limiter operations ................................................102

Setting the limiters .......................................................102

Releasing the limiters ................................................... 103

Resetting the limiters ...................................................103

Basic operations ...............................................................32

When performing the operations

using the wireless remote control ..............................34

Control exercised from the Multi-Function

Controller AW-RP655 ................................................35

Control exercised from the Multi Hybrid

Control Panel AW-RP555 ..........................................37

Control exercised from the Remote

Camera Controller AW-RP50 .................................... 39

Safe mode .......................................................................104

Concerning the safe mode ...........................................104

Notes on Windows

System requirements for a personal computer ............105

Trademarks and Registered Trademarks .....................105

Precautions when using Windows 7 ............................106

Index ................................................................................ 111

7 .....................................................105

Before use

pwOverview

p This unit is a compact full HD camera integrated with a

pan-tilt head and featuring a 1/3-type full HD MOS sensor and digital signal processor (DSP).

p In addition to its optical 18 zoom lens, the unit comes

with a 10 digital zoom to achieve high-quality shooting that overflows with ambiance.

p The unit features a night mode, making it possible to shoot

even under very-low-brightness conditions by exposing subjects to infrared rays.

p Two models are available: the HDMI model AW-HE60H

which is ideal for distributing the signals of TV conference and other video events, and the SDI output model AW-HE60S which is ideal for creating content. IP video transfer and IP control can be performed for both models. It is also possible to connect to an existing camera controller using serial control.

pwRequired personal computer

environment

CPU Intel® CoreTM2 DUO 2.4 GHz or faster or

CPU with the equivalent specifications

Memory [When using Windows]

Network function

Image display function

Supported operating system and Web browser

512 MB or more (When using Microsoft 7: 1 GB [32 bits] or 2 GB [64 bits] or more)

[When using Mac OS X]

2 GB or more

10Base-T or 100Base-TX port 1

Resolution: 1024  768 pixels or

Color generation: True Color 24 bits or

Microsoft SP1 64-bit*

Microsoft® Windows® 7 Professional SP1 32-bit*

Windows® 7 Professional

Windows® Internet Explorer® 8.0* Windows® Internet Explorer® 9.0*

Windows®

Microsoft® Windows® XP Home Edition

SP3* Microsoft® Windows® XP Professional

Edition SP3*

Apple

Mac OS X v10.5

Safari 5.0.6

Apple

Mac OS X v10.6 Safari 5.1.5

Apple

Mac OS X v10.7 Safari 5.1.5

*1: This cannot be used in the

Windows

*2: This cannot be used with the 64-bit

version of Internet Explorer

*3: The Microsoft

Professional x64 Edition is not supported.

Other CD-ROM drive

(for using the Operating Instructions and various software)

DirectX

Adobe

9.0c and up

Reader

(for browsing the Operating Instructions on the CD-ROM)

XP compatibility mode.

8.0.

Windows® XP

Before use

(continued)

IMPORTANT

p Failure to provide the required personal computer

environment may slow down the delineation of the images on the screen, make it impossible for the web browser to work and cause other kinds of problems.

p When using Microsoft® Windows® 7, refer to the “Notes on

Windows environment that is required and on the precautions and other items.

7” (page 105) for details on the personal computer

pwDisclaimer of warranty

IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

1 ANY DAMAGE AND LOSS, INCLUDING WITHOUT

LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;

2 PERSONAL INJURY OR ANY DAMAGE CAUSED BY

INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;

3 UNAUTHORIZED DISASSEMBLE, REPAIR OR

MODIFICATION OF THE PRODUCT BY THE USER;

4 INCONVENIENCE OR ANY LOSS ARISING WHEN

IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;

5 ANY PROBLEM, CONSEQUENTIAL

INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;

6 ANY DEMANDS FOR COMPENSATION, CLAIMS,

ETC. OCCASIONED BY THE INFRINGEMENT OF PRIVACY BY INDIVIDUALS OR ORGANIZATIONS WHOSE IMAGES WERE SHOT BY THE USER BECAUSE THESE IMAGES (INCLUDING THE RECORDINGS MADE) WERE MADE AVAILABLE BY THE USER BECAUSE IN THE PUBLIC DOMAIN FOR SOME REASON OR OTHER OR BECAUSE THE IMAGES ENDED UP BEING USED FOR PURPOSES OTHER THAN THE ONE DESCRIBED ABOVE;

7 LOSS OF REGISTERED DATA CAUSED BY ANY

FAILURE.

pwNetwork security

As you will use this unit connected to a network, your attention is called to the following security risks.

1 Leakage or theft of information through this unit

2 Use of this unit for illegal operations by persons with

malicious intent

3 Interference with or stoppage of this unit by persons

with malicious intent

It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks.

p Use this unit in a network secured by a firewall, etc. p If this unit is connected to a network that includes

personal computers, make sure that the system is not infected by computer viruses or other malicious entities (using a regularly updated antivirus program, anti-spyware program, etc.).

p Protect your network against unauthorized access by

restricting users to those who log in with an authorized user name and password.

p Apply measures such as user authentication to protect

your network against leakage or theft of information, including image data and authentication information (user names and passwords).

p Do not install the camera in locations where the camera or

the cables can be destroyed or damaged by persons with malicious intent.

Usage restrictions

Use of the same segment is recommended for the network in which the unit and the controller or personal computer are connected. If the equipment uses connections with different segments, events based on the settings inherent to the network equipment, for instance, may occur so check this thoroughly prior to operation.

Before use

(continued)

pwConcerning the plug‑in viewer

software

p This is necessary only when using a personal computer

running Windows.

In order to display the IP videos on this unit, the “Network Camera View4” plug-in viewer software must be installed. Either install the software directly from the unit or click the [Install] button of the “plug-in viewer software” on the menu of the CD-ROM supplies, and follow the on-screen instructions to install the software.

英語版要入手

p When the unit is purchased, “Automatic installation

of viewer software” is set to “On”. Refer to page 65 if a message appears on the information bar of the browser.

p When a Live screen is first displayed from the personal

computer, the screen on which to install ActiveX required to display the camera images appears. Follow the on-screen instructions to install the software.

p If the installation screen is displayed every time the screen

is switched even after ActiveX has been installed, reboot the personal computer.

p A license to use the plug-in viewer software is required

for every personal computer which uses the software. The number of times the plug-in software has been automatically installed can be checked on the “Product info. screen” (page 92) under “Maintenance” (page 91). Consult the dealer from whom you purchased the unit concerning these licenses.

Basic shooting operations

1 Set the subject brightness to the appropriate

level.

2 Turn on the power of all the units and devices

in the system.

3 Select the unit to be operated.

Even when using only one unit, it must still be selected from the wireless remote control or controller.

4 Select the shooting mode.

Select one of the four (FullAuto, Manual1, Manual2 and Manual3) preset shooting modes (scene files), each of which corresponds to a set of circumstances in which the subject will be shot. Select the mode that satisfies the shooting conditions and suits your preferences. When continuing to shoot in the same circumstances, there is no need to select another mode.

5 Start shooting.

(After shooting, turn off the power of all the units and devices in the system.)

With the basic operations, it is assumed that the focus, iris and white balance will be adjusted automatically (as per the factory settings).

If the settings have already been changed and the original settings are to be restored, refer to the “What to do when encountering problems in the basic shooting operations” (page 14) and “Camera screen” (page 41) in “Camera menu items”.

Note

p If “FullAuto” has been selected as the setting

for Scene on the camera menu, for example, all the auto settings will be turned on, and manual operations will no longer be possible for some of the items.

How to turn the power on and off

pwTurning the power on

When performing the operations

using the wireless remote control

1 Set all the power switches of the units and

devices connected in the system to ON.

p This unit does not have a power switch.

When power is supplied to it, the status display lamp will light up orange. The initial operation is then performed, and after this the unit is set to the standby mode.

2 Press one of the [CAM1] to [CAM4] buttons on

the wireless remote control to select the unit.

3 Press the [ON/STANDBY] button on the

wireless remote control for 2 seconds.

The POWER ON mode is established, images are output, and control can be exercised.

p The unit’s status display lamp now lights up green.

Notes

p It takes about 30 seconds per unit for the initial

settings operation to be completed. During this period, the unit cannot be operated. (Status display lamp: light up orange)

p When transferring to the STAND BY mode

(Status display lamp: Orange) The pan/tilt position is stored in the memory, and the pan/tilt unit is moved so that it points backwards.

p When transferring to the POWER ON mode

(Status display lamp: Green (after the initial setting operation is completed)) The pan/tilt unit is moved to the position which was stored in the memory when the transition to the STAND BY mode was made.

p POWER ON preset

The pan/tilt unit is moved to the setting, which was established immediately prior to the transition to the STAND BY mode, when the power has been turned on.

p If the power is turned off without transferring to the

STAND BY mode, the pan/tilt unit position will not be stored in the memory or reflected in the POWER ON preset. The zoom position is stored using the setting established immediately before the power is turned off.

When performing the operations using the controller

When the AW‑RP655 or AW‑RP555 is connected:

1 Set all the power switches of the units and

devices connected in the system to ON.

p This unit does not have a power switch.

When power is supplied to it, the status display lamp will light up orange. The initial operation is then performed, and after this the unit is set to the standby mode.

2 Set the [OPERATE] switch on the controller to

ON.

The POWER ON mode is established, images are output, and control can be exercised.

p The unit’s status display lamp now lights up green.

Notes

p It takes about 30 seconds per unit for the initial

settings operation to be completed. During this period, the unit cannot be operated. (Status display lamp: light up orange)

p When transferring to the STAND BY mode

(Status display lamp: Orange) The pan/tilt position is stored in the memory, and the pan/tilt unit is moved so that it points backwards.

p When transferring to the POWER ON mode

p POWER ON preset

The pan/tilt unit is moved to the setting, which was established immediately prior to the transition to the STAND BY mode, when the power has been turned on.

p If the power is turned off without transferring to the

Before setting the [OPERATE] switch on the controller to ON, be absolutely sure to set all the power switches of the units and devices connected in the system to ON.

4 If a multiple number of units are going to be

used, repeat steps

The unit’s status display lamp blinks green when a signal matched by the remote control ID has been received, and it blinks orange when a signal that is not matched by the remote control ID has been received.

2 and 3 as required.

For further details, refer to the Operating Instructions of the controller.

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

How to turn the power on and off

(continued)

pwTurning the power off

When performing the operations

using the wireless remote control

1 Press one of the [CAM1] to [CAM4] buttons on

the wireless remote control to select the unit.

2 Press the [ON/STANDBY] button on the

wireless remote control for 2 seconds.

The unit’s power is turned off.

p The unit’s status display lamp now lights up orange.

3 If a multiple number of units are going to be

used, repeat steps

1 and 2 as required.

4 Set all the power switches of the units and

devices connected in the system to OFF.

Notes

p When transferring to the STAND BY mode

(Status display lamp: Orange) The pan/tilt position is stored in the memory, and the pan/tilt unit is moved so that it points backwards.

p When transferring to the POWER ON mode

p POWER ON preset

The pan/tilt unit is moved to the setting, which was established immediately prior to the transition to the STAND BY mode, when the power has been turned on.

p If the power is turned off without transferring to the

When performing the operations using the controller

When the AW‑RP655 or AW‑RP555 is connected:

1 Set the [OPERATE] switch on the controller to

OFF.

The power of all the cameras (including the unit) connected to the controller is turned off.

p The unit’s status display lamp now lights up orange.

2 Set all the power switches of the units and

devices connected in the system to OFF.

Notes

p When transferring to the STAND BY mode

(Status display lamp: Orange) The pan/tilt position is stored in the memory, and the pan/tilt unit is moved so that it points backwards.

p When transferring to the POWER ON mode

p POWER ON preset

The pan/tilt unit is moved to the setting, which was established immediately prior to the transition to the STAND BY mode, when the power has been turned on.

p If the power is turned off without transferring to the

For further details, refer to the Operating Instructions of the controller.

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

Selecting the units

Up to four units can be operated using one wireless remote control. Up to five units and devices can be operated using one controller. Select the unit (or units) to be operated from the wireless remote control or controller. Even when using only one unit, it must still be selected.

When performing the operations

using the wireless remote control

1 Press the [CAM1], [CAM2], [CAM3] or [CAM4]

button.

When performing the operations using the controller

When the AW‑RP655 is connected:

1 Press the [1], [2], [3], [4] or [5] button of

[CONTROL/PREVIEW MONITOR OUT SEL].

When the AW‑RP555 is connected:

1 Press the [1], [2], [3], [4] or [5] button of

[CONTROL].

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

Selecting the shooting modes (scene files)

pwTypes of shooting modes

This unit has four preset shooting modes, each of which corresponds to a set of circumstances in which the subject will be shot. Select the mode that satisfies the shooting conditions and suits your preferences. The settings can be changed by menu operations.

p The results of the white balance and other adjustments

are stored in the memory separately by shooting mode. Be absolutely sure to select the shooting mode before making any adjustments.

Note

p If “FullAuto” has been selected as the setting

for Scene on the camera menu, for example, all the auto settings will be turned on, and manual operations will no longer be possible for some of the items.

FullAuto

The shutter speed and lens iris setting are adjusted automatically.

Manual1

The settings of your preferences can be established in line with the shooting scene, lighting and other conditions.

Manual2

The settings of your preferences can be established in line with the shooting scene, lighting and other conditions.

Manual3

The settings of your preferences can be established in line with the shooting scene, lighting and other conditions.

Selecting the shooting modes (scene files)

(continued)

pwHow to select the shooting

mode

When performing the operations

using the wireless remote control

2, 8 1

3, 5, 7

4, 6, 7

1 Press the [CAM1], [CAM2], [CAM3] or [CAM4]

button to select the unit.

2 Press the [MENU] button for 2 seconds.

The Top Menu is displayed.

4 Press the [] button.

The “Camera” sub-menu is displayed on the monitor.

C a m e r a

Scen e F ul l A ut o Con t r a s t L e v e l 0 Day / N i g h t Da y

Retu r n

5 Press the [] or [] button to bring the cursor

to “Scene”.

6 Press the [] button.

The shooting mode blinks.

7 Press the [] or [] button to select the

shooting mode (FullAuto, Manual1, Manual2 or Manual3) to be used, and press the [] button to enter the selection.

Top M e n u

Camer a S c e n e : F ul l A ut o Syste m Maint e n a n c e

3 Press the [] or [] button to bring the cursor

to “Camera”.

8 Press the [MENU] button for 2 seconds.

The camera menu display is exited.

Selecting the shooting modes (scene files)

(continued)

When performing the operations using the controller

When the AW‑RP655 is connected:

1 Press one of the [1] to [5] buttons of

[CONTROL/PREVIEW MONITOR OUT SEL] to select the unit which is to be operated.

2 Press the [MENU] button to set the LCD panel

display to the menu mode.

3 Turn the jog dial (main) until CAMERA SETTING

appears, and press the [OK] button.

CAMERA SETTING

OK Key

4 When the scene selection menu has appeared

on the LCD panel, select the scene to be set, and press the [OK] button.

When the AW‑RP555 is connected:

1 Press the [1], [2], [3], [4] or [5] button of

[CONTROL] to select the unit.

2 Press the [1], [2], [3] or [USER] button of

[SCENE FILE] to select the shooting mode.

Shooting mode [SCENE FILE] button

Manual1 [1] Manual2 [2] Manual3 [3]

FullAuto [USER]

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

SCENE HALOGEN

OK Key

The scene names displayed on the LCD panel correlate with the scene files of the AW-HE60 as shown below.

AW‑RP655 display AW‑HE60 scene file

HALOGEN Manual1

FLUORESCENT Manual2

OUTDOOR Manual3

USER FullAuto

5 When the following message appears on the

LCD panel, press the [MENU] button twice to exit the menu mode.

OPEN CAMERA MENU ?

OK Key

Shooting

When performing the operations

using the wireless remote control

pqChanging the camera’s direction

Moving the camera toward the left or right (panning):

Press the [] or [] button.

Moving the camera up or down (tilting):

Press the [] or [] button.

Moving the camera diagonally:

Press the [] or [] button and [] or [] button at

the same time.

Returning the camera to the reference position:

Press the [HOME] button for 2 seconds.

pqUsing the zoom function

Zooming in (the subject becomes magnified in size):

Press the [T] button of [ZOOM].

Zooming out (the subject becomes reduced in size):

Press the [W] button of [ZOOM].

pqSwitching the direction or zoom speed

Changing the direction or zoom at high speed:

Press the [FAST] button.

When this button is held down, the speed can be set to an even higher speed. When it is tapped, the normal speed (high speed) is restored.

Changing the direction or zoom at low speed:

Press the [SLOW] button.

When this button is held down, the speed can be set to an even lower speed. When it is tapped, the normal speed (low speed) is restored.

The lens focus control speed is also changed at the same

time.

When performing the operations using the controller

pqChanging the camera’s direction

Moving the camera toward the left or right (panning):

Tilt the [PAN/TILT] lever toward L or R.

Moving the camera up or down (tilting):

Tilt the [PAN/TILT] lever toward UP or DOWN.

Moving the camera diagonally:

Tilt the [PAN/TILT] lever diagonally.

Returning the camera to the reference position:

If the controller has a [HOME] button, press the

[HOME] button.

pqUsing the zoom function

Zooming in (the subject becomes magnified in size):

Tilt the [ZOOM] lever toward the TELE direction.

Zooming out (the subject becomes reduced in size):

Tilt the [ZOOM] lever toward the WIDE direction.

Note

p The indicator displays of the AW-RP655 are

indicators that show the positions of the optical zoom. They will not work for electronic zooming.

pqChanging the direction or zoom speed

AW‑RP655 and AW‑RP555

1 Press the [SPEED] button.

Each time the [SPEED] button is pressed, the control speed is switched between the high speed (the button’s lamp is off) and low speed (the button’s lamp is lighted). The lens focus control speed is also changed at the same time.

AW‑RP50

Refer to the Operating Instructions of the controller.

What to do when encountering problems in the basic shooting operations

If the trouble is not resolved by taking the action suggested below, refer to “Troubleshooting” (page 43 in the <Basics>).

When performing the operations

using the wireless remote control

The unit does not move.

p Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to

select the unit which is to be operated. If only one unit is being used, it is normally selected using the [CAM1] button.

p Check that the IR ID switches have been set correctly.

(Refer to pages 37 and 40 in the <Basics>.)

p If the unit’s status display lamp is off or lights up orange, it

means that the unit’s power is not on. Refer to “Turning the power on” (page 8), and turn on the power.

p If the unit’s status display lamp does not blink even when

the wireless remote control is operated near the unit’s wireless remote control signal light-sensing area, it means that the wireless remote control’s batteries have run down. Replace the batteries.

Multiple color bands (color bars) are displayed.

Press the [MODE] button to switch to the camera picture.

When performing the operations using the controller

The unit does not move.

p Select the unit to be operated by following the procedure

below.

When the AW‑RP655 is connected:

Press the [1], [2], [3], [4] or [5] button of [CONTROL/ PREVIEW MONITOR OUT SEL].

When the AW‑RP555 is connected:

Press the [1], [2], [3], [4] or [5] button of [CONTROL].

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

p If the [OPERATE] lamp on the controller is off, it means

that the power of the controller is not on.

p If the unit’s status display lamp is off or lights up orange, it

means that the unit’s power is not on. Refer to “Turning the power on” (page 8), and turn on the power.

The menu screen is displayed.

Press the [MENU] button for 2 seconds to exit the camera menu.

The lens focus is not adjusted automatically.

Press the [A/FOCUS] button to switch to auto focusing. (Auto focusing does not work during panning or tilting operations.)

The camera picture is too light or too dark.

1. Press the [A/IRIS] button to switch the lens iris adjustment to auto.

2. Press the [AUTO] button of [GAIN] to switch the gain adjustment to auto.

Something is wrong with the coloring of the camera pictures.

Refer to “Auto tracking white adjustment (ATW)” (page 25), and switch to “ATW”.

The camera menus are not displayed.

When color bar signals are output, the camera menus are not displayed with composite signals. To operate the camera menus with composite signals, set the color bar display to OFF.

Multiple color bands (color bars) are displayed.

Press the [MODE] button to switch to the camera picture.

The menu screen is displayed.

Press the [MENU] button to exit the camera menu.

The lens focus is not adjusted automatically.

Press the [EXT(AF)] button to switch to auto focusing. (Auto focusing does not work during panning or tilting operations.)

The camera picture is too light or too dark.

1. Press the [IRIS] button several times to turn on its lamp, and switch the lens iris adjustment to auto.

2. Press the [GAIN] button several times to turn on its lamp, and switch the gain adjustment to auto.

Something is wrong with the coloring of the camera pictures.

Refer to “Auto tracking white adjustment (ATW)” (page 25), and switch to “ATW”.

The camera menus are not displayed.

When color bar signals are output, the camera menus are not displayed with composite signals. To operate the camera menus with composite signals, set the color bar display to OFF.

More advanced operations

Manual shooting (see pages 16 to 19)

p Manual adjustment of focus p Manual adjustment of iris p Manual adjustment of shutter speed p Manual adjustment of gain

Preset memories (see pages 20 to 22)

p Up to 100 settings for the camera direction (panning and

tilting), zoom, focus, iris, gain up and white balance can be registered in the preset memories, and called.

p The number of settings that can be registered and

called depends on the type of wireless remote control (12 settings) or controller that is used for operation.

White balance adjustment (see pages 23 to 26)

p This adjustment is performed to express the white

accurately. Its setting also has an effect on the color tones of the entire screen.

p It must be performed when using the unit for the first

time or when the unit has not been used for a prolonged period.

p It must be performed when the lighting conditions or

brightness has changed.

p Once the white balance has been attained, no further

adjustment is required provided that the unit is going to be used under the same conditions.

Black level (master pedestal) adjustment (see pages 27 to 28)

p This adjustment is performed to align the black level

(pedestal level) of a multiple number of cameras.

p Ask your dealer to perform this adjustment.

Genlock adjustment (AW‑HE60S only) (see pages 29 to 31)

p This adjustment is performed to achieve phase alignment

by applying external synchronization (genlock) when a multiple number of cameras will be used or when the unit will be used in combination with other devices.

p Ask your dealer to perform this adjustment.

Manual shooting

pwManually adjusting the focus

The lens focus can be adjusted manually.

When performing the operations

using the wireless remote control

1 Press the [M/FOCUS] button to switch the

focus to manual adjustment.

2 Press the [F] or [N] button of [FOCUS] to adjust

the focus.

When the [F] button is pressed, the focus moves further away (far); conversely, when the [N] button is pressed, it moves nearer (near). The speed of focusing and other adjustments can be switched to fast or slow by pressing the [FAST] or [SLOW] button, respectively.

3 If necessary, press the [A/FOCUS] button to

return the focus to the automatic adjustment.

When performing the operations using the controller

When the AW‑RP655 is connected:

1 Press the [EXT(AF)] button to switch the focus

to manual adjustment.

When the AW‑RP555 is connected:

1 Press the [(AF)EXT] button to switch the focus

to manual adjustment.

2 Adjust the focus manually by tilting the

[FOCUS] lever.

Furthermore, every time the [SPEED] button is pressed, the speed of the focusing and other adjustments can be switched to fast or slow.

3 If necessary, press the [(AF)EXT] button to

return the focus to the automatic adjustment.

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

Note

p When the focus is set to manual, the subject may

go out of focus during panning, tilting and zooming. Therefore, the unit comes with a function which compensates for this. (Focus compensation during zooming function: Focus ADJ With PTZ.) This function was set to ON at the factory. If the function has been set to OFF, either adjust the focus, as required, after zooming or set the focus to auto. (See page 49 and page 81.)

2 Adjust the focus manually by turning the dial

above the lit [FOCUS] lamp whether it is the lamp of the [PAN/TILT] lever or [ZOOM] lever.

Furthermore, every time the [SPEED] button is pressed, the speed of the focusing and other adjustments can be switched to fast or slow.

3 If necessary, press the [EXT(AF)] button to

return the focus to the automatic adjustment.

Manual shooting

(continued)

pwManually adjusting the iris

The lens iris can be adjusted manually.

When performing the operations

using the wireless remote control

1 Press the [M/IRIS] button to switch the iris to

manual adjustment.

2 Adjust the iris using the [IRIS +] or [IRIS –]

button.

Press the [IRIS +] button to adjust the lens iris in the opening direction; conversely, press the [IRIS –] button to adjust the lens iris in the closing direction.

3 If necessary, press the [A/IRIS] button to return

the iris to the automatic adjustment.

When the AW‑RP555 is connected:

1 Press the [IRIS] button to turn off its lamp and

switch to manual adjustment.

2 Turn the [LEVEL] dial of [IRIS] to adjust the iris

manually.

The position of the [LEVEL] dial does not represent an absolute value. This is why the brightness may differ from one camera to another even when the dial is set to the same position.

3 If necessary, press the [IRIS] button to turn on

its lamp and switch to automatic adjustment in order to return the iris to automatic adjustment.

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

When performing the operations using the controller

When the AW‑RP655 is connected:

1 Press the [IRIS] button several times to turn

off the button’s lamp and switch to manual adjustment.

2 Adjust the iris manually by turning the dial

above the lit [IRIS] lamp whether it is the lamp of the [PAN/TILT] lever or [ZOOM] lever.

3 If necessary, press the [IRIS] button several

times and turn on its lamp to return the iris to the automatic adjustment.

p In the night mode, the iris is set to open as a theft

prevention measures. Adjust the brightness at the light source.

Manual shooting

(continued)

pwManually adjusting the shutter

speed

The shutter speed can be set using two methods. One is a method that specifies the time (where a time such as 1/250 sec. is designated), and the other is a method that specifies the frequency (where synchro scan, 60.24 Hz*, etc. is designated). When shooting a TV screen or PC monitor screen, the horizontal noise generated when the screen is shot can be minimized by adjusting the frequency to the screen frequency using synchro scan.

*: This describes when the AW‑HE60HN/AW‑HE60SN is used.

When performing the operations

using the wireless remote control

Perform the adjustments on the Camera menu. For further details, refer to the [Shutter Mode] and [Step/Synchro] items on page 42.

When performing the operations using the controller

pq How to set the shutter speed using the AW‑RP555

1 With the [MEMORY] button still held down,

press the [SHUTTER] button.

The [PRESET] [1] to [5] and [6] to [10] buttons blink alternately.

2 Press one of the [1] to [8] buttons or the

[10] [PRESET] button — whichever button corresponds to the shutter speed which is to be set.

Any of the shutter speeds in the table below can be set.

[When 59.94 Hz has been set as the unit’s frequency]

[1] [2] [3] [4] [5]

1/100 1/250 1/500 1/1000 1/2000

[6] [7] [8] [10]

1/4000 1/10000 Synchro Scan OFF

[When 50 Hz has been set as the unit’s frequency]

[1] [2] [3] [4] [5]

1/120 1/250 1/500 1/1000 1/2000

[6] [7] [8] [10]

1/4000 1/10000 Synchro Scan OFF

The procedure is the same as for “When performing the operations using the wireless remote control” in “Basic operations” (pages 32 to 39).

When the AW‑RP555 is connected:

1 Press the [SHUTTER] button and turn its lamp

on.

The shutter speed set ahead of time is selected.

2 If necessary, press the [SHUTTER] button to

turn its lamp off in order to return the shutter to the OFF setting.

p Any change in the shutter speed is reflected the next

time the [SHUTTER] button is pressed and its lamp is turned on.

p When OFF is selected, the shutter will not operate

even when the [SHUTTER] button is pressed.

p Select the synchro scan setting on the menu. p The shutter speed setting performed here is stored in

the memory even when the power of the AW-RP555 is turned off.

For further details, refer to the Operating Instructions of the AW-RP555.

Manual shooting

(continued)

pwManually adjusting the gain

There are two ways to adjust the gain. One way involves using the buttons on the wireless remote control or controller; the other way involves using the Camera menu or Web setting. The gain can be adjusted more precisely using the Camera menu or Web setting. For further details, refer to the [Gain] item on page 42 and page 72.

Note

p When adjusting the gain, the light quantity may

change suddenly (causing the image output to be subjected to a shock).

When performing the operations

using the wireless remote control

1 Press the [OFF], [LOW] or [HI] button.

These buttons enable the gain increase to be selected in three steps. [LOW] is used to select 9 dB; [HI] is used to select 18 dB.

When the AW‑RP555 is connected:

1 Press the [GAIN] button to turn off its lamp.

Each time this button is pressed, one of the three gain increase amounts can be selected in sequence.

The current status is displayed as follows.

[MANU]

[L] lamp

0 dB Off Off Off

LOW Lit Off Off

HIGH Off Lit Off

AUTO Off Off Lit

Other Lit Lit Off

[MANU]

[H] lamp

[GAIN] button

2 If necessary, press the [GAIN] button several

times and turn on its lamp in order to return the gain to the automatic adjustment (AGC).

When the AW‑RP50 is connected:

2 If necessary, press the [AUTO] button in order

to return the gain to the automatic adjustment (AGC).

When performing the operations using the controller

When the AW‑RP655 is connected:

1 Press the [GAIN] button to turn off its lamp, and

then switch to manual adjustment.

The preset gain increase amount is now selected. For further details on the gain increase amount setting, refer to the Operating Instructions of the AW-RP655.

2 If necessary, press the [GAIN] button and turn

on the button in order to return the gain to the automatic adjustment (AGC).

Refer to the Operating Instructions of the controller.

In any case, the maximum gain of the automatic adjustment can be set by the camera menu or Web setting. For further details, refer to the [AGC Max Gain] item on page 42 and page 72.

Preset memories

This unit enables up to 100 settings for the camera direction (panning and tilting), zoom, focus, iris, gain and white balance to be registered in its preset memories, and called. However, the number of settings that can be registered and called depends on the type of wireless remote control or controller that is used for operation.

p The focus and iris operating modes (manual and auto

settings) are neither registered nor recalled. The current focus and iris values are registered.

p The focus and iris values can be recalled only when the

manual settings are applicable.

p AWB A, AWB B or ATW is registered as the white balance

setting. The values selected when AWB was established are recalled as the adjustment values of AWB A or AWB B.

p The AWB Mode (ATW, AWB A or AWB B) stored using

the AW-RP655 are recalled only when the AW-RP655 is connected.

Notes

p When there is a large difference in the environmental

temperature between the time of registration and the time the setting is called, displacement of the preset position may occur.

p If displacement occurs, perform registration again. p While preset settings are being called, it is not

possible to perform manual operations such as panning, tilting, zooming or iris adjustments.

p If, when one set of preset settings has been called,

another set of preset settings is then called, the first set of preset settings which have been called will take precedence.

When performing the operations

using the wireless remote control

Twelve settings (preset No.1 to No.12) can be registered and called using the wireless remote control. The [1] to [12] buttons correspond to the unit’s preset memories No.1 to No.12.

pq Registering the settings in the preset memories

1 Display the picture to be shot on the monitor.

Operate the pan, tilt or zoom buttons to determine the camera angle. Adjust the focus, iris, gain and white balance if they need to be adjusted.

2 While holding down the [PRESET] button, press

the button corresponding to the preset memory number.

p If a preset memory number with an already registered

setting has been selected, the existing setting will be erased and replaced with the new one.

pq Calling the settings of the preset memories

1 Press the button in which the preset memory

setting has been registered.

Preset memories

(continued)

When performing the operations using the controller

When the AW‑RP655 is connected:

Up to 50 settings can be registered and called. The [1] to [50] buttons of [TRACING/PRESET MEMORY] correspond to the unit’s preset memories No.1 to No.50.

pq Registering the settings in the preset memories

1 Set to the preset memory mode.

Press the [TR/PSET] button to turn off its lamp.

2 Set to the memory recording mode.

Press the [M.LOCK] button to turn off its lamp.

3 Display the picture to be shot on the monitor.

Operate the [PAN/TILT] lever and [ZOOM] lever to determine the camera angle. Adjust the focus, iris, gain and white balance if they need to be adjusted.

4 Hold down the [MEMORY] button.

The buttons among the [1] to [50] buttons of [TRACING/ PRESET MEMORY] in which settings can be registered now start blinking in sequence.

p Preset memory settings cannot be registered in

buttons whose lamps are off (since they contain tracing memory settings).

5 With the [MEMORY] button still held down,

press the button of the preset memory number in which the setting is to be registered.

pq Calling the settings of the preset memories

1 Set to the preset memory mode.

Press the [TR/PSET] button to turn off its lamp.

2 Press the button among the [1] to [50] buttons

of [TRACING/PRESET MEMORY] in which the setting was registered.

pq Erasing preset memory settings

1 Set to the preset memory mode.

Press the [TR/PSET] button to turn off its lamp.

2 Set the memory recording mode.

Press the [M.LOCK] button to turn off its lamp.

3 Hold down the [RESET] button.

The buttons among the [1] to [50] buttons of [TRACING/ PRESET MEMORY] whose settings can be erased now start blinking in sequence.

p The settings for the buttons whose lamps are off

cannot be erased (since they contain tracing memory settings).

4 With the [RESET] button still held down, press

the button of the preset memory number whose setting is to be erased.

Preset memories

(continued)

When the AW‑RP555 is connected:

Up to 10 settings can be registered and called. The [1] to [10] buttons of [PRESET] correspond to the unit’s preset memories No.1 to No.10.

pq Registering the settings in the preset memories

1 Display the picture to be shot on the monitor.

Operate the [PAN/TILT] lever and [ZOOM] lever to determine the camera angle. Adjust the focus, iris, gain and white balance if they need to be adjusted.

2 Hold down the [MEMORY] button.

The buttons among the [1] to [10] buttons of [PRESET] in which settings can be registered now start blinking in sequence.

3 With the [MEMORY] button still held down,

press the button of the preset memory number in which the setting is to be registered.

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

pq Calling the settings of the preset memories

1 Press the button among the [1] to [10] buttons

of [PRESET] in which the desired setting was registered.

White balance adjustment

pwWhite balance adjustment

In order for the white to be reproduced accurately, the ratio between the three primary colors (RGB) is adjusted. If the white balance has shifted out of adjustment, not only will the white be reproduced poorly but the color tones of the entire screen will also be degraded.

p This adjustment must be performed when using the

unit for the first time or when the unit has not been used for a prolonged period.

p It must be performed when the lighting conditions or

brightness has changed.

As the type of adjustment used, AWB (automatic white balance adjustment) which is used to adjust the white balance when the AWB button on the controller is pressed, ATW (automatic tracking white balance adjustment) which is used to keep adjusting the white balance at all times, or manual adjustment can be selected.

The results of the AWB adjustment can be stored in two memories, A and B, when “AWB A” or “AWB B” has been selected for the white balance.

p Once the white balance values have been adjusted, their

setup procedure will be completed simply by selecting them using the camera menus or web settings, or by pressing the buttons on the controller, provided that they are going to be used under the same conditions as the ones established when the values were set. There is no need to set it again.

p Once a new setting is entered, the previous setting will be

erased.

Use the two memories to store settings corresponding to different shooting conditions.

pqAutomatic adjustment

(AWB: AWB A or AWB B)

When performing the operations

using the wireless remote control

1 Shoot a white subject (such as a white wall or

handkerchief) so that it fills the screen.

p Do not shoot shiny or very bright objects.

p Steps

2 through 8 represent the procedure for selecting

the “AWB A” or “AWB B” memory. They need not be taken if a selection has already been made.

2 Select Manual1, Manual2 or Manual3 as the

shooting mode by following the procedure in “Selecting the shooting modes (scene files)” (page 11).

C a m e r a

S c e n e Ma n u al 1 C o n t r a s t P i c t u r e C o l o r M a t r i x

R e t u r n

3 Press the [] or [] button to bring the cursor

to “Picture”.

4 Press the [] button.

The “Picture 1/2” sub-menu is displayed.

P i c t u r e 1 / 2

Chro m a L e v e l 0 AWB M o d e A W B A R G a i n 0 B G a i n 0 Deta i l H ig h Fles h T o n e M o d e Of f DNR H ig h

Retu r n

White balance adjustment

(continued)

5 Press the [] or [] button to bring the cursor

to “AWB Mode”.

6 Press the [] button.

“AWB Mode” starts blinking.

7 Press the [] or [] button to change the AWB

mode to be used to “AWB A” or “AWB B”, and press the [] button to enter the selection.

8 Press the [MENU] button for 2 seconds.

The camera menu display is exited.

9 Press the [SET] button for 2 seconds.

The auto white balance adjustment (AWB) is performed, and the white balance setting is entered.

p When the white balance adjustment is completed

successfully, “AWB OK” appears in the center of the screen.

A W B O K

When performing the operations using the controller

When the AW‑RP655 or AW‑RP555 is connected:

1 Shoot a white subject (such as a white wall or

handkerchief) so that it fills the screen.

p Do not shoot shiny or very bright objects.

2 Press the [A] button or [B] button of [WHITE

BAL] to select “AWB A” or “AWB B” for the white balance.

The selected button’s lamp lights.

p The white balance setting is not entered if “ATW” has

been selected.

3 Press the [AWC] button.

The auto white balance adjustment (AWB) is executed, and the white balance setting is entered. The [AWC] button’s lamp blinks while the white balance is being adjusted, and its lamp goes off when the adjustment is completed successfully. Its lamp lights if the white balance could not be adjusted.

p If color bars have been selected (the [MODE] button

or [BAR/CAM] button’s lamp lights) or if ATW is selected (the [ATW] button’s lamp lights), it means that the [AWC] button is not working or that the auto white balance adjustment has failed. (The button’s lamp lights.)

Note

p The white balance cannot be adjusted when color bars

are displayed. Press the [MODE] button to switch to the camera picture.

p When the adjustment has failed, an error message

such as “OUT RANGE NG”, “HIGH LIGHT NG”, “LOW LIGHT NG” or “ATW NG” is displayed.

White balance adjustment

(continued)

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

Notes

p White balance may not be correctly set if the lighting

of the object is too weak.

p Since the unit has a built-in memory, the set white

balance will remain in the memory even if power is turned off. Therefore, it is not necessary to reset the white balance if the color temperature of those objects remains unchanged. However, it must be reset if the color temperature changes, such as when you move from indoors to outside, or vice versa.

pqAuto tracking white adjustment (ATW)

When the white balance adjustment is set to “ATW”, the white balance continues to be adjusted automatically all the time, and it is automatically corrected even when the light source or color temperature has changed to produce completely natural pictures.

This function works when “ATW” is selected instead of “AWB A” or “AWB B” by following the steps for “Automatic adjustment” in “White balance adjustment” (page 23).

Notes

p ATW might not function properly when high brightness

light (ex. fluorescent lamp) beams into a screen.

p White balance may not be accurately set if there is no

white object in the scene being shot.

p The white balance may shift out of adjustment when

a different kind of light source such as sunlight or fluorescent lighting applies.

White balance adjustment

(continued)

pqManual adjustment

(R gain and B gain adjustment)

White balance can be adjusted manually.

When performing the operations

using the wireless remote control

p Steps

1 through 6 represent the procedure for selecting

the “AWB A” or “AWB B” memory. They need not be taken if a selection has already been made.

1 Select Manual1, Manual2 or Manual3 as the

shooting mode by following the procedure in “Selecting the shooting modes (scene files)” (page 11).

C a m e r a

S c e n e Ma n u al 1 C o n t r a s t P i c t u r e C o l o r M a t r i x

6 Press the [] or [] button to change the AWB

mode to be used to “AWB A” or “AWB B”, and press the [] button to enter the selection.

7 Press the [] or [] button to bring the cursor

to “R Gain” or “B Gain.”

8 Press the [] button to make the “R Gain” or

“B Gain” value blink.

9 Press the [] or [] button to change the

“RGain” or “BGain” numerical value, and press the [] button to enter the setting.

When performing the operations using the controller

R e t u r n

2 Press the [] or [] button to bring the cursor

to “Picture”.

3 Press the [] button.

The “Picture 1/2” sub-menu is displayed.

P i c t u r e 1 / 2

Chro m a L e v e l 0 AWB M o d e A W B A R G a i n 0 B G a i n 0 Deta i l H ig h Fles h T o n e M o d e Of f DNR H ig h

Retu r n

4 Press the [] or [] button to bring the cursor

to “AWB Mode”.

When the AW‑RP655 is connected:

1 Press the [R/B GAIN/PED] button several times

so that the “GAIN” item is displayed on the LCD panel.

2 Adjust the R Gain value using the jog dial (L).

3 Adjust the B Gain value using the jog dial (R).

When the AW‑RP555 is connected:

Refer to the Operating Instructions of the controller.

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

5 Press the [] button.

“AWB Mode” starts blinking.

Black level (master pedestal) adjustment

pwBlack level (master pedestal)

adjustment

The black level can be adjusted when using a multiple number of cameras including the unit. Ask your dealer to perform this adjustment. (Use an oscilloscope or waveform monitor for the adjustment.) Adjust the black level in accordance with the units and devices used.

The black level can be adjusted only when Manual1, Manual2 or Manual3 is selected as the shooting mode (scene file).

When performing the operations

using the wireless remote control

1 Press the [M/IRIS] button.

Set the iris to the manual mode.

2 Press the [IRIS –] button.

The lens iris is stopped down.

6 Press the [] or [] button to move to the

“Picture 2/2” sub‑menu, and bring the cursor to “Pedestal”.

P i c t u r e 2 / 2

Pede s t a l 0 DRS Of f Gam m a T y p e N o r ma l Ga m m a L e v e l Mi d Back L i g h t C O M P . Of f Day/ N i g h t Da y

Retu r n

7 Press the [] button to start the “Pedestal”

value blinking.

8 Press the [] or [] button, change the

“Pedestal” value, and press the [] button to enter the selection.

Adjust the black level to a value of approx. 0.035 V.

3 Select Manual1, Manual2 or Manual3 by

following the procedure in “How to select the shooting mode” (page 11) under “Selecting the shooting modes (scene files)”.

4 Press the [] or [] button to bring the cursor

to “Picture”.

5 Press the [] button.

The “Picture 1/2” sub-menu is displayed.

P i c t u r e 1 / 2

Chro m a L e v e l 0 AWB M o d e A W B A R G a i n 0 B G a i n 0 Deta i l H ig h Fles h T o n e M o d e Of f DNR H ig h

Retu r n

9 Press the [MENU] button for 2 seconds.

The camera menu display is exited.

10

If necessary, press the [A/IRIS] button to adjust the iris automatically.

Black level (master pedestal) adjustment

(continued)

When performing the operations using the controller

When the AW‑RP655 is connected:

1 Press the [IRIS] button several times to turn off

its lamp.

Set the iris to the manual ([MANU]) mode.

2 Turn the [FOCUS/IRIS] dial to stop down the

lens iris.

3 Press the [R/B GAIN/PED] button several

times so that the “PEDESTAL TOTAL” item is displayed on the LCD panel.

4 Turn the jog dial (main) and adjust the black

level to 0.035 V.

5 If necessary, adjust the iris automatically.

 Press the [IRIS] button several times to turn on its

lamp.

When the AW‑RP555 is connected:

1 Press the [IRIS] button several times to turn off

its lamp.

Set the iris to the manual ([MANU]) mode.

2 Turn the [LEVEL] dial of [IRIS] to stop down the

lens iris.

3 Follow the operation steps in “Basic

operations” (page 38), and use the camera menu to perform the adjustment.

When the AW‑RP50 is connected:

Refer to the Operating Instructions of the controller.

Genlock adjustment (AW‑HE60S only)

pwGenlock adjustment

The genlock adjustment is performed to achieve phase alignment by applying external synchronization (genlock) when a multiple number of cameras will be used or when the unit will be used in combination with other devices. This unit supports the BBS signal as the genlock signal. Ask your dealer to perform this adjustment. (Use a dual-trace oscilloscope for the adjustment.) (The genlock function is not available with the AW-HE60H.)

pqHorizontal phase adjustment

Observe the waveforms of the external sync signal input (black burst signal) and video signal output on the dual-trace oscilloscope, and use the wireless remote control or controller to bring the horizontal phase into alignment.

External sync signal input (black burst signal)

Video signal output

3 Press the [] button.

The “System” sub-menu is displayed.

S y s t e m

Genl o c k Outp u t Othe r

Retu r n

4 Press the [] or [] button to bring the cursor

to “Genlock”, and press the [] button.

The “Genlock” sub-menu is displayed.

G e n l o c k

Hori z o n t a l P h a s e 0 Subc a r r i e r P h a s e Coa r s e 90 ° Fin e 0 H Ph a s e . S C F i n e S t ep 1

Bring the horizontal phase into alignment.

When performing the operations

using the wireless remote control

1 Follow the operation steps in “Basic

operations” (page 34) to display the Top Menu.

2 Press the [] or [] button to bring the cursor

to “System”.

Top M e n u

Camer a S c e n e : F ul l A ut o Syste m Maint e n a n c e

Retu r n

5 Press the [] or [] button to bring the cursor

to “Horizontal Phase”, and press the [] button.

The “Horizontal Phase” value starts blinking.

6 Press the [] or [] button to change the

“Horizontal Phase” value, adjust the value so that the horizontal phase is brought into alignment, and press the [] button.

7 Press the [MENU] button for 2 seconds.

The camera menu display is exited.

When performing the operations using the controller

These operations can be performed using the camera menus by following the operation steps in “Basic operations” (pages 32 to 39).

Genlock adjustment (AW‑HE60S only)

(continued)

pqColor phase adjustment

The color phase adjustment must be performed if the pictures are to be switched using a video switcher or other device when the video output signals have been set as composite signals. It need not be performed when the video output signals have been set as component signals. The camera’s color phase is aligned with the program output (split color bar output) signals of a color special effect device or other color tones that will serve as the reference. (The color phase can be adjusted more accurately if a vectorscope is used for the adjustment.)

Color bar of camera

Split line

Color bar of special effects generator

When performing the operations

using the wireless remote control

4 Press the [] button.

The “System” sub-menu is displayed.

S y s t e m

Genl o c k Outp u t Othe r

Retu r n

5 Press the [] or [] button to bring the cursor

to “Genlock”, and press the [] button.

The “Genlock” sub-menu is displayed.

G e n l o c k

Hori z o n t a l P h a s e 0 Subc a r r i e r P h a s e Coa r s e 90 ° Fin e 0 H Ph a s e . S C F i n e S t ep 1

1 Press the [MODE] button.

The mode is switched to the color bar display.

2 Follow the operation steps in “Basic

operations” (page 34) to display the Top Menu.

3 Press the [] or [] button to bring the cursor

to “System”.

Top M e n u

Camer a S c e n e : F ul l A ut o Syste m Maint e n a n c e

Retu r n

6 Press the [] or [] button to bring the cursor

to “Coarse” or “Fine” of “Subcarrier Phase”, and press the [] button.

The “Coarse” or “Fine” value starts blinking.

7 Press the [] or [] button to change the

“Coarse” or “Fine” value of “Subcarrier Phase”, adjust the value so that the color phase is brought into alignment, and press the [] button.

8 Press the [MENU] button for 2 seconds.

The menu display is exited.

9 Press the [MODE] button.

The mode is switched to the camera picture display.

+ 84 hidden pages